* Patch by Josef Wagner, 12 Mar 2003:

  - 16/32 MB and 50/80 MHz support with auto-detection for IP860
  - ETH05 and BEDBUG support for CU824
  - added support for MicroSys CPC45
  - new BOOTROM/FLASH0 and DOC base for PM826

* Patch by Robert Schwebel, 12 Mar 2003:
  Fix the chpart command on innokom board

* Name cleanup:
  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  s/PPCBoot/U-Boot/ in some files
  s/pImage/uImage/  in some files

* Patch by Detlev Zundel, 15 Jan 2003:
  Fix '' command line quoting

* Patch by The LEOX team, 19 Jan 2003:
  - add support for the ELPT860 board
  - add support for Dallas ds164x RTC

14 files changed, 869 insertions, 25 deletions

diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
new file mode 100644
index 0000000000..ed843d40a4
--- /dev/null
+++ b/include/configs/CPC45.h
@@ -0,0 +1,448 @@
+/*
+ * (C) Copyright 2001-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ *
+ * Configuration settings for the CPC45 board.
+ *
+ */
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC824X		1
+#define CONFIG_MPC8245		1
+#define CONFIG_CPC45		1
+
+
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_BAUDRATE		9600
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
+
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#define CONFIG_BOOTDELAY	5
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BEDBUG  | \
+				CFG_CMD_DHCP	| \
+				CFG_CMD_PCI	| \
+				0 /* CFG_CMD_DATE */	)
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
+ */
+#include <cmd_confdefs.h>
+
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+
+#if 1
+#define	CFG_HUSH_PARSER		1	/* use "hush" command parser	*/
+#endif
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
+/* Print Buffer Size
+ */
+#define CFG_PBSIZE	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
+
+#define	CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_LOAD_ADDR	0x00100000	/* Default load address		*/
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+
+#define CFG_SDRAM_BASE	    0x00000000
+
+#if defined(CONFIG_BOOT_ROM)
+#define CFG_FLASH_BASE	    0xFF000000
+#else
+#define CFG_FLASH_BASE	    0xFF800000
+#endif
+
+#define CFG_RESET_ADDRESS   0xFFF00100
+
+#define CFG_EUMB_ADDR	    0xFCE00000
+
+#define CFG_MONITOR_BASE    TEXT_BASE
+
+#define CFG_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
+#define CFG_MALLOC_LEN	    (128 << 10) /* Reserve 128 kB for malloc()	*/
+
+#define CFG_MEMTEST_START   0x00004000	/* memtest works on		*/
+#define CFG_MEMTEST_END	    0x02000000	/* 0 ... 32 MB in DRAM		*/
+
+	/* Maximum amount of RAM.
+	 */
+#define CFG_MAX_RAM_SIZE    0x10000000
+
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+#undef CFG_RAMBOOT
+#else
+#define CFG_RAMBOOT
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area
+ */
+
+	/* Size in bytes reserved for initial data
+	 */
+#define CFG_GBL_DATA_SIZE    128
+
+#define CFG_INIT_RAM_ADDR     0x40000000
+#define CFG_INIT_RAM_END      0x1000
+#define CFG_GBL_DATA_OFFSET  (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+
+/*
+ * NS16550 Configuration
+ */
+#define CFG_NS16550		
+#define CFG_NS16550_SERIAL
+
+#define CFG_NS16550_REG_SIZE	1
+
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_NS16550_COM1	(CFG_EUMB_ADDR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_EUMB_ADDR + 0x4600)
+#define	DUART_DCR		(CFG_EUMB_ADDR + 0x4511)
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ * For the detail description refer to the MPC8240 user's manual.
+ */
+
+#define CONFIG_SYS_CLK_FREQ  33000000
+#define CFG_HZ		     1000
+/*
+ * SDRAM Configuration Settings
+ * Please note: currently only 64 and 128 MB SDRAM size supported
