diff options
54 files changed, 1945 insertions, 3471 deletions
@@ -1,4 +1,11 @@ ====================================================================== +Changes since U-Boot 1.0.1: +====================================================================== + +* Add a common get_ram_size() function and modify the the + board-specific files to invoke that common implementation. + +====================================================================== Changes for U-Boot 1.0.1: ====================================================================== diff --git a/board/LEOX/elpt860/elpt860.c b/board/LEOX/elpt860/elpt860.c index 254497fd5c..c8bc41a9b1 100644 --- a/board/LEOX/elpt860/elpt860.c +++ b/board/LEOX/elpt860/elpt860.c @@ -53,89 +53,87 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF -const uint init_sdram_table[] = -{ - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x0FFCCC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, - 0xFFFFFC04, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, /* last */ - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, - 0xFFFFFC04, 0xFFFFFC04, 0x0FFFFC04, 0xFFFFFC04, /* last */ - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC34, 0x0FAC0C34, - 0xFFFFFC05, 0xFFFFFC04, 0x0FFCFC04, 0xFFFFFC05, /* last */ +const uint init_sdram_table[] = { + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x0FFCCC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, + 0xFFFFFC04, /* last */ + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, /* last */ + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, /* last */ + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, 0x0FFC3C04, + 0xFFFFFC04, 0xFFFFFC04, 0x0FFFFC04, 0xFFFFFC04, /* last */ + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC04, 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC34, 0x0FAC0C34, + 0xFFFFFC05, 0xFFFFFC04, 0x0FFCFC04, 0xFFFFFC05, /* last */ }; -const uint sdram_table[] = -{ - /* - * Single Read. (Offset 0 in UPMA RAM) - */ - 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, - 0xFF0FFC00, /* last */ - /* - * SDRAM Initialization (offset 5 in UPMA RAM) - * - * This is no UPM entry point. The following definition uses - * the remaining space to establish an initialization - * sequence, which is executed by a RUN command. - * - */ - 0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC05, /* last */ - /* - * Burst Read. (Offset 8 in UPMA RAM) - */ - 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, - 0xF00FFC00, 0xF00FFC00, 0xF00FFC00, 0xFF0FFC00, - 0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, - 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */ - /* - * Single Write. (Offset 18 in UPMA RAM) - */ - 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF0C00, - 0xFF0FFC04, 0x0FFCCC04, 0xFFAFFC05, /* last */ - _NOT_USED_, - /* - * Burst Write. (Offset 20 in UPMA RAM) - */ - 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC00, 0x00AF0C00, - 0xF00FFC00, 0xF00FFC00, 0xF00FFC04, 0x0FFCCC04, - 0xFFAFFC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, - 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */ - /* - * Refresh (Offset 30 in UPMA RAM) - */ - 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC05, 0xFFFFFC04, 0xFFFFFC05, _NOT_USED_, - 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */ - /* - * Exception. (Offset 3c in UPMA RAM) - */ - 0x0FFFFC34, 0x0FAC0C34, 0xFFFFFC05, 0xFFAFFC04, /* last */ +const uint sdram_table[] = { + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, + 0xFF0FFC00, /* last */ + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC05, /* last */ + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF3C04, + 0xF00FFC00, 0xF00FFC00, 0xF00FFC00, 0xFF0FFC00, + 0x0FFCCC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, + 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */ + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC04, 0x00AF0C00, + 0xFF0FFC04, 0x0FFCCC04, 0xFFAFFC05, /* last */ + _NOT_USED_, + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x0F0FFC24, 0x0F0CFC04, 0xFF0FFC00, 0x00AF0C00, + 0xF00FFC00, 0xF00FFC00, 0xF00FFC04, 0x0FFCCC04, + 0xFFAFFC04, 0xFFAFFC05, 0xFFAFFC04, 0xFFAFFC04, + 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */ + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x0FFC3C04, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC05, 0xFFFFFC04, 0xFFFFFC05, _NOT_USED_, + 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, 0xFFAFFC04, /* last */ + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x0FFFFC34, 0x0FAC0C34, 0xFFFFFC05, 0xFFAFFC04, /* last */ }; /* ------------------------------------------------------------------------- */ @@ -147,19 +145,18 @@ const uint sdram_table[] = /* * Very early board init code (fpga boot, etc.) */ -int -board_pre_init (void) +int board_pre_init (void) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; - /* - * Light up the red led on ELPT860 pcb (DS1) (PCDAT) - */ - immr->im_ioport.iop_pcdat &= ~CFG_DS1; /* PCDAT (DS1 = 0) */ - immr->im_ioport.iop_pcpar &= ~CFG_DS1; /* PCPAR (0=general purpose I/O) */ - immr->im_ioport.iop_pcdir |= CFG_DS1; /* PCDIR (I/O: 0=input, 1=output) */ + /* + * Light up the red led on ELPT860 pcb (DS1) (PCDAT) + */ + immr->im_ioport.iop_pcdat &= ~CFG_DS1; /* PCDAT (DS1 = 0) */ + immr->im_ioport.iop_pcpar &= ~CFG_DS1; /* PCPAR (0=general purpose I/O) */ + immr->im_ioport.iop_pcdir |= CFG_DS1; /* PCDIR (I/O: 0=input, 1=output) */ - return ( 0 ); /* success */ + return (0); /* success */ } /* @@ -170,150 +167,143 @@ board_pre_init (void) * Return 1 if no second DRAM bank, otherwise returns 0 */ -int -checkboard (void) +int checkboard (void) { - unsigned char *s = getenv("serial#"); + unsigned char *s = getenv ("serial#"); - if ( !s || strncmp(s, "ELPT860", 7) ) - printf ("### No HW ID - assuming ELPT860\n"); + if (!s || strncmp (s, "ELPT860", 7)) + printf ("### No HW ID - assuming ELPT860\n"); - return ( 0 ); /* success */ + return (0); /* success */ } /* ------------------------------------------------------------------------- */ -long int -initdram (int board_type) +long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size8, size9; - long int size_b0 = 0; - - /* - * This sequence initializes SDRAM chips on ELPT860 board - */ - upmconfig(UPMA, (uint *)init_sdram_table, - sizeof(init_sdram_table)/sizeof(uint)); - - memctl->memc_mptpr = 0x0200; - memctl->memc_mamr = 0x18002111; - - memctl->memc_mar = 0x00000088; - memctl->memc_mcr = 0x80002000; /* CS1: SDRAM bank 0 */ - - upmconfig(UPMA, (uint *)sdram_table, - sizeof(sdram_table)/sizeof(uint)); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CFG_MPTPR_2BK_8K; - - /* - * The following value is used as an address (i.e. opcode) for - * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If - * the port size is 32bit the SDRAM does NOT "see" the lower two - * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for - * MICRON SDRAMs: - * -> 0 00 010 0 010 - * | | | | +- Burst Length = 4 - * | | | +----- Burst Type = Sequential - * | | +------- CAS Latency = 2 - * | +----------- Operating Mode = Standard - * +-------------- Write Burst Mode = Programmed Burst Length - */ - memctl->memc_mar = 0x00000088; - - /* - * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - memctl->memc_or1 = CFG_OR1_PRELIM; - memctl->memc_br1 = CFG_BR1_PRELIM; - - memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - - udelay (200); - - /* perform SDRAM initializsation sequence */ - - memctl->memc_mcr = 0x80002105; /* CS1: SDRAM bank 0 */ - udelay (1); - memctl->memc_mcr = 0x80002230; /* CS1: SDRAM bank 0 - execute twice */ - udelay (1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - - udelay (1000); - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CFG_MAMR_8COL, - (ulong *) SDRAM_BASE1_PRELIM, - SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CFG_MAMR_9COL, - (ulong *) SDRAM_BASE1_PRELIM, - SDRAM_MAX_SIZE); - - if ( size8 < size9 ) /* leave configuration at 9 columns */ - { - size_b0 = size9; - /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } - else /* back to 8 columns */ - { - size_b0 = size8; - memctl->memc_mamr = CFG_MAMR_8COL; - udelay (500); - /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } - - udelay (1000); - - /* - * Adjust refresh rate depending on SDRAM type, both banks - * For types > 128 MBit leave it at the current (fast) rate - */ - if ( size_b0 < 0x02000000 ) - { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size8, size9; + long int size_b0 = 0; + + /* + * This sequence initializes SDRAM chips on ELPT860 board + */ + upmconfig (UPMA, (uint *) init_sdram_table, + sizeof (init_sdram_table) / sizeof (uint)); + + memctl->memc_mptpr = 0x0200; + memctl->memc_mamr = 0x18002111; + + memctl->memc_mar = 0x00000088; + memctl->memc_mcr = 0x80002000; /* CS1: SDRAM bank 0 */ + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + /* + * The following value is used as an address (i.e. opcode) for + * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If + * the port size is 32bit the SDRAM does NOT "see" the lower two + * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for + * MICRON SDRAMs: + * -> 0 00 010 0 010 + * | | | | +- Burst Length = 4 + * | | | +----- Burst Type = Sequential + * | | +------- CAS Latency = 2 + * | +----------- Operating Mode = Standard + * +-------------- Write Burst Mode = Programmed Burst Length + */ + memctl->memc_mar = 0x00000088; + + /* + * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ + memctl->memc_or1 = CFG_OR1_PRELIM; + memctl->memc_br1 = CFG_BR1_PRELIM; + + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80002105; /* CS1: SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80002230; /* CS1: SDRAM bank 0 - execute twice */ + udelay (1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + + udelay (1000); + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, + (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); + udelay (1000); - } - /* - * Final mapping: map bigger bank first - */ - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, + (ulong *) SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size_b0 = size9; + /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ + } else { /* back to 8 columns */ + + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); + /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ + } + + udelay (1000); + + /* + * Adjust refresh rate depending on SDRAM type, both banks + * For types > 128 MBit leave it at the current (fast) rate + */ + if (size_b0 < 0x02000000) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); + } + + /* + * Final mapping: map bigger bank first + */ + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - { - unsigned long reg; + { + unsigned long reg; - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; - } + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } - udelay(10000); + udelay (10000); - return (size_b0); + return (size_b0); } /* ------------------------------------------------------------------------- */ @@ -327,54 +317,14 @@ initdram (int board_type) */ static long int -dram_size (long int mamr_value, - long int *base, - long int maxsize) +dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) - { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - /* check at base address */ - if ( (val = *addr) != 0 ) - { - *addr = save[i]; - - return (0); - } - - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) - { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if ( val != (~cnt) ) - { - return (cnt * sizeof(long)); - } - } + memctl->memc_mamr = mamr_value; - return (maxsize); + return (get_ram_size (base, maxsize)); } /* ------------------------------------------------------------------------- */ @@ -384,16 +334,15 @@ dram_size (long int mamr_value, #define CFG_LBKs (CFG_PA2 | CFG_PA1) -void -reset_phy (void) +void reset_phy (void) { - volatile immap_t *immr = (immap_t *) CFG_IMMR; - - /* - * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect - * and no AUI loopback - */ - immr->im_ioport.iop_padat &= ~CFG_LBKs; /* PADAT (LBK eth 1&2 = 0) */ - immr->im_ioport.iop_papar &= ~CFG_LBKs; /* PAPAR (0=general purpose I/O) */ - immr->im_ioport.iop_padir |= CFG_LBKs; /* PADIR (I/O: 0=input, 