diff options
134 files changed, 5369 insertions, 429 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c53656695a..2ef2976855 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -404,6 +404,7 @@ M: Michal Simek <michal.simek@xilinx.com> S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git F: arch/arm/mach-versal/ +N: (?<!uni)versal ARM VERSATILE EXPRESS DRIVERS M: Liviu Dudau <liviu.dudau@foss.arm.com> @@ -442,11 +443,13 @@ S: Maintained T: git https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze.git F: arch/arm/mach-zynqmp/ F: drivers/clk/clk_zynqmp.c +F: driver/firmware/firmware-zynqmp.c F: drivers/fpga/zynqpl.c F: drivers/gpio/zynq_gpio.c F: drivers/i2c/i2c-cdns.c F: drivers/i2c/muxes/pca954x.c F: drivers/i2c/zynq_i2c.c +F: drivers/mailbox/zynqmp-ipi.c F: drivers/mmc/zynq_sdhci.c F: drivers/mtd/nand/raw/zynq_nand.c F: drivers/net/phy/xilinx_phy.c @@ -458,6 +461,7 @@ F: drivers/timer/cadence-ttc.c F: drivers/usb/host/ehci-zynq.c F: drivers/watchdog/cdns_wdt.c F: include/zynqmppl.h +F: include/zynqmp_firmware.h F: tools/zynqmp* N: ultra96 N: zynqmp diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 384e382e24..c5027c1338 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -462,6 +462,22 @@ config TPL_USE_ARCH_MEMSET Such implementation may be faster under some conditions but may increase the binary size. +config SET_STACK_SIZE + bool "Enable an option to set max stack size that can be used" + default y if ARCH_VERSAL || ARCH_ZYNQMP + help + This will enable an option to set max stack size that can be + used by u-boot. + +config STACK_SIZE + hex "Define max stack size that can be used by u-boot" + depends on SET_STACK_SIZE + default 0x4000000 if ARCH_VERSAL || ARCH_ZYNQMP + help + Defines Max stack size that can be used by u-boot so that the + initrd_high will be calculated as base stack pointer minus this + stack size. + config ARM64_SUPPORT_AARCH32 bool "ARM64 system support AArch32 execution state" depends on ARM64 @@ -980,6 +996,7 @@ config ARCH_VERSAL select DM_MMC if MMC select DM_SERIAL select OF_CONTROL + imply BOARD_LATE_INIT config ARCH_VF610 bool "Freescale Vybrid" @@ -1034,16 +1051,21 @@ config ARCH_ZYNQMP select CLK select DM select DM_ETH if NET + select DM_MAILBOX select DM_MMC if MMC select DM_SERIAL select DM_SPI if SPI select DM_SPI_FLASH if DM_SPI select DM_USB if USB + select FIRMWARE select OF_CONTROL select SPL_BOARD_INIT if SPL select SPL_CLK if SPL + select SPL_DM_MAILBOX if SPL + select SPL_FIRMWARE if SPL select SPL_SEPARATE_BSS if SPL select SUPPORT_SPL + select ZYNQMP_IPI imply BOARD_LATE_INIT imply CMD_DM imply FAT_WRITE diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 73d47f5ac4..727da1a280 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -247,6 +247,10 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ dtb-$(CONFIG_ARCH_ZYNQMP) += \ avnet-ultra96-rev1.dtb \ avnet-ultrazedev-cc-v1.0-ultrazedev-som-v1.0.dtb \ + zynqmp-a2197-revA.dtb \ + zynqmp-a2197-g-revA.dtb \ + zynqmp-a2197-m-revA.dtb \ + zynqmp-a2197-p-revA.dtb \ zynqmp-mini.dtb \ zynqmp-mini-emmc0.dtb \ zynqmp-mini-emmc1.dtb \ diff --git a/arch/arm/dts/zynq-cse-qspi-single.dts b/arch/arm/dts/zynq-cse-qspi-single.dts index 0d680dfc06..ac6982a74e 100644 --- a/arch/arm/dts/zynq-cse-qspi-single.dts +++ b/arch/arm/dts/zynq-cse-qspi-single.dts @@ -7,6 +7,10 @@ #include "zynq-cse-qspi.dtsi" +/ { + model = "Zynq CSE QSPI SINGLE Board"; +}; + &flash0 { spi-rx-bus-width = <4>; }; diff --git a/arch/arm/dts/zynq-zc702.dts b/arch/arm/dts/zynq-zc702.dts index 54231cd580..d10695740f 100644 --- a/arch/arm/dts/zynq-zc702.dts +++ b/arch/arm/dts/zynq-zc702.dts @@ -16,6 +16,7 @@ serial0 = &uart1; spi0 = &qspi; mmc0 = &sdhci0; + usb0 = &usb0; }; memory@0 { diff --git a/arch/arm/dts/zynqmp-a2197-g-revA.dts b/arch/arm/dts/zynqmp-a2197-g-revA.dts new file mode 100644 index 0000000000..c6072b5f42 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-g-revA.dts @@ -0,0 +1,282 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller on MGT + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 MGT Char board RevA"; + compatible = "xlnx,zynqmp-a2197-g-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + mmc0 = &sdhci0; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &dcc; + usb0 = &usb0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&gem0 { /* eth MDIO 76/77 */ + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; + is-internal-pcspma; + phy0: phy@0 { /* marwell m88e1512 */ + reg = <0>; + reset-gpios = <&gpio 42 GPIO_ACTIVE_LOW>; +/* xlnx,phy-type = <PHY_TYPE_SGMII>; */ + }; +/* phy-names = "..."; + phys = <&lane0 PHY_TYPE_SGMII ... > + Note: lane0 sgmii/lane1 usb3 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "", "", "", /* 5 - 9 */ + "", "", "", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "", "", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "", "", "ETH_RESET_B", "", "", /* 40 - 44 */ + "", "", "", "", "", /* 45 - 49 */ + "", "", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "", /* 60 - 64 */ + "", "", "", "", "", /* 65 - 69 */ + "", "", "", "", "", /* 70 - 74 */ + "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ + "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */ + "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */ + "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */ + "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */ + "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */ + "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */ + "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */ + "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ + "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + scl-gpios = <&gpio 34 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + i2c-mux@74 { /* u94 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + reg = <0x50>; + }; + }; + i2c@1 { /* CM_I2C_SCL - Samtec */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + i2c@2 { /* PMBUS - AFX_PMBUS */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + tps544@10 { /* u73 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + tps544@11 { /* u76 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + tps544@12 { /* u77 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + tps544@13 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + tps544@14 { /* u81 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + tps544@15 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + tps544@16 { /* u63 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + tps544@17 { /* u66 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + tps544@18 { /* u67 */ + compatible = "ti,tps544b25"; + reg = <0x18>; + }; + tps544@19 { /* u69 */ + compatible = "ti,tps544b25"; + reg = <0x19>; + }; + tps544@1d { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0x1d>; + }; + tps544@1e { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + tps544@1f { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0x1f>; + }; + tps544@20 { /* u71 */ + compatible = "ti,tps544b25"; + reg = <0x20>; + }; + ina226@40 { /* u74 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + ina226@41 { /* u75 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + ina226@42 { /* u78 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + ina226@43 { /* u79 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <1000>; + }; + ina226@44 { /* u82 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <1000>; + }; + ina226@45 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + tps53681@c0 { /* u53 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + }; + }; + i2c@3 { /* fmc1 via JA2G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + eeprom_fmc1: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@4 { /* fmc2 via JA3G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + eeprom_fmc2: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@5 { /* fmc3 via JA4G */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + eeprom_fmc3: eeprom@50 { /* on FMC */ + compatible = "atmel,24c04"; + reg = <0x50>; + }; + }; + i2c@6 { /* ddr dimm */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + }; + /* 7 unused */ + }; +}; + +&usb0 { /* USB0 MIO52-63 */ + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + maximum-speed = "high-speed"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-m-revA.dts b/arch/arm/dts/zynqmp-a2197-m-revA.dts new file mode 100644 index 0000000000..e4b45eafe4 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-m-revA.dts @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 Memory Char board RevA"; + compatible = "xlnx,zynqmp-a2197-m-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + spi0 = &qspi; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; +}; + +&qspi { + status = "okay"; + is-dual = <1>; + flash@0 { + compatible = "m25p80", "spi-flash"; /* 32MB */ + #address-cells = <1>; + #size-cells = <1>; + reg = <0x0>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; /* FIXME tap delay */ +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "disable"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; + phy0: phy@0 { /* marwell m88e1512 - SGMII */ + reg = <0>; +/* xlnx,phy-type = <PHY_TYPE_SGMII>; */ + }; +/* phy-names = "..."; + phys = <&lane0 PHY_TYPE_SGMII ... > + Note: lane0 sgmii/lane1 usb3 */ +}; + +&gpio { + status = "okay"; + gpio-line-names = "SCLK_OUT", "MISO_MO1", "MO2", "MO3", "MOSI_MIO0", /* 0 - 4 */ + "N_SS_OUT", "", "SYS_CTRL0", "SYS_CTRL1", "SYS_CTRL2", /* 5 - 9 */ + "SYS_CTRL3", "SYS_CTRL4", "SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "RXD0_IN", "TXD0_OUT", "TXD1_OUT", "RXD1_IN", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "", "", "", "", "", /* 78 - 79 */ + "", "", "", "", "", /* 80 - 84 */ + "", "", "", "", "", /* 85 -89 */ + "", "", "", "", "", /* 90 - 94 */ + "", "", "", "", "", /* 95 - 99 */ + "", "", "", "", "", /* 100 - 104 */ + "", "", "", "", "", /* 105 - 109 */ + "", "", "", "", "", /* 110 - 114 */ + "", "", "", "", "", /* 115 - 119 */ + "", "", "", "", "", /* 120 - 124 */ + "", "", "", "", "", /* 125 - 129 */ + "", "", "", "", "", /* 130 - 134 */ + "", "", "", "", "", /* 135 - 139 */ + "", "", "", "", "", /* 140 - 144 */ + "", "", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u46 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { /* PMBUS must be enabled via SW21 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + reg_vcc1v2_lp4: tps544@15 { /* u97 */ + compatible = "ti,tps544b25"; + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u95 */ + compatible = "ti,tps544b25"; + reg = <0x16>; + }; + reg_vdd1_1v8_lp4: tps544@17 { /* u99 */ + compatible = "ti,tps544b25"; + reg = <0x17>; + }; + /* UTIL_PMBUS connection */ + reg_vcc1v8: tps544@13 { /* u92 */ + compatible = "ti,tps544b25"; + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u93 */ + compatible = "ti,tps544b25"; + reg = <0x14>; + }; + reg_vcc5v0: tps544@1e { /* u94 */ + compatible = "ti,tps544b25"; + reg = <0x1e>; + }; + }; + i2c@1 { /* PMBUS_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + vcc_aux: ina226@42 { /* u86 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc1v1_lp4: ina226@46 { /* u96 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc1v2_lp4: ina226@47 { /* u98 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vdd1_1v8_lp4: ina226@48 { /* u100 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <5000>; + }; + vcc0v6_lp4: ina226@49 { /* u101 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + reg_vccint: tps53681@c0 { /* u69 */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + }; + reg_vcc_pmc: tps544@7 { /* u80 */ + compatible = "ti,tps544b25"; + reg = <0x7>; + }; + reg_vcc_ram: tps544@8 { /* u82 */ + compatible = "ti,tps544b25"; + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u83 */ + compatible = "ti,tps544b25"; + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u84 */ + compatible = "ti,tps544b25"; + reg = <0xa>; + }; + reg_vccaux: tps544@d { /* u85 */ + compatible = "ti,tps544b25"; + reg = <0xd>; + }; + reg_vccaux_pmc: tps544@e { /* u87 */ + compatible = "ti,tps544b25"; + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u88 */ + compatible = "ti,tps544b25"; + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u89 */ + compatible = "ti,tps544b25"; + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u90 */ + compatible = "ti,tps544b25"; + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u91 */ + compatible = "ti,tps544b25"; + reg = <0x12>; + }; + }; + i2c@3 { /* MEM PMBUS - FIXME bug in schematics */ + #address-cells = <1>; + #size-cells = <0>; + /* reg = <3>; */ + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to U20G */ + }; + /* 5-7 unused */ + }; +}; + +/* TODO sysctrl via J239 */ +/* TODO samtec J212G/H via J242 */ +/* TODO teensy via U30 PCA9543A bus 1 */ +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* FIXME reset connected to SYSCTRL_IIC_MUX1_RESET */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u51 - m24128 16kB FIXME addr */ + compatible = "atmel,24c08"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u26 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec U20D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@1 { /* UTIL_PMBUS - FIXME incorrect schematics */ + #address-cells = <1>; + #size-cells = <0>; + /* reg = <1>; */ + }; + i2c@2 { /* C0_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + si570_c0_lp4: clock-generator@5d { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C0_LP4_SI570_CLK"; + }; + }; + i2c@3 { /* C1_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_c1_lp4: clock-generator@5d { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C1_LP4_SI570_CLK"; + }; + }; + i2c@4 { /* C2_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_c2_lp4: clock-generator@5d { /* u10 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C2_LP4_SI570_CLK"; + }; + }; + i2c@5 { /* C3_LP4 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_c3_lp4: clock-generator@5d { /* u15 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <30000000>; + clock-frequency = <30000000>; + clock-output-names = "C3_LP4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u19 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* FIXME addr */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "HSDP_SI570"; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "host"; + /* dr_mode = "peripheral"; */ + maximum-speed = "high-speed"; +}; + +&usb1 { + status = "disabled"; /* not at mem board */ + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "disabled"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-p-revA.dts b/arch/arm/dts/zynqmp-a2197-p-revA.dts new file mode 100644 index 0000000000..322b36e391 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-p-revA.dts @@ -0,0 +1,567 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 Processor Char board RevA"; /* Tenzing */ + compatible = "xlnx,zynqmp-a2197-p-revA", "xlnx,zynqmp-a2197-revA", + "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + ethernet0 = &gem0; + gpio0 = &gpio; + i2c0 = &i2c0; + i2c1 = &i2c1; + mmc0 = &sdhci0; + mmc1 = &sdhci1; + rtc0 = &rtc; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &dcc; + usb0 = &usb0; + usb1 = &usb1; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom>; + /* xlnx,fmc-eeprom = FIXME */ + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; /* FIXME don't know how big memory is there */ + }; +}; + +&sdhci0 { /* emmc MIO 13-23 - with some settings 16GB */ + status = "okay"; + non-removable; + disable-wp; + bus-width = <8>; + xlnx,mio_bank = <0>; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&uart1 { /* uart1 MIO40-41 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&sdhci1 { /* sd1 MIO45-51 cd in place */ + status = "okay"; + no-1-8-v; + disable-wp; + xlnx,mio_bank = <1>; +}; + +&gem0 { + status = "okay"; + phy-handle = <&phy0>; + phy-mode = "sgmii"; /* DTG generates this properly 1512 */ + is-internal-pcspma; + /* phy-reset-gpios = <&gpio 142 GPIO_ACTIVE_LOW>; */ + phy0: phy@0 { + reg = <0>; + }; +}; + +&gpio { + status = "okay"; + gpio-line-names = "", "", "", "", "", /* 0 - 4 */ + "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */ + "DC_SYS_CTRL3", "DC_SYS_CTRL4", "DC_SYS_CTRL5", "EMMC_DAT0", "EMMC_DAT1", /* 10 - 14 */ + "EMMC_DAT2", "EMMC_DAT3", "EMMC_DAT4", "EMMC_DAT5", "EMMC_DAT6", /* 15 - 19 */ + "EMMC_DAT7", "EMMC_CMD", "EMMC_CLK", "EMMC_RST_B", "", /* 20 - 24 */ + "", "", "", "", "", /* 25 - 29 */ + "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ + "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ + "UART1_TXD_OUT", "UART1_RXD_IN", "ETH_RESET_B", "", "", /* 40 - 44 */ + "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ + "SD1_CMD", "SD1_CLK", "USB0_CLK", "USB0_DIR", "USB0_DATA2", /* 50 - 54 */ + "USB0_NXT", "USB0_DATA0", "USB0_DATA1", "USB0_STP", "USB0_DATA3", /* 55 - 59 */ + "USB0_DATA4", "USB0_DATA5", "USB0_DATA6", "USB0_DATA7", "USB1_CLK", /* 60 - 64 */ + "USB1_DIR", "USB1_DATA2", "USB1_NXT", "USB1_DATA0", "USB1_DATA1", /* 65 - 69 */ + "USB1_STP", "USB1_DATA3", "USB1_DATA4", "USB1_DATA5", "USB1_DATA6", /* 70 - 74 */ + "USB1_DATA7", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ + "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ + "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "SYSCTLR_POWER_EN", /* 80 - 84 */ + "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "SYSCTLR_LP_I2C_SM_ALERT", /* 85 -89 */ + "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ + "SYSCTLR_GPIO5", "VCCO_500_RBIAS", "VCCO_501_RBIAS", "VCCO_502_RBIAS", "VCCO_500_RBIAS_LED", /* 95 - 99 */ + "VCCO_501_RBIAS_LED", "VCCO_502_RBIAS_LED", "SYSCTLR_VCCINT_EN", "SYSCTLR_VCC_IO_SOC_EN", "SYSCTLR_VCC_PMC_EN", /* 100 - 104 */ + "SYSCTLR_VCC_RAM_EN", "SYSCTLR_VCC_PSLP_EN", "SYSCTLR_VCC_PSFP_EN", "SYSCTLR_VCCAUX_EN", "SYSCTLR_VCCAUX_PMC_EN", /* 105 - 109 */ + "SYSCTLR_VCCO_500_EN", "SYSCTLR_VCCO_501_EN", "SYSCTLR_VCCO_502_EN", "SYSCTLR_VCCO_503_EN", "SYSCTLR_VCC1V8_EN", /* 110 - 114 */ + "SYSCTLR_VCC3V3_EN", "SYSCTLR_VCC1V2_DDR4_EN", "SYSCTLR_VCC1V1_LP4_EN", "SYSCTLR_VDD1_1V8_LP4_EN", "SYSCTLR_VADJ_FMC_EN", /* 115 - 119 */ + "SYSCTLR_MGTYAVCC_EN", "SYSCTLR_MGTYAVTT_EN", "SYSCTLR_MGTYVCCAUX_EN", "SYSCTLR_UTIL_1V13_EN", "SYSCTLR_UTIL_1V8_EN", /* 120 - 124 */ + "SYSCTLR_UTIL_2V5_EN", "FMCP1_FMC_PRSNT_M2C_B", "FMCP2_FMC_PRSNT_M2C_B", "FMCP1_FMCP_PRSNT_M2C_B", "FMCP2_FMCP_PRSNT_M2C_B", /* 125 - 129 */ + "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "SYSCTLR_USBC_SBU1", "SYSCTLR_USBC_SBU2", "TI_CABLE1", /* 130 - 134 */ + "TI_CABLE2", "SYSCTLR_MIC2005_EN_B", "SYSCTLR_MIC2005_FAULT_B", "SYSCTLR_TUSB320_INT_B", "SYSCTLR_TUSB320_ID", /* 135 - 139 */ + "PMBUS1_ALERT", "PMBUS2_ALERT", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ + "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ + "", "", "", "", "", /* 150 - 154 */ + "", "", "", "", "", /* 155 - 159 */ + "", "", "", "", "", /* 160 - 164 */ + "", "", "", "", "", /* 165 - 169 */ + "", "", "", ""; /* 170 - 174 */ +}; + +&i2c0 { /* MIO 34-35 - can't stay here */ + status = "okay"; + clock-frequency = <400000>; + i2c-mux@74 { /* u33 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ + i2c@0 { /* PMBUS1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* On connector J98 */ + reg_vcc_fmc: tps544@7 { /* u80 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x7>; + regulator-name = "reg_vcc_fmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2600000>; + /* enable-gpio = <&gpio0 23 0x4>; optional */ + }; + reg_vcc_ram: tps544@8 { /* u83 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x8>; + }; + reg_vcc_pslp: tps544@9 { /* u85 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x9>; + }; + reg_vcc_psfp: tps544@a { /* u86 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xa>; + }; + reg_vccint: tps53681@c0 { /* u70 - FIXME name - don't know what it does - also vcc_io_soc */ + compatible = "ti,tps53681"; /* FIXME no linux driver */ + reg = <0xc0>; + /* vccint, vcc_io_soc */ + }; + }; + i2c@1 { /* PMBUS1_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME check alerts comming to SC */ + vcc_fmc: ina226@42 { /* u81 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcc_ram: ina226@43 { /* u82 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcc_pslp: ina226@44 { /* u84 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcc_psfp: ina226@45 { /* u87 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + }; + i2c@2 { /* PMBUS2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* On connector J104 */ + reg_vccaus: tps544@d { /* u88 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xd>; + }; + reg_vccaux_fmc: tps544@e { /* u90 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xe>; + }; + reg_vcco_500: tps544@f { /* u93 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0xf>; + }; + reg_vcco_501: tps544@10 { /* u95 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x10>; + }; + reg_vcco_502: tps544@11 { /* u97 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x11>; + }; + reg_vcco_503: tps544@12 { /* u99 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x12>; + }; + reg_vcc1v8: tps544@13 { /* u101 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x13>; + }; + reg_vcc3v3: tps544@14 { /* u102 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x14>; + }; + reg_vcc1v2_ddr4: tps544@15 { /* u104 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x15>; + }; + reg_vcc1v1_lp4: tps544@16 { /* u106 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x16>; + }; + reg_vcc1_1V8_lp4: tps544@17 { /* u108 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x17>; + }; + reg_vadj_fmc: tps544@19 { /* u109 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x19>; + }; + reg_mgtyavcc: tps544@1a { /* u111 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1a>; + }; + reg_mgtyavtt: tps544@1b { /* u114 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1b>; + }; + reg_mgtyvccaux: tps544@1c { /* u115 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1c>; + }; + reg_util_1v13: tps544@1d { /* u117 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1d>; + }; + reg_util_1v8: tps544@1e { /* u118 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1e>; + }; + reg_util_2v5: tps544@1f { /* u119 - FIXME name - don't know what it does */ + compatible = "ti,tps544b25"; /* Documentation/hwmon/pmbus - wiring is missing */ + reg = <0x1f>; + }; + }; + i2c@3 { /* PMBUS2_INA226 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + /* FIXME check alerts coming to SC */ + vccaux: ina226@40 { /* u89 */ + compatible = "ti,ina226"; + reg = <0x40>; + shunt-resistor = <5000>; + }; + vccaux_fmc: ina226@41 { /* u91 */ + compatible = "ti,ina226"; + reg = <0x41>; + shunt-resistor = <5000>; + }; + vcco_500: ina226@42 { /* u92 */ + compatible = "ti,ina226"; + reg = <0x42>; + shunt-resistor = <5000>; + }; + vcco_501: ina226@43 { /* u94 */ + compatible = "ti,ina226"; + reg = <0x43>; + shunt-resistor = <5000>; + }; + vcco_502: ina226@44 { /* u96 */ + compatible = "ti,ina226"; + reg = <0x44>; + shunt-resistor = <5000>; + }; + vcco_503: ina226@45 { /* u98 */ + compatible = "ti,ina226"; + reg = <0x45>; + shunt-resistor = <5000>; + }; + vcc_1v8: ina226@46 { /* u100 */ + compatible = "ti,ina226"; + reg = <0x46>; + shunt-resistor = <5000>; + }; + vcc_3v3: ina226@47 { /* u103 */ + compatible = "ti,ina226"; + reg = <0x47>; + shunt-resistor = <5000>; + }; + vcc_1v2_ddr4: ina226@48 { /* u105 */ + compatible = "ti,ina226"; + reg = <0x48>; + shunt-resistor = <1000>; + }; + vcc1v1_lp4: ina226@49 { /* u107 */ + compatible = "ti,ina226"; + reg = <0x49>; + shunt-resistor = <5000>; + }; + vadj_fmc: ina226@4a { /* u110 */ + compatible = "ti,ina226"; + reg = <0x4a>; + shunt-resistor = <5000>; + }; + mgtyavcc: ina226@4b { /* u112 */ + compatible = "ti,ina226"; + reg = <0x4b>; + shunt-resistor = <1000>; + }; + mgtyavtt: ina226@4c { /* u113 */ + compatible = "ti,ina226"; + reg = <0x4c>; + shunt-resistor = <1000>; + }; + mgtyvccaux: ina226@4d { /* u116 */ + compatible = "ti,ina226"; + reg = <0x4d>; + shunt-resistor = <5000>; + }; + vcc_bat: ina226@4e { /* u12 */ + compatible = "ti,ina226"; + reg = <0x4e>; + shunt-resistor = <10000000>; /* 10 ohm */ + }; + }; + i2c@4 { /* LP_I2C_SM */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + /* connected to J212G */ + /* zynqmp sm alert or samtec J212H */ + }; + /* 5-7 unused */ + }; +}; + +&i2c1 { /* i2c1 MIO 36-37 */ + status = "okay"; + clock-frequency = <400000>; + + /* Must be enabled via J242 */ + eeprom_versal: eeprom@51 { /* x-prc-01-revA u116, x-prc-02-revA u12 */ + compatible = "atmel,24c02"; + reg = <0x51>; + }; + + i2c-mux@74 { /* u35 */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */ + dc_i2c: i2c@0 { /* DC_I2C */ + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom: eeprom@54 { /* u34 - m24128 16kB */ + compatible = "st,24c128", "atmel,24c128"; + reg = <0x54>; + }; + si570_ref_clk: clock-generator@5d { /* u32 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* 570JAC000900DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* Connection via Samtec J212D */ + /* Use for storing information about X-PRC card */ + x_prc_eeprom: eeprom@52 { /* x-prc-01-revA u120, x-prc-02-revA u16 */ + compatible = "atmel,24c02"; + reg = <0x52>; + }; + + /* Use for setting up certain features on X-PRC card */ + x_prc_tca9534: gpio@22 { /* x-prc-01-revA u121, x-prc-02-revA u17 */ + compatible = "nxp,pca9534"; + reg = <0x22>; + gpio-controller; /* IRQ not connected */ + #gpio-cells = <2>; + gpio-line-names = "sw4_1", "sw4_2", "sw4_3", "sw4_4", + "", "", "", ""; + gtr_sel0 { + gpio-hog; + gpios = <0 0>; + input; /* FIXME add meaning */ + line-name = "sw4_1"; + }; + gtr_sel1 { + gpio-hog; + gpios = <1 0>; + input; /* FIXME add meaning */ + line-name = "sw4_2"; + }; + gtr_sel2 { + gpio-hog; + gpios = <2 0>; + input; /* FIXME add meaning */ + line-name = "sw4_3"; + }; + gtr_sel3 { + gpio-hog; + gpios = <3 0>; + input; /* FIXME add meaning */ + line-name = "sw4_4"; + }; + }; + }; + i2c@1 { /* FMCP1_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + /* FIXME connection to Samtec J51C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@2 { /* FMCP2_IIC */ + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + /* FIXME connection to Samtec J53C */ + /* expected eeprom 0x50 SE cards */ + }; + i2c@3 { /* DDR4_DIMM1 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + si570_ddr_dimm1: clock-generator@60 { /* u2 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* 0x50 SPD? */ + }; + i2c@4 { /* DDR4_DIMM2 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + si570_ddr_dimm2: clock-generator@60 { /* u3 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "REF_CLK"; /* FIXME */ + }; + /* 0x50 SPD? */ + }; + i2c@5 { /* LPDDR4_SI570_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + si570_lpddr4: clock-generator@60 { /* u4 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x60>; /* 570BAB000299DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "LPDDR4_SI570_CLK"; + }; + }; + i2c@6 { /* HSDP_SI570 */ + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + si570_hsdp: clock-generator@5d { /* u5 */ + #clock-cells = <0>; + compatible = "silabs,si570"; + reg = <0x5d>; /* 570JAC000900DG */ + temperature-stability = <50>; + factory-fout = <156250000>; /* FIXME every chip can be different - 10MHZ_TO_810MHZ */ + clock-frequency = <33333333>; + clock-output-names = "HSDP_SI570"; + }; + }; + i2c@7 { /* PCIE_CLK */ + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + /* u36 0xd8 or 0xde - pcie clk buf - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */ + /* u37 0xd0 DNP - pcie clocking 1 - 9FGV1006BQ505LTGI - PCIe GEN 4 CLOCK GENERATOR FIXME - no linux driver */ + /* u38 0xca - pcie clocking 2 - 9ZML1241EKILF PCIe GEN 4 CLOCK BUFFER FIXME - no driver */ + clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 - pcie clocking 3 */ + #clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/ + compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */ + reg = <0xd8>; + /* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */ + /* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */ + + }; + + }; + }; +}; + +&usb0 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_0 { + status = "okay"; + dr_mode = "peripheral"; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + maximum-speed = "super-speed"; +}; + +&usb1 { + status = "okay"; + xlnx,usb-polarity = <0>; + xlnx,usb-reset-mode = <0>; +}; + +&dwc3_1 { + /delete-property/ phy-names ; + /delete-property/ phys ; + dr_mode = "host"; + maximum-speed = "high-speed"; + snps,dis_u2_susphy_quirk ; + snps,dis_u3_susphy_quirk ; + status = "okay"; +}; + +&xilinx_ams { + status = "okay"; +}; + +&ams_ps { + status = "okay"; +}; + +&ams_pl { + status = "okay"; +}; diff --git a/arch/arm/dts/zynqmp-a2197-revA.dts b/arch/arm/dts/zynqmp-a2197-revA.dts new file mode 100644 index 0000000000..3153138542 --- /dev/null +++ b/arch/arm/dts/zynqmp-a2197-revA.dts @@ -0,0 +1,89 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dts file for Xilinx Versal a2197 RevA System Controller + * + * (C) Copyright 2019, Xilinx, Inc. + * + * Michal Simek <michal.simek@xilinx.com> + */ +/dts-v1/; + +#include "zynqmp.dtsi" +#include "zynqmp-clk-ccf.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Versal System Controller on a2197 board RevA"; + compatible = "xlnx,zynqmp-a2197-revA", "xlnx,zynqmp-a2197", "xlnx,zynqmp"; + + aliases { + i2c0 = &i2c0; + serial0 = &uart0; + }; + + chosen { + bootargs = "earlycon"; + stdout-path = "serial0:115200n8"; + xlnx,eeprom = <&eeprom1 &eeprom0 &eeprom0>; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; +}; + +&uart0 { /* uart0 MIO38-39 */ + status = "okay"; + u-boot,dm-pre-reloc; +}; + +&i2c0 { + status = "okay"; + u-boot,dm-pre-reloc; + clock-frequency = <400000>; + i2c-mux@74 { /* this cover MGT board */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + u-boot,dm-pre-reloc; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom0: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + u-boot,dm-pre-reloc; + reg = <0x50>; + }; + }; + }; +}; + +&i2c1 { + status = "okay"; + u-boot,dm-pre-reloc; + clock-frequency = <400000>; + i2c-mux@74 { /* This cover processor board */ + compatible = "nxp,pca9548"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x74>; + u-boot,dm-pre-reloc; + /* FIXME reset connected to SYSCTRL_IIC_MUX0_RESET */ + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + /* Use for storing information about SC board */ + eeprom1: eeprom@50 { /* u96 - 24LC32A - 256B */ + compatible = "atmel,24c32"; + u-boot,dm-pre-reloc; + reg = <0x50>; + }; + }; + }; +}; diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi index a795efdc15..c70f85a430 100644 --- a/arch/arm/dts/zynqmp-clk.dtsi +++ b/arch/arm/dts/zynqmp-clk.dtsi @@ -38,6 +38,7 @@ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <300000000>; + u-boot,dm-pre-reloc; }; clk600: clk600 { diff --git a/arch/arm/dts/zynqmp-mini-qspi.dts b/arch/arm/dts/zynqmp-mini-qspi.dts index 1716d5179d..e4ba5ae9b6 100644 --- a/arch/arm/dts/zynqmp-mini-qspi.dts +++ b/arch/arm/dts/zynqmp-mini-qspi.dts @@ -64,7 +64,7 @@ &qspi { status = "okay"; flash0: flash@0 { - compatible = "n25q512a11", "spi-flash"; + compatible = "n25q512a11", "jedec,spi-nor"; #address-cells = <1>; #size-cells = <1>; reg = <0x0>; diff --git a/arch/arm/dts/zynqmp.dtsi b/arch/arm/dts/zynqmp.dtsi index dfb6ebc64c..8e35171dd0 100644 --- a/arch/arm/dts/zynqmp.dtsi +++ b/arch/arm/dts/zynqmp.dtsi @@ -96,6 +96,29 @@ }; }; + zynqmp_ipi { + u-boot,dm-pre-reloc; + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + xlnx,ipi-id = <0>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ipi_mailbox_pmu1: mailbox@ff990400 { + u-boot,dm-pre-reloc; + reg = <0x0 0xff9905c0 0x0 0x20>, + <0x0 0xff9905e0 0x0 0x20>, + <0x0 0xff990e80 0x0 0x20>, + <0x0 0xff990ea0 0x0 0x20>; + reg-names = "local_request_region" , "local_response_region", + "remote_request_region", "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <4>; + }; + }; + dcc: dcc { compatible = "arm,dcc"; status = "disabled"; @@ -116,11 +139,22 @@ method = "smc"; }; - pmufw: firmware { - compatible = "xlnx,zynqmp-pm"; - method = "smc"; - interrupt-parent = <&gic>; - interrupts = <0 35 4>; + firmware { + zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + #power-domain-cells = <0x1>; + u-boot,dm-pre-reloc; + + zynqmp_power: zynqmp-power { + u-boot,dm-pre-reloc; + compatible = "xlnx,zynqmp-power"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + mboxes = <&ipi_mailbox_pmu1 0>, <&ipi_mailbox_pmu1 1>; + mbox-names = "tx", "rx"; + }; + }; }; timer { diff --git a/arch/arm/mach-versal/Kconfig b/arch/arm/mach-versal/Kconfig index 26d1756371..a08e5ae414 100644 --- a/arch/arm/mach-versal/Kconfig +++ b/arch/arm/mach-versal/Kconfig @@ -36,11 +36,6 @@ config COUNTER_FREQUENCY config ZYNQ_SDHCI_MAX_FREQ default 200000000 -config VERSAL_OF_BOARD_DTB_ADDR - hex - default 0x1000 - depends on OF_BOARD - config IOU_SWITCH_DIVISOR0 hex "IOU switch divisor0" default 0x20 @@ -54,4 +49,11 @@ config SYS_MEM_RSVD_FOR_MMU MMU table than the one which will be allocated during relocation. +config DEFINE_TCM_OCM_MMAP + bool "Define TCM and OCM memory in MMU Table" + default y if MP + help + This option if enabled defines the TCM and OCM memory and its + memory attributes in MMU table entry. + endif diff --git a/arch/arm/mach-versal/cpu.c b/arch/arm/mach-versal/cpu.c index 70c1908ec4..49f1e51c8e 100644 --- a/arch/arm/mach-versal/cpu.c +++ b/arch/arm/mach-versal/cpu.c @@ -12,14 +12,21 @@ DECLARE_GLOBAL_DATA_PTR; -static struct mm_region versal_mem_map[] = { +#define VERSAL_MEM_MAP_USED 5 + +#define DRAM_BANKS CONFIG_NR_DRAM_BANKS + +#if defined(CONFIG_DEFINE_TCM_OCM_MMAP) +#define TCM_MAP 1 +#else +#define TCM_MAP 0 +#endif + +/* +1 is end of list which needs to be empty */ +#define VERSAL_MEM_MAP_MAX (VERSAL_MEM_MAP_USED + DRAM_BANKS + TCM_MAP + 1) + +static struct mm_region versal_mem_map[VERSAL_MEM_MAP_MAX] = { { - .virt = 0x0UL, - .phys = 0x0UL, - .size = 0x80000000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE - }, { .virt = 0x80000000UL, .phys = 0x80000000UL, .size = 0x70000000UL, @@ -34,12 +41,6 @@ static struct mm_region versal_mem_map[] = { PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN }, { - .virt = 0xffe00000UL, - .phys = 0xffe00000UL, - .size = 0x00200000UL, - .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | - PTE_BLOCK_INNER_SHARE - }, { .virt = 0x400000000UL, .phys = 0x400000000UL, .size = 0x200000000UL, @@ -59,12 +60,36 @@ static struct mm_region versal_mem_map[] = { .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) | PTE_BLOCK_NON_SHARE | PTE_BLOCK_PXN | PTE_BLOCK_UXN - }, { - /* List terminator */ - 0, } }; +void mem_map_fill(void) +{ + int banks = VERSAL_MEM_MAP_USED; + +#if defined(CONFIG_DEFINE_TCM_OCM_MMAP) + versal_mem_map[banks].virt = 0xffe00000UL; + versal_mem_map[banks].phys = 0xffe00000UL; + versal_mem_map[banks].size = 0x00200000UL; + versal_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE; + banks = banks + 1; +#endif + + for (int i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { + /* Zero size means no more DDR that's this is end */ + if (!gd->bd->bi_dram[i].size) + break; + + versal_mem_map[banks].virt = gd->bd->bi_dram[i].start; + versal_mem_map[banks].phys = gd->bd->bi_dram[i].start; + versal_mem_map[banks].size = gd->bd->bi_dram[i].size; + versal_mem_map[banks].attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) | + PTE_BLOCK_INNER_SHARE; + banks = banks + 1; + } +} + struct mm_region *mem_map = versal_mem_map; u64 get_page_table_size(void) @@ -83,16 +108,27 @@ int reserve_mmu(void) } #endif -#if defined(CONFIG_OF_BOARD) -void *board_fdt_blob_setup(void) +int versal_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, + u32 arg3, u32 *ret_payload) { - static void *fw_dtb = (void *)CONFIG_VERSAL_OF_BOARD_DTB_ADDR; + struct pt_regs regs; + + if (current_el() == 3) + return 0; - if (fdt_magic(fw_dtb) != FDT_MAGIC) { - printf("DTB is not passed via %llx\n", (u64)fw_dtb); - return NULL; + regs.regs[0] = PM_SIP_SVC | api_id; + regs.regs[1] = ((u64)arg1 << 32) | arg0; + regs.regs[2] = ((u64)arg3 << 32) | arg2; + + smc_call(®s); + + if (ret_payload) { + ret_payload[0] = (u32)regs.regs[0]; + ret_payload[1] = upper_32_bits(regs.regs[0]); + ret_payload[2] = (u32)regs.regs[1]; + ret_payload[3] = upper_32_bits(regs.regs[1]); + ret_payload[4] = (u32)regs.regs[2]; } - return fw_dtb; + return regs.regs[0]; } -#endif diff --git a/arch/arm/mach-versal/include/mach/hardware.h b/arch/arm/mach-versal/include/mach/hardware.h index 23fbc3d8f5..e26beab2e9 100644 --- a/arch/arm/mach-versal/include/mach/hardware.h +++ b/arch/arm/mach-versal/include/mach/hardware.h @@ -51,3 +51,26 @@ struct rpu_regs { }; #define rpu_base ((struct rpu_regs *)VERSAL_RPU_BASEADDR) + +#define VERSAL_CRP_BASEADDR 0xF1260000 + +struct crp_regs { + u32 reserved0[128]; + u32 boot_mode_usr; +}; + +#define crp_base ((struct crp_regs *)VERSAL_CRP_BASEADDR) + +/* Bootmode setting values */ +#define BOOT_MODES_MASK 0x0000000F +#define QSPI_MODE_24BIT 0x00000001 +#define QSPI_MODE_32BIT 0x00000002 +#define SD_MODE 0x00000003 /* sd 0 */ +#define SD_MODE1 0x00000005 /* sd 1 */ +#define EMMC_MODE 0x00000006 +#define USB_MODE 0x00000007 +#define OSPI_MODE 0x00000008 +#define SD1_LSHFT_MODE 0x0000000E /* SD1 Level shifter */ +#define JTAG_MODE 0x00000000 +#define BOOT_MODE_USE_ALT 0x100 +#define BOOT_MODE_ALT_SHIFT 12 diff --git a/arch/arm/mach-versal/include/mach/sys_proto.h b/arch/arm/mach-versal/include/mach/sys_proto.h index 1dc7bf6656..2f5ad02bf4 100644 --- a/arch/arm/mach-versal/include/mach/sys_proto.h +++ b/arch/arm/mach-versal/include/mach/sys_proto.h @@ -8,4 +8,65 @@ enum { TCM_SPLIT, }; +enum pm_api_id { + PM_GET_API_VERSION = 1, + PM_SET_CONFIGURATION, + PM_GET_NODE_STATUS, + PM_GET_OPERATING_CHARACTERISTIC, + PM_REGISTER_NOTIFIER, + PM_REQUEST_SUSPEND, + PM_SELF_SUSPEND, + PM_FORCE_POWERDOWN, + PM_ABORT_SUSPEND, + PM_REQUEST_WAKEUP, + PM_SET_WAKEUP_SOURCE, + PM_SYSTEM_SHUTDOWN, + PM_REQUEST_NODE, + PM_RELEASE_NODE, + PM_SET_REQUIREMENT, + PM_SET_MAX_LATENCY, + PM_RESET_ASSERT, + PM_RESET_GET_STATUS, + PM_MMIO_WRITE, + PM_MMIO_READ, + PM_PM_INIT_FINALIZE, + PM_FPGA_LOAD, + PM_FPGA_GET_STATUS, + PM_GET_CHIPID, + PM_SECURE_SHA = 26, + PM_SECURE_RSA, + PM_PINCTRL_REQUEST, + PM_PINCTRL_RELEASE, + PM_PINCTRL_GET_FUNCTION, + PM_PINCTRL_SET_FUNCTION, + PM_PINCTRL_CONFIG_PARAM_GET, + PM_PINCTRL_CONFIG_PARAM_SET, + PM_IOCTL, + PM_QUERY_DATA, + PM_CLOCK_ENABLE, + PM_CLOCK_DISABLE, + PM_CLOCK_GETSTATE, + PM_CLOCK_SETDIVIDER, + PM_CLOCK_GETDIVIDER, + PM_CLOCK_SETRATE, + PM_CLOCK_GETRATE, + PM_CLOCK_SETPARENT, + PM_CLOCK_GETPARENT, + PM_SECURE_IMAGE, + PM_FPGA_READ = 46, + PM_SECURE_AES, + PM_CLOCK_PLL_GETPARAM = 49, + PM_REGISTER_ACCESS = 52, + PM_EFUSE_ACCESS, + PM_FEATURE_CHECK = 63, + PM_API_MAX, +}; + +#define PM_SIP_SVC 0xC2000000 +#define PAYLOAD_ARG_CNT 4U + void tcm_init(u8 mode); +void mem_map_fill(void); + +int versal_pm_request(u32 api_id, u32 arg0, u32 arg1, u32 arg2, + u32 arg3, u32 *ret_payload); diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile index f3765e45b1..8a3b074724 100644 --- a/arch/arm/mach-zynqmp/Makefile +++ b/arch/arm/mach-zynqmp/Makefile @@ -8,7 +8,3 @@ obj-y += cpu.o obj-$(CONFIG_MP) += mp.o obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED) += psu_spl_init.o - -ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"") -obj-$(CONFIG_SPL_BUILD) += pmu_ipc.o -endif diff --git a/arch/arm/mach-zynqmp/cpu.c b/arch/arm/mach-zynqmp/cpu.c index 5ef1a52862..bb21cbcadf 100644 --- a/arch/arm/mach-zynqmp/cpu.c +++ b/arch/arm/mach-zynqmp/cpu.c @@ -9,6 +9,7 @@ #include <asm/arch/sys_proto.h> #include <asm/armv8/mmu.h> #include <asm/io.h> +#include <zynqmp_firmware.h> #define ZYNQ_SILICON_VER_MASK 0xF000 #define ZYNQ_SILICON_VER_SHIFT 12 @@ -179,29 +180,6 @@ int __maybe_unused invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, return regs.regs[0]; } -unsigned int __maybe_unused zynqmp_pmufw_version(void) -{ - int ret; - u32 ret_payload[PAYLOAD_ARG_CNT]; - static u32 pm_api_version = ZYNQMP_PM_VERSION_INVALID; - - /* - * Get PMU version only once and later - * just return stored values instead of - * asking PMUFW again. - */ - if (pm_api_version == ZYNQMP_PM_VERSION_INVALID) { - ret = invoke_smc(ZYNQMP_SIP_SVC_GET_API_VERSION, 0, 0, 0, 0, - ret_payload); - pm_api_version = ret_payload[1]; - - if (ret) - panic("PMUFW is not found - Please load it!\n"); - } - - return pm_api_version; -} - static int zynqmp_mmio_rawwrite(const u32 address, const u32 mask, const u32 value) diff --git a/arch/arm/mach-zynqmp/include/mach/sys_proto.h b/arch/arm/mach-zynqmp/include/mach/sys_proto.h index 915badc6fb..69e729fb76 100644 --- a/arch/arm/mach-zynqmp/include/mach/sys_proto.h +++ b/arch/arm/mach-zynqmp/include/mach/sys_proto.h @@ -10,7 +10,6 @@ #define PAYLOAD_ARG_CNT 5 #define ZYNQMP_CSU_SILICON_VER_MASK 0xF -#define ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD 0xC200002D #define KEY_PTR_LEN 32 #define ZYNQMP_FPGA_BIT_AUTH_DDR 1 @@ -21,21 +20,6 @@ #define ZYNQMP_FPGA_AUTH_DDR 1 -#define ZYNQMP_SIP_SVC_GET_API_VERSION 0xC2000001 - -#define ZYNQMP_PM_VERSION_MAJOR 1 -#define ZYNQMP_PM_VERSION_MINOR 0 -#define ZYNQMP_PM_VERSION_MAJOR_SHIFT 16 -#define ZYNQMP_PM_VERSION_MINOR_MASK 0xFFFF - -#define ZYNQMP_PM_VERSION \ - ((ZYNQMP_PM_VERSION_MAJOR << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | \ - ZYNQMP_PM_VERSION_MINOR) - -#define ZYNQMP_PM_VERSION_INVALID ~0 - -#define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0) - enum { IDCODE, VERSION, @@ -54,12 +38,16 @@ enum { TCM_SPLIT, }; +struct zynqmp_ipi_msg { + size_t len; + u32 *buf; +}; + int zynq_board_read_rom_ethaddr(unsigned char *ethaddr); unsigned int zynqmp_get_silicon_version(void); void handoff_setup(void); -unsigned int zynqmp_pmufw_version(void); int zynqmp_mmio_write(const u32 address, const u32 mask, const u32 value); int zynqmp_mmio_read(const u32 address, u32 *value); int invoke_smc(u32 pm_api_id, u32 arg0, u32 arg1, u32 arg2, u32 arg3, @@ -72,6 +60,4 @@ int chip_id(unsigned char id); void tcm_init(u8 mode); #endif -void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); - #endif /* _ASM_ARCH_SYS_PROTO_H */ diff --git a/arch/arm/mach-zynqmp/pmu_ipc.c b/arch/arm/mach-zynqmp/pmu_ipc.c deleted file mode 100644 index d8858ea3ff..0000000000 --- a/arch/arm/mach-zynqmp/pmu_ipc.c +++ /dev/null @@ -1,112 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Inter-Processor Communication with the Platform Management Unit (PMU) - * firmware. - * - * (C) Copyright 2019 Luca Ceresoli - * Luca Ceresoli <luca@lucaceresoli.net> - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/arch/sys_proto.h> - -/* IPI bitmasks, register base and register offsets */ -#define IPI_BIT_MASK_APU 0x00001 -#define IPI_BIT_MASK_PMU0 0x10000 -#define IPI_REG_BASE_APU 0xFF300000 -#define IPI_REG_BASE_PMU0 0xFF330000 -#define IPI_REG_OFFSET_TRIG 0x00 -#define IPI_REG_OFFSET_OBR 0x04 - -/* IPI mailbox buffer offsets */ -#define IPI_BUF_BASE_APU 0xFF990400 -#define IPI_BUF_OFFSET_TARGET_PMU 0x1C0 -#define IPI_BUF_OFFSET_REQ 0x00 -#define IPI_BUF_OFFSET_RESP 0x20 - -#define PMUFW_PAYLOAD_ARG_CNT 8 - -/* PMUFW commands */ -#define PMUFW_CMD_SET_CONFIGURATION 2 - -static void pmu_ipc_send_request(const u32 *req, size_t req_len) -{ - u32 *mbx = (u32 *)(IPI_BUF_BASE_APU + - IPI_BUF_OFFSET_TARGET_PMU + - IPI_BUF_OFFSET_REQ); - size_t i; - - for (i = 0; i < req_len; i++) - writel(req[i], &mbx[i]); -} - -static void pmu_ipc_read_response(unsigned int *value, size_t count) -{ - u32 *mbx = (u32 *)(IPI_BUF_BASE_APU + - IPI_BUF_OFFSET_TARGET_PMU + - IPI_BUF_OFFSET_RESP); - size_t i; - - for (i = 0; i < count; i++) - value[i] = readl(&mbx[i]); -} - -/** - * Send request to PMU and get the response. - * - * @req: Request buffer. Byte 0 is the API ID, other bytes are optional - * parameters. - * @req_len: Request length in number of 32-bit words. - * @res: Response buffer. Byte 0 is the error code, other bytes are - * optional parameters. Optional, if @res_maxlen==0 the parameters - * will not be read. - * @res_maxlen: Space allocated for the response in number of 32-bit words. - * - * @return Error code returned by the PMU (i.e. the first word of the response) - */ -static int pmu_ipc_request(const u32 *req, size_t req_len, - u32 *res, size_t res_maxlen) -{ - u32 status; - - if (req_len > PMUFW_PAYLOAD_ARG_CNT || - res_maxlen > PMUFW_PAYLOAD_ARG_CNT) - return -EINVAL; - - pmu_ipc_send_request(req, req_len); - - /* Raise Inter-Processor Interrupt to PMU and wait for response */ - writel(IPI_BIT_MASK_PMU0, IPI_REG_BASE_APU + IPI_REG_OFFSET_TRIG); - do { - status = readl(IPI_REG_BASE_APU + IPI_REG_OFFSET_OBR); - } while (status & IPI_BIT_MASK_PMU0); - - pmu_ipc_read_response(res, res_maxlen); - - return 0; -} - -/** - * Send a configuration object to the PMU firmware. - * - * @cfg_obj: Pointer to the configuration object - * @size: Size of @cfg_obj in bytes - */ -void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) -{ - const u32 request[] = { - PMUFW_CMD_SET_CONFIGURATION, - (u32)((u64)cfg_obj) - }; - u32 response; - int err; - - printf("Loading PMUFW cfg obj (%ld bytes)\n", size); - - err = pmu_ipc_request(request, ARRAY_SIZE(request), &response, 1); - if (err) - panic("Cannot load PMUFW configuration object (%d)\n", err); - if (response != 0) - panic("PMUFW returned 0x%08x status!\n", response); -} diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 5cc68d63c4..5ce8261451 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -20,6 +20,14 @@ config TARGET_MICROBLAZE_GENERIC endchoice +config STACK_SIZE + hex "Define max stack size that can be used by u-boot" + default 0x200000 + help + Defines Max stack size that can be used by u-boot so that the + initrd_high will be calculated as base stack pointer minus this + stack size. + source "board/xilinx/microblaze-generic/Kconfig" config SPL_LDSCRIPT diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index 45966eef91..1124272915 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -6,8 +6,12 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_LMB + #ifndef CONFIG_SPL_BUILD #define CONFIG_NEEDS_MANUAL_RELOC #endif +#define CONFIG_SYS_BOOT_RAMDISK_HIGH + #endif diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c index ec332944d8..11e534715d 100644 --- a/arch/microblaze/lib/bootm.c +++ b/arch/microblaze/lib/bootm.c @@ -15,71 +15,111 @@ #include <u-boot/zlib.h> #include <asm/byteorder.h> -int do_bootm_linux(int flag, int argc, char * const argv[], - bootm_headers_t *images) +DECLARE_GLOBAL_DATA_PTR; + +static ulong get_sp(void) +{ + ulong ret; + + asm("addik %0, r1, 0" : "=r"(ret) : ); + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) { - /* First parameter is mapped to $r5 for kernel boot args */ - void (*thekernel) (char *, ulong, ulong); - char *commandline = env_get("bootargs"); - ulong rd_data_start, rd_data_end; + ulong sp, bank_end; + int bank; /* - * allow the PREP bootm subcommand, it is required for bootm to work + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. */ - if (flag & BOOTM_STATE_OS_PREP) - return 0; + sp = get_sp(); + debug("## Current stack ends at 0x%08lx ", sp); - if ((flag != 0) && (flag != BOOTM_STATE_OS_GO)) - return 1; - - int ret; + /* adjust sp by 4K to be safe */ + sp -= 4096; + for (bank = 0; bank < CONFIG_NR_DRAM_BANKS; bank++) { + if (sp < gd->bd->bi_dram[bank].start) + continue; + bank_end = gd->bd->bi_dram[bank].start + + gd->bd->bi_dram[bank].size; + if (sp >= bank_end) + continue; + lmb_reserve(lmb, sp, bank_end - sp); + break; + } +} - char *of_flat_tree = NULL; -#if defined(CONFIG_OF_LIBFDT) - /* did generic code already find a device tree? */ - if (images->ft_len) - of_flat_tree = images->ft_addr; -#endif +static void boot_jump_linux(bootm_headers_t *images, int flag) +{ + void (*thekernel)(char *cmdline, ulong rd, ulong dt); + ulong dt = (ulong)images->ft_addr; + ulong rd_start = images->initrd_start; + ulong cmdline = images->cmdline_start; + int fake = (flag & BOOTM_STATE_OS_FAKE_GO); thekernel = (void (*)(char *, ulong, ulong))images->ep; - /* find ramdisk */ - ret = boot_get_ramdisk(argc, argv, images, IH_ARCH_MICROBLAZE, - &rd_data_start, &rd_data_end); - if (ret) - return 1; - - bootstage_mark(BOOTSTAGE_ID_RUN_OS); - - if (!of_flat_tree && argc > 1) - of_flat_tree = (char *)simple_strtoul(argv[1], NULL, 16); - - /* fixup the initrd now that we know where it should be */ - if (images->rd_start && images->rd_end && of_flat_tree) { - ret = fdt_initrd(of_flat_tree, images->rd_start, - images->rd_end); - if (ret) - return 1; - } - #ifdef DEBUG printf("## Transferring control to Linux (at address 0x%08lx) ", (ulong)thekernel); - printf("ramdisk 0x%08lx, FDT 0x%08lx...\n", - rd_data_start, (ulong) of_flat_tree); + printf("cmdline 0x%08lx, ramdisk 0x%08lx, FDT 0x%08lx...