+ * set CFG_SDRAM_SIZE to 64 or 128
+ * Memory configuration using SPD information stored on the SODIMMs
+ * not yet supported.
+ */
+ 
+#define	CFG_SDRAM_SIZE    64		/* SDRAM size -- 64 or 128 MB supported */
+
+	/* Bit-field values for MCCR1.
+	 */
+#define CFG_ROMNAL	    0
+#define CFG_ROMFAL	    7
+
+#if (CFG_SDRAM_SIZE == 64)			/* 64 MB */
+#define CFG_BANK0_ROW	0			/* SDRAM bank 7-0 row address */
+#elif (CFG_SDRAM_SIZE == 128)			/* 128 MB */
+#define CFG_BANK0_ROW	2			/* SDRAM bank 7-0 row address */
+#else
+#  error "SDRAM size not supported"
+#endif
+#define CFG_BANK1_ROW	0	
+#define CFG_BANK2_ROW	0
+#define CFG_BANK3_ROW	0
+#define CFG_BANK4_ROW	0
+#define CFG_BANK5_ROW	0
+#define CFG_BANK6_ROW	0
+#define CFG_BANK7_ROW	0
+
+	/* Bit-field values for MCCR2.
+	 */
+#define CFG_REFINT	    430	    /* Refresh interval			*/
+
+	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
+	 */
+#define CFG_BSTOPRE	    192
+
+	/* Bit-field values for MCCR3.
+	 */
+#define CFG_REFREC	    2	    /* Refresh to activate interval	*/
+#define CFG_RDLAT	    3	    /* Data latancy from read command	*/
+
+	/* Bit-field values for MCCR4.
+	 */
+#define CFG_PRETOACT	    2	    /* Precharge to activate interval	*/
+#define CFG_ACTTOPRE	    5	    /* Activate to Precharge interval	*/
+#define CFG_SDMODE_CAS_LAT  2	    /* SDMODE CAS latancy		*/
+#define CFG_SDMODE_WRAP	    0	    /* SDMODE wrap type			*/
+#define CFG_SDMODE_BURSTLEN 2	    /* SDMODE Burst length		*/
+#define CFG_ACTORW	    2
+#define CFG_REGISTERD_TYPE_BUFFER 1
+#define CFG_EXTROM	    1
+#define CFG_REGDIMM	    0
+
+/* Memory bank settings.
+ * Only bits 20-29 are actually used from these vales to set the
+ * start/end addresses. The upper two bits will always be 0, and the lower
+ * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
+ * address. Refer to the MPC8240 book.
+ */
+
+#define CFG_BANK0_START	    0x00000000
+#define CFG_BANK0_END	    (CFG_MAX_RAM_SIZE - 1)
+#define CFG_BANK0_ENABLE    1
+#define CFG_BANK1_START	    0x3ff00000
+#define CFG_BANK1_END	    0x3fffffff
+#define CFG_BANK1_ENABLE    0
+#define CFG_BANK2_START	    0x3ff00000
+#define CFG_BANK2_END	    0x3fffffff
+#define CFG_BANK2_ENABLE    0
+#define CFG_BANK3_START	    0x3ff00000
+#define CFG_BANK3_END	    0x3fffffff
+#define CFG_BANK3_ENABLE    0
+#define CFG_BANK4_START	    0x3ff00000
+#define CFG_BANK4_END	    0x3fffffff
+#define CFG_BANK4_ENABLE    0
+#define CFG_BANK5_START	    0x3ff00000
+#define CFG_BANK5_END	    0x3fffffff
+#define CFG_BANK5_ENABLE    0
+#define CFG_BANK6_START	    0x3ff00000
+#define CFG_BANK6_END	    0x3fffffff
+#define CFG_BANK6_ENABLE    0
+#define CFG_BANK7_START	    0x3ff00000
+#define CFG_BANK7_END	    0x3fffffff
+#define CFG_BANK7_ENABLE    0
+
+#define CFG_ODCR	    0xff
+
+#define CFG_IBAT0L  (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U  (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT1L  (CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U  (CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+#define CFG_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT3L  (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
+#define CFG_IBAT3U  (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L  CFG_IBAT0L
+#define CFG_DBAT0U  CFG_IBAT0U
+#define CFG_DBAT1L  CFG_IBAT1L
+#define CFG_DBAT1U  CFG_IBAT1U
+#define CFG_DBAT2L  CFG_IBAT2L
+#define CFG_DBAT2U  CFG_IBAT2U
+#define CFG_DBAT3L  CFG_IBAT3L
+#define CFG_DBAT3U  CFG_IBAT3U
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* Max number of flash banks		*/
+#define CFG_MAX_FLASH_SECT	39	/* Max number of sectors in one bank	*/
