Merge git://git.denx.de/u-boot-sunxi

4 files changed, 221 insertions, 7 deletions

diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index a4c3fb69e4..6ac42acaea 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -21,6 +21,8 @@
 	#define CONFIG_SUNXI_USB_PHYS	4
 #elif defined CONFIG_MACH_SUN8I_A83T
 	#define CONFIG_SUNXI_USB_PHYS	3
+#elif defined CONFIG_MACH_SUN8I_V3S
+	#define CONFIG_SUNXI_USB_PHYS	1
 #else
 	#define CONFIG_SUNXI_USB_PHYS	2
 #endif
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 1d475b10dd..64a190059a 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -69,7 +69,12 @@
 #define SDRAM_OFFSET(x) 0x4##x
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define CONFIG_SYS_LOAD_ADDR		0x42000000 /* default load address */
+/* V3s do not have enough memory to place code at 0x4a000000 */
+#ifndef CONFIG_MACH_SUN8I_V3S
 #define CONFIG_SYS_TEXT_BASE		0x4a000000
+#else
+#define CONFIG_SYS_TEXT_BASE		0x42e00000
+#endif
 /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here 
  * since it needs to fit in with the other values. By also #defining it
  * we get warnings if the Kconfig value mismatches. */
@@ -146,8 +151,13 @@
 #define CONFIG_ENV_SIZE			(128 << 10)
 #endif
 
+#ifndef CONFIG_MACH_SUN8I_V3S
 /* 64MB of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (64 << 20))
+#else
+/* 2MB of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (2 << 20))
+#endif
 
 /*
  * Miscellaneous configurable options
@@ -231,10 +241,6 @@ extern int soft_i2c_gpio_scl;
     defined CONFIG_SY8106A_POWER
 #endif
 
-#ifndef CONFIG_CONS_INDEX
-#define CONFIG_CONS_INDEX              1       /* UART0 */
-#endif
-
 #ifdef CONFIG_REQUIRE_SERIAL_CONSOLE
 #if CONFIG_CONS_INDEX == 1
 #ifdef CONFIG_MACH_SUN9I
@@ -344,6 +350,7 @@ extern int soft_i2c_gpio_scl;
  * Scripts, PXE and DTBs should go afterwards, leaving the rest for the initrd.
  * Align the initrd to a 2MB page.
  */
+#define BOOTM_SIZE	__stringify(0xa000000)
 #define KERNEL_ADDR_R	__stringify(SDRAM_OFFSET(0080000))
 #define FDT_ADDR_R	__stringify(SDRAM_OFFSET(FA00000))
 #define SCRIPT_ADDR_R	__stringify(SDRAM_OFFSET(FC00000))
@@ -356,16 +363,30 @@ extern int soft_i2c_gpio_scl;
  * 32M uncompressed kernel, 16M compressed kernel, 1M fdt,
  * 1M script, 1M pxe and the ramdisk at the end.
  */
-
+#ifndef CONFIG_MACH_SUN8I_V3S
+#define BOOTM_SIZE     __stringify(0xa000000)
 #define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(2000000))
 #define FDT_ADDR_R     __stringify(SDRAM_OFFSET(3000000))
 #define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(3100000))
 #define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(3200000))
 #define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(3300000))
+#else
+/*
+ * 64M RAM minus 2MB heap + 16MB for u-boot, stack, fb, etc.
+ * 16M uncompressed kernel, 8M compressed kernel, 1M fdt,
+ * 1M script, 1M pxe and the ramdisk at the end.
+ */
+#define BOOTM_SIZE     __stringify(0x2e00000)
+#define KERNEL_ADDR_R  __stringify(SDRAM_OFFSET(1000000))
+#define FDT_ADDR_R     __stringify(SDRAM_OFFSET(1800000))
+#define SCRIPT_ADDR_R  __stringify(SDRAM_OFFSET(1900000))
+#define PXEFILE_ADDR_R __stringify(SDRAM_OFFSET(1A00000))
+#define RAMDISK_ADDR_R __stringify(SDRAM_OFFSET(1B00000))
+#endif
 #endif
 
 #define MEM_LAYOUT_ENV_SETTINGS \
-	"bootm_size=0xa000000\0" \
+	"bootm_size=" BOOTM_SIZE "\0" \
 	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
 	"fdt_addr_r=" FDT_ADDR_R "\0" \
 	"scriptaddr=" SCRIPT_ADDR_R "\0" \
@@ -476,11 +497,17 @@ extern int soft_i2c_gpio_scl;
 	CONSOLE_STDIN_SETTINGS \
 	CONSOLE_STDOUT_SETTINGS
 
