diff options
| -rw-r--r-- | board/atmel/sama5d2_icp/sama5d2_icp.c | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/board/atmel/sama5d2_icp/sama5d2_icp.c b/board/atmel/sama5d2_icp/sama5d2_icp.c index 807cfcdb19..1c28aaba85 100644 --- a/board/atmel/sama5d2_icp/sama5d2_icp.c +++ b/board/atmel/sama5d2_icp/sama5d2_icp.c @@ -73,6 +73,23 @@ int misc_init_r(void) /* SPL */ #ifdef CONFIG_SPL_BUILD +/* deassert reset lines for external periph in case of warm reboot */ +static void board_reset_additional_periph(void) +{ + atmel_pio4_set_pio_output(AT91_PIO_PORTB, 16, 0); /* LAN9252_RST */ + atmel_pio4_set_pio_output(AT91_PIO_PORTC, 2, 0); /* HSIC_RST */ + atmel_pio4_set_pio_output(AT91_PIO_PORTC, 17, 0); /* USB2534_RST */ + atmel_pio4_set_pio_output(AT91_PIO_PORTD, 4, 0); /* KSZ8563_RST */ +} + +static void board_start_additional_periph(void) +{ + atmel_pio4_set_pio_output(AT91_PIO_PORTB, 16, 1); /* LAN9252_RST */ + atmel_pio4_set_pio_output(AT91_PIO_PORTC, 2, 1); /* HSIC_RST */ + atmel_pio4_set_pio_output(AT91_PIO_PORTC, 17, 1); /* USB2534_RST */ + atmel_pio4_set_pio_output(AT91_PIO_PORTD, 4, 1); /* KSZ8563_RST */ +} + #ifdef CONFIG_SD_BOOT void spl_mmc_init(void) { @@ -93,12 +110,18 @@ void spl_board_init(void) #ifdef CONFIG_SD_BOOT spl_mmc_init(); #endif + board_reset_additional_periph(); } void spl_display_print(void) { } +void spl_board_prepare_for_boot(void) +{ + board_start_additional_periph(); +} + static void ddrc_conf(struct atmel_mpddrc_config *ddrc) { ddrc->md = (ATMEL_MPDDRC_MD_DBW_32_BITS | ATMEL_MPDDRC_MD_DDR3_SDRAM); |