+#define INTEL_ID_28F160F3T	0x88F388F3	/*  16M = 1M x 16 top boot sector	*/
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+	/* Warining: environment is not EMBEDDED in the ppcboot code.
+	 * It's stored in flash separately.
+	 */
+#define CFG_ENV_IS_IN_FLASH	    1
+
+#define CFG_ENV_ADDR		(CFG_FLASH_BASE + 0x7C0000)
+#define CFG_ENV_SIZE		0x4000	/* Size of the Environment		*/
+#define CFG_ENV_OFFSET		0	/* starting right at the beginning	*/
+#define CFG_ENV_SECT_SIZE	0x8000 /* Size of the Environment Sector	*/
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM		0x02	/* Software reboot			*/
+
+
+#define	SRAM_BASE		0x80000000	/* SRAM base address 	*/
+#define	SRAM_END		0x801FFFFF
+
+/*---------------------------------------------------------------------*/
+/* CPC45 Memory Map                                                    */
+/*---------------------------------------------------------------------*/
+#define	SRAM_BASE	0x80000000	/* SRAM base address            */
+#define	ST16552_A_BASE	0x80200000	/* ST16552 channel A		*/
+#define	ST16552_B_BASE	0x80400000	/* ST16552 channel A		*/
+#define	BCSR_BASE	0x80600000	/* board control / status registers */
+#define	DISPLAY_BASE	0x80600040	/* DISPLAY base			*/
+#define	PCMCIA_MEM_BASE	0x81000000	/* PCMCIA memory window base        */
+#define	PCMCIA_IO_BASE	0xFE000000	/* PCMCIA IO window base            */
+
+
+/*---------------------------------------------------------------------*/
+/* CPC45 Control/Status Registers                                      */
+/*---------------------------------------------------------------------*/
+#define	IRQ_ENA_1		*((volatile uchar*)(BCSR_BASE + 0x00))
+#define	IRQ_STAT_1		*((volatile uchar*)(BCSR_BASE + 0x01))
+#define	IRQ_ENA_2		*((volatile uchar*)(BCSR_BASE + 0x02))
+#define	IRQ_STAT_2		*((volatile uchar*)(BCSR_BASE + 0x03))
+#define	BOARD_CTRL		*((volatile uchar*)(BCSR_BASE + 0x04))
+#define	BOARD_STAT		*((volatile uchar*)(BCSR_BASE + 0x05))
+#define	WDG_START		*((volatile uchar*)(BCSR_BASE + 0x06))
+#define	WDG_PRESTOP		*((volatile uchar*)(BCSR_BASE + 0x06))
+#define	WDG_STOP		*((volatile uchar*)(BCSR_BASE + 0x06))
+#define	BOARD_REV		*((volatile uchar*)(BCSR_BASE + 0x07))
+
+/* IRQ_ENA_1 bit definitions */
+#define	I_ENA_1_IERA	0x80		/* INTA enable 			*/
+#define	I_ENA_1_IERB	0x40		/* INTB enable			*/
+#define	I_ENA_1_IERC	0x20		/* INTC enable			*/
+#define	I_ENA_1_IERD	0x10		/* INTD enable			*/
+
+/* IRQ_STAT_1 bit definitions */
+#define	I_STAT_1_INTA	0x80		/* INTA status			*/
+#define	I_STAT_1_INTB	0x40		/* INTB status			*/
+#define	I_STAT_1_INTC	0x20		/* INTC status			*/
+#define	I_STAT_1_INTD	0x10		/* INTD status			*/
+
+/* IRQ_ENA_2 bit definitions */
+#define	I_ENA_2_IEAB	0x80		/* ABORT IRQ enable		*/
+#define	I_ENA_2_IEK1	0x40		/* KEY1 IRQ enable		*/
+#define	I_ENA_2_IEK2	0x20		/* KEY2 IRQ enable		*/ 
+#define	I_ENA_2_IERT	0x10		/* RTC IRQ enable		*/
+#define	I_ENA_2_IESM	0x08		/* LM81 IRQ enable		*/
+#define	I_ENA_2_IEDG	0x04		/* DEGENERATING IRQ enable	*/
+#define	I_ENA_2_IES2	0x02		/* ST16552/B IRQ enable		*/
+#define	I_ENA_2_IES1	0x01		/* ST16552/A IRQ enable		*/
+
+/* IRQ_STAT_2 bit definitions */
+#define	I_STAT_2_ABO	0x80		/* ABORT IRQ status		*/
+#define	I_STAT_2_KY1	0x40		/* KEY1 IRQ status		*/
+#define	I_STAT_2_KY2	0x20		/* KEY2 IRQ status		*/ 
+#define	I_STAT_2_RTC	0x10		/* RTC IRQ status		*/
+#define	I_STAT_2_SMN	0x08		/* LM81 IRQ status		*/ 
+#define	I_STAT_2_DEG	0x04		/* DEGENERATING IRQ status	*/
+#define	I_STAT_2_SIO2	0x02		/* ST16552/B IRQ status		*/
+#define	I_STAT_2_SIO1	0x01		/* ST16552/A IRQ status		*/
+
+/* BOARD_CTRL bit definitions */
