Merge branch 'master' of git://git.denx.de/u-boot into resolve

Conflicts:
	README
	board/samsung/universal_c210/universal.c
	drivers/misc/Makefile
	drivers/power/power_fsl.c
	include/configs/mx35pdk.h
	include/configs/mx53loco.h
	include/configs/seaboard.h

1 files changed, 66 insertions, 71 deletions

diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 350150b115..964bfcd440 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -38,6 +38,7 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe4
 #define __SW_BOOT_SD		0x54
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1020UTM)
@@ -46,6 +47,7 @@
 #define __SW_BOOT_MASK		0x03
 #define __SW_BOOT_NOR		0xe0
 #define __SW_BOOT_SD		0x50
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1020RDB)
@@ -61,6 +63,7 @@
 #define __SW_BOOT_SD		0x9c
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1021RDB)
@@ -78,6 +81,7 @@
 #define __SW_BOOT_SD		0x9c
 #define __SW_BOOT_NAND		0xec
 #define __SW_BOOT_PCIE		0x6c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1024RDB)
@@ -91,6 +95,7 @@
 #define __SW_BOOT_SPI		0x08
 #define __SW_BOOT_SD		0x04
 #define __SW_BOOT_NAND		0x0c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P1025RDB)
@@ -108,6 +113,7 @@
 #define __SW_BOOT_SPI		0x08
 #define __SW_BOOT_SD		0x04
 #define __SW_BOOT_NAND		0x0c
+#define CONFIG_SYS_L2_SIZE	(256 << 10)
 #endif
 
 #if defined(CONFIG_P2020RDB)
@@ -122,6 +128,14 @@
 #define __SW_BOOT_SD		0x68 /* or 0x18 */
 #define __SW_BOOT_NAND		0xe8
 #define __SW_BOOT_PCIE		0xa8
+#define CONFIG_SYS_L2_SIZE	(512 << 10)
+#endif
+
+#if CONFIG_SYS_L2_SIZE >= (512 << 10)
+/* must be 32-bit */
+#define CONFIG_SYS_INIT_L2_ADDR	0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 #endif
 
 #ifdef CONFIG_SDCARD
@@ -140,16 +154,39 @@
 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
 #endif
 
-#if defined(CONFIG_NAND) && defined(CONFIG_NAND_FSL_ELBC)
-#define CONFIG_NAND_U_BOOT
-#define CONFIG_SYS_EXTRA_ENV_RELOC
-#define CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_TEXT_BASE_SPL	0xff800000
-#ifdef CONFIG_NAND_SPL
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE_SPL
+#ifdef CONFIG_NAND
+#define CONFIG_SPL
+#define CONFIG_SPL_INIT_MINIMAL
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_NAND_MINIMAL
+#define CONFIG_SPL_FLUSH_IMAGE
+#define CONFIG_SPL_TARGET		"u-boot-with-spl.bin"
+
+#define CONFIG_SPL_TEXT_BASE		0xfffff000
+#define CONFIG_SPL_MAX_SIZE		(4 * 1024)
+
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+/* We multiply CONFIG_SPL_MAX_SIZE by two to leave some room for BSS. */
+#define CONFIG_SYS_TEXT_BASE		0xf8f82000
+#define CONFIG_SPL_RELOC_TEXT_BASE	\
+	(CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
+#define CONFIG_SPL_RELOC_STACK		\
+	(CONFIG_SYS_INIT_L2_END - CONFIG_SPL_MAX_SIZE * 2)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START	\
+	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SPL_MAX_SIZE)
 #else
-#define CONFIG_SYS_TEXT_BASE		0x11001000
-#endif /* CONFIG_NAND_SPL */
+#define CONFIG_SYS_TEXT_BASE		0x00201000
+#define CONFIG_SPL_RELOC_TEXT_BASE	0x00100000
+#define CONFIG_SPL_RELOC_STACK		0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_DST	(0x00200000 - CONFIG_SPL_MAX_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_START	0x00200000
+#endif
+
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0
+#define CONFIG_SYS_LDSCRIPT		"arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 #endif
 
 #ifndef CONFIG_SYS_TEXT_BASE
@@ -161,8 +198,12 @@
 #endif
 
 #ifndef CONFIG_SYS_MONITOR_BASE
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SPL_TEXT_BASE
+#else
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor */
 #endif
+#endif
 
 /* High Level Configuration Options */
 #define CONFIG_BOOKE
@@ -221,7 +262,7 @@
 
 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
        SPL code*/
-#if defined(CONFIG_NAND_SPL)
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 #endif
 
