diff options
| author | Sumit Garg <sumit.garg@nxp.com> | 2018-01-06 09:04:24 +0530 |
|---|---|---|
| committer | York Sun <york.sun@nxp.com> | 2018-01-10 12:31:31 -0800 |
| commit | 10e7eaf04a339bb990e2c20fef607d7a7a18779f (patch) | |
| tree | 3d084925ddeb768e5bc6fb9581e58d1d7334eaa1 /include/configs/ls1088ardb.h | |
| parent | dcb081ba953dcfda54d56a7633a6daf029b87b24 (diff) | |
| download | u-boot-10e7eaf04a339bb990e2c20fef607d7a7a18779f.tar.gz | |
armv8: ls1088a: SPL size reduction
Using changes in this patch we were able to reduce approx 8k
size of u-boot-spl.bin image. Following is breif description of
changes to reduce SPL size:
1. Changes in board/freescale/ls1088a/Makefile to remove
compilation of eth.c and cpld.c in case of SPL build.
2. Changes in board/freescale/ls1088a/ls1088a.c to keep
board_early_init_f funcations in case of SPL build.
3. Changes in ls1088a_common.h & ls1088ardb.h to remove driver
specific macros due to which static data was being compiled in
case of SPL build.
Signed-off-by: Sumit Garg <sumit.garg@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'include/configs/ls1088ardb.h')
| -rw-r--r-- | include/configs/ls1088ardb.h | 20 |
1 files changed, 20 insertions, 0 deletions
diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 1438bec1af..3c6c66624e 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -9,7 +9,9 @@ #include "ls1088a_common.h" +#ifndef SPL_NO_BOARDINFO #define CONFIG_DISPLAY_BOARDINFO_LATE +#endif #define CONFIG_MISC_INIT_R @@ -29,7 +31,9 @@ #endif #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) +#ifndef CONFIG_SPL_BUILD #define CONFIG_QIXIS_I2C_ACCESS +#endif #define SYS_NO_FLASH #undef CONFIG_CMD_IMLS #endif @@ -97,7 +101,11 @@ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } #endif #endif + +#ifndef SPL_NO_IFC #define CONFIG_NAND_FSL_IFC +#endif + #define CONFIG_SYS_NAND_MAX_ECCPOS 256 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 @@ -139,7 +147,10 @@ #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) +#ifndef SPL_NO_QIXIS #define CONFIG_FSL_QIXIS +#endif + #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 #define QIXIS_LBMAP_SWITCH 2 #define QIXIS_QMAP_MASK 0xe0 @@ -223,6 +234,8 @@ #define I2C_RETIMER_ADDR 0x18 #define I2C_MUX_CH_DEFAULT 0x8 #define I2C_MUX_CH5 0xD + +#ifndef SPL_NO_RTC /* * RTC configuration */ @@ -230,6 +243,7 @@ #define CONFIG_RTC_PCF8563 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 /* Channel 3*/ #define CONFIG_CMD_DATE +#endif /* EEPROM */ #define CONFIG_ID_EEPROM @@ -240,12 +254,14 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#ifndef SPL_NO_QSPI /* QSPI device */ #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_QSPI #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 #endif +#endif #define CONFIG_CMD_MEMINFO #define CONFIG_CMD_MEMTEST @@ -260,6 +276,7 @@ #define CONFIG_FSL_MEMAC +#ifndef SPL_NO_ENV /* Initial environment variables */ #if defined(CONFIG_QSPI_BOOT) #define MC_INIT_CMD \ @@ -408,6 +425,7 @@ #define CONFIG_ETHPRIME "DPMAC1@xgmii" #define CONFIG_PHY_GIGE #endif +#endif /* MMC */ #ifdef CONFIG_MMC @@ -415,6 +433,7 @@ #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif +#ifndef SPL_NO_ENV #undef CONFIG_CMDLINE_EDITING #include <config_distro_defaults.h> @@ -423,6 +442,7 @@ func(SCSI, scsi, 0) \ func(DHCP, dhcp, na) #include <config_distro_bootcmd.h> +#endif #include <asm/fsl_secure_boot.h> |