\n", + cmdline, rd_start, dt); #endif #ifdef XILINX_USE_DCACHE flush_cache(0, XILINX_DCACHE_BYTE_SIZE); #endif - /* - * Linux Kernel Parameters (passing device tree): - * r5: pointer to command line - * r6: pointer to ramdisk - * r7: pointer to the fdt, followed by the board info data - */ - thekernel(commandline, rd_data_start, (ulong)of_flat_tree); - /* does not return */ + if (!fake) { + /* + * Linux Kernel Parameters (passing device tree): + * r5: pointer to command line + * r6: pointer to ramdisk + * r7: pointer to the fdt, followed by the board info data + */ + thekernel((char *)cmdline, rd_start, dt); + /* does not return */ + } +} + +static void boot_prep_linux(bootm_headers_t *images) +{ + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { + printf("using: FDT\n"); + if (image_setup_linux(images)) { + printf("FDT creation failed! hanging..."); + hang(); + } + } +} + +int do_bootm_linux(int flag, int argc, char * const argv[], + bootm_headers_t *images) +{ + images->cmdline_start = (ulong)env_get("bootargs"); + + /* cmdline init is the part of 'prep' and nothing to do for 'bdt' */ + if (flag & BOOTM_STATE_OS_BD_T || flag & BOOTM_STATE_OS_CMDLINE) + return -1; + + if (flag & BOOTM_STATE_OS_PREP) { + boot_prep_linux(images); + return 0; + } + + if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) { + boot_jump_linux(images, flag); + return 0; + } + + boot_prep_linux(images); + boot_jump_linux(images, flag); return 1; } diff --git a/board/xilinx/Kconfig b/board/xilinx/Kconfig index 37bec5fae2..cb272eafda 100644 --- a/board/xilinx/Kconfig +++ b/board/xilinx/Kconfig @@ -39,3 +39,11 @@ config XILINX_PS_INIT_FILE before the build. endif + +config XILINX_OF_BOARD_DTB_ADDR + hex + default 0x1000 if ARCH_VERSAL + default 0x100000 if ARCH_ZYNQ || ARCH_ZYNQMP + depends on OF_BOARD + help + Offset in the memory where the board configuration DTB is placed. diff --git a/board/xilinx/bootscripts/qspiboot.cmd b/board/xilinx/bootscripts/qspiboot.cmd new file mode 100644 index 0000000000..c10341c4d6 --- /dev/null +++ b/board/xilinx/bootscripts/qspiboot.cmd @@ -0,0 +1,10 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# This example only target for qspi boot, sameway it can be created for boot +# devices like nand. +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d qspiboot.cmd boot.scr +# +# It requires a list of environment variables to be defined before load: +# fdt_addr, fdt_offset, fdt_size, kernel_addr, kernel_offset, kernel_size +# +sf probe 0 0 0 && sf read $fdt_addr $fdt_offset $fdt_size && sf read $kernel_addr $kernel_offset $kernel_size && booti $kernel_addr - $fdt_addr diff --git a/board/xilinx/bootscripts/sdboot.cmd b/board/xilinx/bootscripts/sdboot.cmd new file mode 100644 index 0000000000..0031900db0 --- /dev/null +++ b/board/xilinx/bootscripts/sdboot.cmd @@ -0,0 +1,10 @@ +# This is an example file to generate boot.scr - a boot script for U-Boot +# This example only target for qspi boot, sameway it can be created for boot +# devices like nand. +# Generate boot.scr: +# ./tools/mkimage -c none -A arm -T script -d sdboot.cmd boot.scr +# +# It requires a list of environment variables used below to be defined +# before load +# +mmc dev $devnum && mmcinfo && run uenvboot || run sdroot$devnum;load mmc $devnum:$partid $fdt_addr system.dtb && load mmc $devnum:$partid $kernel_addr Image && booti $kernel_addr - $fdt_addr diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 7e6340bad6..1c28263cb8 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -36,3 +36,17 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) return ret; } + +#if defined(CONFIG_OF_BOARD) +void *board_fdt_blob_setup(void) +{ + static void *fw_dtb = (void *)CONFIG_XILINX_OF_BOARD_DTB_ADDR; + + if (fdt_magic(fw_dtb) != FDT_MAGIC) { + printf("DTB is not passed via %p\n", fw_dtb); + return NULL; + } + + return fw_dtb; +} +#endif diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index ba82292e35..7e784d1078 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -12,20 +12,12 @@ #include <common.h> #include <config.h> -#include <dm.h> #include <dm/lists.h> #include <fdtdec.h> -#include <asm/processor.h> -#include <asm/microblaze_intc.h> -#include <asm/asm.h> -#include <asm/gpio.h> -#include <dm/uclass.h> -#include <wdt.h> +#include <linux/sizes.h> DECLARE_GLOBAL_DATA_PTR; -ulong ram_base; - int dram_init_banksize(void) { return fdtdec_setup_memory_banksize(); @@ -41,6 +33,8 @@ int dram_init(void) int board_late_init(void) { + ulong max_size, lowmem_size; + #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_SYSRESET_MICROBLAZE) int ret; @@ -49,5 +43,21 @@ int board_late_init(void) if (ret) printf("Warning: No reset driver: ret=%d\n", ret); #endif + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + max_size = gd->start_addr_sp - CONFIG_STACK_SIZE; + max_size = round_down(max_size, SZ_16M); + + /* Linux default LOWMEM_SIZE is 0x30000000 = 768MB */ + lowmem_size = gd->ram_base + 768 * 1024 * 1024; + + env_set_addr("initrd_high", (void *)min_t(ulong, max_size, + lowmem_size)); + env_set_addr("fdt_high", (void *)min_t(ulong, max_size, lowmem_size)); + return 0; } diff --git a/board/xilinx/versal/Makefile b/board/xilinx/versal/Makefile index 2b812765ee..e9307d7fa6 100644 --- a/board/xilinx/versal/Makefile +++ b/board/xilinx/versal/Makefile @@ -5,3 +5,4 @@ # obj-y := board.o +obj-y += ../common/board.o diff --git a/board/xilinx/versal/board.c b/board/xilinx/versal/board.c index 90751477b5..abdd580c01 100644 --- a/board/xilinx/versal/board.c +++ b/board/xilinx/versal/board.c @@ -9,13 +9,27 @@ #include <malloc.h> #include <asm/io.h> #include <asm/arch/hardware.h> +#include <asm/arch/sys_proto.h> +#include <dm/device.h> +#include <dm/uclass.h> +#include <versalpl.h> +#include <linux/sizes.h> DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_FPGA_VERSALPL) +static xilinx_desc versalpl = XILINX_VERSAL_DESC; +#endif + int board_init(void) { printf("EL Level:\tEL%d\n", current_el()); +#if defined(CONFIG_FPGA_VERSALPL) + fpga_init(); + fpga_add(fpga_xilinx, &versalpl); +#endif + return 0; } @@ -65,9 +79,133 @@ int board_early_init_r(void) return 0; } +int board_late_init(void) +{ + u32 reg = 0; + u8 bootmode; + struct udevice *dev; + int bootseq = -1; + int bootseq_len = 0; + int env_targets_len = 0; + const char *mode; + char *new_targets; + char *env_targets; + ulong initrd_hi; + + if (!(gd->flags & GD_FLG_ENV_DEFAULT)) { + debug("Saved variables - Skipping\n"); + return 0; + } + + reg = readl(&crp_base->boot_mode_usr); + + if (reg >> BOOT_MODE_ALT_SHIFT) + reg >>= BOOT_MODE_ALT_SHIFT; + + bootmode = reg & BOOT_MODES_MASK; + + puts("Bootmode: "); + switch (bootmode) { + case USB_MODE: + puts("USB_MODE\n"); + mode = "dfu_usb"; + break; + case JTAG_MODE: + puts("JTAG_MODE\n"); + mode = "jtag pxe dhcp"; + break; + case QSPI_MODE_24BIT: + puts("QSPI_MODE_24\n"); + mode = "xspi0"; + break; + case QSPI_MODE_32BIT: + puts("QSPI_MODE_32\n"); + mode = "xspi0"; + break; + case OSPI_MODE: + puts("OSPI_MODE\n"); + mode = "xspi0"; + break; + case EMMC_MODE: + puts("EMMC_MODE\n"); + mode = "mmc0"; + break; + case SD_MODE: + puts("SD_MODE\n"); + if (uclass_get_device_by_name(UCLASS_MMC, + "sdhci@f1040000", &dev)) { + puts("Boot from SD0 but without SD0 enabled!\n"); + return -1; + } + debug("mmc0 device found at %p, seq %d\n", dev, dev->seq); + + mode = "mmc"; + bootseq = dev->seq; + break; + case SD1_LSHFT_MODE: + puts("LVL_SHFT_"); + /* fall through */ + case SD_MODE1: + puts("SD_MODE1\n"); + if (uclass_get_device_by_name(UCLASS_MMC, + "sdhci@f1050000", &dev)) { + puts("Boot from SD1 but without SD1 enabled!\n"); + return -1; + } + debug("mmc1 device found at %p, seq %d\n", dev, dev->seq); + + mode = "mmc"; + bootseq = dev->seq; + break; + default: + mode = ""; + printf("Invalid Boot Mode:0x%x\n", bootmode); + break; + } + + if (bootseq >= 0) { + bootseq_len = snprintf(NULL, 0, "%i", bootseq); + debug("Bootseq len: %x\n", bootseq_len); + } + + /* + * One terminating char + one byte for space between mode + * and default boot_targets + */ + env_targets = env_get("boot_targets"); + if (env_targets) + env_targets_len = strlen(env_targets); + + new_targets = calloc(1, strlen(mode) + env_targets_len + 2 + + bootseq_len); + if (!new_targets) + return -ENOMEM; + + if (bootseq >= 0) + sprintf(new_targets, "%s%x %s", mode, bootseq, + env_targets ? env_targets : ""); + else + sprintf(new_targets, "%s %s", mode, + env_targets ? env_targets : ""); + + env_set("boot_targets", new_targets); + + initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE; + initrd_hi = round_down(initrd_hi, SZ_16M); + env_set_addr("initrd_high", (void *)initrd_hi); + + return 0; +} + int dram_init_banksize(void) { - fdtdec_setup_memory_banksize(); + int ret; + + ret = fdtdec_setup_memory_banksize(); + if (ret) + return ret; + + mem_map_fill(); return 0; } diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 35191b2f81..7cfe69db69 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -52,7 +52,7 @@ int board_late_init(void) env_set("modeboot", "norboot"); break; case ZYNQ_BM_SD: - mode = "mmc"; + mode = "mmc0"; env_set("modeboot", "sdboot"); break; case ZYNQ_BM_JTAG: diff --git a/board/xilinx/zynqmp/cmds.c b/board/xilinx/zynqmp/cmds.c index ed7ba58c64..f53a1b63be 100644 --- a/board/xilinx/zynqmp/cmds.c +++ b/board/xilinx/zynqmp/cmds.c @@ -7,6 +7,7 @@ #include <common.h> #include <env.h> #include <malloc.h> +#include <zynqmp_firmware.h> #include <asm/arch/hardware.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> diff --git a/board/xilinx/zynqmp/zynqmp-a2197-g-revA b/board/xilinx/zynqmp/zynqmp-a2197-g-revA new file mode 120000 index 0000000000..a64c140b86 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-g-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA
\ No newline at end of file diff --git a/board/xilinx/zynqmp/zynqmp-a2197-m-revA b/board/xilinx/zynqmp/zynqmp-a2197-m-revA new file mode 120000 index 0000000000..a64c140b86 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-m-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA
\ No newline at end of file diff --git a/board/xilinx/zynqmp/zynqmp-a2197-p-revA b/board/xilinx/zynqmp/zynqmp-a2197-p-revA new file mode 120000 index 0000000000..a64c140b86 --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-p-revA @@ -0,0 +1 @@ +zynqmp-a2197-revA
\ No newline at end of file diff --git a/board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c b/board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c new file mode 100644 index 0000000000..ac4a073e1b --- /dev/null +++ b/board/xilinx/zynqmp/zynqmp-a2197-revA/psu_init_gpl.c @@ -0,0 +1,1171 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (c) Copyright 2015 Xilinx, Inc. All rights reserved. + */ + +#include <asm/arch/psu_init_gpl.h> +#include <xil_io.h> + +static unsigned long psu_pll_init_data(void) +{ + psu_mask_write(0xFF5E0034, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFF5E0030, 0x00717F00U, 0x00014000U); + psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000008U); + psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E0030, 0x00000001U, 0x00000000U); + mask_poll(0xFF5E0040, 0x00000002U); + psu_mask_write(0xFF5E0030, 0x00000008U, 0x00000000U); + psu_mask_write(0xFF5E0048, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFF5E0038, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012300U); + psu_mask_write(0xFF5E0024, 0xFE7FEDEFU, 0x7E4B0C82U); + psu_mask_write(0xFF5E0020, 0x00717F00U, 0x00015A00U); + psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000008U); + psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E0020, 0x00000001U, 0x00000000U); + mask_poll(0xFF5E0040, 0x00000001U); + psu_mask_write(0xFF5E0020, 0x00000008U, 0x00000000U); + psu_mask_write(0xFF5E0044, 0x00003F00U, 0x00000300U); + psu_mask_write(0xFF5E0028, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A0024, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFD1A0020, 0x00717F00U, 0x00014800U); + psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD1A0020, 0x00000001U, 0x00000000U); + mask_poll(0xFD1A0044, 0x00000001U); + psu_mask_write(0xFD1A0020, 0x00000008U, 0x00000000U); + psu_mask_write(0xFD1A0048, 0x00003F00U, 0x00000300U); + psu_mask_write(0xFD1A0028, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A0030, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFD1A002C, 0x00717F00U, 0x00014000U); + psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD1A002C, 0x00000001U, 0x00000000U); + mask_poll(0xFD1A0044, 0x00000002U); + psu_mask_write(0xFD1A002C, 0x00000008U, 0x00000000U); + psu_mask_write(0xFD1A004C, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFD1A0034, 0x8000FFFFU, 0x00000000U); + psu_mask_write(0xFD1A003C, 0xFE7FEDEFU, 0x7E4B0C62U); + psu_mask_write(0xFD1A0038, 0x00717F00U, 0x00014000U); + psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD1A0038, 0x00000001U, 0x00000000U); + mask_poll(0xFD1A0044, 0x00000004U); + psu_mask_write(0xFD1A0038, 0x00000008U, 0x00000000U); + psu_mask_write(0xFD1A0050, 0x00003F00U, 0x00000200U); + psu_mask_write(0xFD1A0040, 0x8000FFFFU, 0x00000000U); + + return 1; +} + +static unsigned long psu_clock_init_data(void) +{ + psu_mask_write(0xFF5E0050, 0x063F3F07U, 0x06010C00U); + psu_mask_write(0xFF180360, 0x00000003U, 0x00000001U); + psu_mask_write(0xFF180308, 0x00000006U, 0x00000006U); + psu_mask_write(0xFF5E0100, 0x013F3F07U, 0x01010600U); + psu_mask_write(0xFF5E0060, 0x023F3F07U, 0x02010600U); + psu_mask_write(0xFF5E0064, 0x023F3F07U, 0x02010600U); + psu_mask_write(0xFF5E004C, 0x023F3F07U, 0x02031900U); + psu_mask_write(0xFF5E006C, 0x013F3F07U, 0x01010800U); + psu_mask_write(0xFF5E0070, 0x013F3F07U, 0x01010800U); + psu_mask_write(0xFF18030C, 0x00020003U, 0x00000000U); + psu_mask_write(0xFF5E0074, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0078, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0120, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0124, 0x013F3F07U, 0x01010F00U); + psu_mask_write(0xFF5E0090, 0x01003F07U, 0x01000302U); + psu_mask_write(0xFF5E009C, 0x01003F07U, 0x01000400U); + psu_mask_write(0xFF5E00A4, 0x01003F07U, 0x01000800U); + psu_mask_write(0xFF5E00A8, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFF5E00AC, 0x01003F07U, 0x01000F02U); + psu_mask_write(0xFF5E00B0, 0x01003F07U, 0x01000602U); + psu_mask_write(0xFF5E00B8, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFF5E00C0, 0x013F3F07U, 0x01010B02U); + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01011E02U); + psu_mask_write(0xFF5E0104, 0x00000007U, 0x00000000U); + psu_mask_write(0xFF5E0128, 0x01003F07U, 0x01000104U); + psu_mask_write(0xFD1A0060, 0x03003F07U, 0x03000100U); + psu_mask_write(0xFD1A0068, 0x01003F07U, 0x01000200U); + psu_mask_write(0xFD1A0080, 0x00003F07U, 0x00000200U); + psu_mask_write(0xFD1A0084, 0x07003F07U, 0x07000100U); + psu_mask_write(0xFD1A00B8, 0x01003F07U, 0x01000203U); + psu_mask_write(0xFD1A00BC, 0x01003F07U, 0x01000203U); + psu_mask_write(0xFD1A00C0, 0x01003F07U, 0x01000202U); + psu_mask_write(0xFD1A00C4, 0x01003F07U, 0x01000502U); + psu_mask_write(0xFD1A00F8, 0x00003F07U, 0x00000200U); + psu_mask_write(0xFF180380, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD610100, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF180300, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF410050, 0x00000001U, 0x00000000U); + + return 1; +} + +static unsigned long psu_ddr_init_data(void) +{ + psu_mask_write(0xFD1A0108, 0x00000008U, 0x00000008U); + psu_mask_write(0xFD070000, 0xE30FBE3DU, 0xC1081020U); + psu_mask_write(0xFD070010, 0x8000F03FU, 0x00000030U); + psu_mask_write(0xFD070020, 0x000003F3U, 0x00000202U); + psu_mask_write(0xFD070024, 0xFFFFFFFFU, 0x00516120U); + psu_mask_write(0xFD070030, 0x0000007FU, 0x00000008U); + psu_mask_write(0xFD070034, 0x00FFFF1FU, 0x00408410U); + psu_mask_write(0xFD070050, 0x00F1F1F4U, 0x00210000U); + psu_mask_write(0xFD070054, 0x0FFF0FFFU, 0x00000000U); + psu_mask_write(0xFD070060, 0x00000073U, 0x00000001U); + psu_mask_write(0xFD070064, 0x0FFF83FFU, 0x00418096U); + psu_mask_write(0xFD070070, 0x00000017U, 0x00000010U); + psu_mask_write(0xFD070074, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD0700C4, 0x3F000391U, 0x10000200U); + psu_mask_write(0xFD0700C8, 0x01FF1F3FU, 0x0030051FU); + psu_mask_write(0xFD0700D0, 0xC3FF0FFFU, 0x00030413U); + psu_mask_write(0xFD0700D4, 0x01FF7F0FU, 0x006A0000U); + psu_mask_write(0xFD0700D8, 0x0000FF0FU, 0x00002305U); + psu_mask_write(0xFD0700DC, 0xFFFFFFFFU, 0x00440024U); + psu_mask_write(0xFD0700E0, 0xFFFFFFFFU, 0x00310008U); + psu_mask_write(0xFD0700E4, 0x00FF03FFU, 0x00210004U); + psu_mask_write(0xFD0700E8, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD0700EC, 0xFFFF0000U, 0x00000000U); + psu_mask_write(0xFD0700F0, 0x0000003FU, 0x00000010U); + psu_mask_write(0xFD0700F4, 0x00000FFFU, 0x0000077FU); + psu_mask_write(0xFD070100, 0x7F3F7F3FU, 0x15161117U); + psu_mask_write(0xFD070104, 0x001F1F7FU, 0x00040422U); + psu_mask_write(0xFD070108, 0x3F3F3F3FU, 0x060C1310U); + psu_mask_write(0xFD07010C, 0x3FF3F3FFU, 0x00F08000U); + psu_mask_write(0xFD070110, 0x1F0F0F1FU, 0x0A04060CU); + psu_mask_write(0xFD070114, 0x0F0F3F1FU, 0x01040808U); + psu_mask_write(0xFD070118, 0x0F0F000FU, 0x01010005U); + psu_mask_write(0xFD07011C, 0x00000F0FU, 0x00000401U); + psu_mask_write(0xFD070120, 0x7F7F7F7FU, 0x04040606U); + psu_mask_write(0xFD070124, 0x40070F3FU, 0x0004040DU); + psu_mask_write(0xFD07012C, 0x7F1F031FU, 0x440C011CU); + psu_mask_write(0xFD070130, 0x00030F1FU, 0x00020608U); + psu_mask_write(0xFD070180, 0xF7FF03FFU, 0x82160010U); + psu_mask_write(0xFD070184, 0x3FFFFFFFU, 0x01B65B96U); + psu_mask_write(0xFD070190, 0x1FBFBF3FU, 0x0495820AU); + psu_mask_write(0xFD070194, 0xF31F0F0FU, 0x00030304U); + psu_mask_write(0xFD070198, 0x0FF1F1F1U, 0x07000101U); + psu_mask_write(0xFD07019C, 0x000000F1U, 0x00000021U); + psu_mask_write(0xFD0701A0, 0xC3FF03FFU, 0x83FF0003U); + psu_mask_write(0xFD0701A4, 0x00FF00FFU, 0x00C800FFU); + psu_mask_write(0xFD0701B0, 0x00000007U, 0x00000004U); + psu_mask_write(0xFD0701B4, 0x00003F3FU, 0x00001308U); + psu_mask_write(0xFD0701C0, 0x00000007U, 0x00000001U); + psu_mask_write(0xFD070200, 0x0000001FU, 0x0000001FU); + psu_mask_write(0xFD070204, 0x001F1F1FU, 0x00070707U); + psu_mask_write(0xFD070208, 0x0F0F0F0FU, 0x00000000U); + psu_mask_write(0xFD07020C, 0x0F0F0F0FU, 0x0F000000U); + psu_mask_write(0xFD070210, 0x00000F0FU, 0x00000F0FU); + psu_mask_write(0xFD070214, 0x0F0F0F0FU, 0x060F0606U); + psu_mask_write(0xFD070218, 0x8F0F0F0FU, 0x06060606U); + psu_mask_write(0xFD07021C, 0x00000F0FU, 0x00000F0FU); + psu_mask_write(0xFD070220, 0x00001F1FU, 0x00000000U); + psu_mask_write(0xFD070224, 0x0F0F0F0FU, 0x06060606U); + psu_mask_write(0xFD070228, 0x0F0F0F0FU, 0x06060606U); + psu_mask_write(0xFD07022C, 0x0000000FU, 0x00000006U); + psu_mask_write(0xFD070240, 0x0F1F0F7CU, 0x04000400U); + psu_mask_write(0xFD070244, 0x00003333U, 0x00000000U); + psu_mask_write(0xFD070250, 0x7FFF3F07U, 0x01002001U); + psu_mask_write(0xFD070264, 0xFF00FFFFU, 0x08000040U); + psu_mask_write(0xFD07026C, 0xFF00FFFFU, 0x08000040U); + psu_mask_write(0xFD070280, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD070284, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD070288, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD07028C, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD070290, 0x0000FFFFU, 0x00000000U); + psu_mask_write(0xFD070294, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070300, 0x00000011U, 0x00000000U); + psu_mask_write(0xFD07030C, 0x80000033U, 0x00000000U); + psu_mask_write(0xFD070320, 0x00000001U, 0x00000000U); + psu_mask_write(0xFD070400, 0x00000111U, 0x00000001U); + psu_mask_write(0xFD070404, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070408, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070490, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070494, 0x0033000FU, 0x0020000BU); + psu_mask_write(0xFD070498, 0x07FF07FFU, 0x00000000U); + psu_mask_write(0xFD0704B4, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0704B8, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070540, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070544, 0x03330F0FU, 0x02000B03U); + psu_mask_write(0xFD070548, 0x07FF07FFU, 0x00000000U); + psu_mask_write(0xFD070564, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070568, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0705F0, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD0705F4, 0x03330F0FU, 0x02000B03U); + psu_mask_write(0xFD0705F8, 0x07FF07FFU, 0x00000000U); + psu_mask_write(0xFD070614, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070618, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0706A0, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD0706A4, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD0706A8, 0x07FF07FFU, 0x0000004FU); + psu_mask_write(0xFD0706AC, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD0706B0, 0x000007FFU, 0x0000004FU); + psu_mask_write(0xFD0706C4, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD0706C8, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070750, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070754, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070758, 0x07FF07FFU, 0x0000004FU); + psu_mask_write(0xFD07075C, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070760, 0x000007FFU, 0x0000004FU); + psu_mask_write(0xFD070774, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070778, 0x000073FFU, 0x0000200FU); + psu_mask_write(0xFD070800, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD070804, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070808, 0x07FF07FFU, 0x0000004FU); + psu_mask_write(0xFD07080C, 0x0033000FU, 0x00100003U); + psu_mask_write(0xFD070810, 0x000007FFU, 0x0000004FU); + psu_mask_write(0xFD070F04, 0x000001FFU, 0x00000000U); + psu_mask_write(0xFD070F08, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD070F0C, 0x000001FFU, 0x00000010U); + psu_mask_write(0xFD070F10, 0x000000FFU, 0x0000000FU); + psu_mask_write(0xFD072190, 0x1FBFBF3FU, 0x07828002U); + psu_mask_write(0xFD1A0108, 0x0000000CU, 0x00000000U); + psu_mask_write(0xFD080010, 0xFFFFFFFFU, 0x87001E00U); + psu_mask_write(0xFD080018, 0xFFFFFFFFU, 0x00F07E38U); + psu_mask_write(0xFD08001C, 0xFFFFFFFFU, 0x55AA5480U); + psu_mask_write(0xFD080024, 0xFFFFFFFFU, 0x010100F4U); + psu_mask_write(0xFD080040, 0xFFFFFFFFU, 0x42C21590U); + psu_mask_write(0xFD080044, 0xFFFFFFFFU, 0xD05512C0U); + psu_mask_write(0xFD080068, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD080090, 0xFFFFFFFFU, 0x02A04161U); + psu_mask_write(0xFD0800C0, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD0800C4, 0xFFFFFFFFU, 0x000000DDU); + psu_mask_write(0xFD080100, 0xFFFFFFFFU, 0x0000040DU); + psu_mask_write(0xFD080110, 0xFFFFFFFFU, 0x0B2E1708U); + psu_mask_write(0xFD080114, 0xFFFFFFFFU, 0x282B0510U); + psu_mask_write(0xFD080118, 0xFFFFFFFFU, 0x000F0133U); + psu_mask_write(0xFD08011C, 0xFFFFFFFFU, 0x82000501U); + psu_mask_write(0xFD080120, 0xFFFFFFFFU, 0x012B2B0BU); + psu_mask_write(0xFD080124, 0xFFFFFFFFU, 0x0044260BU); + psu_mask_write(0xFD080128, 0xFFFFFFFFU, 0x00000C18U); + psu_mask_write(0xFD080140, 0xFFFFFFFFU, 0x08400020U); + psu_mask_write(0xFD080144, 0xFFFFFFFFU, 0x00000C80U); + psu_mask_write(0xFD080150, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080154, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080180, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080184, 0xFFFFFFFFU, 0x00000044U); + psu_mask_write(0xFD080188, 0xFFFFFFFFU, 0x00000024U); + psu_mask_write(0xFD08018C, 0xFFFFFFFFU, 0x00000031U); + psu_mask_write(0xFD080190, 0xFFFFFFFFU, 0x00000008U); + psu_mask_write(0xFD080194, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080198, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD0801AC, 0xFFFFFFFFU, 0x00000056U); + psu_mask_write(0xFD0801B0, 0xFFFFFFFFU, 0x00000021U); + psu_mask_write(0xFD0801B4, 0xFFFFFFFFU, 0x00000008U); + psu_mask_write(0xFD0801B8, 0xFFFFFFFFU, 0x00000019U); + psu_mask_write(0xFD0801D8, 0xFFFFFFFFU, 0x00000016U); + psu_mask_write(0xFD080200, 0xFFFFFFFFU, 0x800091C7U); + psu_mask_write(0xFD080204, 0xFFFFFFFFU, 0x00010236U); + psu_mask_write(0xFD080240, 0xFFFFFFFFU, 0x00141054U); + psu_mask_write(0xFD080250, 0xFFFFFFFFU, 0x00088000U); + psu_mask_write(0xFD080414, 0xFFFFFFFFU, 0x12340800U); + psu_mask_write(0xFD0804F4, 0xFFFFFFFFU, 0x0000000AU); + psu_mask_write(0xFD080500, 0xFFFFFFFFU, 