@@ -248,39 +289,7 @@
 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 
 /* Default settings for DDR3 */
-#ifdef CONFIG_P2020RDB
-#define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
-#define CONFIG_SYS_DDR_CS0_CONFIG	0x80014202
-#define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
-#define CONFIG_SYS_DDR_CS1_BNDS		0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG	0x00000000
-#define CONFIG_SYS_DDR_CS1_CONFIG_2	0x00000000
-
-#define CONFIG_SYS_DDR_DATA_INIT	0xdeadbeef
-#define CONFIG_SYS_DDR_INIT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_INIT_EXT_ADDR	0x00000000
-#define CONFIG_SYS_DDR_MODE_CONTROL	0x00000000
-
-#define CONFIG_SYS_DDR_ZQ_CONTROL	0x89080600
-#define CONFIG_SYS_DDR_WRLVL_CONTROL	0x8645F607
-#define CONFIG_SYS_DDR_SR_CNTR		0x00000000
-#define CONFIG_SYS_DDR_RCW_1		0x00000000
-#define CONFIG_SYS_DDR_RCW_2		0x00000000
-#define CONFIG_SYS_DDR_CONTROL		0xC7000000	/* Type = DDR3	*/
-#define CONFIG_SYS_DDR_CONTROL_2	0x24401000
-#define CONFIG_SYS_DDR_TIMING_4		0x00220001
-#define CONFIG_SYS_DDR_TIMING_5		0x02401400
-
-#define CONFIG_SYS_DDR_TIMING_3		0x00020000
-#define CONFIG_SYS_DDR_TIMING_0		0x00330104
-#define CONFIG_SYS_DDR_TIMING_1		0x6f6B4644
-#define CONFIG_SYS_DDR_TIMING_2		0x0FA88CCF
-#define CONFIG_SYS_DDR_CLK_CTRL		0x02000000
-#define CONFIG_SYS_DDR_MODE_1		0x00421422
-#define CONFIG_SYS_DDR_MODE_2		0x04000000
-#define CONFIG_SYS_DDR_INTERVAL		0x0C300100
-
-#else
+#ifndef CONFIG_P2020RDB
 #define CONFIG_SYS_DDR_CS0_BNDS		0x0000003f
 #define CONFIG_SYS_DDR_CS0_CONFIG	0x80014302
 #define CONFIG_SYS_DDR_CS0_CONFIG_2	0x00000000
@@ -318,21 +327,18 @@
 /*
  * Memory map
  *
- * 0x0000_0000 0x7fff_ffff	DDR	Up to 2GB cacheable
+ * 0x0000_0000 0x7fff_ffff	DDR		Up to 2GB cacheable
  * 0x8000_0000 0xdfff_ffff	PCI Express Mem	1.5G non-cacheable(PCIe * 3)
+ * 0xec00_0000 0xefff_ffff	NOR flash	Up to 64M non-cacheable	CS0/1
+ * 0xf8f8_0000 0xf8ff_ffff	L2 SRAM		Up to 512K cacheable
+ *   (early boot only)
+ * 0xff80_0000 0xff80_7fff	NAND flash	32K non-cacheable	CS1/0
+ * 0xff98_0000 0xff98_ffff	PMC		64K non-cacheable	CS2
+ * 0xffa0_0000 0xffaf_ffff	CPLD		1M non-cacheable	CS3
+ * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable	CS2
  * 0xffc0_0000 0xffc3_ffff	PCI IO range	256k non-cacheable
- *
- * Localbus cacheable (TBD)
- * 0xXXXX_XXXX 0xXXXX_XXXX	SRAM	YZ M Cacheable
- *
- * Localbus non-cacheable
- * 0xec00_0000 0xefff_ffff	FLASH	Up to 64M non-cacheable
- * 0xff80_0000 0xff8f_ffff	NAND flash	1M non-cacheable
- * 0xff90_0000 0xff97_ffff	L2 SDRAM(REV.)  512K cacheable(optional)
- * 0xffa0_0000 0xffaf_ffff	CPLD	1M non-cacheable
- * 0xffb0_0000 0xffbf_ffff	VSC7385 switch  1M non-cacheable
- * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K Cacheable TLB0
- * 0xffe0_0000 0xffef_ffff	CCSR	1M non-cacheable
+ * 0xffd0_0000 0xffd0_3fff	L1 for stack	16K cacheable
+ * 0xffe0_0000 0xffef_ffff	CCSR		1M non-cacheable
  */
 
 
@@ -392,15 +398,6 @@
 #define CONFIG_CMD_NAND
 #define CONFIG_SYS_NAND_BLOCK_SIZE	(16 * 1024)
 
-/* NAND boot: 4K NAND loader config */
-#define CONFIG_SYS_NAND_SPL_SIZE	0x1000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) + CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_DST	(0x11000000 - CONFIG_SYS_NAND_SPL_SIZE)
-#define CONFIG_SYS_NAND_U_BOOT_START	0x11000000
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
-#define CONFIG_SYS_NAND_U_BOOT_RELOC	0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	(CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 	| (2<<BR_DECC_SHIFT)	/* Use HW ECC */ \
 	| BR_PS_8	/* Port Size = 8 bit */ \
@@ -461,7 +458,7 @@
 				 OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 				 OR_GPCM_EAD)
 
-#ifdef CONFIG_NAND_U_BOOT
+#ifdef CONFIG_NAND
 #define CONFIG_SYS_BR0_PRELIM	CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 #define CONFIG_SYS_OR0_PRELIM	CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 #define CONFIG_SYS_BR1_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
@@ -511,7 +508,7 @@
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)
-#ifdef CONFIG_NAND_SPL
+#ifdef CONFIG_SPL_BUILD
 #define CONFIG_NS16550_MIN_FUNCTIONS
 #endif
 
@@ -709,7 +706,6 @@
 /*
  * Environment
  */
-#ifdef CONFIG_SYS_RAMBOOT
 #ifdef CONFIG_RAMBOOT_SPIFLASH
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
@@ -724,16 +720,15 @@
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_SYS_MMC_ENV_DEV	0
-#elif defined(CONFIG_NAND_U_BOOT)
+#elif defined(CONFIG_NAND)
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
 #define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
 #define CONFIG_ENV_RANGE	(3 * CONFIG_ENV_SIZE)
-#else
+#elif defined(CONFIG_SYS_RAMBOOT)
 #define CONFIG_ENV_IS_NOWHERE	/* Store ENV in memory only */
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
 #define CONFIG_ENV_SIZE		0x2000
-#endif
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000