+#define	USER_LEDS		2			/* 2 user LEDs	*/
+
+#if (USER_LEDS == 4)
+#define	B_CTRL_WRSE		0x80
+#define	B_CTRL_KRSE		0x40
+#define	B_CTRL_FWRE		0x20		/* Flash write enable		*/
+#define	B_CTRL_FWPT		0x10		/* Flash write protect		*/
+#define	B_CTRL_LED3		0x08		/* LED 3 control		*/
+#define	B_CTRL_LED2		0x04		/* LED 2 control		*/
+#define	B_CTRL_LED1		0x02		/* LED 1 control		*/
+#define	B_CTRL_LED0		0x01		/* LED 0 control		*/
+#else
+#define	B_CTRL_WRSE		0x80
+#define	B_CTRL_KRSE		0x40
+#define	B_CTRL_FWRE_1		0x20		/* Flash write enable		*/
+#define	B_CTRL_FWPT_1		0x10		/* Flash write protect		*/
+#define	B_CTRL_LED1		0x08		/* LED 1 control		*/
+#define	B_CTRL_LED0		0x04		/* LED 0 control		*/
+#define	B_CTRL_FWRE_0		0x02		/* Flash write enable		*/
+#define	B_CTRL_FWPT_0		0x01		/* Flash write protect		*/
+#endif
+
+/* BOARD_STAT bit definitions */
+#define	B_STAT_WDGE		0x80
+#define	B_STAT_WDGS		0x40
+#define	B_STAT_WRST		0x20
+#define	B_STAT_KRST		0x10
+#define	B_STAT_CSW3		0x08		/* sitch bit 3 status		*/
+#define	B_STAT_CSW2		0x04		/* sitch bit 2 status		*/
+#define	B_STAT_CSW1		0x02		/* sitch bit 1 status		*/
+#define	B_STAT_CSW0		0x01		/* sitch bit 0 status		*/
+
+/*---------------------------------------------------------------------*/
+/* Display addresses                                                   */
+/*---------------------------------------------------------------------*/
+#define	DISP_UDC_RAM	(DISPLAY_BASE + 0x08)	/* UDC RAM	       */
+#define	DISP_CHR_RAM	(DISPLAY_BASE + 0x18)	/* character Ram       */
+#define	DISP_FLASH	(DISPLAY_BASE + 0x20)	/* Flash Ram           */
+
+#define	DISP_UDC_ADR	*((volatile uchar*)(DISPLAY_BASE + 0x00))	/* UDC Address Reg.    */
+#define	DISP_CWORD	*((volatile uchar*)(DISPLAY_BASE + 0x10))	/* Control Word Reg.   */
+
+#define	DISP_DIG0	*((volatile uchar*)(DISP_CHR_RAM + 0x00))	/* Digit 0 address     */      
+#define	DISP_DIG1	*((volatile uchar*)(DISP_CHR_RAM + 0x01))	/* Digit 0 address     */      
+#define	DISP_DIG2	*((volatile uchar*)(DISP_CHR_RAM + 0x02))	/* Digit 0 address     */
+#define	DISP_DIG3	*((volatile uchar*)(DISP_CHR_RAM + 0x03))	/* Digit 0 address     */      
+#define	DISP_DIG4	*((volatile uchar*)(DISP_CHR_RAM + 0x04))	/* Digit 0 address     */      
+#define	DISP_DIG5	*((volatile uchar*)(DISP_CHR_RAM + 0x05))	/* Digit 0 address     */
+#define	DISP_DIG6	*((volatile uchar*)(DISP_CHR_RAM + 0x06))	/* Digit 0 address     */      
+#define	DISP_DIG7	*((volatile uchar*)(DISP_CHR_RAM + 0x07))	/* Digit 0 address     */      
+
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_PCI			/* include pci support			*/
+#undef CONFIG_PCI_PNP
+
+#define CONFIG_NET_MULTI		/* Multi ethernet cards support 	*/
+
+#define CONFIG_EEPRO100
+
+#define PCI_ENET0_IOADDR	0x00104000
+#define PCI_ENET0_MEMADDR	0x82000000
+#define	PCI_PLX9030_MEMADDR	0x82100000
+#endif	/* __CONFIG_H */
diff --git a/include/configs/CPU86.h b/include/configs/CPU86.h
index ae8525f9b9..9712d479c1 100644
--- a/include/configs/CPU86.h
+++ b/include/configs/CPU86.h
@@ -171,7 +171,7 @@
 				 CFG_CMD_EEPROM | \
 				 CFG_CMD_DATE	| \
 				 CFG_CMD_I2C	| \
-				 CFG_CMD_DOC)
+				 CFG_CMD_DOC	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -329,8 +329,8 @@
 #define CFG_I2C_EEPROM_ADDR_OVERFLOW	0x07
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+#define CFG_ENV_OFFSET		512
+#define CFG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*
diff --git a/include/configs/CU824.h b/include/configs/CU824.h
index ed38ef6446..40ba25a62c 100644
--- a/include/configs/CU824.h
+++ b/include/configs/CU824.h
@@ -60,9 +60,10 @@
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
 