1=output) */ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + + /* + * Ensure LBK LXT901 ethernet 1 & 2 = 0 ... for normal loopback in effect + * and no AUI loopback + */ + immr->im_ioport.iop_padat &= ~CFG_LBKs; /* PADAT (LBK eth 1&2 = 0) */ + immr->im_ioport.iop_papar &= ~CFG_LBKs; /* PAPAR (0=general purpose I/O) */ + immr->im_ioport.iop_padir |= CFG_LBKs; /* PADIR (I/O: 0=input, 1=output) */ } diff --git a/board/RPXClassic/RPXClassic.c b/board/RPXClassic/RPXClassic.c index 5689334ad0..5b12a0c04c 100644 --- a/board/RPXClassic/RPXClassic.c +++ b/board/RPXClassic/RPXClassic.c @@ -220,42 +220,10 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /*----------------------------------------------------------------------------- * aschex_to_byte -- diff --git a/board/RPXlite/RPXlite.c b/board/RPXlite/RPXlite.c index a33357bc37..d2c2116c12 100644 --- a/board/RPXlite/RPXlite.c +++ b/board/RPXlite/RPXlite.c @@ -40,20 +40,19 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFCC25 -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 00h in UPMA RAM) */ 0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08, - 0x3FBFCC27, /* last */ + 0x3FBFCC27, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Read. (Offset 08h in UPMA RAM) */ 0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88, - 0x3FBFCC27, /* last */ + 0x3FBFCC27, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, @@ -62,14 +61,14 @@ const uint sdram_table[] = * Single Write. (Offset 18h in UPMA RAM) */ 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00, - 0x3FFFCC27, /* last */ + 0x3FFFCC27, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20h in UPMA RAM) */ 0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C, - 0x0CFFCC00, 0x33FFCC27, /* last */ + 0x0CFFCC00, 0x33FFCC27, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, @@ -78,7 +77,7 @@ const uint sdram_table[] = * Refresh. (Offset 30h in UPMA RAM) */ 0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24, - 0x3FFFCC27, /* last */ + 0x3FFFCC27, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, @@ -97,49 +96,51 @@ const uint sdram_table[] = int checkboard (void) { - puts ("Board: RPXlite\n") ; - return (0) ; + puts ("Board: RPXlite\n"); + return (0); } /* ------------------------------------------------------------------------- */ long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size10 ; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size10; - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); /* Refresh clock prescalar */ - memctl->memc_mptpr = CFG_MPTPR ; + memctl->memc_mptpr = CFG_MPTPR; - memctl->memc_mar = 0x00000000; + memctl->memc_mar = 0x00000000; /* Map controller banks 1 to the SDRAM bank */ - memctl->memc_or1 = CFG_OR1_PRELIM; - memctl->memc_br1 = CFG_BR1_PRELIM; + memctl->memc_or1 = CFG_OR1_PRELIM; + memctl->memc_br1 = CFG_BR1_PRELIM; - memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CFG_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */ - udelay(200); + udelay (200); - /* perform SDRAM initializsation sequence */ + /* perform SDRAM initializsation sequence */ - memctl->memc_mcr = 0x80002230 ; /* SDRAM bank 0 - refresh twice */ - udelay(1); + memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */ + udelay (1); - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - udelay (1000); + udelay (1000); /* Check Bank 0 Memory Size * try 10 column mode */ - size10 = dram_size (CFG_MAMR_10COL, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE) ; + size10 = dram_size (CFG_MAMR_10COL, (ulong *) SDRAM_BASE_PRELIM, + SDRAM_MAX_SIZE); - return (size10); + return (size10); } /* ------------------------------------------------------------------------- */ @@ -152,44 +153,13 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - val = *addr; - *addr = save[--i]; + memctl->memc_mamr = mamr_value; - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } diff --git a/board/RRvision/RRvision.c b/board/RRvision/RRvision.c index 8ed561d87b..d12ea82686 100644 --- a/board/RRvision/RRvision.c +++ b/board/RRvision/RRvision.c @@ -229,53 +229,8 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val, size; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (size); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } diff --git a/board/a3000/a3000.c b/board/a3000/a3000.c index efc95a30e8..ab707ae970 100644 --- a/board/a3000/a3000.c +++ b/board/a3000/a3000.c @@ -40,50 +40,24 @@ int checkboard (void) long int initdram (int board_type) { - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; + long size; + long new_bank0_end; + long mear1; + long emear1; - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + return (size); } /* diff --git a/board/atc/atc.c b/board/atc/atc.c index fad7646afd..d2c6b3bfcd 100644 --- a/board/atc/atc.c +++ b/board/atc/atc.c @@ -269,13 +269,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; - ulong cnt, val, size; - volatile ulong *addr; volatile uint *sdmr_ptr; volatile uint *orx_ptr; + ulong maxsize, size; int i; - ulong save[32]; /* to make test non-destructive */ - ulong maxsize; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be @@ -325,54 +322,11 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; - /* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - i = 0; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size((long *)base, maxsize); - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; - - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } + *orx_ptr = orx | ~(size - 1); - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - /* Write the actual size to ORx - */ - *orx_ptr = orx | ~(size - 1); - return (size); - } - } - return (maxsize); + return (size); } int misc_init_r(void) diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c index 0fdcebe373..873ff8ccee 100644 --- a/board/c2mon/c2mon.c +++ b/board/c2mon/c2mon.c @@ -227,53 +227,8 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val, size; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (size); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c index 08bff49c2c..455cc12d00 100644 --- a/board/cpc45/cpc45.c +++ b/board/cpc45/cpc45.c @@ -60,51 +60,24 @@ int checkboard(void) long int initdram(int board_type) { - int i, cnt; - volatile uchar * base = CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + long size; + long new_bank0_end; + long mear1; + long emear1; + + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + return (size); } /* diff --git a/board/cpu86/cpu86.c b/board/cpu86/cpu86.c index 9477a15fbb..3eb5b35426 100644 --- a/board/cpu86/cpu86.c +++ b/board/cpu86/cpu86.c @@ -213,13 +213,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; - ulong cnt, val; - volatile ulong *addr; volatile uint *sdmr_ptr; volatile uint *orx_ptr; + ulong maxsize, size; int i; - ulong save[32]; /* to make test non-destructive */ - ulong maxsize; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be @@ -269,41 +266,11 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; - /* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - i = 0; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size((long *)base, maxsize); - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; + *orx_ptr = orx | ~(size - 1); - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - /* Write the actual size to ORx - */ - *orx_ptr = orx | ~(cnt * sizeof (long) - 1); - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (size); } long int initdram (int board_type) diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c index f960ce51ea..5844a5cf32 100644 --- a/board/cu824/cu824.c +++ b/board/cu824/cu824.c @@ -47,50 +47,24 @@ int checkboard (void) long int initdram(int board_type) { - int i, cnt; - volatile uchar * base = CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + long size; + long new_bank0_end; + long mear1; + long emear1; + + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + return (size); } /* diff --git a/board/esteem192e/esteem192e.c b/board/esteem192e/esteem192e.c index 986964b61c..f080d6731c 100644 --- a/board/esteem192e/esteem192e.c +++ b/board/esteem192e/esteem192e.c @@ -30,20 +30,15 @@ /* ------------------------------------------------------------------------- */ -static long int dram_size ( long int *base, long int maxsize); - -/* ------------------------------------------------------------------------- */ - #define _NOT_USED_ 0xFFFFFFFF -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) * * active, NOP, read, precharge, NOP */ 0x0F27CC04, 0x0EAECC04, 0x00B98C04, 0x00F74C00, - 0x11FFCC05, /* last */ + 0x11FFCC05, /* last */ /* * SDRAM Initialization (offset 5 in UPMA RAM) * @@ -52,42 +47,42 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * NOP, Program */ - 0x0F0A8C34, 0x1F354C37, /* last */ + 0x0F0A8C34, 0x1F354C37, /* last */ - _NOT_USED_, /* Not used */ + _NOT_USED_, /* Not used */ /* * Burst Read. (Offset 8 in UPMA RAM) * active, NOP, read, NOP, NOP, NOP, NOP, NOP */ 0x0F37CC04, 0x0EFECC04, 0x00FDCC04, 0x00FFCC00, - 0x00FFCC00, 0x01FFCC00, 0x0FFFCC00, 0x1FFFCC05, /* last */ + 0x00FFCC00, 0x01FFCC00, 0x0FFFCC00, 0x1FFFCC05, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) * active, NOP, write, NOP, precharge, NOP */ 0x0F27CC04, 0x0EAE8C00, 0x01BD4C04, 0x0FFB8C04, - 0x0FF74C04, 0x1FFFCC05, /* last */ + 0x0FF74C04, 0x1FFFCC05, /* last */ _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) * active, NOP, write, NOP, NOP, NOP, NOP, NOP */ 0x0F37CC04, 0x0EFE8C00, 0x00FD4C00, 0x00FFCC00, - 0x00FFCC00, 0x01FFCC04, 0x0FFFCC04, 0x1FFFCC05, /* last */ + 0x00FFCC00, 0x01FFCC04, 0x0FFFCC04, 0x1FFFCC05, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) * precharge, NOP, auto_ref, NOP, NOP, NOP */ 0x0FF74C34, 0x0FFACCB4, 0x0FF5CC34, 0x0FFFCC34, - 0x0FFFCCB4, 0x1FFFCC35, /* last */ - _NOT_USED_, _NOT_USED_, + 0x0FFFCCB4, 0x1FFFCC35, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ - 0x0FFB8C00, 0x1FF74C03, /* last */ - _NOT_USED_, _NOT_USED_ + 0x0FFB8C00, 0x1FF74C03, /* last */ + _NOT_USED_, _NOT_USED_ }; /* ------------------------------------------------------------------------- */ @@ -99,8 +94,8 @@ const uint sdram_table[] = int checkboard (void) { - puts ("Board: Esteem 192E\n"); - return(0); + puts ("Board: Esteem 192E\n"); + return (0); } /* ------------------------------------------------------------------------- */ @@ -108,209 +103,141 @@ int checkboard (void) long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0, size_b1; - - /* - * Explain frequency of refresh here - */ - - memctl->memc_mptpr = 0x0200; /* divide by 32 */ - - memctl->memc_mamr = 0x18003112; /*CFG_MAMR_8COL;*/ /* 0x18005112 TODO: explain here */ - - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0, size_b1; - /* - * Map cs 2 and 3 to the SDRAM banks 0 and 1 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - - memctl->memc_or2 = CFG_OR2_PRELIM; /* not defined yet */ - memctl->memc_br2 = CFG_BR2_PRELIM; + /* + * Explain frequency of refresh here + */ - memctl->memc_or3 = CFG_OR3_PRELIM; - memctl->memc_br3 = CFG_BR3_PRELIM; + memctl->memc_mptpr = 0x0200; /* divide by 32 */ + memctl->memc_mamr = 0x18003112; /*CFG_MAMR_8COL; *//* 0x18005112 TODO: explain here */ - /* perform SDRAM initializsation sequence */ - memctl->memc_mar = 0x00000088; + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mcr = 0x80004830; /* SDRAM bank 0 execute 8 refresh */ + /* + * Map cs 2 and 3 to the SDRAM banks 0 and 1 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ - memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + memctl->memc_or2 = CFG_OR2_PRELIM; /* not defined yet */ + memctl->memc_br2 = CFG_BR2_PRELIM; + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; - memctl->memc_mcr = 0x80006830; /* SDRAM bank 1 execute 8 refresh */ - memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */ + /* perform SDRAM initializsation sequence */ + memctl->memc_mar = 0x00000088; + memctl->memc_mcr = 0x80004830; /* SDRAM bank 0 execute 8 refresh */ + memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + memctl->memc_mcr = 0x80006830; /* SDRAM bank 1 execute 8 refresh */ + memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */ - memctl->memc_mamr = CFG_MAMR_8COL; /* 0x18803112 start refresh timer TODO: explain here */ + memctl->memc_mamr = CFG_MAMR_8COL; /* 0x18803112 start refresh timer