0x30000028U); + psu_mask_write(0xFD080508, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD08050C, 0xFFFFFFFFU, 0x00000005U); + psu_mask_write(0xFD080510, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080520, 0xFFFFFFFFU, 0x0300BD99U); + psu_mask_write(0xFD080528, 0xFFFFFFFFU, 0xF1032019U); + psu_mask_write(0xFD08052C, 0xFFFFFFFFU, 0x07F001E3U); + psu_mask_write(0xFD080544, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080548, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080558, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD08055C, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080560, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080564, 0xFFFFFFFFU, 0x00000000U); + psu_mask_write(0xFD080680, 0xFFFFFFFFU, 0x008AAC58U); + psu_mask_write(0xFD080684, 0xFFFFFFFFU, 0x0001B39BU); + psu_mask_write(0xFD080694, 0xFFFFFFFFU, 0x01E10210U); + psu_mask_write(0xFD080698, 0xFFFFFFFFU, 0x01E10000U); + psu_mask_write(0xFD0806A4, 0xFFFFFFFFU, 0x0001BB9BU); + psu_mask_write(0xFD080700, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080704, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD08070C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080710, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080714, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080718, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080800, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080804, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD08080C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080810, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080814, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080818, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080900, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080904, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD08090C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080910, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080914, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080918, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080A00, 0xFFFFFFFFU, 0x40800604U); + psu_mask_write(0xFD080A04, 0xFFFFFFFFU, 0x00007FFFU); + psu_mask_write(0xFD080A0C, 0xFFFFFFFFU, 0x3F000008U); + psu_mask_write(0xFD080A10, 0xFFFFFFFFU, 0x0E00F50CU); + psu_mask_write(0xFD080A14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080A18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080B00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080B04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080B08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080B0C, 0xFFFFFFFFU, 0x0129A4A4U); + psu_mask_write(0xFD080B10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080B14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080B18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080C00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080C04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080C08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080C0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080C10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080C14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080C18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080D00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080D04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080D08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080D0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080D10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080D14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080D18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080E00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080E04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080E08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080E0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080E10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080E14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080E18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD080F00, 0xFFFFFFFFU, 0x80803660U); + psu_mask_write(0xFD080F04, 0xFFFFFFFFU, 0x55556000U); + psu_mask_write(0xFD080F08, 0xFFFFFFFFU, 0xAAAAAAAAU); + psu_mask_write(0xFD080F0C, 0xFFFFFFFFU, 0x0029A4A4U); + psu_mask_write(0xFD080F10, 0xFFFFFFFFU, 0x0C00BD00U); + psu_mask_write(0xFD080F14, 0xFFFFFFFFU, 0x09091616U); + psu_mask_write(0xFD080F18, 0xFFFFFFFFU, 0x09092B2BU); + psu_mask_write(0xFD081400, 0xFFFFFFFFU, 0x2A019FFEU); + psu_mask_write(0xFD081404, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD08141C, 0xFFFFFFFFU, 0x01264300U); + psu_mask_write(0xFD08142C, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD081430, 0xFFFFFFFFU, 0x71000000U); + psu_mask_write(0xFD081440, 0xFFFFFFFFU, 0x2A019FFEU); + psu_mask_write(0xFD081444, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD08145C, 0xFFFFFFFFU, 0x01264300U); + psu_mask_write(0xFD08146C, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD081470, 0xFFFFFFFFU, 0x71000000U); + psu_mask_write(0xFD081480, 0xFFFFFFFFU, 0x15019FFEU); + psu_mask_write(0xFD081484, 0xFFFFFFFFU, 0x21100000U); + psu_mask_write(0xFD08149C, 0xFFFFFFFFU, 0x01266300U); + psu_mask_write(0xFD0814AC, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD0814B0, 0xFFFFFFFFU, 0x70400000U); + psu_mask_write(0xFD0814C0, 0xFFFFFFFFU, 0x15019FFEU); + psu_mask_write(0xFD0814C4, 0xFFFFFFFFU, 0x21100000U); + psu_mask_write(0xFD0814DC, 0xFFFFFFFFU, 0x01266300U); + psu_mask_write(0xFD0814EC, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD0814F0, 0xFFFFFFFFU, 0x70400000U); + psu_mask_write(0xFD081500, 0xFFFFFFFFU, 0x15019FFEU); + psu_mask_write(0xFD081504, 0xFFFFFFFFU, 0x21100000U); + psu_mask_write(0xFD08151C, 0xFFFFFFFFU, 0x01266300U); + psu_mask_write(0xFD08152C, 0xFFFFFFFFU, 0x000C1800U); + psu_mask_write(0xFD081530, 0xFFFFFFFFU, 0x70400000U); + psu_mask_write(0xFD0817C4, 0xFFFFFFFFU, 0x01100000U); + psu_mask_write(0xFD0817DC, 0xFFFFFFFFU, 0x012643C4U); + + return 1; +} + +static unsigned long psu_ddr_qos_init_data(void) +{ + return 1; +} + +static unsigned long psu_mio_init_data(void) +{ + psu_mask_write(0xFF180034, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180038, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF18003C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180040, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180044, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180048, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF18004C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180050, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180054, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180058, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF18005C, 0x000000FEU, 0x00000008U); + psu_mask_write(0xFF180088, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF18008C, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF180090, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF180094, 0x000000FEU, 0x00000040U); + psu_mask_write(0xFF180098, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF18009C, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF1800A0, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF1800A4, 0x000000FEU, 0x000000C0U); + psu_mask_write(0xFF1800B4, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800B8, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800BC, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800C0, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800C4, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800C8, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800CC, 0x000000FEU, 0x00000010U); + psu_mask_write(0xFF1800D0, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800D4, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800D8, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800DC, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800E0, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800E4, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800E8, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800EC, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800F0, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800F4, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800F8, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF1800FC, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180100, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180104, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180108, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF18010C, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180110, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180114, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180118, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF18011C, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180120, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180124, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180128, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF18012C, 0x000000FEU, 0x00000004U); + psu_mask_write(0xFF180130, 0x000000FEU, 0x00000060U); + psu_mask_write(0xFF180134, 0x000000FEU, 0x00000060U); + psu_mask_write(0xFF180204, 0x00FFE000U, 0x00000000U); + psu_mask_write(0xFF180208, 0xFFFFE3FCU, 0x00B02240U); + psu_mask_write(0xFF18020C, 0x00003FFFU, 0x0000000BU); + psu_mask_write(0xFF180138, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18013C, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180140, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180144, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180148, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18014C, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180154, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180158, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF18015C, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180160, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180164, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180168, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180170, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180174, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180178, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF18017C, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180180, 0x03FFFFFFU, 0x03FFFFFFU); + psu_mask_write(0xFF180184, 0x03FFFFFFU, 0x00000000U); + psu_mask_write(0xFF180200, 0x0000000FU, 0x00000000U); + + return 1; +} + +static unsigned long psu_peripherals_pre_init_data(void) +{ + psu_mask_write(0xFF5E0108, 0x013F3F07U, 0x01012302U); + + return 1; +} + +static unsigned long psu_peripherals_init_data(void) +{ + psu_mask_write(0xFD1A0100, 0x0000007CU, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x001A0000U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x0093C018U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000C00U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000060U, 0x00000000U); + psu_mask_write(0xFF180310, 0x00008001U, 0x00000001U); + psu_mask_write(0xFF180320, 0x33843384U, 0x00801284U); + psu_mask_write(0xFF18031C, 0x00007FFEU, 0x00006450U); + psu_mask_write(0xFF180358, 0x00080000U, 0x00080000U); + psu_mask_write(0xFF18031C, 0x7FFE0000U, 0x64500000U); + psu_mask_write(0xFF180358, 0x00000008U, 0x00000008U); + psu_mask_write(0xFF180324, 0x000003C0U, 0x00000000U); + psu_mask_write(0xFF180324, 0x03C00000U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000600U, 0x00000000U); + psu_mask_write(0xFF5E0238, 0x00000006U, 0x00000000U); + psu_mask_write(0xFF000034, 0x000000FFU, 0x00000005U); + psu_mask_write(0xFF000018, 0x0000FFFFU, 0x0000008FU); + psu_mask_write(0xFF000000, 0x000001FFU, 0x00000017U); + psu_mask_write(0xFF000004, 0x000003FFU, 0x00000020U); + psu_mask_write(0xFF010034, 0x000000FFU, 0x00000005U); + psu_mask_write(0xFF010018, 0x0000FFFFU, 0x0000008FU); + psu_mask_write(0xFF010000, 0x000001FFU, 0x00000017U); + psu_mask_write(0xFF010004, 0x000003FFU, 0x00000020U); + psu_mask_write(0xFF5E0238, 0x00040000U, 0x00000000U); + psu_mask_write(0xFF4B0024, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFFCA5000, 0x00001FFFU, 0x00000000U); + psu_mask_write(0xFD5C0060, 0x000F000FU, 0x00000000U); + psu_mask_write(0xFFA60040, 0x80000000U, 0x80000000U); + psu_mask_write(0xFF260020, 0xFFFFFFFFU, 0x01FC9F08U); + psu_mask_write(0xFF260000, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + + mask_delay(1); + psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000002U); + + mask_delay(5); + psu_mask_write(0xFF5E0250, 0x00000F0FU, 0x00000202U); + + return 1; +} + +static unsigned long psu_serdes_init_data(void) +{ + psu_mask_write(0xFD410000, 0x0000001FU, 0x0000000FU); + psu_mask_write(0xFD410004, 0x0000001FU, 0x00000008U); + psu_mask_write(0xFD402860, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD402864, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD406094, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD406368, 0x000000FFU, 0x00000038U); + psu_mask_write(0xFD40636C, 0x00000007U, 0x00000003U); + psu_mask_write(0xFD406370, 0x000000FFU, 0x000000F4U); + psu_mask_write(0xFD406374, 0x000000FFU, 0x00000031U); + psu_mask_write(0xFD406378, 0x000000FFU, 0x00000002U); + psu_mask_write(0xFD40637C, 0x00000033U, 0x00000030U); + psu_mask_write(0xFD40106C, 0x0000000FU, 0x0000000FU); + psu_mask_write(0xFD4000F4, 0x0000000BU, 0x0000000BU); + psu_mask_write(0xFD40506C, 0x00000003U, 0x00000003U); + psu_mask_write(0xFD4040F4, 0x00000003U, 0x00000003U); + psu_mask_write(0xFD4050CC, 0x00000020U, 0x00000020U); + psu_mask_write(0xFD401074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD405074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD409074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40D074, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40189C, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD4018F8, 0x000000FFU, 0x0000007DU); + psu_mask_write(0xFD4018FC, 0x000000FFU, 0x0000007DU); + psu_mask_write(0xFD401990, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD401924, 0x000000FFU, 0x00000082U); + psu_mask_write(0xFD401928, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD401900, 0x000000FFU, 0x00000064U); + psu_mask_write(0xFD40192C, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD401980, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401914, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401918, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD401940, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401944, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD401994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40589C, 0x00000080U, 0x00000080U); + psu_mask_write(0xFD4058F8, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD4058FC, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD405990, 0x000000FFU, 0x00000010U); + psu_mask_write(0xFD405924, 0x000000FFU, 0x000000FEU); + psu_mask_write(0xFD405928, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD405900, 0x000000FFU, 0x0000001AU); + psu_mask_write(0xFD40592C, 0x000000FFU, 0x00000000U); + psu_mask_write(0xFD405980, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD405914, 0x000000FFU, 0x000000F7U); + psu_mask_write(0xFD405918, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD405940, 0x000000FFU, 0x000000F7U); + psu_mask_write(0xFD405944, 0x00000001U, 0x00000001U); + psu_mask_write(0xFD405994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD409994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40D994, 0x00000007U, 0x00000007U); + psu_mask_write(0xFD40107C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40507C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40907C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD40D07C, 0x0000000FU, 0x00000001U); + psu_mask_write(0xFD4019A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD401038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40102C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4059A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD405038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40502C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4099A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD409038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40902C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40D9A4, 0x000000FFU, 0x000000FFU); + psu_mask_write(0xFD40D038, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD40D02C, 0x00000040U, 0x00000040U); + psu_mask_write(0xFD4019AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD4059AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD4099AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD40D9AC, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD401978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD405978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD409978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD40D978, 0x00000010U, 0x00000010U); + psu_mask_write(0xFD410010, 0x00000077U, 0x00000035U); + psu_mask_write(0xFD410040, 0x00000003U, 0x00000000U); + psu_mask_write(0xFD410044, 0x00000003U, 0x00000000U); + + return 1; +} + +static unsigned long psu_resetout_init_data(void) +{ + psu_mask_write(0xFF5E023C, 0x00000400U, 0x00000000U); + psu_mask_write(0xFF9D0080, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF9D007C, 0x00000001U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000140U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00000800U, 0x00000000U); + psu_mask_write(0xFF9E0080, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF9E007C, 0x00000001U, 0x00000001U); + psu_mask_write(0xFF5E023C, 0x00000280U, 0x00000000U); + psu_mask_write(0xFF5E0230, 0x00000001U, 0x00000000U); + psu_mask_write(0xFE20C200, 0x00023FFFU, 0x00022457U); + psu_mask_write(0xFE20C630, 0x003FFF00U, 0x00000000U); + psu_mask_write(0xFE20C11C, 0x00000600U, 0x00000600U); + psu_mask_write(0xFE20C12C, 0x00004000U, 0x00004000U); + psu_mask_write(0xFE30C200, 0x00023FFFU, 0x00022457U); + psu_mask_write(0xFE30C630, 0x003FFF00U, 0x00000000U); + psu_mask_write(0xFE30C12C, 0x00004000U, 0x00004000U); + psu_mask_write(0xFE30C11C, 0x00000400U, 0x00000400U); + psu_mask_write(0xFD480064, 0x00000200U, 0x00000200U); + mask_poll(0xFD4023E4, 0x00000010U); + mask_poll(0xFD4063E4, 0x00000010U); + + return 1; +} + +static unsigned long psu_resetin_init_data(void) +{ + psu_mask_write(0xFF5E023C, 0x00000540U, 0x00000540U); + psu_mask_write(0xFF5E023C, 0x00000A80U, 0x00000A80U); + psu_mask_write(0xFF5E0230, 0x00000001U, 0x00000001U); + + return 1; +} + +static unsigned long psu_afi_config(void) +{ + psu_mask_write(0xFD1A0100, 0x00001F80U, 0x00000000U); + psu_mask_write(0xFF5E023C, 0x00080000U, 0x00000000U); + psu_mask_write(0xFF419000, 0x00000300U, 0x00000000U); + + return 1; +} + +static void dpll_prog(int ddr_pll_fbdiv, int d_lock_dly, int d_lock_cnt, + int d_lfhf, int d_cp, int d_res) +{ + unsigned int pll_ctrl_regval; + unsigned int pll_status_regval; + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00010000U); + pll_ctrl_regval = pll_ctrl_regval | (1 << 16); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0xFE000000U); + pll_ctrl_regval = pll_ctrl_regval | (d_lock_dly << 25); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x007FE000U); + pll_ctrl_regval = pll_ctrl_regval | (d_lock_cnt << 13); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000C00U); + pll_ctrl_regval = pll_ctrl_regval | (d_lfhf << 10); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x000001E0U); + pll_ctrl_regval = pll_ctrl_regval | (d_cp << 5); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x00000030)); + pll_ctrl_regval = pll_ctrl_regval & (~0x0000000FU); + pll_ctrl_regval = pll_ctrl_regval | (d_res << 0); + Xil_Out32(((0xFD1A0000U) + 0x00000030), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00007F00U); + pll_ctrl_regval = pll_ctrl_regval | (ddr_pll_fbdiv << 8); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000008U); + pll_ctrl_regval = pll_ctrl_regval | (1 << 3); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000001U); + pll_ctrl_regval = pll_ctrl_regval | (1 << 0); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000001U); + pll_ctrl_regval = pll_ctrl_regval | (0 << 0); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); + + pll_status_regval = 0x00000000; + while ((pll_status_regval & 0x00000002U) != 0x00000002U) + pll_status_regval = Xil_In32(((0xFD1A0000U) + 0x00000044)); + + pll_ctrl_regval = Xil_In32(((0xFD1A0000U) + 0x0000002C)); + pll_ctrl_regval = pll_ctrl_regval & (~0x00000008U); + pll_ctrl_regval = pll_ctrl_regval | (0 << 3); + Xil_Out32(((0xFD1A0000U) + 0x0000002C), pll_ctrl_regval); +} + +static unsigned long psu_ddr_phybringup_data(void) +{ + unsigned int regval = 0; + + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + int cur_PLLCR0; + + cur_PLLCR0 = (Xil_In32(0xFD080068U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL0PLLCR0; + + cur_DX8SL0PLLCR0 = (Xil_In32(0xFD081404U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL1PLLCR0; + + cur_DX8SL1PLLCR0 = (Xil_In32(0xFD081444U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL2PLLCR0; + + cur_DX8SL2PLLCR0 = (Xil_In32(0xFD081484U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL3PLLCR0; + + cur_DX8SL3PLLCR0 = (Xil_In32(0xFD0814C4U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SL4PLLCR0; + + cur_DX8SL4PLLCR0 = (Xil_In32(0xFD081504U) & 0xFFFFFFFFU) >> 0x00000000U; + int cur_DX8SLBPLLCR0; + + cur_DX8SLBPLLCR0 = (Xil_In32(0xFD0817C4U) & 0xFFFFFFFFU) >> 0x00000000U; + Xil_Out32(0xFD080068, 0x02120000); + Xil_Out32(0xFD081404, 0x02120000); + Xil_Out32(0xFD081444, 0x02120000); + Xil_Out32(0xFD081484, 0x02120000); + Xil_Out32(0xFD0814C4, 0x02120000); + Xil_Out32(0xFD081504, 0x02120000); + Xil_Out32(0xFD0817C4, 0x02120000); + int cur_fbdiv; + + cur_fbdiv = (Xil_In32(0xFD1A002CU) & 0x00007F00U) >> 0x00000008U; + dpll_prog(48, 63, 625, 3, 3, 2); + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + unsigned int pll_retry = 10; + unsigned int pll_locked = 0; + + while ((pll_retry > 0) && (!pll_locked)) { + Xil_Out32(0xFD080004, 0x00040010); + Xil_Out32(0xFD080004, 0x00040011); + + while ((Xil_In32(0xFD080030) & 0x1) != 1) + ; + pll_locked = (Xil_In32(0xFD080030) & 0x80000000) + >> 31; + pll_locked &= (Xil_In32(0xFD0807E0) & 0x10000) + >> 16; + pll_locked &= (Xil_In32(0xFD0809E0) & 0x10000) + >> 16; + pll_retry--; + } + Xil_Out32(0xFD0800C4, Xil_In32(0xFD0800C4) | (pll_retry << 16)); + if (!pll_locked) + return (0); + + Xil_Out32(0xFD080004U, 0x00040063U); + + while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU) + ; + prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); + + while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU) + ; + Xil_Out32(0xFD070010U, 0x80000018U); + Xil_Out32(0xFD0701B0U, 0x00000005U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000331U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000B36U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000C21U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00000E19U); + Xil_Out32(0xFD070010U, 0x80000018U); + regval = Xil_In32(0xFD070018); + while ((regval & 0x1) != 0x0) + regval = Xil_In32(0xFD070018); + + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + regval = Xil_In32(0xFD070018); + Xil_Out32(0xFD070014U, 0x00001616U); + Xil_Out32(0xFD070010U, 0x80000018U); + Xil_Out32(0xFD070010U, 0x80000010U); + Xil_Out32(0xFD0701B0U, 0x00000005U); + Xil_Out32(0xFD070320U, 0x00000001U); + while ((Xil_In32(0xFD070004U) & 0x0000000FU) != 0x00000001U) + ; + prog_reg(0xFD0701B0U, 0x00000001U, 0x00000000U, 0x00000000U); + prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U); + prog_reg(0xFD080028U, 0x00000001U, 0x00000000U, 0x00000001U); + prog_reg(0xFD080004U, 0x20000000U, 0x0000001DU, 0x00000001U); + prog_reg(0xFD08016CU, 0x00000004U, 0x00000002U, 0x00000001U); + prog_reg(0xFD080168U, 0x000000F0U, 0x00000004U, 0x00000007U); + prog_reg(0xFD080168U, 0x00000F00U, 0x00000008U, 0x00000002U); + prog_reg(0xFD080168U, 0x0000000FU, 0x00000000U, 0x00000001U); + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + + Xil_Out32(0xFD080068, cur_PLLCR0); + Xil_Out32(0xFD081404, cur_DX8SL0PLLCR0); + Xil_Out32(0xFD081444, cur_DX8SL1PLLCR0); + Xil_Out32(0xFD081484, cur_DX8SL2PLLCR0); + Xil_Out32(0xFD0814C4, cur_DX8SL3PLLCR0); + Xil_Out32(0xFD081504, cur_DX8SL4PLLCR0); + Xil_Out32(0xFD0817C4, cur_DX8SLBPLLCR0); + for (int tp = 0; tp < 20; tp++) + regval = Xil_In32(0xFD070018); + + dpll_prog(cur_fbdiv, 63, 625, 3, 3, 2); + for (int tp = 0; tp < 2000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080004U, 0x20000000U, 0x0000001DU, 0x00000000U); + prog_reg(0xFD080004U, 0x00040000U, 0x00000012U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000040U, 0x00000006U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000020U, 0x00000005U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000010U, 0x00000004U, 0x00000001U); + prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); + + while ((Xil_In32(0xFD080030U) & 0x0000000FU) != 0x0000000FU) + ; + prog_reg(0xFD080004U, 0x00000001U, 0x00000000U, 0x00000001U); + + while ((Xil_In32(0xFD080030U) & 0x000000FFU) != 0x0000001FU) + ; + for (int tp = 0; tp < 2000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080028U, 0x00000001U, 0x00000000U, 0x00000000U); + prog_reg(0xFD08016CU, 0x00000004U, 0x00000002U, 0x00000001U); + prog_reg(0xFD080168U, 0x000000F0U, 0x00000004U, 0x00000007U); + prog_reg(0xFD080168U, 0x00000F00U, 0x00000008U, 0x00000003U); + prog_reg(0xFD080168U, 0x0000000FU, 0x00000000U, 0x00000001U); + for (int tp = 0; tp < 2000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000001U); + Xil_Out32(0xFD080004, 0x0014FE01); + + regval = Xil_In32(0xFD080030); + while (regval != 0x8000007E) + regval = Xil_In32(0xFD080030); + + Xil_Out32(0xFD080200U, 0x000091C7U); + regval = Xil_In32(0xFD080030); + while (regval != 0x80008FFF) + regval = Xil_In32(0xFD080030); + + Xil_Out32(0xFD080200U, 0x800091C7U); + regval = ((Xil_In32(0xFD080030) & 0x1FFF0000) >> 18); + if (regval != 0) + return (0); + + Xil_Out32(0xFD080200U, 0x800091C7U); + int cur_R006_tREFPRD; + + cur_R006_tREFPRD = (Xil_In32(0xFD080018U) & 0x0003FFFFU) >> 0x00000000U; + prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD); + + prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000003U); + prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000003U); + prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000003U); + + Xil_Out32(0xFD080004, 0x00060001); + regval = Xil_In32(0xFD080030); + while ((regval & 0x80004001) != 0x80004001) + regval = Xil_In32(0xFD080030); + + prog_reg(0xFD08001CU, 0x00000018U, 0x00000003U, 0x00000000U); + prog_reg(0xFD08142CU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD08146CU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD0814ACU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD0814ECU, 0x00000030U, 0x00000004U, 0x00000000U); + prog_reg(0xFD08152CU, 0x00000030U, 0x00000004U, 0x00000000U); + + Xil_Out32(0xFD080200U, 0x800091C7U); + prog_reg(0xFD080018, 0x3FFFF, 0x0, cur_R006_tREFPRD); + + Xil_Out32(0xFD080004, 0x0000C001); + regval = Xil_In32(0xFD080030); + while ((regval & 0x80000C01) != 0x80000C01) + regval = Xil_In32(0xFD080030); + + prog_reg(0xFD070320U, 0x00000001U, 0x00000000U, 0x00000000U); + prog_reg(0xFD0701B0U, 0x00000001U, 0x00000000U, 0x00000001U); + prog_reg(0xFD0701A0U, 0x80000000U, 0x0000001FU, 0x00000000U); + prog_reg(0xFD070320U, 0x00000001U, 0x00000000U, 0x00000001U); + Xil_Out32(0xFD070180U, 0x02160010U); + Xil_Out32(0xFD070060U, 0x00000000U); + prog_reg(0xFD080014U, 0x00000040U, 0x00000006U, 0x00000000U); + for (int tp = 0; tp < 4000; tp++) + regval = Xil_In32(0xFD070018); + + prog_reg(0xFD080090U, 0x00000FC0U, 0x00000006U, 0x00000007U); + prog_reg(0xFD080090U, 0x00000004U, 0x00000002U, 0x00000001U); + prog_reg(0xFD08070CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD08080CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD08090CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD080A0CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD080F0CU, 0x02000000U, 0x00000019U, 0x00000000U); + prog_reg(0xFD080200U, 0x00000010U, 0x00000004U, 0x00000001U); + prog_reg(0xFD080250U, 0x00000002U, 0x00000001U, 0x00000000U); + prog_reg(0xFD080250U, 0x0000000CU, 0x00000002U, 0x00000001U); + prog_reg(0xFD080250U, 0x000000F0U, 0x00000004U, 0x00000000U); + prog_reg(0xFD080250U, 0x00300000U, 0x00000014U, 0x00000001U); + prog_reg(0xFD080250U, 0xF0000000U, 0x0000001CU, 0x00000002U); + prog_reg(0xFD08070CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD08080CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD08090CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080A0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080B0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080C0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080D0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080E0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080F0CU, 0x08000000U, 0x0000001BU, 0x00000000U); + prog_reg(0xFD080254U, 0x000000FFU, 0x00000000U, 0x00000001U); + prog_reg(0xFD080254U, 0x000F0000U, 0x00000010U, 0x0000000AU); + prog_reg(0xFD080250U, 0x00000001U, 0x00000000U, 0x00000001U); + + return 1; +} + +static int serdes_enb_coarse_saturation(void) +{ + Xil_Out32(0xFD402094, 0x00000010); + Xil_Out32(0xFD406094, 0x00000010); + Xil_Out32(0xFD40A094, 0x00000010); + Xil_Out32(0xFD40E094, 0x00000010); + return 1; +} + +static int serdes_fixcal_code(void) +{ + int maskstatus = 1; + unsigned int rdata = 0; + unsigned int match_pmos_code[23]; + unsigned int match_nmos_code[23]; + unsigned int match_ical_code[7]; + unsigned int match_rcal_code[7]; + unsigned int p_code = 0; + unsigned int n_code = 0; + unsigned int i_code = 0; + unsigned int r_code = 0; + unsigned int repeat_count = 0; + unsigned int L3_TM_CALIB_DIG20 = 0; + unsigned int L3_TM_CALIB_DIG19 = 0; + unsigned int L3_TM_CALIB_DIG18 = 0; + unsigned int L3_TM_CALIB_DIG16 = 0; + unsigned int L3_TM_CALIB_DIG15 = 0; + unsigned int L3_TM_CALIB_DIG14 = 0; + int i = 0, count = 0; + + rdata = Xil_In32(0xFD40289C); + rdata = rdata & ~0x03; + rdata = rdata | 0x1; + Xil_Out32(0xFD40289C, rdata); + + do { + if (count == 1100000) + break; + rdata = Xil_In32(0xFD402B1C); + count++; + } while ((rdata & 0x0000000E) != 0x0000000E); + + for (i = 0; i < 23; i++) { + match_pmos_code[i] = 0; + match_nmos_code[i] = 0; + } + for (i = 0; i < 7; i++) { + match_ical_code[i] = 0; + match_rcal_code[i] = 0; + } + + do { + Xil_Out32(0xFD410010, 0x00000000); + Xil_Out32(0xFD410014, 0x00000000); + + Xil_Out32(0xFD410010, 0x00000001); + Xil_Out32(0xFD410014, 0x00000000); + + maskstatus = mask_poll(0xFD40EF14, 0x2); + if (maskstatus == 0) { + xil_printf("#SERDES initialization timed out\n\r"); + return maskstatus; + } + + p_code = mask_read(0xFD40EF18, 0xFFFFFFFF); + n_code = mask_read(0xFD40EF1C, 0xFFFFFFFF); + ; + i_code = mask_read(0xFD40EF24, 0xFFFFFFFF); + r_code = mask_read(0xFD40EF28, 0xFFFFFFFF); + ; + + if (p_code >= 0x26 && p_code <= 0x3C) + match_pmos_code[p_code - 0x26] += 1; + + if (n_code >= 0x26 && n_code <= 0x3C) + match_nmos_code[n_code - 0x26] += 1; + + if (i_code >= 0xC && i_code <= 0x12) + match_ical_code[i_code - 0xC] += 1; + + if (r_code >= 0x6 && r_code <= 0xC) + match_rcal_code[r_code - 0x6] += 1; + + } while (repeat_count++ < 10); + + for (i = 0; i < 23; i++) { + if (match_pmos_code[i] >= match_pmos_code[0]) { + match_pmos_code[0] = match_pmos_code[i]; + p_code = 0x26 + i; + } + if (match_nmos_code[i] >= match_nmos_code[0]) { + match_nmos_code[0] = match_nmos_code[i]; + n_code = 0x26 + i; + } + } + + for (i = 0; i < 7; i++) { + if (match_ical_code[i] >= match_ical_code[0]) { + match_ical_code[0] = match_ical_code[i]; + i_code = 0xC + i; + } + if (match_rcal_code[i] >= match_rcal_code[0]) { + match_rcal_code[0] = match_rcal_code[i]; + r_code = 0x6 + i; + } + } + + L3_TM_CALIB_DIG20 = mask_read(0xFD40EC50, 0xFFFFFFF0); + L3_TM_CALIB_DIG20 = L3_TM_CALIB_DIG20 | 0x8 | ((p_code >> 2) & 0x7); + + L3_TM_CALIB_DIG19 = mask_read(0xFD40EC4C, 0xFFFFFF18); + L3_TM_CALIB_DIG19 = L3_TM_CALIB_DIG19 | ((p_code & 0x3) << 6) + | 0x20 | 0x4 | ((n_code >> 3) & 0x3); + + L3_TM_CALIB_DIG18 = mask_read(0xFD40EC48, 0xFFFFFF0F); + L3_TM_CALIB_DIG18 = L3_TM_CALIB_DIG18 | ((n_code & 0x7) << 5) | 0x10; + + L3_TM_CALIB_DIG16 = mask_read(0xFD40EC40, 0xFFFFFFF8); + L3_TM_CALIB_DIG16 = L3_TM_CALIB_DIG16 | ((r_code >> 1) & 0x7); + + L3_TM_CALIB_DIG15 = mask_read(0xFD40EC3C, 0xFFFFFF30); + L3_TM_CALIB_DIG15 = L3_TM_CALIB_DIG15 | ((r_code & 0x1) << 7) + | 0x40 | 0x8 | ((i_code >> 1) & 0x7); + + L3_TM_CALIB_DIG14 = mask_read(0xFD40EC38, 0xFFFFFF3F); + L3_TM_CALIB_DIG14 = L3_TM_CALIB_DIG14 | ((i_code & 0x1) << 7) | 0x40; + + Xil_Out32(0xFD40EC50, L3_TM_CALIB_DIG20); + Xil_Out32(0xFD40EC4C, L3_TM_CALIB_DIG19); + Xil_Out32(0xFD40EC48, L3_TM_CALIB_DIG18); + Xil_Out32(0xFD40EC40, L3_TM_CALIB_DIG16); + Xil_Out32(0xFD40EC3C, L3_TM_CALIB_DIG15); + Xil_Out32(0xFD40EC38, L3_TM_CALIB_DIG14); + return maskstatus; +} + +static int init_serdes(void) +{ + int status = 1; + + status &= psu_resetin_init_data(); + + status &= serdes_fixcal_code(); + status &= serdes_enb_coarse_saturation(); + + status &= psu_serdes_init_data(); + status &= psu_resetout_init_data(); + + return status; +} + +static void init_peripheral(void) +{ + psu_mask_write(0xFD5F0018, 0x8000001FU, 0x8000001FU); +} + +int psu_init(void) +{ + int status = 1; + + status &= psu_mio_init_data(); + status &= psu_peripherals_pre_init_data(); + status &= psu_pll_init_data(); + status &= psu_clock_init_data(); + status &= psu_ddr_init_data(); + status &= psu_ddr_phybringup_data(); + status &= psu_peripherals_init_data(); + status &= init_serdes(); + init_peripheral(); + + status &= psu_afi_config(); + psu_ddr_qos_init_data(); + + if (status == 0) + return 1; + return 0; +} diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index d649daba96..b94936474d 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -21,7 +21,9 @@ #include <usb.h> #include <dwc3-uboot.h> #include <zynqmppl.h> +#include <zynqmp_firmware.h> #include <g_dnl.h> +#include <linux/sizes.h> #include "pm_cfg_obj.h" @@ -173,6 +175,14 @@ static const struct { .id = 0x66, .name = "39dr", }, + { + .id = 0x7b, + .name = "48dr", + }, + { + .id = 0x7e, + .name = "49dr", + }, }; #endif @@ -308,18 +318,6 @@ static char *zynqmp_get_silicon_idcode_name(void) int board_early_init_f(void) { int ret = 0; -#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_CLK_ZYNQMP) - u32 pm_api_version; - - pm_api_version = zynqmp_pmufw_version(); - printf("PMUFW:\tv%d.%d\n", - pm_api_version >> ZYNQMP_PM_VERSION_MAJOR_SHIFT, - pm_api_version & ZYNQMP_PM_VERSION_MINOR_MASK); - - if (pm_api_version < ZYNQMP_PM_VERSION) - panic("PMUFW version error. Expected: v%d.%d\n", - ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR); -#endif #if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED) ret = psu_init(); @@ -330,6 +328,12 @@ int board_early_init_f(void) int board_init(void) { + struct udevice *dev; + + uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev); + if (!dev) + panic("PMU Firmware device not found - Enable it"); + #if defined(CONFIG_SPL_BUILD) /* Check *at build time* if the filename is an non-empty string */ if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1) @@ -530,6 +534,7 @@ int board_late_init(void) char *new_targets; char *env_targets; int ret; + ulong initrd_hi; #if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD) usb_ether_init(); @@ -562,7 +567,7 @@ int board_late_init(void) break; case JTAG_MODE: puts("JTAG_MODE\n"); - mode = "pxe dhcp"; + mode = "jtag pxe dhcp"; env_set("modeboot", "jtagboot"); break; case QSPI_MODE_24BIT: @@ -647,6 +652,10 @@ int board_late_init(void) env_set("boot_targets", new_targets); + initrd_hi = gd->start_addr_sp - CONFIG_STACK_SIZE; + initrd_hi = round_down(initrd_hi, SZ_16M); + env_set_addr("initrd_high", (void *)initrd_hi); + reset_reason(); return 0; diff --git a/cmd/Kconfig b/cmd/Kconfig index 8e55b34c96..07060c63a7 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -48,6 +48,8 @@ config SYS_LONGHELP config SYS_PROMPT string "Shell prompt" + default "Zynq> " if ARCH_ZYNQ + default "ZynqMP> " if ARCH_ZYNQMP default "=> " help This string is displayed in the command line to the left of the diff --git a/common/image.c b/common/image.c index 62ba6b3bfe..f17fa40c49 100644 --- a/common/image.c +++ b/common/image.c @@ -583,7 +583,7 @@ ulong env_get_bootm_low(void) #if defined(CONFIG_SYS_SDRAM_BASE) return CONFIG_SYS_SDRAM_BASE; -#elif defined(CONFIG_ARM) +#elif defined(CONFIG_ARM) || defined(CONFIG_MICROBLAZE) return gd->bd->bi_dram[0].start; #else return 0; @@ -600,7 +600,8 @@ phys_size_t env_get_bootm_size(void) return tmp; } -#if defined(CONFIG_ARM) && defined(CONFIG_NR_DRAM_BANKS) +#if (defined(CONFIG_ARM) || defined(CONFIG_MICROBLAZE)) && \ + defined(CONFIG_NR_DRAM_BANKS) start = gd->bd->bi_dram[0].start; size = gd->bd->bi_dram[0].size; #else diff --git a/common/spl/Kconfig b/common/spl/Kconfig index 57d06ccece..92de9cd744 100644 --- a/common/spl/Kconfig +++ b/common/spl/Kconfig @@ -139,6 +139,7 @@ config SPL_TEXT_BASE default 0x10060 if MACH_SUN50I || MACH_SUN50I_H5 || MACH_SUN9I default 0x20060 if MACH_SUN50I_H6 default 0x00060 if ARCH_SUNXI + default 0xfffc0000 if ARCH_ZYNQMP default 0x0 help The address in memory that SPL will be running from. diff --git a/configs/avnet_ultra96_rev1_defconfig b/configs/avnet_ultra96_rev1_defconfig index feffcc0089..b5e61e621a 100644 --- a/configs/avnet_ultra96_rev1_defconfig +++ b/configs/avnet_ultra96_rev1_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000 CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_BIND=y diff --git a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig index 31e1bda428..b9bb0c9b11 100644 --- a/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig +++ b/configs/avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0_defconfig @@ -9,7 +9,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y CONFIG_SPL_SPI_SUPPORT=y CONFIG_SPL_ZYNQMP_TWO_SDHCI=y CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -17,7 +16,6 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_BOOTDELAY=0 # CONFIG_DISPLAY_CPUINFO is not set CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADP=y diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 94b9c78a6c..7d2859c5c3 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -37,10 +37,12 @@ CONFIG_CMD_DHCP=y CONFIG_CMD_TFTPPUT=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y CONFIG_CMD_JFFS2=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_EMBED=y CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" +CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_SPL_DM=y CONFIG_XILINX_GPIO=y diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig index 8b72983b23..6f89372ccf 100644 --- a/configs/syzygy_hub_defconfig +++ b/configs/syzygy_hub_defconfig @@ -19,7 +19,6 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/xilinx_versal_mini_defconfig b/configs/xilinx_versal_mini_defconfig index 012ba3ebbe..742aa1208a 100644 --- a/configs/xilinx_versal_mini_defconfig +++ b/configs/xilinx_versal_mini_defconfig @@ -8,8 +8,11 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_SYS_MALLOC_LEN=0x2000 CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_COUNTER_FREQUENCY=2720000 +# CONFIG_PSCI_RESET is not set +# CONFIG_EXPERT is not set # CONFIG_LEGACY_IMAGE_FORMAT is not set CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set diff --git a/configs/xilinx_versal_mini_emmc0_defconfig b/configs/xilinx_versal_mini_emmc0_defconfig index 440035f53b..7610abf4db 100644 --- a/configs/xilinx_versal_mini_emmc0_defconfig +++ b/configs/xilinx_versal_mini_emmc0_defconfig @@ -7,7 +7,10 @@ CONFIG_ENV_SIZE=0x80 CONFIG_NR_DRAM_BANKS=1 CONFIG_SYS_MALLOC_LEN=0x80000 CONFIG_COUNTER_FREQUENCY=2720000 +# CONFIG_PSCI_RESET is not set +# CONFIG_EXPERT is not set CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set @@ -49,4 +52,5 @@ CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc0" # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_FAT_WRITE=y # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_versal_mini_emmc1_defconfig b/configs/xilinx_versal_mini_emmc1_defconfig index 07ec6ebd66..ffc913a6eb 100644 --- a/configs/xilinx_versal_mini_emmc1_defconfig +++ b/configs/xilinx_versal_mini_emmc1_defconfig @@ -7,7 +7,10 @@ CONFIG_ENV_SIZE=0x80 CONFIG_NR_DRAM_BANKS=1 CONFIG_SYS_MALLOC_LEN=0x80000 CONFIG_COUNTER_FREQUENCY=2720000 +# CONFIG_PSCI_RESET is not set +# CONFIG_EXPERT is not set CONFIG_SYS_CONSOLE_INFO_QUIET=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set @@ -49,4 +52,5 @@ CONFIG_DEFAULT_DEVICE_TREE="versal-mini-emmc1" # CONFIG_DM_DEVICE_REMOVE is not set CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_FAT_WRITE=y # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig index 3b07545ac4..3ff23a2b2b 100644 --- a/configs/xilinx_versal_virt_defconfig +++ b/configs/xilinx_versal_virt_defconfig @@ -2,16 +2,14 @@ CONFIG_ARM=y CONFIG_ARCH_VERSAL=y CONFIG_SYS_TEXT_BASE=0x8000000 CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=0 CONFIG_COUNTER_FREQUENCY=62500000 -CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y # CONFIG_ARCH_FIXUP_FDT_MEMORY is not set CONFIG_BOOTDELAY=-1 CONFIG_SUPPORT_RAW_INITRD=y +# CONFIG_BOARD_LATE_INIT is not set # CONFIG_DISPLAY_CPUINFO is not set CONFIG_BOARD_EARLY_INIT_R=y CONFIG_HUSH_PARSER=y @@ -44,6 +42,7 @@ CONFIG_OF_BOARD=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_IP_DEFRAG=y CONFIG_TFTP_BLOCKSIZE=4096 +CONFIG_CLK_VERSAL=y CONFIG_DM_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y @@ -66,8 +65,6 @@ CONFIG_PHY_FIXED=y CONFIG_PHY_GIGE=y CONFIG_MII=y CONFIG_ZYNQ_GEM=y -CONFIG_DEBUG_UART_PL011=y -CONFIG_DEBUG_UART_ANNOUNCE=y CONFIG_PL01X_SERIAL=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/xilinx_zynqmp_a2197_g_revA_defconfig b/configs/xilinx_zynqmp_a2197_g_revA_defconfig new file mode 100644 index 0000000000..47a98c6d4d --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_g_revA_defconfig @@ -0,0 +1,115 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-g-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_m_revA_defconfig b/configs/xilinx_zynqmp_a2197_m_revA_defconfig new file mode 100644 index 0000000000..fb4020b2df --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_m_revA_defconfig @@ -0,0 +1,115 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-m-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_p_revA_defconfig b/configs/xilinx_zynqmp_a2197_p_revA_defconfig new file mode 100644 index 0000000000..d19c6b34ca --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_p_revA_defconfig @@ -0,0 +1,116 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_SPL_ZYNQMP_TWO_SDHCI=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-p-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_a2197_revA_defconfig b/configs/xilinx_zynqmp_a2197_revA_defconfig new file mode 100644 index 0000000000..3498483f4b --- /dev/null +++ b/configs/xilinx_zynqmp_a2197_revA_defconfig @@ -0,0 +1,117 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_DEBUG_UART_BASE=0xff000000 +CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_IDENT_STRING=" Xilinx ZynqMP SC for Versal" +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_DEBUG_UART=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynqmp-a2197-revA" +CONFIG_OF_LIST="zynqmp-a2197-revA zynqmp-a2197-g-revA zynqmp-a2197-p-revA zynqmp-a2197-m-revA" +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_PCA953X=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_BAR=y +CONFIG_SF_DUAL_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_DEBUG_UART_ZYNQ=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_SPL_GZIP=y +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_mini_defconfig b/configs/xilinx_zynqmp_mini_defconfig index 93fa7d8f6b..4b7fe5dd40 100644 --- a/configs/xilinx_zynqmp_mini_defconfig +++ b/configs/xilinx_zynqmp_mini_defconfig @@ -13,7 +13,6 @@ CONFIG_ZYNQMP_PSU_INIT_ENABLED=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set -CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/xilinx_zynqmp_mini_emmc0_defconfig b/configs/xilinx_zynqmp_mini_emmc0_defconfig index f15c0937bd..282e93f03c 100644 --- a/configs/xilinx_zynqmp_mini_emmc0_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc0_defconfig @@ -7,7 +7,6 @@ CONFIG_ENV_SIZE=0x80 CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y # CONFIG_CMD_ZYNQMP is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set @@ -15,7 +14,6 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/xilinx_zynqmp_mini_emmc1_defconfig b/configs/xilinx_zynqmp_mini_emmc1_defconfig index fb9a18263f..be70988698 100644 --- a/configs/xilinx_zynqmp_mini_emmc1_defconfig +++ b/configs/xilinx_zynqmp_mini_emmc1_defconfig @@ -7,7 +7,6 @@ CONFIG_ENV_SIZE=0x80 CONFIG_NR_DRAM_BANKS=1 CONFIG_SPL=y # CONFIG_CMD_ZYNQMP is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_FIT=y CONFIG_SUPPORT_RAW_INITRD=y # CONFIG_BOARD_LATE_INIT is not set @@ -15,7 +14,6 @@ CONFIG_SUPPORT_RAW_INITRD=y CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/xilinx_zynqmp_mini_nand_defconfig b/configs/xilinx_zynqmp_mini_nand_defconfig index 4be624813c..35776ab208 100644 --- a/configs/xilinx_zynqmp_mini_nand_defconfig +++ b/configs/xilinx_zynqmp_mini_nand_defconfig @@ -14,7 +14,6 @@ CONFIG_BOARD_EARLY_INIT_R=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set -CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set @@ -49,4 +48,5 @@ CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand" # CONFIG_MMC is not set CONFIG_NAND=y CONFIG_NAND_ARASAN=y +CONFIG_SYS_NAND_MAX_CHIPS=2 # CONFIG_EFI_LOADER is not set diff --git a/configs/xilinx_zynqmp_mini_qspi_defconfig b/configs/xilinx_zynqmp_mini_qspi_defconfig index bc63c08330..383f868625 100644 --- a/configs/xilinx_zynqmp_mini_qspi_defconfig +++ b/configs/xilinx_zynqmp_mini_qspi_defconfig @@ -10,7 +10,6 @@ CONFIG_SYS_MEM_RSVD_FOR_MMU=y CONFIG_ZYNQMP_NO_DDR=y # CONFIG_PSCI_RESET is not set # CONFIG_CMD_ZYNQMP is not set -CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_EXPERT is not set # CONFIG_LEGACY_IMAGE_FORMAT is not set # CONFIG_BOARD_LATE_INIT is not set @@ -18,7 +17,6 @@ CONFIG_SPL_TEXT_BASE=0xfffc0000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set -CONFIG_SYS_PROMPT="ZynqMP> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig new file mode 100644 index 0000000000..14eb06a405 --- /dev/null +++ b/configs/xilinx_zynqmp_virt_defconfig @@ -0,0 +1,108 @@ +CONFIG_ARM=y +CONFIG_ARCH_ZYNQMP=y +CONFIG_SYS_TEXT_BASE=0x8000000 +CONFIG_SYS_MALLOC_F_LEN=0x8000 +CONFIG_SPL=y +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y +CONFIG_ZYNQMP_USB=y +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_SPL_LOAD_FIT=y +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_BOARD_EARLY_INIT_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_RAM_SUPPORT=y +CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_ATF=y +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y +CONFIG_CMD_CLK=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_FPGA_LOAD_SECURE=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SDRAM=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_TIME=y +CONFIG_CMD_TIMER=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_OF_BOARD=y +CONFIG_ENV_IS_IN_FAT=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_SCSI_AHCI=y +CONFIG_SATA_CEVA=y +CONFIG_CLK_ZYNQMP=y +CONFIG_DFU_RAM=y +CONFIG_USB_FUNCTION_FASTBOOT=y +CONFIG_FASTBOOT_FLASH=y +CONFIG_FASTBOOT_FLASH_MMC_DEV=0 +CONFIG_FASTBOOT_CMD_OEM_FORMAT=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQMPPL=y +CONFIG_DM_GPIO=y +CONFIG_XILINX_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PCA954x=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0x20 +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_IO_VOLTAGE=y +CONFIG_MMC_UHS_SUPPORT=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set +CONFIG_PHY_MARVELL=y +CONFIG_PHY_NATSEMI=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_TI=y +CONFIG_PHY_VITESSE=y +CONFIG_PHY_FIXED=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_SCSI=y +CONFIG_DM_SCSI=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_SPI=y +CONFIG_ZYNQMP_GQSPI=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_XHCI_ZYNQMP=y +CONFIG_USB_DWC3=y +CONFIG_USB_DWC3_GADGET=y +CONFIG_USB_DWC3_GENERIC=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03FD +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_USB_FUNCTION_THOR=y +CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/configs/xilinx_zynqmp_zc1232_revA_defconfig b/configs/xilinx_zynqmp_zc1232_revA_defconfig index beb6d43812..255217df4b 100644 --- a/configs/xilinx_zynqmp_zc1232_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1232_revA_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 # CONFIG_SPL_FS_FAT is not set # CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y # CONFIG_CMD_FLASH is not set diff --git a/configs/xilinx_zynqmp_zc1254_revA_defconfig b/configs/xilinx_zynqmp_zc1254_revA_defconfig index 849a398edc..e058195842 100644 --- a/configs/xilinx_zynqmp_zc1254_revA_defconfig +++ b/configs/xilinx_zynqmp_zc1254_revA_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 # CONFIG_SPL_FS_FAT is not set # CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y # CONFIG_CMD_FLASH is not set diff --git a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig index a1e69b267f..bbf387a6b0 100644 --- a/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm015_dc1_defconfig @@ -9,7 +9,6 @@ CONFIG_ZYNQMP_USB=y CONFIG_SPL_ZYNQMP_TWO_SDHCI=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -20,7 +19,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig index 02f6d4a9bc..d5434eee85 100644 --- a/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm016_dc2_defconfig @@ -9,7 +9,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 # CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -20,7 +19,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y diff --git a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig index c243064112..4ff52292fb 100644 --- a/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm017_dc3_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y diff --git a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig index e964faba30..a5a7fc2aeb 100644 --- a/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm018_dc4_defconfig @@ -6,7 +6,6 @@ CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -17,7 +16,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y CONFIG_CMD_CLK=y diff --git a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig index 5856d9532d..5b8cf77085 100644 --- a/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig +++ b/configs/xilinx_zynqmp_zc1751_xm019_dc5_defconfig @@ -6,7 +6,6 @@ CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -17,7 +16,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y CONFIG_CMD_CLK=y diff --git a/configs/xilinx_zynqmp_zcu100_revC_defconfig b/configs/xilinx_zynqmp_zcu100_revC_defconfig index 1ec1bdc71a..fc917f0b5d 100644 --- a/configs/xilinx_zynqmp_zcu100_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu100_revC_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ZYNQ_SDHCI_MAX_FREQ=15000000 CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_BOOTMENU=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_BIND=y diff --git a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig index b27887e347..b64956d5f6 100644 --- a/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig +++ b/configs/xilinx_zynqmp_zcu102_rev1_0_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -21,7 +20,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y @@ -59,6 +57,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CADENCE=y diff --git a/configs/xilinx_zynqmp_zcu102_revA_defconfig b/configs/xilinx_zynqmp_zcu102_revA_defconfig index 7746305e6f..8b1a1ce0a2 100644 --- a/configs/xilinx_zynqmp_zcu102_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revA_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -21,7 +20,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y @@ -59,6 +57,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y diff --git a/configs/xilinx_zynqmp_zcu102_revB_defconfig b/configs/xilinx_zynqmp_zcu102_revB_defconfig index 3d58c01db6..2aab26dd3f 100644 --- a/configs/xilinx_zynqmp_zcu102_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu102_revB_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -21,7 +20,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_SYS_ALT_MEMTEST=y @@ -59,6 +57,7 @@ CONFIG_FASTBOOT_CMD_OEM_FORMAT=y CONFIG_FPGA_XILINX=y CONFIG_FPGA_ZYNQMPPL=y CONFIG_DM_GPIO=y +CONFIG_GPIO_HOG=y CONFIG_XILINX_GPIO=y CONFIG_DM_PCA953X=y CONFIG_DM_I2C=y diff --git a/configs/xilinx_zynqmp_zcu104_revA_defconfig b/configs/xilinx_zynqmp_zcu104_revA_defconfig index e21c34c63c..07e58b192a 100644 --- a/configs/xilinx_zynqmp_zcu104_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revA_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y diff --git a/configs/xilinx_zynqmp_zcu104_revC_defconfig b/configs/xilinx_zynqmp_zcu104_revC_defconfig index 3d66d0abae..4829df62b4 100644 --- a/configs/xilinx_zynqmp_zcu104_revC_defconfig +++ b/configs/xilinx_zynqmp_zcu104_revC_defconfig @@ -5,10 +5,11 @@ CONFIG_SYS_MALLOC_F_LEN=0x8000 CONFIG_SPL=y CONFIG_DEBUG_UART_BASE=0xff000000 CONFIG_DEBUG_UART_CLOCK=100000000 +CONFIG_SPL_SPI_FLASH_SUPPORT=y +CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -17,8 +18,8 @@ CONFIG_SPL_LOAD_FIT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y +CONFIG_SPL_SPI_LOAD=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y diff --git a/configs/xilinx_zynqmp_zcu106_revA_defconfig b/configs/xilinx_zynqmp_zcu106_revA_defconfig index 300d3b2220..72b3ce16a8 100644 --- a/configs/xilinx_zynqmp_zcu106_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu106_revA_defconfig @@ -10,7 +10,6 @@ CONFIG_SPL_SPI_SUPPORT=y CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -20,7 +19,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y diff --git a/configs/xilinx_zynqmp_zcu111_revA_defconfig b/configs/xilinx_zynqmp_zcu111_revA_defconfig index a4caaff6a1..de739ed3b5 100644 --- a/configs/xilinx_zynqmp_zcu111_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu111_revA_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 CONFIG_ZYNQMP_USB=y CONFIG_DEBUG_UART=y CONFIG_AHCI=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y CONFIG_CMD_DFU=y diff --git a/configs/xilinx_zynqmp_zcu1275_revA_defconfig b/configs/xilinx_zynqmp_zcu1275_revA_defconfig index 4790061b36..d86c5d1a76 100644 --- a/configs/xilinx_zynqmp_zcu1275_revA_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revA_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 # CONFIG_SPL_FS_FAT is not set # CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y # CONFIG_CMD_FLASH is not set diff --git a/configs/xilinx_zynqmp_zcu1275_revB_defconfig b/configs/xilinx_zynqmp_zcu1275_revB_defconfig index ce2aa24daa..957b883abd 100644 --- a/configs/xilinx_zynqmp_zcu1275_revB_defconfig +++ b/configs/xilinx_zynqmp_zcu1275_revB_defconfig @@ -8,7 +8,6 @@ CONFIG_DEBUG_UART_CLOCK=100000000 # CONFIG_SPL_FS_FAT is not set # CONFIG_SPL_LIBDISK_SUPPORT is not set CONFIG_DEBUG_UART=y -CONFIG_SPL_TEXT_BASE=0xfffc0000 CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_FIT_VERBOSE=y @@ -18,7 +17,6 @@ CONFIG_SPL_OS_BOOT=y CONFIG_SPL_RAM_SUPPORT=y CONFIG_SPL_RAM_DEVICE=y CONFIG_SPL_ATF=y -CONFIG_SYS_PROMPT="ZynqMP> " CONFIG_CMD_MEMTEST=y CONFIG_CMD_CLK=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_cc108_defconfig b/configs/zynq_cc108_defconfig index 9bfe5ce996..495c5df608 100644 --- a/configs/zynq_cc108_defconfig +++ b/configs/zynq_cc108_defconfig @@ -18,7 +18,6 @@ CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y diff --git a/configs/zynq_cse_nand_defconfig b/configs/zynq_cse_nand_defconfig index 0910d3bf9d..8740997a82 100644 --- a/configs/zynq_cse_nand_defconfig +++ b/configs/zynq_cse_nand_defconfig @@ -17,7 +17,6 @@ CONFIG_SPL_STACK_R=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/zynq_cse_nor_defconfig b/configs/zynq_cse_nor_defconfig index 0a6b172b7e..a786fa2e23 100644 --- a/configs/zynq_cse_nor_defconfig +++ b/configs/zynq_cse_nor_defconfig @@ -17,7 +17,6 @@ CONFIG_SPL_STACK_R=y # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/zynq_cse_qspi_defconfig b/configs/zynq_cse_qspi_defconfig index 4972d70805..0cc6976c76 100644 --- a/configs/zynq_cse_qspi_defconfig +++ b/configs/zynq_cse_qspi_defconfig @@ -26,7 +26,6 @@ CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 # CONFIG_CMDLINE_EDITING is not set # CONFIG_AUTO_COMPLETE is not set # CONFIG_SYS_LONGHELP is not set -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_AUTOBOOT is not set # CONFIG_CMD_BDI is not set # CONFIG_CMD_CONSOLE is not set diff --git a/configs/zynq_dlc20_rev1_0_defconfig b/configs/zynq_dlc20_rev1_0_defconfig index b6751ad35b..00d1a598dd 100644 --- a/configs/zynq_dlc20_rev1_0_defconfig +++ b/configs/zynq_dlc20_rev1_0_defconfig @@ -21,7 +21,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index d30581b241..751d3735ba 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -16,7 +16,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig index 3c95f0aceb..d9657f9621 100644 --- a/configs/zynq_minized_defconfig +++ b/configs/zynq_minized_defconfig @@ -16,7 +16,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_picozed_defconfig b/configs/zynq_picozed_defconfig index 6457876ce4..c72307a89d 100644 --- a/configs/zynq_picozed_defconfig +++ b/configs/zynq_picozed_defconfig @@ -10,7 +10,6 @@ CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_virt_defconfig b/configs/zynq_virt_defconfig new file mode 100644 index 0000000000..58ce970a1b --- /dev/null +++ b/configs/zynq_virt_defconfig @@ -0,0 +1,79 @@ +CONFIG_ARM=y +CONFIG_SPL_SYS_DCACHE_OFF=y +CONFIG_ARCH_ZYNQ=y +CONFIG_SYS_TEXT_BASE=0x4000000 +CONFIG_SPL_STACK_R_ADDR=0x200000 +CONFIG_SPL=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SYS_CUSTOM_LDSCRIPT=y +CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds" +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_FIT_VERBOSE=y +CONFIG_LEGACY_IMAGE_FORMAT=y +CONFIG_USE_PREBOOT=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_OS_BOOT=y +CONFIG_SPL_SPI_LOAD=y +CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 +CONFIG_CMD_THOR_DOWNLOAD=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_DFU=y +# CONFIG_CMD_FLASH is not set +CONFIG_CMD_FPGA_LOADBP=y +CONFIG_CMD_FPGA_LOADFS=y +CONFIG_CMD_FPGA_LOADMK=y +CONFIG_CMD_FPGA_LOADP=y +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TFTPPUT=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_BOARD=y +CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_SPL_DM_SEQ_ALIAS=y +CONFIG_DFU_MMC=y +CONFIG_DFU_RAM=y +CONFIG_FPGA_XILINX=y +CONFIG_FPGA_ZYNQPL=y +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CADENCE=y +CONFIG_LED=y +CONFIG_LED_GPIO=y +CONFIG_MISC=y +CONFIG_I2C_EEPROM=y +CONFIG_SYS_I2C_EEPROM_ADDR=0x0 +CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW=0x0 +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ZYNQ=y +CONFIG_SPI_FLASH=y +CONFIG_SF_DEFAULT_SPEED=30000000 +CONFIG_SPI_FLASH_ISSI=y +CONFIG_SPI_FLASH_MACRONIX=y +CONFIG_SPI_FLASH_SPANSION=y +CONFIG_SPI_FLASH_STMICRO=y +CONFIG_SPI_FLASH_WINBOND=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_REALTEK=y +CONFIG_PHY_XILINX=y +CONFIG_MII=y +CONFIG_ZYNQ_GEM=y +CONFIG_ZYNQ_SERIAL=y +CONFIG_ZYNQ_QSPI=y +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_ULPI_VIEWPORT=y +CONFIG_USB_ULPI=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_MANUFACTURER="Xilinx" +CONFIG_USB_GADGET_VENDOR_NUM=0x03fd +CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 +CONFIG_CI_UDC=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_USB_FUNCTION_THOR=y diff --git a/configs/zynq_z_turn_defconfig b/configs/zynq_z_turn_defconfig index d133fea395..799277c58e 100644 --- a/configs/zynq_z_turn_defconfig +++ b/configs/zynq_z_turn_defconfig @@ -19,7 +19,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig index 6b670aefc9..74e8b3e32e 100644 --- a/configs/zynq_zc702_defconfig +++ b/configs/zynq_zc702_defconfig @@ -20,7 +20,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_MEMTEST=y CONFIG_CMD_DFU=y diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig index 3d0cd314c6..f831039158 100644 --- a/configs/zynq_zc706_defconfig +++ b/configs/zynq_zc706_defconfig @@ -23,7 +23,6 @@ CONFIG_SPL_FPGA_SUPPORT=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 53108ff03c..301bc2dffd 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -20,7 +20,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm011_defconfig b/configs/zynq_zc770_xm011_defconfig index feedb327bd..8bc49ea066 100644 --- a/configs/zynq_zc770_xm011_defconfig +++ b/configs/zynq_zc770_xm011_defconfig @@ -19,7 +19,6 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm011_x16_defconfig b/configs/zynq_zc770_xm011_x16_defconfig index 28d63c9ec5..70429a2f25 100644 --- a/configs/zynq_zc770_xm011_x16_defconfig +++ b/configs/zynq_zc770_xm011_x16_defconfig @@ -19,7 +19,6 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 01e3d5fb84..78cdd9c9c7 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -16,7 +16,6 @@ CONFIG_LEGACY_IMAGE_FORMAT=y CONFIG_USE_PREBOOT=y CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_IMLS=y CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 30bb0ef3f2..c6678784af 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " # CONFIG_CMD_FLASH is not set CONFIG_CMD_FPGA_LOADBP=y CONFIG_CMD_FPGA_LOADFS=y diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 9b6d754872..38bf3e45e6 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -19,7 +19,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zybo_defconfig b/configs/zynq_zybo_defconfig index 2abc6db0d0..71d1638d45 100644 --- a/configs/zynq_zybo_defconfig +++ b/configs/zynq_zybo_defconfig @@ -19,7 +19,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/configs/zynq_zybo_z7_defconfig b/configs/zynq_zybo_z7_defconfig index eda1416a9b..0cc525c637 100644 --- a/configs/zynq_zybo_z7_defconfig +++ b/configs/zynq_zybo_z7_defconfig @@ -19,7 +19,6 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_OS_BOOT=y CONFIG_SPL_SPI_LOAD=y CONFIG_SYS_SPI_U_BOOT_OFFS=0x100000 -CONFIG_SYS_PROMPT="Zynq> " CONFIG_CMD_THOR_DOWNLOAD=y CONFIG_CMD_DFU=y # CONFIG_CMD_FLASH is not set diff --git a/doc/board/xilinx/index.rst b/doc/board/xilinx/index.rst index 2416fbd216..47f09290af 100644 --- a/doc/board/xilinx/index.rst +++ b/doc/board/xilinx/index.rst @@ -6,4 +6,5 @@ Xilinx .. toctree:: :maxdepth: 2 + xilinx zynq diff --git a/doc/board/xilinx/xilinx.rst b/doc/board/xilinx/xilinx.rst new file mode 100644 index 0000000000..f6ea5dbe21 --- /dev/null +++ b/doc/board/xilinx/xilinx.rst @@ -0,0 +1,38 @@ +.. SPDX-License-Identifier: GPL-2.0+ +.. (C) Copyright 2019 Xilinx, Inc. + +U-Boot device tree bindings +---------------------------- + +All the device tree bindings used in U-Boot are specified in Linux +kernel. Please refer dt bindings from below specified paths in Linux +kernel. + +* ata + - Documentation/devicetree/bindings/ata/ahci-ceva.txt +* gpio + - Documentation/devicetree/bindings/gpio/gpio-xilinx.txt + - Documentation/devicetree/bindings/gpio/gpio-zynq.txt +* i2c + - Documentation/devicetree/bindings/i2c/i2c-xiic.txt + - Documentation/devicetree/bindings/i2c/i2c-cadence.txt +* mmc + - Documentation/devicetree/bindings/mmc/arasan,sdhci.txt +* net + - Documentation/devicetree/bindings/net/macb.txt + - Documentation/devicetree/bindings/net/xilinx_axienet.txt + - Documentation/devicetree/bindings/net/xilinx_emaclite.txt +* serial + - Documentation/devicetree/bindings/serial/cdns,uart.txt + - Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt +* spi + - Documentation/devicetree/bindings/spi/spi-cadence.txt + - Documentation/devicetree/bindings/spi/spi-xilinx.txt + - Documentation/devicetree/bindings/spi/spi-zynqmp-qspi.txt + - Documentation/devicetree/bindings/spi/spi-zynq-qspi.txt +* usb + - Documentation/devicetree/bindings/usb/dwc3-xilinx.txt + - Documentation/devicetree/bindings/usb/dwc3.txt + - Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt +* wdt + - Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index 95fe0aea2c..0035f0a9c6 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -95,6 +95,14 @@ config CLK_HSDK help Enable this to support the cgu clocks on Synopsys ARC HSDK +config CLK_VERSAL + bool "Enable clock driver support for Versal" + depends on ARCH_VERSAL + select ZYNQMP_FIRMWARE + help + This clock driver adds support for clock realted settings for + Versal platform. + config CLK_VEXPRESS_OSC bool "Enable driver for Arm Versatile Express OSC clock generators" depends on CLK && VEXPRESS_CONFIG @@ -113,6 +121,7 @@ config CLK_ZYNQ config CLK_ZYNQMP bool "Enable clock driver support for ZynqMP" depends on ARCH_ZYNQMP + select ZYNQMP_FIRMWARE help This clock driver adds support for clock realted settings for ZynqMP platform. diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 68aabe1ca9..d7cea3b8bf 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -43,3 +43,4 @@ obj-$(CONFIG_SANDBOX) += clk_sandbox_test.o obj-$(CONFIG_SANDBOX_CLK_CCF) += clk_sandbox_ccf.o obj-$(CONFIG_STM32H7) += clk_stm32h7.o obj-$(CONFIG_CLK_TI_SCI) += clk-ti-sci.o +obj-$(CONFIG_CLK_VERSAL) += clk_versal.o diff --git a/drivers/clk/clk_versal.c b/drivers/clk/clk_versal.c new file mode 100644 index 0000000000..df87645774 --- /dev/null +++ b/drivers/clk/clk_versal.c @@ -0,0 +1,746 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2019 Xilinx, Inc. + * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> + */ + +#include <common.h> +#include <linux/bitops.h> +#include <linux/bitfield.h> +#include <malloc.h> +#include <clk-uclass.h> +#include <clk.h> +#include <dm.h> +#include <asm/arch/sys_proto.h> + +#define MAX_PARENT 100 +#define MAX_NODES 6 +#define MAX_NAME_LEN 50 + +#define CLK_TYPE_SHIFT 2 + +#define PM_API_PAYLOAD_LEN 3 + +#define NA_PARENT 0xFFFFFFFF +#define DUMMY_PARENT 0xFFFFFFFE + +#define CLK_TYPE_FIELD_LEN 4 +#define CLK_TOPOLOGY_NODE_OFFSET 16 +#define NODES_PER_RESP 3 + +#define CLK_TYPE_FIELD_MASK 0xF +#define CLK_FLAG_FIELD_MASK GENMASK(21, 8) +#define CLK_TYPE_FLAG_FIELD_MASK GENMASK(31, 24) +#define CLK_TYPE_FLAG2_FIELD_MASK GENMASK(7, 4) +#define CLK_TYPE_FLAG_BITS 8 + +#define CLK_PARENTS_ID_LEN 16 +#define CLK_PARENTS_ID_MASK 0xFFFF + +#define END_OF_TOPOLOGY_NODE 1 +#define END_OF_PARENTS 1 + +#define CLK_VALID_MASK 0x1 +#define NODE_CLASS_SHIFT 26U +#define NODE_SUBCLASS_SHIFT 20U +#define NODE_TYPE_SHIFT 14U +#define NODE_INDEX_SHIFT 0U + +#define CLK_GET_NAME_RESP_LEN 16 +#define CLK_GET_TOPOLOGY_RESP_WORDS 3 +#define CLK_GET_PARENTS_RESP_WORDS 3 +#define CLK_GET_ATTR_RESP_WORDS 1 + +#define NODE_SUBCLASS_CLOCK_PLL 1 +#define NODE_SUBCLASS_CLOCK_OUT 2 +#define NODE_SUBCLASS_CLOCK_REF 3 + +#define NODE_CLASS_CLOCK 2 +#define NODE_CLASS_MASK 0x3F + +#define CLOCK_NODE_TYPE_MUX 1 +#define CLOCK_NODE_TYPE_DIV 4 +#define CLOCK_NODE_TYPE_GATE 6 + +enum pm_query_id { + PM_QID_INVALID, + PM_QID_CLOCK_GET_NAME, + PM_QID_CLOCK_GET_TOPOLOGY, + PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS, + PM_QID_CLOCK_GET_PARENTS, + PM_QID_CLOCK_GET_ATTRIBUTES, + PM_QID_PINCTRL_GET_NUM_PINS, + PM_QID_PINCTRL_GET_NUM_FUNCTIONS, + PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS, + PM_QID_PINCTRL_GET_FUNCTION_NAME, + PM_QID_PINCTRL_GET_FUNCTION_GROUPS, + PM_QID_PINCTRL_GET_PIN_GROUPS, + PM_QID_CLOCK_GET_NUM_CLOCKS, + PM_QID_CLOCK_GET_MAX_DIVISOR, +}; + +enum clk_type { + CLK_TYPE_OUTPUT, + CLK_TYPE_EXTERNAL, +}; + +struct clock_parent { + char name[MAX_NAME_LEN]; + int id; + u32 flag; +}; + +struct clock_topology { + u32 type; + u32 flag; + u32 type_flag; +}; + +struct versal_clock { + char clk_name[MAX_NAME_LEN]; + u32 valid; + enum clk_type type; + struct clock_topology node[MAX_NODES]; + u32 num_nodes; + struct clock_parent parent[MAX_PARENT]; + u32 num_parents; + u32 clk_id; +}; + +struct versal_clk_priv { + struct versal_clock *clk; +}; + +static ulong alt_ref_clk; +static ulong pl_alt_ref_clk; +static ulong ref_clk; + +struct versal_pm_query_data { + u32 qid; + u32 arg1; + u32 arg2; + u32 arg3; +}; + +static struct versal_clock *clock; +static unsigned int clock_max_idx; + +#define PM_QUERY_DATA 35 + +static int versal_pm_query(struct versal_pm_query_data qdata, u32 *ret_payload) +{ + struct pt_regs regs; + + regs.regs[0] = PM_SIP_SVC | PM_QUERY_DATA; + regs.regs[1] = ((u64)qdata.arg1 << 32) | qdata.qid; + regs.regs[2] = ((u64)qdata.arg3 << 32) | qdata.arg2; + + smc_call(®s); + + if (ret_payload) { + ret_payload[0] = (u32)regs.regs[0]; + ret_payload[1] = upper_32_bits(regs.regs[0]); + ret_payload[2] = (u32)regs.regs[1]; + ret_payload[3] = upper_32_bits(regs.regs[1]); + ret_payload[4] = (u32)regs.regs[2]; + } + + return qdata.qid == PM_QID_CLOCK_GET_NAME ? 0 : regs.regs[0]; +} + +static inline int versal_is_valid_clock(u32 clk_id) +{ + if (clk_id >= clock_max_idx) + return -ENODEV; + + return clock[clk_id].valid; +} + +static int versal_get_clock_name(u32 clk_id, char *clk_name) +{ + int ret; + + ret = versal_is_valid_clock(clk_id); + if (ret == 1) { + strncpy(clk_name, clock[clk_id].clk_name, MAX_NAME_LEN); + return 0; + } + + return ret == 0 ? -EINVAL : ret; +} + +static int versal_get_clock_type(u32 clk_id, u32 *type) +{ + int ret; + + ret = versal_is_valid_clock(clk_id); + if (ret == 1) { + *type = clock[clk_id].type; + return 0; + } + + return ret == 0 ? -EINVAL : ret; +} + +static int versal_pm_clock_get_num_clocks(u32 *nclocks) +{ + struct versal_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_NUM_CLOCKS; + + ret = versal_pm_query(qdata, ret_payload); + *nclocks = ret_payload[1]; + + return ret; +} + +static int versal_pm_clock_get_name(u32 clock_id, char *name) +{ + struct versal_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_NAME; + qdata.arg1 = clock_id; + + ret = versal_pm_query(qdata, ret_payload); + if (ret) + return ret; + memcpy(name, ret_payload, CLK_GET_NAME_RESP_LEN); + + return 0; +} + +static int versal_pm_clock_get_topology(u32 clock_id, u32 index, u32 *topology) +{ + struct versal_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_TOPOLOGY; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + ret = versal_pm_query(qdata, ret_payload); + memcpy(topology, &ret_payload[1], CLK_GET_TOPOLOGY_RESP_WORDS * 4); + + return ret; +} + +static int versal_pm_clock_get_parents(u32 clock_id, u32 index, u32 *parents) +{ + struct versal_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_PARENTS; + qdata.arg1 = clock_id; + qdata.arg2 = index; + + ret = versal_pm_query(qdata, ret_payload); + memcpy(parents, &ret_payload[1], CLK_GET_PARENTS_RESP_WORDS * 4); + + return ret; +} + +static int versal_pm_clock_get_attributes(u32 clock_id, u32 *attr) +{ + struct versal_pm_query_data qdata = {0}; + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + qdata.qid = PM_QID_CLOCK_GET_ATTRIBUTES; + qdata.arg1 = clock_id; + + ret = versal_pm_query(qdata, ret_payload); + memcpy(attr, &ret_payload[1], CLK_GET_ATTR_RESP_WORDS * 4); + + return ret; +} + +static int __versal_clock_get_topology(struct clock_topology *topology, + u32 *data, u32 *nnodes) +{ + int i; + + for (i = 0; i < PM_API_PAYLOAD_LEN; i++) { + if (!(data[i] & CLK_TYPE_FIELD_MASK)) + return END_OF_TOPOLOGY_NODE; + topology[*nnodes].type = data[i] & CLK_TYPE_FIELD_MASK; + topology[*nnodes].flag = FIELD_GET(CLK_FLAG_FIELD_MASK, + data[i]); + topology[*nnodes].type_flag = + FIELD_GET(CLK_TYPE_FLAG_FIELD_MASK, data[i]); + topology[*nnodes].type_flag |= + FIELD_GET(CLK_TYPE_FLAG2_FIELD_MASK, data[i]) << + CLK_TYPE_FLAG_BITS; + debug("topology type:0x%x, flag:0x%x, type_flag:0x%x\n", + topology[*nnodes].type, topology[*nnodes].flag, + topology[*nnodes].type_flag); + (*nnodes)++; + } + + return 0; +} + +static int versal_clock_get_topology(u32 clk_id, + struct clock_topology *topology, + u32 *num_nodes) +{ + int j, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_nodes = 0; + for (j = 0; j <= MAX_NODES; j += 3) { + ret = versal_pm_clock_get_topology(clock[clk_id].clk_id, j, + pm_resp); + if (ret) + return ret; + ret = __versal_clock_get_topology(topology, pm_resp, num_nodes); + if (ret == END_OF_TOPOLOGY_NODE) + return 0; + } + + return 0; +} + +static int __versal_clock_get_parents(struct clock_parent *parents, u32 *data, + u32 *nparent) +{ + int i; + struct clock_parent *parent; + + for (i = 0; i < PM_API_PAYLOAD_LEN; i++) { + if (data[i] == NA_PARENT) + return END_OF_PARENTS; + + parent = &parents[i]; + parent->id = data[i] & CLK_PARENTS_ID_MASK; + if (data[i] == DUMMY_PARENT) { + strcpy(parent->name, "dummy_name"); + parent->flag = 0; + } else { + parent->flag = data[i] >> CLK_PARENTS_ID_LEN; + if (versal_get_clock_name(parent->id, parent->name)) + continue; + } + debug("parent name:%s\n", parent->name); + *nparent += 1; + } + + return 0; +} + +static int versal_clock_get_parents(u32 clk_id, struct clock_parent *parents, + u32 *num_parents) +{ + int j = 0, ret; + u32 pm_resp[PM_API_PAYLOAD_LEN] = {0}; + + *num_parents = 0; + do { + /* Get parents from firmware */ + ret = versal_pm_clock_get_parents(clock[clk_id].clk_id, j, + pm_resp); + if (ret) + return ret; + + ret = __versal_clock_get_parents(&parents[j], pm_resp, + num_parents); + if (ret == END_OF_PARENTS) + return 0; + j += PM_API_PAYLOAD_LEN; + } while (*num_parents <= MAX_PARENT); + + return 0; +} + +static u32 versal_clock_get_div(u32 clk_id) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + u32 div; + + versal_pm_request(PM_CLOCK_GETDIVIDER, clk_id, 0, 0, 0, ret_payload); + div = ret_payload[1]; + + return div; +} + +static u32 versal_clock_set_div(u32 clk_id, u32 div) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + + versal_pm_request(PM_CLOCK_SETDIVIDER, clk_id, div, 0, 0, ret_payload); + + return div; +} + +static u64 versal_clock_ref(u32 clk_id) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ref; + + versal_pm_request(PM_CLOCK_GETPARENT, clk_id, 0, 0, 0, ret_payload); + ref = ret_payload[0]; + if (!