 #define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
+				CFG_CMD_BEDBUG  | \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_PCI	| \
-				0/* CFG_CMD_DATE */	)
+				0 /* CFG_CMD_DATE */	)
 
 /* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
  */
@@ -302,4 +303,7 @@
 #define CFG_ETH_DEV_FN	     0x7800
 #define CFG_ETH_IOBASE	     0x00104000
 
+#define CONFIG_EEPRO100
+#define PCI_ENET0_IOADDR	0x00104000
+#define PCI_ENET0_MEMADDR	0x80000000
 #endif	/* __CONFIG_H */
diff --git a/include/configs/ELPT860.h b/include/configs/ELPT860.h
new file mode 100644
index 0000000000..e9561b9eb4
--- /dev/null
+++ b/include/configs/ELPT860.h
@@ -0,0 +1,390 @@
+/*
+**=====================================================================
+**
+** Copyright (C) 2000, 2001, 2002, 2003
+** The LEOX team <team@leox.org>, http://www.leox.org
+**
+** LEOX.org is about the development of free hardware and software resources
+**   for system on chip.
+**
+** Description: U-Boot port on the LEOX's ELPT860 CPU board
+** ~~~~~~~~~~~
+**
+**=====================================================================
+**
+** This program is free software; you can redistribute it and/or
+** modify it under the terms of the GNU General Public License as
+** published by the Free Software Foundation; either version 2 of
+** the License, or (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+** MA 02111-1307 USA
+**
+**=====================================================================
+*/
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC860		1	/* It's a MPC860, in fact a 860T CPU */
+#define CONFIG_MPC860T		1
+#define CONFIG_ELPT860		1	/* ...on a LEOX's ELPT860 CPU board */
+
+#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		    */
+#undef	  CONFIG_8xx_CONS_SMC2
+#undef	  CONFIG_8xx_CONS_NONE
+
+#define CONFIG_CLOCKS_IN_MHZ    1  /* Clock passed to Linux (<2.4.5) in MHz */
+#define CONFIG_8xx_GCLK_FREQ    50000000       /* MPC860T runs at 50MHz */
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+
+#define CONFIG_BOARD_PRE_INIT   1       /* Call board_pre_init          */
+
+/* BOOT arguments */
+#define CONFIG_PREBOOT                                                     \
+     "echo;"	                                                           \
+     "echo Type \"run nfsboot\" to mount root filesystem over NFS;"        \
+     "echo"
+
+#undef	  CONFIG_BOOTARGS	
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+    "ramargs=setenv bootargs root=/dev/ram rw\0"			\
+    "rootargs=setenv rootpath /tftp/$(ipaddr)\0"			\
+    "nfsargs=setenv bootargs root=/dev/nfs rw "				\
+        "nfsroot=$(serverip):$(rootpath)\0"				\
+    "addip=setenv bootargs $(bootargs) "				\
+        "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"		\
+        ":$(hostname):eth0:off panic=1\0"				\
+    "ramboot=tftp 400000 /home/paugaml/pMulti;"				\
+        "run ramargs;bootm\0"						\
+    "nfsboot=tftp 400000 /home/paugaml/uImage;"				\
+        "run rootargs;run nfsargs;run addip;bootm\0"			\
+    ""
+#define CONFIG_BOOTCOMMAND	"run ramboot"
+
+#define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#undef	  CONFIG_WATCHDOG		/* watchdog disabled		*/
+#undef	  CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
+#undef	  CONFIG_RTC_MPC8xx		/* internal RTC MPC8xx unused	*/
+#define CONFIG_RTC_DS164x       1       /* RTC is a Dallas DS1646       */
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
+#undef	  CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
+
+#define CONFIG_COMMANDS	        ( CONFIG_CMD_DFL | \
+                                  CFG_CMD_ASKENV | \
+                                  CFG_CMD_DATE   )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define	CFG_LONGHELP			/* undef to save memory		*/
+#define	CFG_PROMPT     "LEOX_elpt860: "	/* Monitor Command Prompt	*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#  define CFG_CBSIZE	 256		/* Console I/O Buffer Size	*/
+#endif
+
+#define	CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define	CFG_MAXARGS	  16		/* max number of command args	*/
+#define CFG_BARGSIZE	  CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x00400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x00C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define	CFG_LOAD_ADDR		0x00100000	/* default load address	*/
+
+#define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
+
+/*
+ * Environment Variables and Storages
+ */
+#define CONFIG_ENV_OVERWRITE    1  /* Allow Overwrite of serial# & ethaddr */
+
+#undef    CFG_ENV_IS_IN_NVRAM          /* Environment is in NVRAM       */
+#undef    CFG_ENV_IS_IN_EEPROM         /* Environment is in I2C EEPROM  */
+#define CFG_ENV_IS_IN_FLASH     1      /* Environment is in FLASH       */
+
+#define CONFIG_BAUDRATE		9600   /* console baudrate = 9600 bps   */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_ETHADDR          00:01:77:00:60:40
+#define CONFIG_IPADDR           192.168.0.30
+#define CONFIG_NETMASK          255.255.255.0
+
+#define CONFIG_SERVERIP         192.168.0.1
+#define CONFIG_GATEWAYIP        192.168.0.1
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR		0xFF000000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR	CFG_IMMR
+#define	CFG_INIT_RAM_END	0x2F00	/* End of used area in DPRAM	*/
+#define	CFG_GBL_DATA_SIZE	64  /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define	CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define	CFG_SDRAM_BASE		0x00000000
+#define CFG_FLASH_BASE		0x02000000
+#define CFG_NVRAM_BASE          0x03000000
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+#  if defined(DEBUG)
+#    define CFG_MONITOR_LEN	(320 << 10)  /* Reserve 320 kB for Monitor  */
+#  else
+#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#  endif
+#else
