ARM: mxs: Consolidate configuration options

Pull all the duplicate configuration options into configs/mxs.h
from the board configuration files. This reduces the files greatly
and makes them somewhat more readable. Besides, we do no longer
have such a horrible duplication of code.

Note that the mx23evk grew in size slightly. This is due to the
CONFIG_SYS_CBSIZE now being set to 1024 as it is on the rest of
MXS systems.

This patch also fixes the OCRAM size for i.MX23. The i.MX23 has
only 32kB of OCRAM, while i.MX28 has 128kB of OCRAM.

I verified the configuration didn't change for each of the boards,
but I didn't boot-test it on the boards I do not have. I configured
U-Boot for each board using the "make ... <board>_config" command
and then ran "cpp -I include -dM include/config.h" , which dumped
all the configuration options. I did this both before and after this
patch and finally compared the results for each MXS board. Actually,
the results do differ slightly, since the configs/mxs.h file now
properly includes the correct iomux-mx23.h or iomux-mx28.h , so
while comparing, I had to ignore these new defines. These have no
impact on U-Boot configuration though.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Lauri Hintsala <lauri.hintsala@bluegiga.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>

1 files changed, 30 insertions, 162 deletions

diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index 10ccc3bc37..b6fa6ebb3f 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -17,43 +17,17 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
-#ifndef __M28EVK_CONFIG_H__
-#define __M28EVK_CONFIG_H__
+#ifndef __CONFIGS_M28EVK_H__
+#define __CONFIGS_M28EVK_H__
 
-/*
- * SoC configurations
- */
-#define CONFIG_MX28				/* i.MX28 SoC */
-#define CONFIG_MXS_GPIO				/* GPIO control */
-#define CONFIG_SYS_HZ		1000		/* Ticks per second */
 
-/*
- * Define M28EVK machine type by hand until it lands in mach-types
- */
+/* System configurations */
+#define CONFIG_MX28				/* i.MX28 SoC */
 #define MACH_TYPE_M28EVK	3613
-
 #define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK
 
-#include <asm/arch/regs-base.h>
-
+/* U-Boot Commands */
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_ARCH_MISC_INIT
-
-/*
- * SPL
- */
-#define CONFIG_SPL
-#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
-#define CONFIG_SPL_START_S_PATH		"arch/arm/cpu/arm926ejs/mxs"
-#define CONFIG_SPL_LDSCRIPT	"arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds"
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-
-/*
- * U-Boot Commands
- */
 #include <config_cmd_default.h>
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DOS_PARTITION
@@ -82,86 +56,18 @@
 
 #define CONFIG_REGEX			/* Enable regular expression support */
 
-/*
- * Memory configurations
- */
+/* Memory configuration */
 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
 #define PHYS_SDRAM_1			0x40000000	/* Base address */
 #define PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
-#define CONFIG_SYS_MALLOC_LEN		0x00400000	/* 4 MB for malloc */
-#define CONFIG_SYS_GBL_DATA_SIZE	128		/* Initial data */
-#define CONFIG_SYS_MEMTEST_START	0x40000000	/* Memtest start adr */
-#define CONFIG_SYS_MEMTEST_END		0x40400000	/* 4 MB RAM test */
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-/* Point initial SP in SRAM so SPL can use it too. */
-
-#define CONFIG_SYS_INIT_RAM_ADDR	0x00000000
-#define CONFIG_SYS_INIT_RAM_SIZE	(128 * 1024)
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/*
- * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
- * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
- * binary. In case there was more of this mess, 0x100 bytes are skipped.
- */
-#define CONFIG_SYS_TEXT_BASE		0x40000100
-
-/*
- * U-Boot general configurations
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT	"=> "
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
-#define CONFIG_SYS_PBSIZE	\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-						/* Print buffer size */
-#define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
-						/* Boot argument buffer size */
-#define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
-#define CONFIG_AUTO_COMPLETE			/* Command auto complete */
-#define CONFIG_CMDLINE_EDITING			/* Command history etc */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * Serial Driver
- */
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL011_CLOCK		24000000
-#define CONFIG_PL01x_PORTS		{ (void *)MXS_UARTDBG_BASE }
-#define CONFIG_CONS_INDEX		0
-#define CONFIG_BAUDRATE			115200	/* Default baud rate */
-
-/*
- * MMC Driver
- */
-#ifdef	CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_BOUNCE_BUFFER
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXS_MMC
-#endif
 