+#ifdef CONFIG_ARM64
+#define FDTFILE "allwinner/" CONFIG_DEFAULT_DEVICE_TREE ".dtb"
+#else
+#define FDTFILE CONFIG_DEFAULT_DEVICE_TREE ".dtb"
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	CONSOLE_ENV_SETTINGS \
 	MEM_LAYOUT_ENV_SETTINGS \
 	DFU_ALT_INFO_RAM \
-	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"fdtfile=" FDTFILE "\0" \
 	"console=ttyS0,115200\0" \
 	SUNXI_MTDIDS_DEFAULT \
 	SUNXI_MTDPARTS_DEFAULT \
diff --git a/include/dt-bindings/clock/sun8i-v3s-ccu.h b/include/dt-bindings/clock/sun8i-v3s-ccu.h
new file mode 100644
index 0000000000..c0d5d5599c
--- /dev/null
+++ b/include/dt-bindings/clock/sun8i-v3s-ccu.h
@@ -0,0 +1,107 @@
+/*
+ * Copyright (c) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-h3-ccu.h, which is:
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN8I_V3S_H_
+#define _DT_BINDINGS_CLK_SUN8I_V3S_H_
+
+#define CLK_CPU			14
+
+#define CLK_BUS_CE		20
+#define CLK_BUS_DMA		21
+#define CLK_BUS_MMC0		22
+#define CLK_BUS_MMC1		23
+#define CLK_BUS_MMC2		24
+#define CLK_BUS_DRAM		25
+#define CLK_BUS_EMAC		26
+#define CLK_BUS_HSTIMER		27
+#define CLK_BUS_SPI0		28
+#define CLK_BUS_OTG		29
+#define CLK_BUS_EHCI0		30
+#define CLK_BUS_OHCI0		31
+#define CLK_BUS_VE		32
+#define CLK_BUS_TCON0		33
+#define CLK_BUS_CSI		34
+#define CLK_BUS_DE		35
+#define CLK_BUS_CODEC		36
+#define CLK_BUS_PIO		37
+#define CLK_BUS_I2C0		38
+#define CLK_BUS_I2C1		39
+#define CLK_BUS_UART0		40
+#define CLK_BUS_UART1		41
+#define CLK_BUS_UART2		42
+#define CLK_BUS_EPHY		43
+#define CLK_BUS_DBG		44
+
+#define CLK_MMC0		45
+#define CLK_MMC0_SAMPLE		46
+#define CLK_MMC0_OUTPUT		47
+#define CLK_MMC1		48
+#define CLK_MMC1_SAMPLE		49
+#define CLK_MMC1_OUTPUT		50
+#define CLK_MMC2		51
+#define CLK_MMC2_SAMPLE		52
+#define CLK_MMC2_OUTPUT		53
+#define CLK_CE			54
+#define CLK_SPI0		55
+#define CLK_USB_PHY0		56
+#define CLK_USB_OHCI0		57
+
+#define CLK_DRAM_VE		59
+#define CLK_DRAM_CSI		60
+#define CLK_DRAM_EHCI		61
+#define CLK_DRAM_OHCI		62
+#define CLK_DE			63
+#define CLK_TCON0		64
+#define CLK_CSI_MISC		65
+#define CLK_CSI0_MCLK		66
+#define CLK_CSI1_SCLK		67
+#define CLK_CSI1_MCLK		68
+#define CLK_VE			69
+#define CLK_AC_DIG		70
+#define CLK_AVS			71
+
+#define CLK_MIPI_CSI		73
+
+#endif /* _DT_BINDINGS_CLK_SUN8I_V3S_H_ */
diff --git a/include/dt-bindings/reset/sun8i-v3s-ccu.h b/include/dt-bindings/reset/sun8i-v3s-ccu.h
new file mode 100644
index 0000000000..b58ef21a2e
--- /dev/null
+++ b/include/dt-bindings/reset/sun8i-v3s-ccu.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
+ *
+ * Based on sun8i-v3s-ccu.h, which is
+ * Copyright (C) 2016 Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#ifndef _DT_BINDINGS_RST_SUN8I_V3S_H_
+#define _DT_BINDINGS_RST_SUN8I_V3S_H_
+
+#define RST_USB_PHY0		0
+
+#define RST_MBUS		1
+
+#define RST_BUS_CE		5
+#define RST_BUS_DMA		6
+#define RST_BUS_MMC0		7
+#define RST_BUS_MMC1		8
+#define RST_BUS_MMC2		9
+#define RST_BUS_DRAM		11
+#define RST_BUS_EMAC		12
+#define RST_BUS_HSTIMER		14
+#define RST_BUS_SPI0		15
+#define RST_BUS_OTG		17
+#define RST_BUS_EHCI0		18
+#define RST_BUS_OHCI0		22
+#define RST_BUS_VE		26
+#define RST_BUS_TCON0		27
+#define RST_BUS_CSI		30
+#define RST_BUS_DE		34
+#define RST_BUS_DBG		38
+#define RST_BUS_EPHY		39
+#define RST_BUS_CODEC		40
+#define RST_BUS_I2C0		46
+#define RST_BUS_I2C1		47
+#define RST_BUS_UART0		49
+#define RST_BUS_UART1		50
+#define RST_BUS_UART2		51
+
+#endif /* _DT_BINDINGS_RST_SUN8I_H3_H_ */