+#  if defined(DEBUG)
+#    define CFG_MONITOR_LEN	(256 << 10)  /* Reserve 256 kB for Monitor  */
+#  else
+#    define CFG_MONITOR_LEN	(192 << 10)  /* Reserve 192 kB for Monitor  */
+#  endif
+#endif
+
+#define CFG_MONITOR_BASE	CFG_FLASH_BASE
+#define	CFG_MALLOC_LEN		(128 << 10)  /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define	CFG_BOOTMAPSZ		(8 << 20)    /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks        */
+#define CFG_MAX_FLASH_SECT	8	/* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)   */
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)   */
+
+#if defined(CFG_ENV_IS_IN_FLASH)
+#  define CFG_ENV_OFFSET        0x10000	/* Offset   of Environment Sector    */
+#  define CFG_ENV_SIZE          0x10000 /* Total Size of Environment Sector  */
+#endif
+
+/*-----------------------------------------------------------------------
+ * NVRAM organization
+ */
+#define CFG_NVRAM_BASE_ADDR     CFG_NVRAM_BASE /* Base address of NVRAM area */
+#define CFG_NVRAM_SIZE          ((128*1024)-8) /* clock regs resident in the */
+                                               /*   8 top NVRAM locations    */
+
+#if defined(CFG_ENV_IS_IN_NVRAM)
+#  define CFG_ENV_ADDR          CFG_NVRAM_BASE /* Base address of NVRAM area */
+#  define CFG_ENV_SIZE          0x4000	/* Total Size of Environment Sector  */
+#endif
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE	16	/* For all MPC8xx CPUs               */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	 4      /* log base 2 of the above value     */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control				11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT  | SYPCR_BME | SYPCR_SWF | \
+                         SYPCR_SWE  | SYPCR_SWRI | SYPCR_SWP)
+#else
+#  define CFG_SYPCR	(SYPCR_SWTC | SYPCR_BMT  | SYPCR_BME | SYPCR_SWF | \
+                                                   SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SUMCR - SIU Module Configuration				11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#define CFG_SIUMCR	(SIUMCR_DBGC11)
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control				11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register		11-27
+ *-----------------------------------------------------------------------
+ * Once-per-Second Interrupt, Alarm Interrupt, RTC freezing enabled, RTC
+ *  enabled
+ */
+#define CFG_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control		11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR	(PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit - leave PLL multiplication factor unchanged !
+ */
+#define CFG_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register		15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK	 SCCR_EBDF11
+#define CFG_SCCR	(SCCR_TBS     | \
+			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
+			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
+			 SCCR_DFALCD00)
+
+/*-----------------------------------------------------------------------
+ * Chip Selects + SDRAM timings + Memory Periodic Timer Prescaler
+ *-----------------------------------------------------------------------
+ *
+ */
+#ifdef DEBUG
+#  define CFG_DER		0xFFE7400F	/* Debug Enable Register */
+#else
+#  define CFG_DER		0
+#endif
+
+/*
+ * Init Memory Controller:
+ * ~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * BR0 and OR0 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0          */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_PRELIM_OR_AM	0xFF000000	/* 16 MB between each CSx */
+
+/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 0, SCY = 8, EHTR = 0	  */
+#define CFG_OR_TIMING_FLASH	(OR_ACS_DIV2 | OR_BI | OR_SCY_8_CLK)
+
+#define CFG_OR0_PRELIM	(CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * BR1 and OR1 (SDRAM)
+ *
+ */
+#define SDRAM_BASE1_PRELIM	CFG_SDRAM_BASE	/* SDRAM bank #0        */
+#define	SDRAM_MAX_SIZE		0x02000000	/* 32 MB MAX for CS1    */
+
+/* SDRAM timing:                                                        */
+#define CFG_OR_TIMING_SDRAM	0x00000000
+
+#define CFG_OR1_PRELIM	((2 * CFG_PRELIM_OR_AM) | CFG_OR_TIMING_SDRAM )
+#define CFG_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+/*
+ * BR2 and OR2 (NVRAM)
+ *
+ */
+#define NVRAM_BASE1_PRELIM	CFG_NVRAM_BASE	/* NVRAM bank #0        */
+#define	NVRAM_MAX_SIZE		0x00020000	/* 128 KB MAX for CS2   */
+
+#define CFG_OR2_PRELIM	        0xFFF80160
+#define CFG_BR2_PRELIM	((NVRAM_BASE1_PRELIM & BR_BA_MSK) | BR_PS_8 | BR_V )
+
+/*
+ * Memory Periodic Timer Prescaler
+ */
+
+/* periodic timer for refresh */
+#define CFG_MAMR_PTA	        97     /* start with divider for 100 MHz */
+
+/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
+#define CFG_MPTPR_2BK_4K	MPTPR_PTP_DIV16	  /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K	MPTPR_PTP_DIV32	  /* setting for 1 bank  */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit  */
+#define CFG_MPTPR_2BK_8K	MPTPR_PTP_DIV8    /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K	MPTPR_PTP_DIV16   /* setting for 1 bank  */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL	((CFG_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    | \
+			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
+
+/*-----------------------------------------------------------------------
+ * Internal Definitions
+ *-----------------------------------------------------------------------
+ *
+ */
+
+/*
+ * Boot Flags
+ */
+#define	BOOTFLAG_COLD	0x01             /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02             /* Software reboot                  */
+
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/IP860.h b/include/configs/IP860.h
index 6fa2d19c2f..d7dce71e31 100644
--- a/include/configs/IP860.h
+++ b/include/configs/IP860.h
@@ -35,6 +35,7 @@
 