TODO: explain here */ /* printf ("banks 0 and 1 are programed\n"); */ - /* - * Check Bank 0 Memory Size for re-configuration - * - */ - - size_b0 = dram_size ((ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); - - size_b1 = dram_size ((ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - - printf ("\nbank 0 size %lu\nbank 1 size %lu\n",size_b0,size_b1); + /* + * Check Bank 0 Memory Size for re-configuration + * + */ + size_b0 = get_ram_size ((ulong *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); + size_b1 = get_ram_size ((ulong *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); + printf ("\nbank 0 size %lu\nbank 1 size %lu\n", size_b0, size_b1); /* printf ("bank 1 size %u\n",size_b1); */ - if(size_b1 == 0) { - - /* - * Adjust refresh rate if bank 0 isn't stuffed - */ - - memctl->memc_mptpr = 0x0400; /* divide by 64 */ - memctl->memc_br3 &= 0x0FFFFFFFE; - - /* - * Adjust OR2 for size of bank 0 - */ - memctl->memc_or2 |= 7 * size_b0; - - } - - else { - - if(size_b0 < size_b1) { - memctl->memc_br2 &= 0x00007FFE; - memctl->memc_br3 &= 0x00007FFF; - - /* - * Adjust OR3 for size of bank 1 - */ - memctl->memc_or3 |= 15 * size_b1; - - /* - * Adjust OR2 for size of bank 0 - */ - memctl->memc_or2 |= 15 * size_b0; - - memctl->memc_br2 += (size_b1 + 1); - - } - else { - - memctl->memc_br3 &= 0x00007FFE; - - - /* - * Adjust OR2 for size of bank 0 - */ - memctl->memc_or2 |= 15 * size_b0; - - /* - * Adjust OR3 for size of bank 1 - */ - memctl->memc_or3 |= 15 * size_b1; - - memctl->memc_br3 += (size_b0 + 1); - - - } - } - - -/* before leaving set all unused i/o pins to outputs */ - -/* - * --*Unused Pin List*-- - * - * group/port bit number - * IP_B 0,1,3,4,5 Taken care of in pcmcia-cs-x.x.xx - * PA 5,7,8,9,14,15 - * PB 22,23,31 - * PC 4,5,6,7,10,11,12,13,14,15 - * PD 5,6,7 - * - */ - -/* - * --*Pin Used for I/O List*-- - * - * port input bit number output bit number either - * PB 18,26,27 - * PD 3,4 8,9,10,11,12,13,14,15 - * - */ - - - immap->im_ioport.iop_papar &= ~0x05C3; /* set pins as io */ - immap->im_ioport.iop_padir |= 0x05C3; /* set pins as output */ - immap->im_ioport.iop_paodr &= 0x0008; /* config pins 9 & 14 as normal outputs */ - immap->im_ioport.iop_padat |= 0x05C3; /* set unused pins as high */ - - immap->im_cpm.cp_pbpar &= ~0x00001331; /* set unused port b pins as io */ - immap->im_cpm.cp_pbdir |= 0x00001331; /* set unused port b pins as output */ - immap->im_cpm.cp_pbodr &= ~0x00001331; /* config bits 18,22,23,26,27 & 31 as normal outputs */ - immap->im_cpm.cp_pbdat |= 0x00001331; /* set T/E LED, /NV_CS, & /POWER_ADJ_CS and the rest to a high */ - - immap->im_ioport.iop_pcpar &= ~0x0F3F; /* set unused port c pins as io */ - immap->im_ioport.iop_pcdir |= 0x0F3F; /* set unused port c pins as output */ - immap->im_ioport.iop_pcso &= ~0x0F3F; /* clear special purpose bit for unused port c pins for clarity */ - immap->im_ioport.iop_pcdat |= 0x0F3F; /* set unused port c pins high*/ - - immap->im_ioport.iop_pdpar &= 0xE000; /* set pins as io */ - immap->im_ioport.iop_pddir &= 0xE000; /* set bit 3 & 4 as inputs */ - immap->im_ioport.iop_pddir |= 0x07FF; /* set bits 5 - 15 as outputs */ - immap->im_ioport.iop_pddat = 0x0055; /* set alternating pattern on test port */ - - - return (size_b0 + size_b1); -} - -/* ------------------------------------------------------------------------- */ - -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size ( long int *base, long int maxsize) -{ + if (size_b1 == 0) { + /* + * Adjust refresh rate if bank 0 isn't stuffed + */ + memctl->memc_mptpr = 0x0400; /* divide by 64 */ + memctl->memc_br3 &= 0x0FFFFFFFE; + + /* + * Adjust OR2 for size of bank 0 + */ + memctl->memc_or2 |= 7 * size_b0; + } else { + if (size_b0 < size_b1) { + memctl->memc_br2 &= 0x00007FFE; + memctl->memc_br3 &= 0x00007FFF; + + /* + * Adjust OR3 for size of bank 1 + */ + memctl->memc_or3 |= 15 * size_b1; + + /* + * Adjust OR2 for size of bank 0 + */ + memctl->memc_or2 |= 15 * size_b0; + memctl->memc_br2 += (size_b1 + 1); + } else { + memctl->memc_br3 &= 0x00007FFE; + + /* + * Adjust OR2 for size of bank 0 + */ + memctl->memc_or2 |= 15 * size_b0; + + /* + * Adjust OR3 for size of bank 1 + */ + memctl->memc_or3 |= 15 * size_b1; + memctl->memc_br3 += (size_b0 + 1); + } + } - volatile long int *addr; - long int cnt, val; + /* before leaving set all unused i/o pins to outputs */ - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ + /* + * --*Unused Pin List*-- + * + * group/port bit number + * IP_B 0,1,3,4,5 Taken care of in pcmcia-cs-x.x.xx + * PA 5,7,8,9,14,15 + * PB 22,23,31 + * PC 4,5,6,7,10,11,12,13,14,15 + * PD 5,6,7 + * + */ - *addr = ~cnt; - } + /* + * --*Pin Used for I/O List*-- + * + * port input bit number output bit number either + * PB 18,26,27 + * PD 3,4 8,9,10,11,12,13,14,15 + * + */ - /* write 0 to base address */ - addr = base; - *addr = 0; + immap->im_ioport.iop_papar &= ~0x05C3; /* set pins as io */ + immap->im_ioport.iop_padir |= 0x05C3; /* set pins as output */ + immap->im_ioport.iop_paodr &= 0x0008; /* config pins 9 & 14 as normal outputs */ + immap->im_ioport.iop_padat |= 0x05C3; /* set unused pins as high */ - /* check at base address */ - if ((val = *addr) != 0) { - return (0); - } + immap->im_cpm.cp_pbpar &= ~0x00001331; /* set unused port b pins as io */ + immap->im_cpm.cp_pbdir |= 0x00001331; /* set unused port b pins as output */ + immap->im_cpm.cp_pbodr &= ~0x00001331; /* config bits 18,22,23,26,27 & 31 as normal outputs */ + immap->im_cpm.cp_pbdat |= 0x00001331; /* set T/E LED, /NV_CS, & /POWER_ADJ_CS and the rest to a high */ - for (cnt = 1; ; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + immap->im_ioport.iop_pcpar &= ~0x0F3F; /* set unused port c pins as io */ + immap->im_ioport.iop_pcdir |= 0x0F3F; /* set unused port c pins as output */ + immap->im_ioport.iop_pcso &= ~0x0F3F; /* clear special purpose bit for unused port c pins for clarity */ + immap->im_ioport.iop_pcdat |= 0x0F3F; /* set unused port c pins high */ - val = *addr; + immap->im_ioport.iop_pdpar &= 0xE000; /* set pins as io */ + immap->im_ioport.iop_pddir &= 0xE000; /* set bit 3 & 4 as inputs */ + immap->im_ioport.iop_pddir |= 0x07FF; /* set bits 5 - 15 as outputs */ + immap->im_ioport.iop_pddat = 0x0055; /* set alternating pattern on test port */ - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - /* NOTREACHED */ + return (size_b0 + size_b1); } diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c index fe075f1fce..f7851b3c2b 100644 --- a/board/etin/debris/debris.c +++ b/board/etin/debris/debris.c @@ -52,50 +52,28 @@ int checkflash (void) long int initdram (int board_type) { - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } + long size; +#if 0 + long new_bank0_end; + long mear1; + long emear1; +#endif - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { -/* ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1);*/ - - ret = cnt * sizeof(long); - goto Done; - } - } + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + +#if 0 + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); +#endif - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + return (size); } /* diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c index e52ca85741..efe7cb2151 100644 --- a/board/etx094/etx094.c +++ b/board/etx094/etx094.c @@ -320,55 +320,10 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val, size; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (size); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/fads/fads.c b/board/fads/fads.c index 3083740452..1507146366 100644 --- a/board/fads/fads.c +++ b/board/fads/fads.c @@ -187,45 +187,6 @@ static const uint edo_70ns[] = #endif /* ------------------------------------------------------------------------- */ -static long int dram_size (long int *base, long int maxsize) -{ - volatile long int *addr=base; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} - -/* ------------------------------------------------------------------------- */ static int _draminit (uint base, uint noMbytes, uint edo, uint delay) { volatile immap_t *immap = (immap_t *) CFG_IMMR; @@ -306,10 +267,10 @@ static int _draminit (uint base, uint noMbytes, uint edo, uint delay) /* if no dimm is inserted, noMbytes is still detected as 8m, so * sanity check top and bottom of memory */ - /* check bytes / 2 because dram_size tests at base+bytes, which + /* check bytes / 2 because get_ram_size tests at base+bytes, which * is not mapped */ if (noMbytes == 8) - if (dram_size ((long *) base, noMbytes << 19) != noMbytes << 19) { + if (get_ram_size ((long *) base, noMbytes << 19) != noMbytes << 19) { *((uint *) BCSR1) |= BCSR1_DRAM_EN; /* disable dram */ return -1; } diff --git a/board/genietv/genietv.c b/board/genietv/genietv.c index 3bfb25e9b8..c19841ae79 100644 --- a/board/genietv/genietv.c +++ b/board/genietv/genietv.c @@ -39,13 +39,12 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMB RAM) */ 0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBEEC00, - 0x1FFDDC47, /* last */ + 0x1FFDDC47, /* last */ /* * SDRAM Initialization (offset 5 in UPMB RAM) * @@ -54,39 +53,39 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1FFDDC34, 0xEFEEAC34, 0x1FBD5C35, /* last */ + 0x1FFDDC34, 0xEFEEAC34, 0x1FBD5C35, /* last */ /* * Burst Read. (Offset 8 in UPMB RAM) */ 0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBEEC00, 0x1FFDDC47, /* last */ + 0xF0AFFC00, 0xF1AFFC00, 0xEFBEEC00, 0x1FFDDC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMB RAM) */ - 0x1F2DFC04, 0xEEAFAC00, 0x01BE4C04, 0x1FFDDC47, /* last */ + 0x1F2DFC04, 0xEEAFAC00, 0x01BE4C04, 0x1FFDDC47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMB RAM) */ 0x1F0DFC04, 0xEEAFAC00, 0x10AF5C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BEEC04, 0x1FFDDC47, /* last */ - _NOT_USED_, + 0xF0AFFC00, 0xE1BEEC04, 0x1FFDDC47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMB RAM) */ 0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMB RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -98,19 +97,22 @@ const uint sdram_table[] = int checkboard (void) { - puts ("Board: GenieTV\n"); - return 0; + puts ("Board: GenieTV\n"); + return 0; } #if 0 -static void PrintState(void) +static void PrintState (void) { - volatile immap_t *im = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &im->im_memctl; - - printf("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0, memctl->memc_or0); - printf("\n1 - SDRAM: B=%08x O=%08x", memctl->memc_br1, memctl->memc_or1); - printf("\n2 - SDRAM: B=%08x O=%08x", memctl->memc_br2, memctl->memc_or2); + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &im->im_memctl; + + printf ("\n0 - FLASH: B=%08x O=%08x", memctl->memc_br0, + memctl->memc_or0); + printf ("\n1 - SDRAM: B=%08x O=%08x", memctl->memc_br1, + memctl->memc_or1); + printf ("\n2 - SDRAM: B=%08x O=%08x", memctl->memc_br2, + memctl->memc_or2); } #endif @@ -118,119 +120,123 @@ static void PrintState(void) long int initdram (int board_type) { - volatile immap_t *im = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &im->im_memctl; - long int size_b0, size_b1, size8; + volatile immap_t *im = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &im->im_memctl; + long int size_b0, size_b1, size8; - /* Enable SDRAM */ + /* Enable SDRAM */ - /* Configuring PA7 for general purpouse output pin */ - im->im_ioport.iop_papar &= ~CFG_PA7 ; /* 0 = general purpouse */ - im->im_ioport.iop_padir |= CFG_PA7 ; /* 1 = output */ + /* Configuring PA7 for general purpouse output pin */ + im->im_ioport.iop_papar &= ~CFG_PA7; /* 0 = general purpouse */ + im->im_ioport.iop_padir |= CFG_PA7; /* 1 = output */ - /* Enable SDRAM - PA7 = 1 */ - im->im_ioport.iop_padat |= CFG_PA7 ; /* value of PA7 */ + /* Enable SDRAM - PA7 = 1 */ + im->im_ioport.iop_padat |= CFG_PA7; /* value of PA7 */ - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K ; + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; - memctl->memc_mbmr = CFG_MBMR_8COL; + memctl->memc_mbmr = CFG_MBMR_8COL; - upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + upmconfig (UPMB, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); - /* - * Map controller banks 1 and 2 to the SDRAM banks 1 and 2 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ + /* + * Map controller banks 1 and 2 to the