(ref & 1)) + return ref_clk; + if (ref & 2) + return pl_alt_ref_clk; + return 0; +} + +static u64 versal_clock_get_pll_rate(u32 clk_id) +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + u32 fbdiv; + u32 res; + u32 frac; + u64 freq; + u32 parent_rate, parent_id; + u32 id = clk_id & 0xFFF; + + versal_pm_request(PM_CLOCK_GETSTATE, clk_id, 0, 0, 0, ret_payload); + res = ret_payload[1]; + if (!res) { + printf("0%x PLL not enabled\n", clk_id); + return 0; + } + + parent_id = clock[clock[id].parent[0].id].clk_id; + parent_rate = versal_clock_ref(parent_id); + + versal_pm_request(PM_CLOCK_GETDIVIDER, clk_id, 0, 0, 0, ret_payload); + fbdiv = ret_payload[1]; + versal_pm_request(PM_CLOCK_PLL_GETPARAM, clk_id, 2, 0, 0, ret_payload); + frac = ret_payload[1]; + + freq = (fbdiv * parent_rate) >> (1 << frac); + + return freq; +} + +static u32 versal_clock_mux(u32 clk_id) +{ + int i; + u32 id = clk_id & 0xFFF; + + for (i = 0; i < clock[id].num_nodes; i++) + if (clock[id].node[i].type == CLOCK_NODE_TYPE_MUX) + return 1; + + return 0; +} + +static u32 versal_clock_get_parentid(u32 clk_id) +{ + u32 parent_id = 0; + u32 ret_payload[PAYLOAD_ARG_CNT]; + u32 id = clk_id & 0xFFF; + + if (versal_clock_mux(clk_id)) { + versal_pm_request(PM_CLOCK_GETPARENT, clk_id, 0, 0, 0, + ret_payload); + parent_id = ret_payload[1]; + } + + debug("parent_id:0x%x\n", clock[clock[id].parent[parent_id].id].clk_id); + return clock[clock[id].parent[parent_id].id].clk_id; +} + +static u32 versal_clock_gate(u32 clk_id) +{ + u32 id = clk_id & 0xFFF; + int i; + + for (i = 0; i < clock[id].num_nodes; i++) + if (clock[id].node[i].type == CLOCK_NODE_TYPE_GATE) + return 1; + + return 0; +} + +static u32 versal_clock_div(u32 clk_id) +{ + int i; + u32 id = clk_id & 0xFFF; + + for (i = 0; i < clock[id].num_nodes; i++) + if (clock[id].node[i].type == CLOCK_NODE_TYPE_DIV) + return 1; + + return 0; +} + +static u32 versal_clock_pll(u32 clk_id, u64 *clk_rate) +{ + if (((clk_id >> NODE_SUBCLASS_SHIFT) & NODE_CLASS_MASK) == + NODE_SUBCLASS_CLOCK_PLL && + ((clk_id >> NODE_CLASS_SHIFT) & NODE_CLASS_MASK) == + NODE_CLASS_CLOCK) { + *clk_rate = versal_clock_get_pll_rate(clk_id); + return 1; + } + + return 0; +} + +static u64 versal_clock_calc(u32 clk_id) +{ + u32 parent_id; + u64 clk_rate; + u32 div; + + if (versal_clock_pll(clk_id, &clk_rate)) + return clk_rate; + + parent_id = versal_clock_get_parentid(clk_id); + if (((parent_id >> NODE_SUBCLASS_SHIFT) & + NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_REF) + return versal_clock_ref(clk_id); + + clk_rate = versal_clock_calc(parent_id); + + if (versal_clock_div(clk_id)) { + div = versal_clock_get_div(clk_id); + clk_rate = DIV_ROUND_CLOSEST(clk_rate, div); + } + + return clk_rate; +} + +static int versal_clock_get_rate(u32 clk_id, u64 *clk_rate) +{ + if (((clk_id >> NODE_SUBCLASS_SHIFT) & + NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_REF) + *clk_rate = versal_clock_ref(clk_id); + + if (versal_clock_pll(clk_id, clk_rate)) + return 0; + + if (((clk_id >> NODE_SUBCLASS_SHIFT) & + NODE_CLASS_MASK) == NODE_SUBCLASS_CLOCK_OUT && + ((clk_id >> NODE_CLASS_SHIFT) & + NODE_CLASS_MASK) == NODE_CLASS_CLOCK) { + if (!versal_clock_gate(clk_id)) + return -EINVAL; + *clk_rate = versal_clock_calc(clk_id); + return 0; + } + + return 0; +} + +int soc_clk_dump(void) +{ + u64 clk_rate = 0; + u32 type, ret, i = 0; + + printf("\n ****** VERSAL CLOCKS *****\n"); + + printf("alt_ref_clk:%ld pl_alt_ref_clk:%ld ref_clk:%ld\n", + alt_ref_clk, pl_alt_ref_clk, ref_clk); + for (i = 0; i < clock_max_idx; i++) { + debug("%s\n", clock[i].clk_name); + ret = versal_get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + + ret = versal_clock_get_rate(clock[i].clk_id, &clk_rate); + + if (ret != -EINVAL) + printf("clk: %s freq:%lld\n", + clock[i].clk_name, clk_rate); + } + + return 0; +} + +static void versal_get_clock_info(void) +{ + int i, ret; + u32 attr, type = 0, nodetype, subclass, class; + + for (i = 0; i < clock_max_idx; i++) { + ret = versal_pm_clock_get_attributes(i, &attr); + if (ret) + continue; + + clock[i].valid = attr & CLK_VALID_MASK; + clock[i].type = ((attr >> CLK_TYPE_SHIFT) & 0x1) ? + CLK_TYPE_EXTERNAL : CLK_TYPE_OUTPUT; + nodetype = (attr >> NODE_TYPE_SHIFT) & NODE_CLASS_MASK; + subclass = (attr >> NODE_SUBCLASS_SHIFT) & NODE_CLASS_MASK; + class = (attr >> NODE_CLASS_SHIFT) & NODE_CLASS_MASK; + + clock[i].clk_id = (class << NODE_CLASS_SHIFT) | + (subclass << NODE_SUBCLASS_SHIFT) | + (nodetype << NODE_TYPE_SHIFT) | + (i << NODE_INDEX_SHIFT); + + ret = versal_pm_clock_get_name(clock[i].clk_id, + clock[i].clk_name); + if (ret) + continue; + debug("clk name:%s, Valid:%d, type:%d, clk_id:0x%x\n", + clock[i].clk_name, clock[i].valid, + clock[i].type, clock[i].clk_id); + } + + /* Get topology of all clock */ + for (i = 0; i < clock_max_idx; i++) { + ret = versal_get_clock_type(i, &type); + if (ret || type != CLK_TYPE_OUTPUT) + continue; + debug("clk name:%s\n", clock[i].clk_name); + ret = versal_clock_get_topology(i, clock[i].node, + &clock[i].num_nodes); + if (ret) + continue; + + ret = versal_clock_get_parents(i, clock[i].parent, + &clock[i].num_parents); + if (ret) + continue; + } +} + +int versal_clock_setup(void) +{ + int ret; + + ret = versal_pm_clock_get_num_clocks(&clock_max_idx); + if (ret) + return ret; + + debug("%s, clock_max_idx:0x%x\n", __func__, clock_max_idx); + clock = calloc(clock_max_idx, sizeof(*clock)); + if (!clock) + return -ENOMEM; + + versal_get_clock_info(); + + return 0; +} + +static int versal_clock_get_freq_by_name(char *name, struct udevice *dev, + ulong *freq) +{ + struct clk clk; + int ret; + + ret = clk_get_by_name(dev, name, &clk); + if (ret < 0) { + dev_err(dev, "failed to get %s\n", name); + return ret; + } + + *freq = clk_get_rate(&clk); + if (IS_ERR_VALUE(*freq)) { + dev_err(dev, "failed to get rate %s\n", name); + return -EINVAL; + } + + return 0; +} + +static int versal_clk_probe(struct udevice *dev) +{ + int ret; + struct versal_clk_priv *priv = dev_get_priv(dev); + + debug("%s\n", __func__); + + ret = versal_clock_get_freq_by_name("alt_ref_clk", dev, &alt_ref_clk); + if (ret < 0) + return -EINVAL; + + ret = versal_clock_get_freq_by_name("pl_alt_ref_clk", + dev, &pl_alt_ref_clk); + if (ret < 0) + return -EINVAL; + + ret = versal_clock_get_freq_by_name("ref_clk", dev, &ref_clk); + if (ret < 0) + return -EINVAL; + + versal_clock_setup(); + + priv->clk = clock; + + return ret; +} + +static ulong versal_clk_get_rate(struct clk *clk) +{ + struct versal_clk_priv *priv = dev_get_priv(clk->dev); + u32 id = clk->id; + u32 clk_id; + u64 clk_rate = 0; + + debug("%s\n", __func__); + + clk_id = priv->clk[id].clk_id; + + versal_clock_get_rate(clk_id, &clk_rate); + + return clk_rate; +} + +static ulong versal_clk_set_rate(struct clk *clk, ulong rate) +{ + struct versal_clk_priv *priv = dev_get_priv(clk->dev); + u32 id = clk->id; + u32 clk_id; + u64 clk_rate = 0; + u32 div; + int ret; + + debug("%s\n", __func__); + + clk_id = priv->clk[id].clk_id; + + ret = versal_clock_get_rate(clk_id, &clk_rate); + if (ret) { + printf("Clock is not a Gate:0x%x\n", clk_id); + return 0; + } + + do { + if (versal_clock_div(clk_id)) { + div = versal_clock_get_div(clk_id); + clk_rate *= div; + div = DIV_ROUND_CLOSEST(clk_rate, rate); + versal_clock_set_div(clk_id, div); + debug("%s, div:%d, newrate:%lld\n", __func__, + div, DIV_ROUND_CLOSEST(clk_rate, div)); + return DIV_ROUND_CLOSEST(clk_rate, div); + } + clk_id = versal_clock_get_parentid(clk_id); + } while (((clk_id >> NODE_SUBCLASS_SHIFT) & + NODE_CLASS_MASK) != NODE_SUBCLASS_CLOCK_REF); + + printf("Clock didn't has Divisors:0x%x\n", priv->clk[id].clk_id); + + return clk_rate; +} + +static struct clk_ops versal_clk_ops = { + .set_rate = versal_clk_set_rate, + .get_rate = versal_clk_get_rate, +}; + +static const struct udevice_id versal_clk_ids[] = { + { .compatible = "xlnx,versal-clk" }, + { } +}; + +U_BOOT_DRIVER(versal_clk) = { + .name = "versal-clk", + .id = UCLASS_CLK, + .of_match = versal_clk_ids, + .probe = versal_clk_probe, + .ops = &versal_clk_ops, + .priv_auto_alloc_size = sizeof(struct versal_clk_priv), +}; diff --git a/drivers/firmware/Kconfig b/drivers/firmware/Kconfig index 873bc8c796..b70a206355 100644 --- a/drivers/firmware/Kconfig +++ b/drivers/firmware/Kconfig @@ -26,3 +26,13 @@ config TI_SCI_PROTOCOL This protocol library is used by client drivers to use the features provided by the system controller. + +config ZYNQMP_FIRMWARE + bool "ZynqMP Firmware interface" + select FIRMWARE + help + Firmware interface driver is used by different + drivers to communicate with the firmware for + various platform management services. + Say yes to enable ZynqMP firmware interface driver. + If in doubt, say N. diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile index 6c3e129685..a0c250a473 100644 --- a/drivers/firmware/Makefile +++ b/drivers/firmware/Makefile @@ -2,3 +2,4 @@ obj-$(CONFIG_FIRMWARE) += firmware-uclass.o obj-$(CONFIG_$(SPL_)ARM_PSCI_FW) += psci.o obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o obj-$(CONFIG_SANDBOX) += firmware-sandbox.o +obj-$(CONFIG_ZYNQMP_FIRMWARE) += firmware-zynqmp.o diff --git a/drivers/firmware/firmware-zynqmp.c b/drivers/firmware/firmware-zynqmp.c new file mode 100644 index 0000000000..15e82ac3b3 --- /dev/null +++ b/drivers/firmware/firmware-zynqmp.c @@ -0,0 +1,161 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx Zynq MPSoC Firmware driver + * + * Copyright (C) 2018-2019 Xilinx, Inc. + */ + +#include <common.h> +#include <dm.h> + +#if defined(CONFIG_ZYNQMP_IPI) +#include <mailbox.h> +#include <zynqmp_firmware.h> +#include <asm/arch/sys_proto.h> + +#define PMUFW_PAYLOAD_ARG_CNT 8 + +struct zynqmp_power { + struct mbox_chan tx_chan; + struct mbox_chan rx_chan; +} zynqmp_power; + +static int ipi_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen) +{ + struct zynqmp_ipi_msg msg; + int ret; + + if (req_len > PMUFW_PAYLOAD_ARG_CNT || + res_maxlen > PMUFW_PAYLOAD_ARG_CNT) + return -EINVAL; + + if (!(zynqmp_power.tx_chan.dev) || !(&zynqmp_power.rx_chan.dev)) + return -EINVAL; + + msg.buf = (u32 *)req; + msg.len = req_len; + ret = mbox_send(&zynqmp_power.tx_chan, &msg); + if (ret) { + debug("%s: Sending message failed\n", __func__); + return ret; + } + + msg.buf = res; + msg.len = res_maxlen; + ret = mbox_recv(&zynqmp_power.rx_chan, &msg, 100); + if (ret) + debug("%s: Receiving message failed\n", __func__); + + return ret; +} + +static int send_req(const u32 *req, size_t req_len, u32 *res, size_t res_maxlen) +{ + if (IS_ENABLED(CONFIG_SPL_BUILD)) + return ipi_req(req, req_len, res, res_maxlen); + + return invoke_smc(req[0] + PM_SIP_SVC, 0, 0, 0, 0, res); +} + +unsigned int zynqmp_firmware_version(void) +{ + int ret; + u32 ret_payload[PAYLOAD_ARG_CNT]; + static u32 pm_api_version = ZYNQMP_PM_VERSION_INVALID; + + /* + * Get PMU version only once and later + * just return stored values instead of + * asking PMUFW again. + **/ + if (pm_api_version == ZYNQMP_PM_VERSION_INVALID) { + const u32 request[] = { PM_GET_API_VERSION }; + + ret = send_req(request, ARRAY_SIZE(request), ret_payload, 2); + if (ret) + panic("PMUFW is not found - Please load it!\n"); + + pm_api_version = ret_payload[1]; + if (pm_api_version < ZYNQMP_PM_VERSION) + panic("PMUFW version error. Expected: v%d.%d\n", + ZYNQMP_PM_VERSION_MAJOR, ZYNQMP_PM_VERSION_MINOR); + } + + return pm_api_version; +}; + +/** + * Send a configuration object to the PMU firmware. + * + * @cfg_obj: Pointer to the configuration object + * @size: Size of @cfg_obj in bytes + */ +void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size) +{ + const u32 request[] = { + PM_SET_CONFIGURATION, + (u32)((u64)cfg_obj) + }; + u32 response; + int err; + + printf("Loading new PMUFW cfg obj (%ld bytes)\n", size); + + err = send_req(request, ARRAY_SIZE(request), &response, 1); + if (err) + panic("Cannot load PMUFW configuration object (%d)\n", err); + if (response != 0) + panic("PMUFW returned 0x%08x status!\n", response); +} + +static int zynqmp_power_probe(struct udevice *dev) +{ + int ret = 0; + + debug("%s, (dev=%p)\n", __func__, dev); + + ret = mbox_get_by_name(dev, "tx", &zynqmp_power.tx_chan); + if (ret) { + debug("%s, cannot tx mailbox\n", __func__); + return ret; + } + + ret = mbox_get_by_name(dev, "rx", &zynqmp_power.rx_chan); + if (ret) { + debug("%s, cannot rx mailbox\n", __func__); + return ret; + } + + ret = zynqmp_firmware_version(); + printf("PMUFW:\tv%d.%d\n", + ret >> ZYNQMP_PM_VERSION_MAJOR_SHIFT, + ret & ZYNQMP_PM_VERSION_MINOR_MASK); + + return 0; +}; + +static const struct udevice_id zynqmp_power_ids[] = { + { .compatible = "xlnx,zynqmp-power" }, + { } +}; + +U_BOOT_DRIVER(zynqmp_power) = { + .name = "zynqmp_power", + .id = UCLASS_FIRMWARE, + .of_match = zynqmp_power_ids, + .probe = zynqmp_power_probe, +}; +#endif + +static const struct udevice_id zynqmp_firmware_ids[] = { + { .compatible = "xlnx,zynqmp-firmware" }, + { .compatible = "xlnx,versal-firmware"}, + { } +}; + +U_BOOT_DRIVER(zynqmp_firmware) = { + .id = UCLASS_FIRMWARE, + .name = "zynqmp-firmware", + .probe = dm_scan_fdt_dev, + .of_match = zynqmp_firmware_ids, +}; diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index 105a299812..fe398a1d49 100644 --- a/drivers/fpga/Kconfig +++ b/drivers/fpga/Kconfig @@ -56,6 +56,15 @@ config FPGA_ZYNQMPPL Enable FPGA driver for loading bitstream in BIT and BIN format on Xilinx Zynq UltraScale+ (ZynqMP) device. +config FPGA_VERSALPL + bool "Enable Xilinx FPGA driver for Versal" + depends on FPGA_XILINX + help + Enable FPGA driver for loading bitstream in PDI format on Xilinx + Versal device. PDI is a new programmable device image format for + Versal. The bitstream will only be generated as PDI for Versal + platform. + config FPGA_SPARTAN3 bool "Enable Spartan3 FPGA driver" depends on FPGA_XILINX diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index 5a778c10e8..04e6480f20 100644 --- a/drivers/fpga/Makefile +++ b/drivers/fpga/Makefile @@ -6,6 +6,7 @@ obj-y += fpga.o obj-$(CONFIG_FPGA_SPARTAN2) += spartan2.o obj-$(CONFIG_FPGA_SPARTAN3) += spartan3.o +obj-$(CONFIG_FPGA_VERSALPL) += versalpl.o obj-$(CONFIG_FPGA_VIRTEX2) += virtex2.o obj-$(CONFIG_FPGA_ZYNQPL) += zynqpl.o obj-$(CONFIG_FPGA_ZYNQMPPL) += zynqmppl.o diff --git a/drivers/fpga/versalpl.c b/drivers/fpga/versalpl.c new file mode 100644 index 0000000000..69617a9b1d --- /dev/null +++ b/drivers/fpga/versalpl.c @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * (C) Copyright 2019, Xilinx, Inc, + * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <memalign.h> +#include <versalpl.h> + +static ulong versal_align_dma_buffer(ulong *buf, u32 len) +{ + ulong *new_buf; + + if ((ulong)buf != ALIGN((ulong)buf, ARCH_DMA_MINALIGN)) { + new_buf = (ulong *)ALIGN((ulong)buf, ARCH_DMA_MINALIGN); + memcpy(new_buf, buf, len); + buf = new_buf; + } + + return (ulong)buf; +} + +static int versal_load(xilinx_desc *desc, const void *buf, size_t bsize, + bitstream_type bstype) +{ + ulong bin_buf; + int ret; + u32 buf_lo, buf_hi; + u32 ret_payload[5]; + + bin_buf = versal_align_dma_buffer((ulong *)buf, bsize); + + debug("%s called!\n", __func__); + flush_dcache_range(bin_buf, bin_buf + bsize); + + buf_lo = lower_32_bits(bin_buf); + buf_hi = upper_32_bits(bin_buf); + + ret = versal_pm_request(VERSAL_PM_LOAD_PDI, VERSAL_PM_PDI_TYPE, buf_lo, + buf_hi, 0, ret_payload); + if (ret) + puts("PL FPGA LOAD fail\n"); + + return ret; +} + +struct xilinx_fpga_op versal_op = { + .load = versal_load, +}; diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index f5135504ee..4b0334b6be 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -226,7 +226,10 @@ int xilinx_info(xilinx_desc *desc) case xilinx_zynqmp: printf("ZynqMP PL\n"); break; - /* Add new family types here */ + case xilinx_versal: + printf("Versal PL\n"); + break; + /* Add new family types here */ default: printf ("Unknown family type, %d\n", desc->family); } @@ -257,6 +260,9 @@ int xilinx_info(xilinx_desc *desc) case csu_dma: printf("csu_dma configuration interface (ZynqMP)\n"); break; + case cfi: + printf("CFI configuration interface (Versal)\n"); + break; /* Add new interface types here */ default: printf ("Unsupported interface type, %d\n", desc->iface); diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c index 22bfdd8dce..c2670271c8 100644 --- a/drivers/fpga/zynqmppl.c +++ b/drivers/fpga/zynqmppl.c @@ -8,6 +8,7 @@ #include <console.h> #include <common.h> #include <zynqmppl.h> +#include <zynqmp_firmware.h> #include <linux/sizes.h> #include <asm/arch/sys_proto.h> #include <memalign.h> @@ -151,9 +152,9 @@ static ulong zynqmp_align_dma_buffer(u32 *buf, u32 len, u32 swap) buf = new_buf; } else if ((swap != SWAP_DONE) && - (zynqmp_pmufw_version() <= PMUFW_V1_0)) { + (zynqmp_firmware_version() <= PMUFW_V1_0)) { /* For bitstream which are aligned */ - u32 *new_buf = (u32 *)buf; + new_buf = buf; printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, swap); @@ -204,7 +205,7 @@ static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize, u32 ret_payload[PAYLOAD_ARG_CNT]; bool xilfpga_old = false; - if (zynqmp_pmufw_version() <= PMUFW_V1_0) { + if (zynqmp_firmware_version() <= PMUFW_V1_0) { puts("WARN: PMUFW v1.0 or less is detected\n"); puts("WARN: Not all bitstream formats are supported\n"); puts("WARN: Please upgrade PMUFW\n"); diff --git a/drivers/gpio/zynq_gpio.c b/drivers/gpio/zynq_gpio.c index 55a5cba068..a760c5bdda 100644 --- a/drivers/gpio/zynq_gpio.c +++ b/drivers/gpio/zynq_gpio.c @@ -292,7 +292,7 @@ static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio, writel(reg, platdata->base + ZYNQ_GPIO_OUTEN_OFFSET(bank_num)); /* set the state of the pin */ - gpio_set_value(gpio, value); + zynq_gpio_set_value(dev, gpio, value); return 0; } diff --git a/drivers/mailbox/Kconfig b/drivers/mailbox/Kconfig index 11bf5522db..85c2a829ae 100644 --- a/drivers/mailbox/Kconfig +++ b/drivers/mailbox/Kconfig @@ -41,4 +41,10 @@ config K3_SEC_PROXY Select this driver if your platform has support for this hardware block. +config ZYNQMP_IPI + bool "Xilinx ZynqMP IPI controller support" + depends on DM_MAILBOX && ARCH_ZYNQMP + help + This enables support for the Xilinx ZynqMP Inter Processor Interrupt + communication controller. endmenu diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile index a753cc4e68..d2ace8cd21 100644 --- a/drivers/mailbox/Makefile +++ b/drivers/mailbox/Makefile @@ -9,3 +9,4 @@ obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox-test.o obj-$(CONFIG_STM32_IPCC) += stm32-ipcc.o obj-$(CONFIG_TEGRA_HSP) += tegra-hsp.o obj-$(CONFIG_K3_SEC_PROXY) += k3-sec-proxy.o +obj-$(CONFIG_ZYNQMP_IPI) += zynqmp-ipi.o diff --git a/drivers/mailbox/mailbox-uclass.c b/drivers/mailbox/mailbox-uclass.c index 1b4a5863c9..9fdb6279e4 100644 --- a/drivers/mailbox/mailbox-uclass.c +++ b/drivers/mailbox/mailbox-uclass.c @@ -49,7 +49,16 @@ int mbox_get_by_index(struct udevice *dev, int index, struct mbox_chan *chan) if (ret) { debug("%s: uclass_get_device_by_of_offset failed: %d\n", __func__, ret); - return ret; + + /* Test with parent node */ + ret = uclass_get_device_by_ofnode(UCLASS_MAILBOX, + ofnode_get_parent(args.node), + &dev_mbox); + if (ret) { + debug("%s: mbox node from parent failed: %d\n", + __func__, ret); + return ret; + }; } ops = mbox_dev_ops(dev_mbox); @@ -63,7 +72,8 @@ int mbox_get_by_index(struct udevice *dev, int index, struct mbox_chan *chan) return ret; } - ret = ops->request(chan); + if (ops->request) + ret = ops->request(chan); if (ret) { debug("ops->request() failed: %d\n", ret); return ret; @@ -94,7 +104,10 @@ int mbox_free(struct mbox_chan *chan) debug("%s(chan=%p)\n", __func__, chan); - return ops->free(chan); + if (ops->free) + return ops->free(chan); + + return 0; } int mbox_send(struct mbox_chan *chan, const void *data) diff --git a/drivers/mailbox/zynqmp-ipi.c b/drivers/mailbox/zynqmp-ipi.c new file mode 100644 index 0000000000..c181a7b817 --- /dev/null +++ b/drivers/mailbox/zynqmp-ipi.c @@ -0,0 +1,134 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Xilinx Zynq MPSoC Mailbox driver + * + * Copyright (C) 2018-2019 Xilinx, Inc. + */ + +#include <common.h> +#include <asm/io.h> +#include <dm.h> +#include <mailbox-uclass.h> +#include <mach/sys_proto.