-/*
- * APBH DMA
- */
-#define CONFIG_APBH_DMA
-
-/*
- * NAND
- */
+/* Environment */
 #define CONFIG_ENV_SIZE			(16 * 1024)
-#ifdef	CONFIG_CMD_NAND
-#define CONFIG_NAND_MXS
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define CONFIG_SYS_NAND_BASE		0x60000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define CONFIG_ENV_IS_IN_NAND
 
 /* Environment is in NAND */
-#define CONFIG_ENV_IS_IN_NAND
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
 #define CONFIG_ENV_RANGE		(512 * 1024)
@@ -190,40 +96,22 @@
 #define CONFIG_ENV_IS_NOWHERE
 #endif
 
-/*
- * Ethernet on SOC (FEC)
- */
-#ifdef	CONFIG_CMD_NET
-#define CONFIG_ETHPRIME			"FEC0"
+/* FEC Ethernet on SoC */
+#ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
-#define CONFIG_MII
-#define CONFIG_FEC_XCV_TYPE		RMII
 #endif
 
-/*
- * I2C
- */
-#ifdef	CONFIG_CMD_I2C
-#define CONFIG_I2C_MXS
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		400000
-#endif
-
-/*
- * EEPROM
- */
-#ifdef	CONFIG_CMD_EEPROM
+/* EEPROM */
+#ifdef CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
 #endif
 
-/*
- * RTC
- */
-#ifdef	CONFIG_CMD_DATE
+/* RTC */
+#ifdef CONFIG_CMD_DATE
 /* Use the internal RTC in the MXS chip */
 #define CONFIG_RTC_INTERNAL
-#ifdef	CONFIG_RTC_INTERNAL
+#ifdef CONFIG_RTC_INTERNAL
 #define CONFIG_RTC_MXS
 #else
 #define CONFIG_RTC_M41T62
@@ -232,32 +120,22 @@
 #endif
 #endif
 
-/*
- * USB
- */
-#ifdef	CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MXS
+/* USB */
+#ifdef CONFIG_CMD_USB
 #define CONFIG_EHCI_MXS_PORT0
 #define CONFIG_EHCI_MXS_PORT1
 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
-#define CONFIG_EHCI_IS_TDI
 #define CONFIG_USB_STORAGE
 #endif
 
-/*
- * SPI
- */
-#ifdef	CONFIG_CMD_SPI
-#define CONFIG_HARD_SPI
-#define CONFIG_MXS_SPI
-#define CONFIG_SPI_HALF_DUPLEX
+/* SPI */
+#ifdef CONFIG_CMD_SPI
 #define CONFIG_DEFAULT_SPI_BUS		2
 #define CONFIG_DEFAULT_SPI_CS		0
 #define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0
 
 /* SPI FLASH */
-#ifdef	CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 #define CONFIG_SF_DEFAULT_BUS		2
@@ -270,18 +148,12 @@
 #define CONFIG_ENV_SPI_MAX_HZ		40000000
 #define CONFIG_ENV_SPI_MODE		SPI_MODE_0
 #endif
+
 #endif
 
-/*
- * LCD
- */
-#ifdef	CONFIG_VIDEO
-#define	CONFIG_CFB_CONSOLE
-#define	CONFIG_VIDEO_MXS
+/* LCD */
+#ifdef CONFIG_VIDEO
 #define	CONFIG_VIDEO_LOGO
-#define	CONFIG_VIDEO_SW_CURSOR
-#define	CONFIG_VGA_AS_SINGLE_DEVICE
-#define	CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define	CONFIG_SPLASH_SCREEN
 #define	CONFIG_CMD_BMP
 #define	CONFIG_BMP_16BPP
@@ -290,22 +162,15 @@
 #define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(512 << 10)
 #endif
 
-/*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
+/* Booting Linux */
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
 #define CONFIG_BOOTCOMMAND	"run bootcmd_net"
 #define CONFIG_LOADADDR		0x42000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
-#define CONFIG_OF_LIBFDT
 
-/*
- * Extra Environments
- */
+/* Extra Environment */
 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"update_nand_full_filename=u-boot.nand\0"			\
 	"update_nand_firmware_filename=u-boot.sb\0"			\
@@ -346,4 +211,7 @@
 		"fi ; "							\
 		"fi\0"
 
-#endif /* __M28EVK_CONFIG_H__ */
+/* The rest of the configuration is shared */
+#include <configs/mxs.h>
+
+#endif /* __CONFIGS_M28EVK_H__ */