SDRAM banks 1 and 2 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ - memctl->memc_or1 = 0xF0000000 | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V); + memctl->memc_or1 = 0xF0000000 | CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = + ((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V); - memctl->memc_or2 = 0xF0000000 | CFG_OR_TIMING_SDRAM; - memctl->memc_br2 = ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V); + memctl->memc_or2 = 0xF0000000 | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMB | BR_V); - /* perform SDRAM initialization sequence */ - memctl->memc_mar = 0x00000088; + /* perform SDRAM initialization sequence */ + memctl->memc_mar = 0x00000088; - memctl->memc_mcr = 0x80802105; /* SDRAM bank 0 */ + memctl->memc_mcr = 0x80802105; /* SDRAM bank 0 */ - memctl->memc_mcr = 0x80804105; /* SDRAM bank 1 */ + memctl->memc_mcr = 0x80804105; /* SDRAM bank 1 */ - /* Execute refresh 8 times */ - memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X ; + /* Execute refresh 8 times */ + memctl->memc_mbmr = (CFG_MBMR_8COL & ~MBMR_TLFB_MSK) | MBMR_TLFB_8X; - memctl->memc_mcr = 0x80802130; /* SDRAM bank 0 - execute twice */ + memctl->memc_mcr = 0x80802130; /* SDRAM bank 0 - execute twice */ - memctl->memc_mcr = 0x80804130; /* SDRAM bank 1 - execute twice */ + memctl->memc_mcr = 0x80804130; /* SDRAM bank 1 - execute twice */ - /* Execute refresh 4 times */ - memctl->memc_mbmr = CFG_MBMR_8COL; + /* Execute refresh 4 times */ + memctl->memc_mbmr = CFG_MBMR_8COL; - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ #if 0 - PrintState(); + PrintState (); #endif /* printf ("\nChecking bank1..."); */ - size8 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); + size8 = dram_size (CFG_MBMR_8COL, (ulong *) SDRAM_BASE1_PRELIM, + SDRAM_MAX_SIZE); - size_b0 = size8 ; + size_b0 = size8; /* printf ("\nChecking bank2..."); */ - size_b1 = dram_size (memctl->memc_mbmr, (ulong *)SDRAM_BASE2_PRELIM,SDRAM_MAX_SIZE); + size_b1 = + dram_size (memctl->memc_mbmr, (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); - /* - * Final mapping: map bigger bank first - */ - - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; - - if (size_b1 > 0) - { - /* - * Position Bank 1 immediately above Bank 0 - */ - memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) + - (size_b0 & BR_BA_MSK); - } - else - { /* - * No bank 1 - * - * invalidate bank + * Final mapping: map bigger bank first */ - memctl->memc_br2 = 0; - /* adjust refresh rate depending on SDRAM type, one bank */ - memctl->memc_mptpr = CFG_MPTPR_1BK_4K; - } - - /* If no memory detected, disable SDRAM */ - if ((size_b0 + size_b1) == 0) - { - printf("disabling SDRAM!\n"); - /* Disable SDRAM - PA7 = 1 */ - im->im_ioport.iop_padat &= ~CFG_PA7 ; /* value of PA7 */ - } + + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V; + + if (size_b1 > 0) { + /* + * Position Bank 1 immediately above Bank 0 + */ + memctl->memc_or2 = + ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMB | BR_V) + + (size_b0 & BR_BA_MSK); + } else { + /* + * No bank 1 + * + * invalidate bank + */ + memctl->memc_br2 = 0; + /* adjust refresh rate depending on SDRAM type, one bank */ + memctl->memc_mptpr = CFG_MPTPR_1BK_4K; + } + + /* If no memory detected, disable SDRAM */ + if ((size_b0 + size_b1) == 0) { + printf ("disabling SDRAM!\n"); + /* Disable SDRAM - PA7 = 1 */ + im->im_ioport.iop_padat &= ~CFG_PA7; /* value of PA7 */ + } /* else */ /* printf("done! (%08lx)\n", size_b0 + size_b1); */ #if 0 - PrintState(); + PrintState (); #endif - return (size_b0 + size_b1); + return (size_b0 + size_b1); } /* ------------------------------------------------------------------------- */ @@ -243,57 +249,39 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mbmr_value, long int *base, long int maxsize) +static long int dram_size (long int mbmr_value, long int *base, + long int maxsize) { - volatile long int *addr; - long int cnt, val; - - /*memctl->memc_mbmr = mbmr_value; */ + long size; - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ + /*memctl->memc_mbmr = mbmr_value; */ - *addr = ~cnt; - } + size = get_ram_size (base, maxsize); - /* write 0 to base address */ - addr = base; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - printf("(0)"); - return (0); - } - - for (cnt = 1; ; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - if (val != (~cnt)) { -/* printf("(%08lx)", cnt*sizeof(long)); */ - return (cnt * sizeof(long)); + if (size) { +/* printf("(%08lx)", size); */ + } else { + printf ("(0)"); } - } - /* NOTREACHED */ - return (0); + + return (size); } #if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) #ifdef CFG_PCMCIA_MEM_ADDR -volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR; +volatile unsigned char *pcmcia_mem = (unsigned char *) CFG_PCMCIA_MEM_ADDR; #endif -int pcmcia_init(void) +int pcmcia_init (void) { - volatile pcmconf8xx_t *pcmp; + volatile pcmconf8xx_t *pcmp; uint v, slota, slotb; /* - ** Enable the PCMCIA for a Flash card. - */ - pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia)); + ** Enable the PCMCIA for a Flash card. + */ + pcmp = (pcmconf8xx_t *) (&(((immap_t *) CFG_IMMR)->im_pcmcia)); #if 0 pcmp->pcmc_pbr0 = CFG_PCMCIA_MEM_ADDR; @@ -311,12 +299,11 @@ int pcmcia_init(void) #endif /* Check if any PCMCIA card is luged in. */ - slota = (pcmp->pcmc_pipr & 0x18000000) == 0 ; - slotb = (pcmp->pcmc_pipr & 0x00001800) == 0 ; + slota = (pcmp->pcmc_pipr & 0x18000000) == 0; + slotb = (pcmp->pcmc_pipr & 0x00001800) == 0; - if (!(slota || slotb)) - { - printf("No card present\n"); + if (!(slota || slotb)) { + printf ("No card present\n"); #ifdef PCMCIA_SLOT_A pcmp->pcmc_pgcra = 0; #endif @@ -324,52 +311,50 @@ int pcmcia_init(void) pcmp->pcmc_pgcrb = 0; #endif return -1; - } - else - printf("Unknown card ("); + } else + printf ("Unknown card ("); v = 0; - switch( (pcmp->pcmc_pipr >> 14) & 3 ) - { - case 0x00 : - printf("5V"); - v = 5; - break; - case 0x01 : - printf("5V and 3V"); - v = 3; - break; - case 0x03 : - printf("5V, 3V and x.xV"); - v = 3; - break; + switch ((pcmp->pcmc_pipr >> 14) & 3) { + case 0x00: + printf ("5V"); + v = 5; + break; + case 0x01: + printf ("5V and 3V"); + v = 3; + break; + case 0x03: + printf ("5V, 3V and x.xV"); + v = 3; + break; } - switch(v){ + switch (v) { case 3: - printf("; using 3V"); - /* Enable 3 volt Vcc. */ + printf ("; using 3V"); + /* Enable 3 volt Vcc. */ - break; + break; default: - printf("; unknown voltage"); + printf ("; unknown voltage"); return -1; } - printf(")\n"); + printf (")\n"); /* disable pcmcia reset after a while */ - udelay(20); + udelay (20); pcmp->pcmc_pgcrb = 0; /* If you using a real hd you should give a short - * spin-up time. */ + * spin-up time. */ #ifdef CONFIG_DISK_SPINUP_TIME - udelay(CONFIG_DISK_SPINUP_TIME); + udelay (CONFIG_DISK_SPINUP_TIME); #endif return 0; } -#endif /* CFG_CMD_PCMCIA */ +#endif /* CFG_CMD_PCMCIA */ diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c index 97a7745708..7490324cb0 100644 --- a/board/hermes/hermes.c +++ b/board/hermes/hermes.c @@ -225,42 +225,10 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 27b7bab52e..3c9e4eeb6e 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -26,44 +26,6 @@ #include <pci.h> #ifndef CFG_RAMBOOT -static long int dram_size(long int *base, long int maxsize) -{ - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} - static void sdram_start (int hi_addr) { long hi_addr_bit = hi_addr ? 0x01000000 : 0; @@ -148,9 +110,9 @@ long int initdram (int board_type) *(vu_long *)MPC5XXX_SDRAM_XLBSEL = 0x03000000; #endif sdram_start(0); - test1 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); sdram_start(1); - test2 = dram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); if (test1 > test2) { sdram_start(0); dramsize = test1; @@ -163,9 +125,9 @@ long int initdram (int board_type) #ifdef CONFIG_MPC5200_DDR *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ sdram_start(0); - test1 = dram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); + test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); sdram_start(1); - test2 = dram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); + test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000); if (test1 > test2) { sdram_start(0); dramsize2 = test1; diff --git a/board/icu862/icu862.c b/board/icu862/icu862.c index cea28b2de0..b41ebae28b 100644 --- a/board/icu862/icu862.c +++ b/board/icu862/icu862.c @@ -208,39 +208,8 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c index 10171ddc10..eb6eaea278 100644 --- a/board/incaip/incaip.c +++ b/board/incaip/incaip.c @@ -47,52 +47,6 @@ static ulong max_sdram_size(void) return size; } -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - -static long int dram_size(long int *base, long int maxsize) -{ - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} - long int initdram(int board_type) { int rows, cols, best_val = *INCA_IP_SDRAM_MC_CFGPB0; @@ -114,7 +68,7 @@ long int initdram(int board_type) { *INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) | (rows << 4) | cols; - size = dram_size((ulong *)CFG_SDRAM_BASE, + size = get_ram_size((ulong *)CFG_SDRAM_BASE, max_sdram_size()); if (size > max_size) diff --git a/board/ip860/ip860.c b/board/ip860/ip860.c index a20c211055..d66621cdf1 100644 --- a/board/ip860/ip860.c +++ b/board/ip860/ip860.c @@ -253,42 +253,10 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/iphase4539/iphase4539.c b/board/iphase4539/iphase4539.c index 45f3dad36a..e50250e456 100644 --- a/board/iphase4539/iphase4539.c +++ b/board/iphase4539/iphase4539.c @@ -198,9 +198,8 @@ long int initdram (int board_type) volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8260_t *memctl = &immap->im_memctl; volatile uchar *base; - volatile ulong *addr, cnt, val; - ulong save[32]; /* to make test non-destructive */ - int i, maxsize; + ulong maxsize; + int i; memctl->memc_psrt = CFG_PSRT; memctl->memc_mptpr = CFG_MPTPR; @@ -237,43 +236,10 @@ long int initdram (int board_type) */ maxsize = (1 + (~memctl->memc_or1 | 0x7fff)) / 2; - /* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - i = 0; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - save[i++] = *addr; - *addr = ~cnt; - } + maxsize = get_ram_size((long *)base, maxsize); - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; - - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - /* Write the actual size to ORx - */ - memctl->memc_or1 |= ~(cnt * sizeof (long) - 1); - maxsize = cnt * sizeof (long) / 2; - break; - } - } + memctl->memc_or1 |= ~(maxsize - 1); - maxsize *= 2; if (maxsize != hwc_main_sdram_size ()) printf ("Oops: memory test has not found all memory!