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <wait_bit.h> + +/* IPI bitmasks, register base */ +/* TODO: move reg base to DT */ +#define IPI_BIT_MASK_PMU0 0x10000 +#define IPI_INT_REG_BASE_APU 0xFF300000 + +struct ipi_int_regs { + u32 trig; /* 0x0 */ + u32 obs; /* 0x4 */ + u32 ist; /* 0x8 */ + u32 imr; /* 0xC */ + u32 ier; /* 0x10 */ + u32 idr; /* 0x14 */ +}; + +#define ipi_int_apu ((struct ipi_int_regs *)IPI_INT_REG_BASE_APU) + +struct zynqmp_ipi { + void __iomem *local_req_regs; + void __iomem *local_res_regs; + void __iomem *remote_req_regs; + void __iomem *remote_res_regs; +}; + +static int zynqmp_ipi_send(struct mbox_chan *chan, const void *data) +{ + const struct zynqmp_ipi_msg *msg = (struct zynqmp_ipi_msg *)data; + struct zynqmp_ipi *zynqmp = dev_get_priv(chan->dev); + u32 ret; + u32 *mbx = (u32 *)zynqmp->local_req_regs; + + for (size_t i = 0; i < msg->len; i++) + writel(msg->buf[i], &mbx[i]); + + /* Write trigger interrupt */ + writel(IPI_BIT_MASK_PMU0, &ipi_int_apu->trig); + + /* Wait until observation bit is cleared */ + ret = wait_for_bit_le32(&ipi_int_apu->obs, IPI_BIT_MASK_PMU0, false, + 100, false); + + debug("%s, send %ld bytes\n", __func__, msg->len); + return ret; +}; + +static int zynqmp_ipi_recv(struct mbox_chan *chan, void *data) +{ + struct zynqmp_ipi_msg *msg = (struct zynqmp_ipi_msg *)data; + struct zynqmp_ipi *zynqmp = dev_get_priv(chan->dev); + u32 *mbx = (u32 *)zynqmp->local_res_regs; + + for (size_t i = 0; i < msg->len; i++) + msg->buf[i] = readl(&mbx[i]); + + debug("%s, recv %ld bytes\n", __func__, msg->len); + return 0; +}; + +static int zynqmp_ipi_probe(struct udevice *dev) +{ + struct zynqmp_ipi *zynqmp = dev_get_priv(dev); + struct resource res; + ofnode node; + + debug("%s(dev=%p)\n", __func__, dev); + + /* Get subnode where the regs are defined */ + /* Note IPI mailbox node needs to be the first one in DT */ + node = ofnode_first_subnode(dev_ofnode(dev)); + + if (ofnode_read_resource_byname(node, "local_request_region", &res)) { + dev_err(dev, "No reg property for local_request_region\n"); + return -EINVAL; + }; + zynqmp->local_req_regs = devm_ioremap(dev, res.start, + (res.start - res.end)); + + if (ofnode_read_resource_byname(node, "local_response_region", &res)) { + dev_err(dev, "No reg property for local_response_region\n"); + return -EINVAL; + }; + zynqmp->local_res_regs = devm_ioremap(dev, res.start, + (res.start - res.end)); + + if (ofnode_read_resource_byname(node, "remote_request_region", &res)) { + dev_err(dev, "No reg property for remote_request_region\n"); + return -EINVAL; + }; + zynqmp->remote_req_regs = devm_ioremap(dev, res.start, + (res.start - res.end)); + + if (ofnode_read_resource_byname(node, "remote_response_region", &res)) { + dev_err(dev, "No reg property for remote_response_region\n"); + return -EINVAL; + }; + zynqmp->remote_res_regs = devm_ioremap(dev, res.start, + (res.start - res.end)); + + return 0; +}; + +static const struct udevice_id zynqmp_ipi_ids[] = { + { .compatible = "xlnx,zynqmp-ipi-mailbox" }, + { } +}; + +struct mbox_ops zynqmp_ipi_mbox_ops = { + .send = zynqmp_ipi_send, + .recv = zynqmp_ipi_recv, +}; + +U_BOOT_DRIVER(zynqmp_ipi) = { + .name = "zynqmp-ipi", + .id = UCLASS_MAILBOX, + .of_match = zynqmp_ipi_ids, + .probe = zynqmp_ipi_probe, + .priv_auto_alloc_size = sizeof(struct zynqmp_ipi), + .ops = &zynqmp_ipi_mbox_ops, +}; diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index 7361bcaf8e..2bc9d8d22d 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -634,6 +634,12 @@ config ZYNQ_SDHCI_MIN_FREQ help Set the minimum frequency of the controller. +config ZYNQ_HISPD_BROKEN + bool "High speed broken for Zynq SDHCI controller" + depends on MMC_SDHCI_ZYNQ + help + Set if high speed mode is broken. + config MMC_SUNXI bool "Allwinner sunxi SD/MMC Host Controller support" depends on ARCH_SUNXI && !UART0_PORT_F diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c index 3225a7ac93..529eec9c45 100644 --- a/drivers/mmc/zynq_sdhci.c +++ b/drivers/mmc/zynq_sdhci.c @@ -190,7 +190,7 @@ static void arasan_sdhci_set_control_reg(struct sdhci_host *host) } #endif -#if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP) +#if defined(CONFIG_ARCH_ZYNQMP) const struct sdhci_ops arasan_ops = { .platform_execute_tuning = &arasan_sdhci_execute_tuning, .set_delay = &arasan_sdhci_set_tapdelay, @@ -266,7 +266,7 @@ static int arasan_sdhci_ofdata_to_platdata(struct udevice *dev) priv->host->name = dev->name; -#if defined(CONFIG_DM_MMC) && defined(CONFIG_ARCH_ZYNQMP) +#if defined(CONFIG_ARCH_ZYNQMP) priv->host->ops = &arasan_ops; #endif diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 2a3da068c9..30bd8e7653 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -228,6 +228,13 @@ config PHY_VITESSE config PHY_XILINX bool "Xilinx Ethernet PHYs support" +config PHY_XILINX_GMII2RGMII + bool "Xilinx GMII to RGMII Ethernet PHYs support" + help + This adds support for Xilinx GMII to RGMII IP core. This IP acts + as bridge between MAC connected over GMII and external phy that + is connected over RGMII interface. + config PHY_FIXED bool "Fixed-Link PHY" depends on DM_ETH diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index 555da83630..76b6197009 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -27,6 +27,7 @@ obj-$(CONFIG_PHY_SMSC) += smsc.o obj-$(CONFIG_PHY_TERANETICS) += teranetics.o obj-$(CONFIG_PHY_TI) += ti.o obj-$(CONFIG_PHY_XILINX) += xilinx_phy.o +obj-$(CONFIG_PHY_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o obj-$(CONFIG_PHY_VITESSE) += vitesse.o obj-$(CONFIG_PHY_MSCC) += mscc.o obj-$(CONFIG_PHY_FIXED) += fixed.o diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index ae37dd6c1e..f2d17aa91a 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -458,6 +458,11 @@ static struct phy_driver genphy_driver = { .shutdown = genphy_shutdown, }; +int genphy_init(void) +{ + return phy_register(&genphy_driver); +} + static LIST_HEAD(phy_drivers); int phy_init(void) @@ -540,6 +545,11 @@ int phy_init(void) #ifdef CONFIG_PHY_FIXED phy_fixed_init(); #endif +#ifdef CONFIG_PHY_XILINX_GMII2RGMII + phy_xilinx_gmii2rgmii_init(); +#endif + genphy_init(); + return 0; } @@ -911,6 +921,41 @@ void phy_connect_dev(struct phy_device *phydev, struct eth_device *dev) debug("%s connected to %s\n", dev->name, phydev->drv->name); } +#ifdef CONFIG_PHY_XILINX_GMII2RGMII +#ifdef CONFIG_DM_ETH +static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, + struct udevice *dev, + phy_interface_t interface) +#else +static struct phy_device *phy_connect_gmii2rgmii(struct mii_dev *bus, + struct eth_device *dev, + phy_interface_t interface) +#endif +{ + struct phy_device *phydev = NULL; + int sn = dev_of_offset(dev); + int off; + + while (sn > 0) { + off = fdt_node_offset_by_compatible(gd->fdt_blob, sn, + "xlnx,gmii-to-rgmii-1.0"); + if (off > 0) { + phydev = phy_device_create(bus, off, + PHY_GMII2RGMII_ID, false, + interface); + break; + } + if (off == -FDT_ERR_NOTFOUND) + sn = fdt_first_subnode(gd->fdt_blob, sn); + else + printf("%s: Error finding compat string:%d\n", + __func__, off); + } + + return phydev; +} +#endif + #ifdef CONFIG_PHY_FIXED #ifdef CONFIG_DM_ETH static struct phy_device *phy_connect_fixed(struct mii_dev *bus, @@ -957,6 +1002,10 @@ struct phy_device *phy_connect(struct mii_dev *bus, int addr, #ifdef CONFIG_PHY_FIXED phydev = phy_connect_fixed(bus, dev, interface); #endif +#ifdef CONFIG_PHY_XILINX_GMII2RGMII + if (!phydev) + phydev = phy_connect_gmii2rgmii(bus, dev, interface); +#endif if (!phydev) phydev = phy_find_by_mask(bus, mask, interface); diff --git a/drivers/net/phy/xilinx_gmii2rgmii.c b/drivers/net/phy/xilinx_gmii2rgmii.c new file mode 100644 index 0000000000..8c20da2682 --- /dev/null +++ b/drivers/net/phy/xilinx_gmii2rgmii.c @@ -0,0 +1,144 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx GMII2RGMII phy driver + * + * Copyright (C) 2018 Xilinx, Inc. + */ + +#include <dm.h> +#include <phy.h> +#include <config.h> +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define ZYNQ_GMII2RGMII_REG 0x10 +#define ZYNQ_GMII2RGMII_SPEED_MASK (BMCR_SPEED1000 | BMCR_SPEED100) + +static int xilinxgmiitorgmii_config(struct phy_device *phydev) +{ + struct phy_device *ext_phydev = phydev->priv; + + debug("%s\n", __func__); + if (ext_phydev->drv->config) + ext_phydev->drv->config(ext_phydev); + + return 0; +} + +static int xilinxgmiitorgmii_extread(struct phy_device *phydev, int addr, + int devaddr, int regnum) +{ + struct phy_device *ext_phydev = phydev->priv; + + debug("%s\n", __func__); + if (ext_phydev->drv->readext) + ext_phydev->drv->readext(ext_phydev, addr, devaddr, regnum); + + return 0; +} + +static int xilinxgmiitorgmii_extwrite(struct phy_device *phydev, int addr, + int devaddr, int regnum, u16 val) + +{ + struct phy_device *ext_phydev = phydev->priv; + + debug("%s\n", __func__); + if (ext_phydev->drv->writeext) + ext_phydev->drv->writeext(ext_phydev, addr, devaddr, regnum, + val); + + return 0; +} + +static int xilinxgmiitorgmii_startup(struct phy_device *phydev) +{ + u16 val = 0; + struct phy_device *ext_phydev = phydev->priv; + + debug("%s\n", __func__); + ext_phydev->dev = phydev->dev; + if (ext_phydev->drv->startup) + ext_phydev->drv->startup(ext_phydev); + + val = phy_read(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG); + val &= ~ZYNQ_GMII2RGMII_SPEED_MASK; + + if (ext_phydev->speed == SPEED_1000) + val |= BMCR_SPEED1000; + else if (ext_phydev->speed == SPEED_100) + val |= BMCR_SPEED100; + + phy_write(phydev, phydev->addr, ZYNQ_GMII2RGMII_REG, val | + BMCR_FULLDPLX); + + phydev->duplex = ext_phydev->duplex; + phydev->speed = ext_phydev->speed; + phydev->link = ext_phydev->link; + + return 0; +} + +static int xilinxgmiitorgmii_probe(struct phy_device *phydev) +{ + int ofnode = phydev->addr; + u32 phy_of_handle; + int ext_phyaddr = -1; + struct phy_device *ext_phydev; + + debug("%s\n", __func__); + + if (phydev->interface != PHY_INTERFACE_MODE_GMII) { + printf("Incorrect interface type\n"); + return -EINVAL; + } + + /* + * Read the phy address again as the one we read in ethernet driver + * was overwritten for the purpose of storing the ofnode + */ + phydev->addr = fdtdec_get_int(gd->fdt_blob, ofnode, "reg", -1); + phy_of_handle = fdtdec_lookup_phandle(gd->fdt_blob, ofnode, + "phy-handle"); + if (phy_of_handle > 0) + ext_phyaddr = fdtdec_get_int(gd->fdt_blob, + phy_of_handle, + "reg", -1); + ext_phydev = phy_find_by_mask(phydev->bus, + 1 << ext_phyaddr, + PHY_INTERFACE_MODE_RGMII); + if (!ext_phydev) { + printf("%s, No external phy device found\n", __func__); + return -EINVAL; + } + + ext_phydev->node = offset_to_ofnode(phy_of_handle); + phydev->priv = ext_phydev; + + debug("%s, gmii2rgmmi:0x%x, extphy:0x%x\n", __func__, phydev->addr, + ext_phyaddr); + + phydev->flags |= PHY_FLAG_BROKEN_RESET; + + return 0; +} + +static struct phy_driver gmii2rgmii_driver = { + .name = "XILINX GMII2RGMII", + .uid = PHY_GMII2RGMII_ID, + .mask = 0xffffffff, + .features = PHY_GBIT_FEATURES, + .probe = xilinxgmiitorgmii_probe, + .config = xilinxgmiitorgmii_config, + .startup = xilinxgmiitorgmii_startup, + .writeext = xilinxgmiitorgmii_extwrite, + .readext = xilinxgmiitorgmii_extread, +}; + +int phy_xilinx_gmii2rgmii_init(void) +{ + phy_register(&gmii2rgmii_driver); + + return 0; +} diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 26c21c6d70..36d651109c 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -93,6 +93,7 @@ struct axidma_priv { struct phy_device *phydev; struct mii_dev *bus; u8 eth_hasnobuf; + int phy_of_handle; }; /* BD descriptors */ @@ -276,6 +277,8 @@ static int axiemac_phy_init(struct udevice *dev) phydev->supported &= supported; phydev->advertising = phydev->supported; priv->phydev = phydev; + if (priv->phy_of_handle) + priv->phydev->node = offset_to_ofnode(priv->phy_of_handle); phy_config(phydev); return 0; @@ -736,8 +739,10 @@ static int axi_emac_ofdata_to_platdata(struct udevice *dev) priv->phyaddr = -1; offset = fdtdec_lookup_phandle(gd->fdt_blob, node, "phy-handle"); - if (offset > 0) + if (offset > 0) { priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", -1); + priv->phy_of_handle = offset; + } phy_mode = fdt_getprop(gd->fdt_blob, node, "phy-mode", NULL); if (phy_mode) diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c index 033efb8195..a7a6ce987f 100644 --- a/drivers/net/zynq_gem.c +++ b/drivers/net/zynq_gem.c @@ -26,8 +26,6 @@ #include <asm/arch/sys_proto.h> #include <linux/errno.h> -DECLARE_GLOBAL_DATA_PTR; - /* Bit/mask specification */ #define ZYNQ_GEM_PHYMNTNC_OP_MASK 0x40020000 /* operation mask bits */ #define ZYNQ_GEM_PHYMNTNC_OP_R_MASK 0x20000000 /* read operation */ @@ -465,7 +463,6 @@ static int zynq_gem_init(struct udevice *dev) break; } -#if !defined(CONFIG_ARCH_VERSAL) ret = clk_set_rate(&priv->clk, clk_rate); if (IS_ERR_VALUE(ret) && ret != (unsigned long)-ENOSYS) { dev_err(dev, "failed to set tx clock rate\n"); @@ -477,9 +474,6 @@ static int zynq_gem_init(struct udevice *dev) dev_err(dev, "failed to enable tx clock\n"); return ret; } -#else - debug("requested clk_rate %ld\n", clk_rate); -#endif setbits_le32(®s->nwctrl, ZYNQ_GEM_NWCTRL_RXEN_MASK | ZYNQ_GEM_NWCTRL_TXEN_MASK); @@ -753,6 +747,7 @@ static int zynq_gem_ofdata_to_platdata(struct udevice *dev) } static const struct udevice_id zynq_gem_ids[] = { + { .compatible = "cdns,versal-gem" }, { .compatible = "cdns,zynqmp-gem" }, { .compatible = "cdns,zynq-gem" }, { .compatible = "cdns,gem" }, diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 56e2a046bf..2498f0efb1 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -440,6 +440,8 @@ static int dwc3_core_init(struct dwc3 *dwc) goto err0; } + dwc3_phy_setup(dwc); + ret = dwc3_core_soft_reset(dwc); if (ret) goto err0; @@ -514,8 +516,6 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); - dwc3_phy_setup(dwc); - ret = dwc3_alloc_scratch_buffers(dwc); if (ret) goto err0; diff --git a/env/Kconfig b/env/Kconfig index 74db2f38cc..e4ba12ece3 100644 --- a/env/Kconfig +++ b/env/Kconfig @@ -473,6 +473,7 @@ config ENV_OFFSET default 0x88000 if ARCH_SUNXI default 0xE0000 if ARCH_ZYNQ default 0x1E00000 if ARCH_ZYNQMP + default 0x7F40000 if ARCH_VERSAL default 0 if ARC default 0x140000 if ARCH_AT91 default 0x260000 if ARCH_OMAP2PLUS @@ -491,8 +492,8 @@ config ENV_SIZE config ENV_SECT_SIZE hex "Environment Sector-Size" - depends on (!ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_OMAP2PLUS || ARCH_AT91) )|| ARCH_STM32MP - default 0x40000 if ARCH_ZYNQMP + depends on (!ENV_IS_NOWHERE && (ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_VERSAL || ARCH_OMAP2PLUS || ARCH_AT91) )|| ARCH_STM32MP + default 0x40000 if ARCH_ZYNQMP || ARCH_VERSAL default 0x20000 if ARCH_ZYNQ || ARCH_OMAP2PLUS || ARCH_AT91 help Size of the sector containing the environment. diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index dacf36bf79..fe45917b88 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -138,8 +138,6 @@ #define CONFIG_CMD_TIME -#define CONFIG_SYS_BOOT_RAMDISK_HIGH - #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 814fec5b33..f1d0def3c1 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -13,6 +13,8 @@ /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 +#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) + /* linear and spi flash memory */ #ifdef XILINX_FLASH_START #define FLASH @@ -100,6 +102,9 @@ #endif /* !SPIFLASH */ #endif /* !FLASH */ +#define XILINX_USE_ICACHE 1 +#define XILINX_USE_DCACHE 1 + #if defined(XILINX_USE_ICACHE) # define CONFIG_ICACHE #else @@ -152,9 +157,6 @@ "setenv stdin serial\0" #endif -/* Enable flat device tree support */ -#define CONFIG_LMB 1 - #if defined(CONFIG_XILINX_AXIEMAC) # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 1 #endif diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 296f4502c6..f426127edc 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -52,6 +52,26 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE #define CONFIG_SYS_MAXARGS 64 +#if defined(CONFIG_CMD_DFU) +#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 +#define DFU_DEFAULT_POLL_TIMEOUT 300 +#define CONFIG_THOR_RESET_OFF +#define DFU_ALT_INFO_RAM \ + "dfu_ram_info=" \ + "setenv dfu_alt_info " \ + "Image ram $kernel_addr_r $kernel_size_r\\\\;" \ + "system.dtb ram $fdt_addr_r $fdt_size_r\0" \ + "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ + "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" + +#define DFU_ALT_INFO \ + DFU_ALT_INFO_RAM +#endif + +#if !defined(DFU_ALT_INFO) +# define DFU_ALT_INFO +#endif + /* Ethernet driver */ #if defined(CONFIG_ZYNQ_GEM) # define CONFIG_NET_MULTI @@ -65,13 +85,14 @@ #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_high=10000000\0" \ - "initrd_high=10000000\0" \ "fdt_addr_r=0x40000000\0" \ + "fdt_size_r=0x400000\0" \ "pxefile_addr_r=0x10000000\0" \ "kernel_addr_r=0x18000000\0" \ - "scriptaddr=0x02000000\0" \ + "kernel_size_r=0x10000000\0" \ + "scriptaddr=0x20000000\0" \ "ramdisk_addr_r=0x02100000\0" \ - "script_offset_f=0x3f80000\0" \ + "script_offset_f=0x7F80000\0" \ "script_size_f=0x80000\0" #if defined(CONFIG_MMC_SDHCI_ZYNQ) @@ -94,9 +115,29 @@ #define BOOTENV_DEV_NAME_XSPI(devtypeu, devtypel, instance) \ "xspi " +#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) + +#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ + "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ + "jtag " + +#define BOOT_TARGET_DEVICES_DFU_USB(func) func(DFU_USB, dfu_usb, 0) + +#define BOOTENV_DEV_DFU_USB(devtypeu, devtypel, instance) \ + "bootcmd_dfu_usb=setenv dfu_alt_info boot.scr ram $scriptaddr " \ + "$script_size_f; dfu 0 ram 0 && source $scriptaddr; " \ + "echo SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_DFU_USB(devtypeu, devtypel, instance) \ + "dfu_usb " + #define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_JTAG(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_XSPI(func) \ + BOOT_TARGET_DEVICES_DFU_USB(func) \ func(PXE, pxe, na) \ func(DHCP, dhcp, na) @@ -106,7 +147,8 @@ #ifndef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ ENV_MEM_LAYOUT_SETTINGS \ - BOOTENV + BOOTENV \ + DFU_ALT_INFO #endif #endif /* __XILINX_VERSAL_H */ diff --git a/include/configs/xilinx_versal_mini.h b/include/configs/xilinx_versal_mini.h index d30a697a57..ee305e0226 100644 --- a/include/configs/xilinx_versal_mini.h +++ b/include/configs/xilinx_versal_mini.h @@ -26,4 +26,7 @@ #undef CONFIG_BOOTP_BOOTFILESIZE #undef CONFIG_BOOTP_MAY_FAIL +#undef CONFIG_SYS_CBSIZE +#define CONFIG_SYS_CBSIZE 1024 + #endif /* __CONFIG_VERSAL_MINI_H */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index a1c55a8306..ee1ceebf12 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -109,11 +109,10 @@ #define ENV_MEM_LAYOUT_SETTINGS \ "fdt_high=10000000\0" \ - "initrd_high=10000000\0" \ "fdt_addr_r=0x40000000\0" \ "pxefile_addr_r=0x10000000\0" \ "kernel_addr_r=0x18000000\0" \ - "scriptaddr=0x02000000\0" \ + "scriptaddr=0x20000000\0" \ "ramdisk_addr_r=0x02100000\0" \ "script_offset_f=0x3e80000\0" \ "script_size_f=0x80000\0" \ @@ -176,7 +175,16 @@ #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ #devtypel #instance " " +#define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) + +#define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ + "bootcmd_jtag=source $scriptaddr; echo SCRIPT FAILED: continuing...;\0" + +#define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ + "jtag " + #define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICES_JTAG(func) \ BOOT_TARGET_DEVICES_MMC(func) \ BOOT_TARGET_DEVICES_QSPI(func) \ BOOT_TARGET_DEVICES_NAND(func) \ diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index ae08ebf2af..b6c9f2c8dd 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -111,13 +111,13 @@ #else #ifdef CONFIG_CMD_MMC -#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) +#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) #else #define BOOT_TARGET_DEVICES_MMC(func) #endif #ifdef CONFIG_CMD_USB -#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) +#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) #else #define BOOT_TARGET_DEVICES_USB(func) #endif @@ -152,15 +152,9 @@ # define BOOT_TARGET_DEVICES_NOR(func) #endif -#define BOOTENV_DEV_XILINX(devtypeu, devtypel, instance) \ - "bootcmd_xilinx=run $modeboot\0" - -#define BOOTENV_DEV_NAME_XILINX(devtypeu, devtypel, instance) \ - "xilinx " - #define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \ "bootcmd_qspi=sf probe 0 0 0 && " \ - "sf read $scriptaddr $script_offset_f $script_size_f && " \ + "sf read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \ "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" #define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \ @@ -168,14 +162,15 @@ #define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ "bootcmd_nand=nand info && " \ - "nand read $scriptaddr $script_offset_f $script_size_f && " \ + "nand read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \ "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" #define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ "nand " #define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \ - "bootcmd_nor=cp.b $scropt_offset_nor $scriptaddr $script_size_f && " \ + "script_offset_nor=0xE2FC0000\0" \ + "bootcmd_nor=cp.b ${script_offset_nor} ${scriptaddr} ${script_size_f} && " \ "source ${scriptaddr}; echo SCRIPT FAILED: continuing...;\0" #define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \ @@ -188,8 +183,7 @@ BOOT_TARGET_DEVICES_NOR(func) \ BOOT_TARGET_DEVICES_USB(func) \ BOOT_TARGET_DEVICES_PXE(func) \ - BOOT_TARGET_DEVICES_DHCP(func) \ - func(XILINX, xilinx, na) + BOOT_TARGET_DEVICES_DHCP(func) #include <config_distro_bootcmd.h> #endif /* CONFIG_SPL_BUILD */ @@ -197,72 +191,31 @@ /* Default environment */ #ifndef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ - "fit_image=fit.itb\0" \ - "load_addr=0x2000000\0" \ - "fit_size=0x800000\0" \ - "flash_off=0x100000\0" \ - "nor_flash_off=0xE2100000\0" \ "fdt_high=0x20000000\0" \ "initrd_high=0x20000000\0" \ "scriptaddr=0x20000\0" \ - "script_offser_nor=0xE2FC0000\0" \ "script_offset_f=0xFC0000\0" \ "script_size_f=0x40000\0" \ - "loadbootenv_addr=0x2000000\0" \ "fdt_addr_r=0x1f00000\0" \ "pxefile_addr_r=0x2000000\0" \ "kernel_addr_r=0x2000000\0" \ "scriptaddr=0x3000000\0" \ "ramdisk_addr_r=0x3100000\0" \ - "bootenv=uEnv.txt\0" \ - "bootenv_dev=mmc\0" \ - "loadbootenv=load ${bootenv_dev} 0 ${loadbootenv_addr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from ${bootenv_dev} ...; " \ - "env import -t ${loadbootenv_addr} $filesize\0" \ - "bootenv_existence_test=test -e ${bootenv_dev} 0 /${bootenv}\0" \ - "setbootenv=if env run bootenv_existence_test; then " \ - "if env run loadbootenv; then " \ - "env run importbootenv; " \ - "fi; " \ - "fi; \0" \ - "sd_loadbootenv=setenv bootenv_dev mmc && " \ - "run setbootenv \0" \ - "usb_loadbootenv=setenv bootenv_dev usb && usb start && run setbootenv \0" \ - "preboot=if test $modeboot = sdboot; then " \ - "run sd_loadbootenv; " \ - "echo Checking if uenvcmd is set ...; " \ - "if test -n $uenvcmd; then " \ - "echo Running uenvcmd ...; " \ - "run uenvcmd; " \ - "fi; " \ - "fi; \0" \ - "norboot=echo Copying FIT from NOR flash to RAM... && " \ - "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ - "bootm ${load_addr}\0" \ - "sdboot=echo Copying FIT from SD to RAM... && " \ - "load mmc 0 ${load_addr} ${fit_image} && " \ - "bootm ${load_addr}\0" \ - "jtagboot=echo TFTPing FIT to RAM... && " \ - "tftpboot ${load_addr} ${fit_image} && " \ - "bootm ${load_addr}\0" \ - "usbboot=if usb start; then " \ - "echo Copying FIT from USB to RAM... && " \ - "load usb 0 ${load_addr} ${fit_image} && " \ - "bootm ${load_addr}; fi\0" \ - DFU_ALT_INFO \ - BOOTENV + DFU_ALT_INFO \ + BOOTENV #endif /* Miscellaneous configurable options */ #define CONFIG_CLOCKS #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +#define CONFIG_SYS_CBSIZE 2048 /* Console I/O Buffer Size */ #define CONFIG_SYS_MEMTEST_START 0 #define CONFIG_SYS_MEMTEST_END 0x1000 #define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 +#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) @@ -274,6 +227,8 @@ /* Boot FreeBSD/vxWorks from an ELF image */ #define CONFIG_SYS_MMC_MAX_DEVICE 1 +#undef CONFIG_BOOTM_NETBSD + /* MMC support */ #ifdef CONFIG_MMC_SDHCI_ZYNQ #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 diff --git a/include/phy.h b/include/phy.h index f4530faeb9..e50f56b6eb 100644 --- a/include/phy.h +++ b/include/phy.h @@ -17,6 +17,11 @@ #include <phy_interface.h> #define PHY_FIXED_ID 0xa5a55a5a +/* + * There is no actual id for this. + * This is just a dummy id for gmii2rgmmi converter. + */ +#define PHY_GMII2RGMII_ID 0x5a5a5a5a #define PHY_MAX_ADDR 32 @@ -391,6 +396,7 @@ int phy_vitesse_init(void); int phy_xilinx_init(void); int phy_mscc_init(void); int phy_fixed_init(void); +int phy_xilinx_gmii2rgmii_init(void); int board_phy_config(struct phy_device *phydev); int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id); diff --git a/include/versalpl.h b/include/versalpl.h new file mode 100644 index 0000000000..b94c82e6e6 --- /dev/null +++ b/include/versalpl.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * (C) Copyright 2019 Xilinx, Inc, + * Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> + */ + +#ifndef _VERSALPL_H_ +#define _VERSALPL_H_ + +#include <xilinx.h> + +#define VERSAL_PM_LOAD_PDI 0x701 +#define VERSAL_PM_PDI_TYPE 0xF + +extern struct xilinx_fpga_op versal_op; + +#define XILINX_VERSAL_DESC \ +{ xilinx_versal, csu_dma, 1, &versal_op, 0, &versal_op } + +#endif /* _VERSALPL_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index af40befa52..ab4537becf 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -21,6 +21,7 @@ typedef enum { /* typedef xilinx_iface */ slave_selectmap, /* slave SelectMap (virtex2) */ devcfg, /* devcfg interface (zynq) */ csu_dma, /* csu_dma interface (zynqmp) */ + cfi, /* CFI interface(versal) */ max_xilinx_iface_type /* insert all new types before this */ } xilinx_iface; /* end, typedef xilinx_iface */ @@ -32,6 +33,7 @@ typedef enum { /* typedef xilinx_family */ xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ xilinx_zynqmp, /* ZynqMP Family */ + xilinx_versal, /* Versal Family */ max_xilinx_type /* insert all new types before this */ } xilinx_family; /* end, typedef xilinx_family */ diff --git a/include/zynqmp_firmware.h b/include/zynqmp_firmware.h new file mode 100644 index 0000000000..a20cbcdb86 --- /dev/null +++ b/include/zynqmp_firmware.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Xilinx Zynq MPSoC Firmware driver + * + * Copyright (C) 2018-2019 Xilinx, Inc. + */ + +#ifndef _ZYNQMP_FIRMWARE_H_ +#define _ZYNQMP_FIRMWARE_H_ + +enum pm_api_id { + PM_GET_API_VERSION = 1, + PM_SET_CONFIGURATION, + PM_SECURE_IMAGE = 45, +}; + +#define PM_SIP_SVC 0xc2000000 +#define ZYNQMP_SIP_SVC_PM_SECURE_IMG_LOAD \ + (PM_SIP_SVC + PM_SECURE_IMAGE) + +#define ZYNQMP_PM_VERSION_MAJOR 1 +#define ZYNQMP_PM_VERSION_MINOR 0 +#define ZYNQMP_PM_VERSION_MAJOR_SHIFT 16 +#define ZYNQMP_PM_VERSION_MINOR_MASK 0xFFFF + +#define ZYNQMP_PM_VERSION \ + ((ZYNQMP_PM_VERSION_MAJOR << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | \ + ZYNQMP_PM_VERSION_MINOR) + +#define ZYNQMP_PM_VERSION_INVALID ~0 + +#define PMUFW_V1_0 ((1 << ZYNQMP_PM_VERSION_MAJOR_SHIFT) | 0) + +unsigned int zynqmp_firmware_version(void); +void zynqmp_pmufw_load_config_object(const void *cfg_obj, size_t size); + +#endif /* _ZYNQMP_FIRMWARE_H_ */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 19209544a4..5402bc2f28 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -4361,5 +4361,4 @@ CONFIG_YAFFS_WINCE CONFIG_YELLOW_LED CONFIG_ZLT CONFIG_ZM7300 -CONFIG_ZYNQ_HISPD_BROKEN CONFIG_eTSEC_MDIO_BUS |