 #define CONFIG_MPC860		1	/* This is a MPC860 CPU		*/
 #define CONFIG_IP860		1	/* ...on a IP860 board		*/
+#define CONFIG_BOARD_PRE_INIT	1	    /* Call board_pre_init	*/
 
 #define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
 #define CONFIG_BAUDRATE		9600
@@ -45,10 +46,6 @@
 #define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo" \
 "\0load=tftp \"/tftpboot/u-boot.bin\"\0update=protect off 1:0;era 1:0;cp.b 100000 10000000 $(filesize)\0"
 
-#define CONFIG_ETHADDR	00:30:bf:01:02:d2
-#define CONFIG_IPADDR	10.0.0.5
-#define CONFIG_SERVERIP	10.0.0.2
-
 #undef	CONFIG_BOOTARGS
 #define CONFIG_BOOTCOMMAND							\
 	"bootp; "								\
@@ -230,10 +227,13 @@
 			 SIUMCR_DBGC11 | SIUMCR_MLRC10)
 
 /*-----------------------------------------------------------------------
- * Clock Setting - the IP860 has no 32kHz clock, so automatic detection fails
+ * Clock Setting - get clock frequency from Board Revision Register 
  *-----------------------------------------------------------------------
  */
-#define	CONFIG_8xx_GCLK_FREQ	50000000
+#ifndef __ASSEMBLY__
+extern  unsigned long           ip860_get_clk_freq (void);
+#endif
+#define	CONFIG_8xx_GCLK_FREQ	ip860_get_clk_freq()
 