\n"); #endif diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c index 131ab0201d..cb661c9d28 100644 --- a/board/ivm/ivm.c +++ b/board/ivm/ivm.c @@ -41,14 +41,13 @@ static long int dram_size (long int, long int *, long int); /* * 50 MHz SHARC access using UPM A */ -const uint sharc_table[] = -{ +const uint sharc_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ 0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFEC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Read. (Offset 8 in UPM RAM) */ @@ -61,8 +60,8 @@ const uint sharc_table[] = * Single Write. (Offset 18 in UPM RAM) */ 0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFEC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ @@ -81,16 +80,15 @@ const uint sharc_table[] = /* * Exception. (Offset 3c in UPM RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* * 50 MHz SDRAM access using UPM B */ -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ @@ -104,40 +102,40 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ + 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ /* * Burst Read. (Offset 8 in UPM RAM) */ 0x0E26FC04, 0x10ADFC04, 0xF0AFFC00, 0xF0AFFC00, - 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */ - _NOT_USED_, + 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C45, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPM RAM) */ - 0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */ + 0x1F27FC04, 0xEEAEBC04, 0x01B93C00, 0x1FF77C45, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ 0x0E26BC00, 0x10AD7C00, 0xF0AFFC00, 0xF0AFFC00, - 0xE1BBBC04, 0x1FF77C45, /* last */ - _NOT_USED_, _NOT_USED_, + 0xE1BBBC04, 0x1FF77C45, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPM RAM) */ 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC84, - 0xFFFFFC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFFC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPM RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -161,101 +159,104 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ -long int -initdram (int board_type) +long int initdram (int board_type) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - long int size_b0; - - /* enable SDRAM clock ("switch on" SDRAM) */ - immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */ - immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE ; /* output */ - immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE ; /* assert SDRAM CLKE */ - udelay(1); - - /* - * Map controller bank 1 for ELIC SACCO - */ - memctl->memc_or1 = CFG_OR1; - memctl->memc_br1 = CFG_BR1; - - /* - * Map controller bank 2 for ELIC EPIC - */ - memctl->memc_or2 = CFG_OR2; - memctl->memc_br2 = CFG_BR2; - - /* - * Configure UPMA for SHARC - */ - upmconfig(UPMA, (uint *)sharc_table, sizeof(sharc_table)/sizeof(uint)); + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; + long int size_b0; + + /* enable SDRAM clock ("switch on" SDRAM) */ + immr->im_cpm.cp_pbpar &= ~(CFG_PB_SDRAM_CLKE); /* GPIO */ + immr->im_cpm.cp_pbodr &= ~(CFG_PB_SDRAM_CLKE); /* active output */ + immr->im_cpm.cp_pbdir |= CFG_PB_SDRAM_CLKE; /* output */ + immr->im_cpm.cp_pbdat |= CFG_PB_SDRAM_CLKE; /* assert SDRAM CLKE */ + udelay (1); + + /* + * Map controller bank 1 for ELIC SACCO + */ + memctl->memc_or1 = CFG_OR1; + memctl->memc_br1 = CFG_BR1; + + /* + * Map controller bank 2 for ELIC EPIC + */ + memctl->memc_or2 = CFG_OR2; + memctl->memc_br2 = CFG_BR2; + + /* + * Configure UPMA for SHARC + */ + upmconfig (UPMA, (uint *) sharc_table, + sizeof (sharc_table) / sizeof (uint)); #if defined(CONFIG_IVML24) - /* - * Map controller bank 4 for HDLC Address space - */ - memctl->memc_or4 = CFG_OR4; - memctl->memc_br4 = CFG_BR4; + /* + * Map controller bank 4 for HDLC Address space + */ + memctl->memc_or4 = CFG_OR4; + memctl->memc_br4 = CFG_BR4; #endif - /* - * Map controller bank 5 for SHARC - */ - memctl->memc_or5 = CFG_OR5; - memctl->memc_br5 = CFG_BR5; - - memctl->memc_mamr = 0x00001000; - - /* - * Configure UPMB for SDRAM - */ - upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - memctl->memc_mptpr = CFG_MPTPR_1BK_8K; - - memctl->memc_mar = 0x00000088; - - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CFG_OR3_PRELIM; - memctl->memc_br3 = CFG_BR3_PRELIM; - - memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ - - udelay(200); - memctl->memc_mcr = 0x80806105; /* precharge */ - udelay(1); - memctl->memc_mcr = 0x80806106; /* load mode register */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80806130; /* autorefresh */ - - memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ - - /* - * Check Bank 0 Memory Size for re-configuration - */ - size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); - - memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; - - return (size_b0); + /* + * Map controller bank 5 for SHARC + */ + memctl->memc_or5 = CFG_OR5; + memctl->memc_br5 = CFG_BR5; + + memctl->memc_mamr = 0x00001000; + + /* + * Configure UPMB for SDRAM + */ + upmconfig (UPMB, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + memctl->memc_mptpr = CFG_MPTPR_1BK_8K; + + memctl->memc_mar = 0x00000088; + + /* + * Map controller bank 3 to the SDRAM bank at preliminary address. + */ + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; + + memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ + + udelay (200); + memctl->memc_mcr = 0x80806105; /* precharge */ + udelay (1); + memctl->memc_mcr = 0x80806106; /* load mode register */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80806130; /* autorefresh */ + + memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ + + /* + * Check Bank 0 Memory Size for re-configuration + */ + size_b0 = + dram_size (CFG_MBMR_8COL, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); + + memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; + + return (size_b0); } /* ------------------------------------------------------------------------- */ @@ -268,60 +269,29 @@ initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mbmr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + memctl->memc_mbmr = mamr_value; - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } /* ------------------------------------------------------------------------- */ -void reset_phy(void) +void reset_phy (void) { - immap_t *immr = (immap_t *)CFG_IMMR; + immap_t *immr = (immap_t *) CFG_IMMR; /* De-assert Ethernet Powerdown */ - immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */ - immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */ - immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN ; /* output */ - immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ - udelay(1000); + immr->im_cpm.cp_pbpar &= ~(CFG_PB_ETH_POWERDOWN); /* GPIO */ + immr->im_cpm.cp_pbodr &= ~(CFG_PB_ETH_POWERDOWN); /* active output */ + immr->im_cpm.cp_pbdir |= CFG_PB_ETH_POWERDOWN; /* output */ + immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ + udelay (1000); /* * RESET is implemented by a positive pulse of at least 1 us @@ -330,15 +300,15 @@ void reset_phy(void) * Configure RESET pins for NS DP83843 PHY, and RESET chip. * * Note: The RESET pin is high active, but there is an - * inverter on the SPD823TS board... + * inverter on the SPD823TS board... */ immr->im_ioport.iop_pcpar &= ~(CFG_PC_ETH_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET; + immr->im_ioport.iop_pcdir |= CFG_PC_ETH_RESET; /* assert RESET signal of PHY */ immr->im_ioport.iop_pcdat &= ~(CFG_PC_ETH_RESET); udelay (10); /* de-assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET; + immr->im_ioport.iop_pcdat |= CFG_PC_ETH_RESET; udelay (10); } @@ -350,19 +320,19 @@ void show_boot_progress (int status) # if defined(STATUS_LED_YELLOW) status_led_set (STATUS_LED_YELLOW, (status < 0) ? STATUS_LED_ON : STATUS_LED_OFF); -# endif /* STATUS_LED_YELLOW */ +# endif /* STATUS_LED_YELLOW */ # if defined(STATUS_LED_BOOT) if (status == 6) - status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF); -# endif /* STATUS_LED_BOOT */ + status_led_set (STATUS_LED_BOOT, STATUS_LED_OFF); +# endif /* STATUS_LED_BOOT */ #endif /* CONFIG_STATUS_LED */ } /* ------------------------------------------------------------------------- */ -void ide_set_reset(int on) +void ide_set_reset (int on) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; /* * Configure PC for IDE Reset Pin @@ -370,13 +340,13 @@ void ide_set_reset(int on) if (on) { /* assert RESET */ immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET); } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; } /* program port pin as GPIO output */ immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); + immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; } /* ------------------------------------------------------------------------- */ diff --git a/board/kup4k/kup4k.c b/board/kup4k/kup4k.c index 3c082142a0..abf5294403 100644 --- a/board/kup4k/kup4k.c +++ b/board/kup4k/kup4k.c @@ -230,42 +230,10 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return(get_ram_size(base, maxsize)); } #endif diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c index 655c95182b..aa96a16c51 100644 --- a/board/lantec/lantec.c +++ b/board/lantec/lantec.c @@ -39,13 +39,12 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) */ 0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00, - 0x1ff77c47, /* last */ + 0x1ff77c47, /* last */ /* * SDRAM Initialization (offset 5 in UPMA RAM) * @@ -54,39 +53,39 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */ + 0x1ff77c35, 0xefeabc34, 0x1fb57c35, /* last */ /* * Burst Read. (Offset 8 in UPMA RAM) */ 0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00, - 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ + 0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ - 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ + 0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00, - 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ - _NOT_USED_, + 0xf0affc00, 0xe1bbbc04, 0x1ff77c47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ 0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */ - _NOT_USED_, + 0xfffffc84, 0xfffffc07, 0xfffffc07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7ffffc07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -104,7 +103,7 @@ const uint sdram_table[] = int checkboard (void) { - printf("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC); + printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC); return 0; } @@ -112,7 +111,7 @@ int checkboard (void) long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; + volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size_b0; int i; @@ -120,16 +119,17 @@ long int initdram (int board_type) /* * Configure UPMA for SDRAM */ - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mptpr = CFG_MPTPR_1BK_8K /* XXX CFG_MPTPR XXX */; + memctl->memc_mptpr = CFG_MPTPR_1BK_8K /* XXX CFG_MPTPR XXX */ ; /* burst length=4, burst type=sequential, CAS latency=2 */ memctl->memc_mar = 0x00000088; /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ + * Map controller bank 3 to the SDRAM bank at preliminary address. + */ memctl->memc_or3 = CFG_OR3_PRELIM; memctl->memc_br3 = CFG_BR3_PRELIM; @@ -137,26 +137,30 @@ long int initdram (int board_type) memctl->memc_mamr = CFG_MAMR_8COL; /* refresh not enabled yet */ /* mode initialization (offset 5) */ - udelay(200); /* 0x80006105 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x05); + udelay (200); /* 0x80006105 */ + memctl->memc_mcr = + MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05); /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ - udelay(1); /* 0x80006130 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x30); - udelay(1); /* 0x80006130 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x30); + udelay (1); /* 0x80006130 */ + memctl->memc_mcr = + MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); + udelay (1); /* 0x80006130 */ + memctl->memc_mcr = + MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30); - udelay(1); /* 0x80006106 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF(1) | MCR_MAD(0x06); + udelay (1); /* 0x80006106 */ + memctl->memc_mcr = + MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06); memctl->memc_mamr |= MAMR_PTAE; /* refresh enabled */ - udelay(200); + udelay (200); /* Need at least 10 DRAM accesses to stabilize */ - for (i=0; i<10; ++i) { - volatile unsigned long *addr = \ - (volatile unsigned long *)SDRAM_BASE3_PRELIM; + for (i = 0; i < 10; ++i) { + volatile unsigned long *addr = + (volatile unsigned long *) SDRAM_BASE3_PRELIM; unsigned long val; val = *(addr + i); @@ -164,11 +168,10 @@ long int initdram (int board_type) } /* - * Check Bank 0 Memory Size for re-configuration - */ + * Check Bank 0 Memory Size for re-configuration + */ size_b0 = dram_size (CFG_MAMR_8COL, - (ulong *)SDRAM_BASE3_PRELIM, - SDRAM_MAX_SIZE); + (ulong *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); memctl->memc_mamr = CFG_MAMR_8COL | MAMR_PTAE; @@ -178,7 +181,7 @@ long int initdram (int board_type) memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - udelay(1000); + udelay (1000); return (size_b0); } @@ -193,44 +196,13 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - val = *addr; - *addr = save[--i]; + memctl->memc_mamr = mamr_value; - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index 0e6c3fc2ca..3ec9fa5511 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -326,42 +326,10 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize { volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/musenki/musenki.c b/board/musenki/musenki.c index d805f09e3f..88ef83ac12 100644 --- a/board/musenki/musenki.c +++ b/board/musenki/musenki.c @@ -47,50 +47,24 @@ int checkflash (void) long int initdram (int board_type) { - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + long size; + long new_bank0_end; + long mear1; + long