 /*-----------------------------------------------------------------------
  * TBSCR - Time Base Status and Control				11-26
@@ -430,6 +430,8 @@ typedef	struct ip860_bcsr_s {
 	unsigned char	wd_trigger;	/* +1A Watchdog trigger register	*/
 	unsigned char	reservedD;
 	unsigned char	rmw_req;	/* +1C RMW request register		*/
+	unsigned char	reservedE;
+	unsigned char	bd_rev;		/* +1E Board Revision register		*/
 } ip860_bcsr_t;
 #endif	/* __ASSEMBLY__ */
 
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index b56da695e8..d95596cadf 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -158,9 +158,9 @@
 #define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
 				 CFG_CMD_BEDBUG	| \
 				 CFG_CMD_DATE	| \
+				 CFG_CMD_DOC	| \
 				 CFG_CMD_EEPROM | \
-				 CFG_CMD_I2C	| \
-				 CFG_CMD_DOC)
+				 CFG_CMD_I2C	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -211,11 +211,11 @@
  * Flash and Boot ROM mapping
  */
 
-#define	CFG_BOOTROM_BASE	0x60000000
+#define	CFG_BOOTROM_BASE	0xFF800000
 #define	CFG_BOOTROM_SIZE	0x00080000
-#define	CFG_FLASH0_BASE		0x40000000
+#define	CFG_FLASH0_BASE		0xFF000000
 #define	CFG_FLASH0_SIZE		0x02000000
-#define CFG_DOC_BASE		0x60000000
+#define CFG_DOC_BASE		0xFF800000
 #define CFG_DOC_SIZE		0x00100000
 
 
@@ -245,8 +245,8 @@
 #define CFG_I2C_EEPROM_ADDR_LEN	1
 #define CFG_EEPROM_PAGE_WRITE_BITS	4
 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-#define CFG_ENV_OFFSET		0
-#define CFG_ENV_SIZE		2048
+#define CFG_ENV_OFFSET		512
+#define CFG_ENV_SIZE		(2048 - 512)
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index 0750116246..6c37208c05 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -70,7 +70,7 @@
 			"root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
 			"ip=$(ipaddr):$(serverip)::$(netmask):pn62:eth0:off;" \
 			"loadp 100000; bootm"
-			/* "tftpboot 100000 pImage; bootm" */
+			/* "tftpboot 100000 uImage; bootm" */
 #else
 /* Boot Linux with RAMdisk based filesystem (initrd, BusyBox) */
 #define CONFIG_BOOTCOMMAND \
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index ad36c95603..acfe747cec 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -75,7 +75,7 @@
 		"setenv filesize;saveenv\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
-	"kernel_img=/tftpboot/pImage\0"					\
+	"kernel_img=/tftpboot/uImage\0"					\
 	"kernel_load=tftp 200000 $(kernel_img)\0"			\
 	"net_nfs=run kernel_load nfsargs addip addtty;bootm\0"		\
 	"flash_nfs=run nfsargs addip addtty;bootm $(kernel_addr)\0"	\
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index bbd5939f2f..9ad1839154 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -74,7 +74,7 @@
 #define CONFIG_IPADDR		10.0.0.98
 #define CONFIG_SERVERIP		10.0.0.1
 #undef	CONFIG_BOOTCOMMAND
-#define CONFIG_BOOTCOMMAND	"tftp 200000 pImage;bootm 200000"
+#define CONFIG_BOOTCOMMAND	"tftp 200000 uImage;bootm 200000"
 /*----------------------------------------------------------------------*/
 
 /*
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 6836326828..cc51ce6674 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -71,7 +71,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 71e08ce817..60aacfb762 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -67,7 +67,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index ac0e28a15e..37363a25ff 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -67,7 +67,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 5564b2310e..0d0b8c3162 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -67,7 +67,7 @@
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
 	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
-	"bootfile=/tftpboot/TQM860L/pImage\0"				\
+	"bootfile=/tftpboot/TQM860L/uImage\0"				\
 	"kernel_addr=40040000\0"					\
 	"ramdisk_addr=40100000\0"					\
 	""
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index 66c79356f4..fa466007c9 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -97,7 +97,7 @@
 		"bootm $(kernel_addr)\0"					\
 	"flash_self=run ramargs addip add_wdt addfb add_misc;"	\
 		"bootm $(kernel_addr) $(ramdisk_addr)\0"			\
-	"net_nfs=tftp 100000 /tftpboot/pImage.lwmon;"		\
+	"net_nfs=tftp 100000 /tftpboot/uImage.lwmon;"		\
 		"run nfsargs addip add_wdt addfb;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"						\
 	"load=tftp 100000 /tftpboot/u-boot.bin\0"				\