emear1; + + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + return (size); } /* diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c index 0cec63f59a..20a551dfa5 100644 --- a/board/mvblue/mvblue.c +++ b/board/mvblue/mvblue.c @@ -77,53 +77,24 @@ int checkboard (void) long int initdram (int board_type) { - int i, cnt; - volatile uchar *base = CFG_SDRAM_BASE; - volatile ulong *addr; - ulong save[32]; - ulong val, ret = 0; - - for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0; - cnt >>= 1) { - addr = (volatile ulong *) base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof (long) - 1; - ulong mear1 = mpc824x_mpc107_getreg (MEAR1); - ulong emear1 = mpc824x_mpc107_getreg (EMEAR1); - - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> - MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> - MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg (MEAR1, mear1); - mpc824x_mpc107_setreg (EMEAR1, emear1); - ret = cnt * sizeof (long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; - Done: - return ret; + long size; + long new_bank0_end; + long mear1; + long emear1; + + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + return (size); } /* ------------------------------------------------------------------------- */ diff --git a/board/mvs1/mvs1.c b/board/mvs1/mvs1.c index cd5a01c555..fb7547f349 100644 --- a/board/mvs1/mvs1.c +++ b/board/mvs1/mvs1.c @@ -337,37 +337,10 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - long int cnt, val; - memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - return (0); - } - - for (cnt = 1;; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - /* NOTREACHED */ + return (get_ram_size(base, maxsize)); } diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c index 07d173b39e..cbcbab8945 100644 --- a/board/nx823/nx823.c +++ b/board/nx823/nx823.c @@ -36,16 +36,12 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF -const uint sdram_table[] = -{ +const uint sdram_table[] = { #if (MPC8XX_SPEED <= 50000000L) /* * Single Read. (Offset 0 in UPMA RAM) */ - 0x0F07EC04, - 0x01BBD804, - 0x1FF7F440, - 0xFFFFFC07, + 0x0F07EC04, 0x01BBD804, 0x1FF7F440, 0xFFFFFC07, 0xFFFFFFFF, /* @@ -56,95 +52,47 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1FE7F434, - 0xEFABE834, - 0x1FA7D435, + 0x1FE7F434, 0xEFABE834, 0x1FA7D435, /* * Burst Read. (Offset 8 in UPMA RAM) */ - 0x0F07EC04, - 0x10EFDC04, - 0xF0AFFC00, - 0xF0AFFC00, - 0xF1AFFC00, - 0xFFAFFC40, - 0xFFAFFC07, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, + 0x0F07EC04, 0x10EFDC04, 0xF0AFFC00, 0xF0AFFC00, + 0xF1AFFC00, 0xFFAFFC40, 0xFFAFFC07, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Single Write. (Offset 18 in UPMA RAM) */ - 0x0E07E804, - 0x01BBD000, - 0x1FF7F447, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, + 0x0E07E804, 0x01BBD000, 0x1FF7F447, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Burst Write. (Offset 20 in UPMA RAM) */ - 0x0E07E800, - 0x10EFD400, - 0xF0AFFC00, - 0xF0AFFC00, - 0xF1AFFC47, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, + 0x0E07E800, 0x10EFD400, 0xF0AFFC00, 0xF0AFFC00, + 0xF1AFFC47, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Refresh (Offset 30 in UPMA RAM) */ - 0x1FF7DC84, - 0xFFFFFC04, - 0xFFFFFC84, - 0xFFFFFC07, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF, + 0x1FF7DC84, 0xFFFFFC04, 0xFFFFFC84, 0xFFFFFC07, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* * Exception. (Offset 3c in UPMA RAM) */ - 0x7FFFFC07, - 0xFFFFFFFF, - 0xFFFFFFFF, - 0xFFFFFFFF - + 0x7FFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF #else /* * Single Read. (Offset 0 in UPMA RAM) */ - 0x1F07FC04, - 0xEEAFEC04, - 0x11AFDC04, - 0xEFBBF800, + 0x1F07FC04, 0xEEAFEC04, 0x11AFDC04, 0xEFBBF800, 0x1FF7F447, /* @@ -155,55 +103,35 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1FF7F434, - 0xEFEBE834, - 0x1FB7D435, + 0x1FF7F434, 0xEFEBE834, 0x1FB7D435, /* * Burst Read. (Offset 8 in UPMA RAM) */ - 0x1F07FC04, - 0xEEAFEC04, - 0x10AFDC04, - 0xF0AFFC00, - 0xF0AFFC00, - 0xF1AFFC00, - 0xEFBBF800, - 0x1FF7F447, + 0x1F07FC04, 0xEEAFEC04, 0x10AFDC04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBBF800, 0x1FF7F447, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ - 0x1F07FC04, - 0xEEAFE800, - 0x01BBD004, - 0x1FF7F447, + 0x1F07FC04, 0xEEAFE800, 0x01BBD004, 0x1FF7F447, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ - 0x1F07FC04, - 0xEEAFE800, - 0x10AFD400, - 0xF0AFFC00, - 0xF0AFFC00, - 0xE1BBF804, - 0x1FF7F447, - _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x1F07FC04, 0xEEAFE800, 0x10AFD400, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BBF804, 0x1FF7F447, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ - 0x1FF7DC84, - 0xFFFFFC04, - 0xFFFFFC04, - 0xFFFFFC04, - 0xFFFFFC84, - 0xFFFFFC07, + 0x1FF7DC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, @@ -211,7 +139,7 @@ const uint sdram_table[] = * Exception. (Offset 3c in UPMA RAM) */ 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, #endif }; @@ -225,91 +153,94 @@ const uint sdram_table[] = int checkboard (void) { - printf ("Board: Nexus NX823"); - return (0); + printf ("Board: Nexus NX823"); + return (0); } /* ------------------------------------------------------------------------- */ long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0, size_b1, size8, size9; - - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - /* - * Up to 2 Banks of 64Mbit x 2 devices - * Initial builds only have 1 - */ - memctl->memc_mptpr = CFG_MPTPR_1BK_4K; - memctl->memc_mar = 0x00000088; - - /* - * Map controller SDRAM bank 0 - */ - memctl->memc_or1 = CFG_OR1_PRELIM; - memctl->memc_br1 = CFG_BR1_PRELIM; - memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - udelay(200); - - /* - * Map controller SDRAM bank 1 - */ - memctl->memc_or2 = CFG_OR2_PRELIM; - memctl->memc_br2 = CFG_BR2_PRELIM; - - /* - * Perform SDRAM initializsation sequence - */ - memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ - udelay(1); - memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */ - udelay(1); - - memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */ - udelay(1); - memctl->memc_mcr = 0x80004230; /* SDRAM bank 1 - execute twice */ - udelay(1); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - udelay (1000); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CFG_MPTPR_2BK_8K; - - memctl->memc_mar = 0x00000088; - - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); - - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE1_PRELIM, SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size_b0 = size9; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0, size_b1, size8, size9; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * Up to 2 Banks of 64Mbit x 2 devices + * Initial builds only have 1 + */ + memctl->memc_mptpr = CFG_MPTPR_1BK_4K; + memctl->memc_mar = 0x00000088; + + /* + * Map controller SDRAM bank 0 + */ + memctl->memc_or1 = CFG_OR1_PRELIM; + memctl->memc_br1 = CFG_BR1_PRELIM; + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + udelay (200); + + /* + * Map controller SDRAM bank 1 + */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; + + /* + * Perform SDRAM initializsation sequence + */ + memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - execute twice */ + udelay (1); + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */ + udelay (1); + memctl->memc_mcr = 0x80004230; /* SDRAM bank 1 - execute twice */ + udelay (1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + udelay (1000); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + + memctl->memc_mar = 0x00000088; + + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE1_PRELIM, + SDRAM_MAX_SIZE); + + udelay (1000); + + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE1_PRELIM, + SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size_b0 = size9; /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size_b0 = size8; - memctl->memc_mamr = CFG_MAMR_8COL; - udelay(500); + } else { /* back to 8 columns */ + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } + } /* * Check Bank 1 Memory Size @@ -317,83 +248,97 @@ long int initdram (int board_type) * [9 column SDRAM may also be used in 8 column mode, * but then only half the real size will be used.] */ - size_b1 = dram_size (memctl->memc_mamr, (ulong *)SDRAM_BASE2_PRELIM, - SDRAM_MAX_SIZE); + size_b1 = dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE2_PRELIM, + SDRAM_MAX_SIZE); /* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */ - udelay (1000); - - /* - * Adjust refresh rate depending on SDRAM type, both banks - * For types > 128 MBit leave it at the current (fast) rate - */ - if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; - udelay(1000); - } - - /* - * Final mapping: map bigger bank first - */ - if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ - - memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - if (size_b0 > 0) { - /* - * Position Bank 0 immediately above Bank 1 - */ - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) - + size_b1; - } else { - unsigned long reg; - /* - * No bank 0 - * - * invalidate bank - */ - memctl->memc_br1 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; + udelay (1000); + + /* + * Adjust refresh rate depending on SDRAM type, both banks + * For types > 128 MBit leave it at the current (fast) rate + */ + if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); } - } else { /* SDRAM Bank 0 is bigger - map first */ - - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - - if (size_b1 > 0) { - /* - * Position Bank 1 immediately above Bank 0 - */ - memctl->memc_or2 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V) - + size_b0; - } else { - unsigned long reg; - /* - * No bank 1 - * - * invalidate bank - */ - memctl->memc_br2 = 0; - - /* adjust refresh rate depending on SDRAM type, one bank */ - reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ - memctl->memc_mptpr = reg; + /* + * Final mapping: map bigger bank first + */ + if (size_b1 > size_b0) { /* SDRAM Bank 1 is bigger - map first */ + + memctl->memc_or2 = + ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b0 > 0) { + /* + * Position Bank 0 immediately above Bank 1 + */ + memctl->memc_or1 = + ((-size_b0) & 0xFFFF0000) | + CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | + BR_V) + + size_b1; + } else { + unsigned long reg; + + /* + * No bank 0 + * + * invalidate bank + */ + memctl->memc_br1 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } + + } else { /* SDRAM Bank 0 is bigger - map first */ + + memctl->memc_or1 = + ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br1 = + (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + + if (size_b1 > 0) { + /* + * Position Bank 1 immediately above Bank 0 + */ + memctl->memc_or2 = + ((-size_b1) & 0xFFFF0000) | + CFG_OR_TIMING_SDRAM; + memctl->memc_br2 = + ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | + BR_V) + + size_b0; + } else { + unsigned long reg; + + /* + * No bank 1 + * + * invalidate bank + */ + memctl->memc_br2 = 0; + + /* adjust refresh rate depending on SDRAM type, one bank */ + reg = memctl->memc_mptpr; + reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + memctl->memc_mptpr = reg; + } } - } - udelay(10000); + udelay (10000); - return (size_b0 + size_b1); + return (size_b0 + size_b1); } /* ------------------------------------------------------------------------- */ @@ -406,40 +351,15 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - long int cnt, val; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - *addr = ~cnt; - } + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - /* write 0 to base address */ - addr = base; - *addr = 0; + memctl->memc_mamr = mamr_value; - /* check at base address */ - if ((val = *addr) != 0) { - return (0); - } - - for (cnt = 1; ; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - /* NOTREACHED */ + return (get_ram_size (base, maxsize)); } u_long *my_sernum; @@ -452,16 +372,16 @@ int misc_init_r (void) u_char *e = gd->bd->bi_enetaddr; /* save serial numbre from flash (uniquely programmed) */ - my_sernum = malloc(8); - memcpy(my_sernum,gd->bd->bi_sernum,8); + my_sernum = malloc (8); + memcpy (my_sernum, gd->bd->bi_sernum, 8); /* save env variables according to sernum */ - sprintf(tmp,"%08lx%08lx",my_sernum[0],my_sernum[1]); - setenv("serial#",tmp); + sprintf (tmp, "%08lx%08lx", my_sernum[0], my_sernum[1]); + setenv ("serial#", tmp); - sprintf(tmp,"%02x:%02x:%02x:%02x:%02x:%02x" - ,e[0],e[1],e[2],e[3],e[4],e[5]); - setenv("ethaddr",tmp); + sprintf (tmp, "%02x:%02x:%02x:%02x:%02x:%02x", e[0], e[1], e[2], e[3], + e[4], e[5]); + setenv ("ethaddr", tmp); return (0); } @@ -470,7 +390,7 @@ void load_sernum_ethaddr (void) DECLARE_GLOBAL_DATA_PTR; int i; - bd_t * bd = gd->bd; + bd_t *bd = gd->bd; for (i = 0; i < 8; i++) { bd->bi_sernum[i] = *(u_char *) (CFG_FLASH_SN_BASE + i); diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c index 0d6fc8536c..8ac0e79a02 100644 --- a/board/oxc/oxc.c +++ b/board/oxc/oxc.c @@ -35,50 +35,24 @@ int checkboard (void) long int initdram (int board_type) { #ifndef CFG_RAMBOOT - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + long size; + long new_bank0_end; + long mear1; + long emear1; + + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + return (size); #else /* if U-Boot starts from RAM, then suppose we have 16Mb of RAM */ return (16 << 20); diff --git a/board/pm826/pm826.c b/board/pm826/pm826.c index 86a928bcf4..7514cd77bb 100644 --- a/board/pm826/pm826.c +++ b/board/pm826/pm826.c @@ -221,13 +221,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; - volatile ulong cnt, val; - volatile ulong *addr; volatile uint *sdmr_ptr; volatile uint *orx_ptr; + ulong maxsize, size; int i; - ulong save[32]; /* to make test non-destructive */ - ulong maxsize; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be @@ -274,41 +271,11 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; - /* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - i = 0; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size((long *)base, maxsize); - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; + *orx_ptr = orx | ~(size - 1); - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - /* Write the actual size to ORx - */ - *orx_ptr = orx | ~(cnt * sizeof (long) - 1); - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (size); } diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c index 9b1fc00e30..c0111dcd92 100644 --- a/board/pn62/pn62.c +++ b/board/pn62/pn62.c @@ -76,55 +76,26 @@ int checkboard (void) long int initdram (int board_type) { - int i, cnt; - volatile uchar *base = CFG_SDRAM_BASE; - volatile ulong *addr; - ulong save[32]; - ulong val, ret = 0; + long size; + long new_bank0_end; + long mear1; + long emear1; show_startup_phase (2); - for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0; - cnt >>= 1) { - addr = (volatile ulong *) base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof (long) - 1; - ulong mear1 = mpc824x_mpc107_getreg (MEAR1); - ulong emear1 = mpc824x_mpc107_getreg (EMEAR1); - - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg (MEAR1, mear1); - mpc824x_mpc107_setreg (EMEAR1, emear1); - - ret = cnt * sizeof (long); - goto Done; - } - } + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg (MEAR1); + emear1 = mpc824x_mpc107_getreg (EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg (MEAR1, mear1); + mpc824x_mpc107_setreg (EMEAR1, emear1); - ret = CFG_MAX_RAM_SIZE; - Done: - show_startup_phase (3); - return ret; + return (size); } /* diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index b75e95a604..8ca08e25d1 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -258,41 +258,10 @@ static long int dram_size (long int mamr_value, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c index 9bb1c1d535..d0ceb4a7d5 100644 --- a/board/rbc823/rbc823.c +++ b/board/rbc823/rbc823.c @@ -127,109 +127,112 @@ const uint static_table[] = int checkboard (void) { - unsigned char *s = getenv("serial#"); + unsigned char *s = getenv ("serial#"); - if (!s || strncmp(s, "TQM8", 4)) { - printf ("### No HW ID - assuming RBC823\n"); - return (0); - } + if (!s || strncmp (s, "TQM8", 4)) { + printf ("### No HW ID - assuming RBC823\n"); + return (0); + } - puts(s); - putc ('\n'); + puts (s); + putc ('\n'); - return (0); + return (0); } /* ------------------------------------------------------------------------- */ long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0, size8, size9; - - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); - - /* - * 1 Bank of 64Mbit x 2 devices - */ - memctl->memc_mptpr = CFG_MPTPR_1BK_4K; - memctl->memc_mar = 0x00000088; - - /* - * Map controller SDRAM bank 0 - */ - memctl->memc_or4 = CFG_OR4_PRELIM; - memctl->memc_br4 = CFG_BR4_PRELIM; - memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ - udelay(200); - - /* - * Perform SDRAM initializsation sequence - */ - memctl->memc_mcr = 0x80008105; /* SDRAM bank 0 */ - udelay(1); - memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X; - udelay(200); - memctl->memc_mcr = 0x80008130; /* SDRAM bank 0 - execute twice */ - udelay(1); - memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X; - udelay(200); - - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - udelay (1000); - - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; /* 16: but should be: CFG_MPTPR_1BK_4K */ - - /* - * Check Bank 0 Memory Size for re-configuration - * - * try 8 column mode - */ - size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE4_PRELIM, SDRAM_MAX_SIZE); - udelay (1000); - - /* - * try 9 column mode - */ - size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE4_PRELIM, SDRAM_MAX_SIZE); - - if (size8 < size9) { /* leave configuration at 9 columns */ - size_b0 = size9; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0, size8, size9; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * 1 Bank of 64Mbit x 2 devices + */ + memctl->memc_mptpr = CFG_MPTPR_1BK_4K; + memctl->memc_mar = 0x00000088; + + /* + * Map controller SDRAM bank 0 + */ + memctl->memc_or4 = CFG_OR4_PRELIM; + memctl->memc_br4 = CFG_BR4_PRELIM; + memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + udelay (200); + + /* + * Perform SDRAM initializsation sequence + */ + memctl->memc_mcr = 0x80008105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X; + udelay (200); + memctl->memc_mcr = 0x80008130; /* SDRAM bank 0 - execute twice */ + udelay (1); + memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X; + udelay (200); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + udelay (1000); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; /* 16: but should be: CFG_MPTPR_1BK_4K */ + + /* + * Check Bank 0 Memory Size for re-configuration + * + * try 8 column mode + */ + size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE4_PRELIM, + SDRAM_MAX_SIZE); + udelay (1000); + + /* + * try 9 column mode + */ + size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE4_PRELIM, + SDRAM_MAX_SIZE); + + if (size8 < size9) { /* leave configuration at 9 columns */ + size_b0 = size9; /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ - } else { /* back to 8 columns */ - size_b0 = size8; - memctl->memc_mamr = CFG_MAMR_8COL; - udelay(500); + } else { /* back to 8 columns */ + size_b0 = size8; + memctl->memc_mamr = CFG_MAMR_8COL; + udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ - } + } - udelay (1000); + udelay (1000); - /* - * Adjust refresh rate depending on SDRAM type, both banks - * For types > 128 MBit leave it at the current (fast) rate - */ - if ((size_b0 < 0x02000000) ) { - /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; - udelay(1000); - } + /* + * Adjust refresh rate depending on SDRAM type, both banks + * For types > 128 MBit leave it at the current (fast) rate + */ + if ((size_b0 < 0x02000000)) { + /* reduce to 15.6 us (62.4 us / quad) */ + memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + udelay (1000); + } - /* SDRAM Bank 0 is bigger - map first */ + /* SDRAM Bank 0 is bigger - map first */ - memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br4 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; + memctl->memc_br4 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; - udelay(10000); + udelay (10000); - return (size_b0); + return (size_b0); } /* ------------------------------------------------------------------------- */ @@ -242,50 +245,25 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - long int cnt, val; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long)/2; cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - *addr = ~cnt; - } + memctl->memc_mamr = mamr_value; - /* write 0 to base address */ - addr = base; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - return (0); - } - - for (cnt = 1; cnt < maxsize/sizeof(long) ; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return cnt * sizeof(long); - /* NOTREACHED */ + return (get_ram_size (base, maxsize)); } -void doc_init(void) +void doc_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - upmconfig(UPMB, (uint *)static_table, sizeof(static_table)/sizeof(uint)); - memctl->memc_mbmr = MAMR_DSA_1_CYCL; + upmconfig (UPMB, (uint *) static_table, + sizeof (static_table) / sizeof (uint)); + memctl->memc_mbmr = MAMR_DSA_1_CYCL; - doc_probe(FLASH_BASE1_PRELIM); + doc_probe (FLASH_BASE1_PRELIM); } diff --git a/board/rmu/rmu.c b/board/rmu/rmu.c index 5fda4c061b..e11b5b89b0 100644 --- a/board/rmu/rmu.c +++ b/board/rmu/rmu.c @@ -155,53 +155,8 @@ static long int dram_size (long int mamr_value, long int *base, { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val, size; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (size); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } diff --git a/board/sandpoint/sandpoint.c b/board/sandpoint/sandpoint.c index fe1c0a0d5e..d3445bd92d 100644 --- a/board/sandpoint/sandpoint.c +++ b/board/sandpoint/sandpoint.c @@ -52,50 +52,24 @@ int checkflash (void) long int initdram (int board_type) { - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; + long size; + long new_bank0_end; + long mear1; + long emear1; - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + return (size); } /* diff --git a/board/siemens/CCM/ccm.c b/board/siemens/CCM/ccm.c index f2283b7601..b54f3c134f 100644 --- a/board/siemens/CCM/ccm.c +++ b/board/siemens/CCM/ccm.c @@ -333,42 +333,10 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize { volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c index 30adbfcf48..1243887a3e 100644 --- a/board/siemens/IAD210/IAD210.c +++ b/board/siemens/IAD210/IAD210.c @@ -41,12 +41,11 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPMA RAM) */ - 0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */ + 0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47, /* last */ _NOT_USED_, /* * SDRAM Initialization (offset 5 in UPMA RAM) @@ -56,46 +55,46 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0xFFFAF834, 0xFFE5B435, /* last */ - _NOT_USED_, + 0xFFFAF834, 0xFFE5B435, /* last */ + _NOT_USED_, /* * Burst Read. (Offset 8 in UPMA RAM) */ 0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00, - 0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */ - _NOT_USED_, + 0xF0AFFC00, 0xF0AAF800, 0xF1A5E447, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPMA RAM) */ - 0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */ - _NOT_USED_, + 0xFE29B300, 0xF1A27304, 0xFFA5F747, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPMA RAM) */ 0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00, - 0xF1AAF804, 0xFFA5F447, /* last */ - _NOT_USED_, _NOT_USED_, + 0xF1AAF804, 0xFFA5F447, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPMA RAM) */ 0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84, - 0xFFAFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFAFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * MRS sequence (Offset 38 in UPMA RAM) */ - 0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */ - _NOT_USED_, + 0xFFAAB834, 0xFFA57434, 0xFFAFFC05, /* last */ + _NOT_USED_, /* * Exception. (Offset 3c in UPMA RAM) */ - 0xFFAFFC04, 0xFFAFFC05, /* last */ - _NOT_USED_, _NOT_USED_, + 0xFFAFFC04, 0xFFAFFC05, /* last */ + _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -103,82 +102,84 @@ const uint sdram_table[] = long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile fec_t *fecp = &immap->im_cpm.cp_fec; - long int size; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile iop8xx_t *iop = &immap->im_ioport; + volatile fec_t *fecp = &immap->im_cpm.cp_fec; + long int size; - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); - /* - * Preliminary prescaler for refresh (depends on number of - * banks): This value is selected for four cycles every 62.4 us - * with two SDRAM banks or four cycles every 31.2 us with one - * bank. It will be adjusted after memory sizing. - */ - memctl->memc_mptpr = CFG_MPTPR; + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR; - memctl->memc_mar = 0x00000088; + memctl->memc_mar = 0x00000088; - /* - * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at - * preliminary addresses - these have to be modified after the - * SDRAM size has been determined. - */ - memctl->memc_or2 = CFG_OR2_PRELIM; - memctl->memc_br2 = CFG_BR2_PRELIM; + /* + * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; - memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ - udelay(200); + udelay (200); - /* perform SDRAM initializsation sequence */ + /* perform SDRAM initializsation sequence */ - memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ - udelay(1); - memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ - udelay(1); + memctl->memc_mcr = 0x80004105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80004230; /* SDRAM bank 0 - execute twice */ + udelay (1); - memctl->memc_mcr = 0x80004105; /* SDRAM precharge */ - udelay(1); - memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */ - udelay(1); - memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */ - udelay(1); + memctl->memc_mcr = 0x80004105; /* SDRAM precharge */ + udelay (1); + memctl->memc_mcr = 0x80004030; /* SDRAM 16x autorefresh */ + udelay (1); + memctl->memc_mcr = 0x80004138; /* SDRAM upload parameters */ + udelay (1); - memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ - udelay (1000); + udelay (1000); - /* - * Check Bank 0 Memory Size for re-configuration - * - */ - size = dram_size (CFG_MAMR, (ulong *)SDRAM_BASE_PRELIM, SDRAM_MAX_SIZE); + /* + * Check Bank 0 Memory Size for re-configuration + * + */ + size = dram_size (CFG_MAMR, (ulong *) SDRAM_BASE_PRELIM, + SDRAM_MAX_SIZE); - udelay (1000); + udelay (1000); - memctl->memc_mamr = CFG_MAMR; - udelay (1000); + memctl->memc_mamr = CFG_MAMR; + udelay (1000); - /* - * Final mapping - */ - memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR2_PRELIM; - memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V); + /* + * Final mapping + */ + memctl->memc_or2 = ((-size) & 0xFFFF0000) | CFG_OR2_PRELIM; + memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V); - udelay(10000); + udelay (10000); - /* prepare pin multiplexing for fast ethernet */ + /* prepare pin multiplexing for fast ethernet */ - atmLoad(); - fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ - iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ + atmLoad (); + fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ + iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ - return (size); + return (size); } /* ------------------------------------------------------------------------- */ @@ -191,46 +192,15 @@ long int initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + memctl->memc_mamr = mamr_value; - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } /* @@ -239,79 +209,78 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize int checkboard (void) { - return (0); + return (0); } -void board_serial_init(void) +void board_serial_init (void) { - ;/* nothing to do here */ + ; /* nothing to do here */ } -void board_ether_init(void) +void board_ether_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile iop8xx_t *iop = &immap->im_ioport; - volatile fec_t *fecp = &immap->im_cpm.cp_fec; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile iop8xx_t *iop = &immap->im_ioport; + volatile fec_t *fecp = &immap->im_cpm.cp_fec; - atmLoad(); - fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ - iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ + atmLoad (); + fecp->fec_ecntrl = 0x00000004; /* rev D3 pinmux SET */ + iop->iop_pdpar |= 0x0080; /* set pin as MII_clock */ } int board_pre_init (void) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile iop8xx_t *iop = &immap->im_ioport; - - /* configure the LED timing output pins - port A pin 4 */ - iop->iop_papar = 0x0800; - iop->iop_padir = 0x0800; - - /* start timer 2 for the 4hz LED blink rate */ - timers->cpmt_tmr2 = 0xff2c; /* 4hz for 64mhz */ - timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */ - timers->cpmt_tgcr = 0x00000810; /* run timer 2 */ - - /* chip select for PLD access */ - memctl->memc_br6 = 0x10000401; - memctl->memc_or6 = 0xFC000908; - - /* PLD initial values ( set LEDs, remove reset on LXT) */ - - *PLD_GCR1_REG = 0x06; - *PLD_EXT_RES = 0xC0; - *PLD_EXT_FETH = 0x40; - *PLD_EXT_LED = 0xFF; - *PLD_EXT_X21 = 0x04; - return 0; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile iop8xx_t *iop = &immap->im_ioport; + + /* configure the LED timing output pins - port A pin 4 */ + iop->iop_papar = 0x0800; + iop->iop_padir = 0x0800; + + /* start timer 2 for the 4hz LED blink rate */ + timers->cpmt_tmr2 = 0xff2c; /* 4hz for 64mhz */ + timers->cpmt_trr2 = 0x000003d0; /* clk/16 , prescale=256 */ + timers->cpmt_tgcr = 0x00000810; /* run timer 2 */ + + /* chip select for PLD access */ + memctl->memc_br6 = 0x10000401; + memctl->memc_or6 = 0xFC000908; + + /* PLD initial values ( set LEDs, remove reset on LXT) */ + + *PLD_GCR1_REG = 0x06; + *PLD_EXT_RES = 0xC0; + *PLD_EXT_FETH = 0x40; + *PLD_EXT_LED = 0xFF; + *PLD_EXT_X21 = 0x04; + return 0; } -void board_get_enetaddr (uchar *addr) +void board_get_enetaddr (uchar * addr) { - int i; - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile cpm8xx_t *cpm = &immap->im_cpm; - unsigned int rccrtmp; - - char default_mac_addr[] = {0x00, 0x08, 0x01, 0x02, 0x03, 0x04}; - - for (i=0; i<6; i++) - addr[i] = default_mac_addr[i]; + int i; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile cpm8xx_t *cpm = &immap->im_cpm; + unsigned int rccrtmp; - printf("There is an error in the i2c driver .. /n"); - printf("You need to fix it first....../n"); + char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 }; - rccrtmp = cpm->cp_rccr; - cpm->cp_rccr |= 0x0020; + for (i = 0; i < 6; i++) + addr[i] = default_mac_addr[i]; - i2c_reg_read(0xa0, 0); - printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n", - i2c_reg_read(0xa0, 0), i2c_reg_read(0xa0, 0), i2c_reg_read(0xa0, 0), - i2c_reg_read(0xa0, 0), i2c_reg_read(0xa0, 0), i2c_reg_read(0xa0, 0) ); + printf ("There is an error in the i2c driver .. /n"); + printf ("You need to fix it first....../n"); - cpm->cp_rccr = rccrtmp; + rccrtmp = cpm->cp_rccr; + cpm->cp_rccr |= 0x0020; + i2c_reg_read (0xa0, 0); + printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n", + i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0), + i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0), + i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0)); + cpm->cp_rccr = rccrtmp; } diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c index 9467b1faf2..d832edf825 100644 --- a/board/siemens/SCM/scm.c +++ b/board/siemens/SCM/scm.c @@ -235,13 +235,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; - ulong cnt, val; - volatile ulong *addr; volatile uint *sdmr_ptr; volatile uint *orx_ptr; + ulong maxsize, size; int i; - ulong save[32]; /* to make test non-destructive */ - ulong maxsize; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be @@ -291,41 +288,11 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; - /* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - i = 0; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size((long *)base, maxsize); - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; + *orx_ptr = orx | ~(size - 1); - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - /* Write the actual size to ORx - */ - *orx_ptr = orx | ~(cnt * sizeof (long) - 1); - return (cnt * sizeof (long)); - } - } - return (maxsize); + return (size); } /* diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c index 08dd975227..033cc368de 100644 --- a/board/siemens/pcu_e/pcu_e.c +++ b/board/siemens/pcu_e/pcu_e.c @@ -32,7 +32,7 @@ static long int dram_size (long int, long int *, long int); static void puma_status (void); static void puma_set_mode (int mode); -static int puma_init_done (void); +static int puma_init_done (void); static void puma_load (ulong addr, ulong len); /* ------------------------------------------------------------------------- */ @@ -42,13 +42,12 @@ static void puma_load (ulong addr, ulong len); /* * 50 MHz SDRAM access using UPM A */ -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ 0x1f0dfc04, 0xeeafbc04, 0x11af7c04, 0xefbeec00, - 0x1ffddc47, /* last */ + 0x1ffddc47, /* last */ /* * SDRAM Initialization (offset 5 in UPM RAM) * @@ -57,40 +56,40 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1ffddc35, 0xefceac34, 0x1f3d5c35, /* last */ + 0x1ffddc35, 0xefceac34, 0x1f3d5c35, /* last */ /* * Burst Read. (Offset 8 in UPM RAM) */ 0x1f0dfc04, 0xeeafbc04, 0x10af7c04, 0xf0affc00, - 0xf0affc00, 0xf1affc00, 0xefbeec00, 0x1ffddc47, /* last */ + 0xf0affc00, 0xf1affc00, 0xefbeec00, 0x1ffddc47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPM RAM) */ - 0x1f0dfc04, 0xeeafac00, 0x01be4c04, 0x1ffddc47, /* last */ + 0x1f0dfc04, 0xeeafac00, 0x01be4c04, 0x1ffddc47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ 0x1f0dfc04, 0xeeafac00, 0x10af5c00, 0xf0affc00, - 0xf0affc00, 0xe1beec04, 0x1ffddc47, /* last */ - _NOT_USED_, + 0xf0affc00, 0xe1beec04, 0x1ffddc47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPM RAM) */ 0x1ffd7c84, 0xfffffc04, 0xfffffc04, 0xfffffc04, - 0xfffffc84, 0xfffffc07, /* last */ - _NOT_USED_, _NOT_USED_, + 0xfffffc84, 0xfffffc07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPM RAM) */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7ffffc07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -98,8 +97,7 @@ const uint sdram_table[] = /* * PUMA access using UPM B */ -const uint puma_table[] = -{ +const uint puma_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ @@ -108,7 +106,7 @@ const uint puma_table[] = /* * Precharge and MRS */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Read. (Offset 8 in UPM RAM) */ @@ -119,8 +117,8 @@ const uint puma_table[] = /* * Single Write. (Offset 18 in UPM RAM) */ - 0x0ffff804, 0x0ffff400, 0x3ffffc47, /* last */ - _NOT_USED_, + 0x0ffff804, 0x0ffff400, 0x3ffffc47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) @@ -138,8 +136,8 @@ const uint puma_table[] = /* * Exception. (Offset 3c in UPM RAM) */ - 0x7ffffc07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7ffffc07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -158,115 +156,118 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ -long int -initdram (int board_type) +long int initdram (int board_type) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - long int size_b0, reg; - int i; + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; + long int size_b0, reg; + int i; - /* - * Configure UPMA for SDRAM - */ - upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + /* + * Configure UPMA for SDRAM + */ + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CFG_MPTPR; - /* burst length=4, burst type=sequential, CAS latency=2 */ - memctl->memc_mar = 0x00000088; + /* burst length=4, burst type=sequential, CAS latency=2 */ + memctl->memc_mar = 0x00000088; - /* - * Map controller bank 2 to the SDRAM bank at preliminary address. - */ + /* + * Map controller bank 2 to the SDRAM bank at preliminary address. + */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - memctl->memc_or5 = CFG_OR5_PRELIM; - memctl->memc_br5 = CFG_BR5_PRELIM; -#else /* XXX */ - memctl->memc_or2 = CFG_OR2_PRELIM; - memctl->memc_br2 = CFG_BR2_PRELIM; -#endif /* XXX */ + memctl->memc_or5 = CFG_OR5_PRELIM; + memctl->memc_br5 = CFG_BR5_PRELIM; +#else /* XXX */ + memctl->memc_or2 = CFG_OR2_PRELIM; + memctl->memc_br2 = CFG_BR2_PRELIM; +#endif /* XXX */ - /* initialize memory address register */ - memctl->memc_mamr = CFG_MAMR; /* refresh not enabled yet */ + /* initialize memory address register */ + memctl->memc_mamr = CFG_MAMR; /* refresh not enabled yet */ - /* mode initialization (offset 5) */ + /* mode initialization (offset 5) */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - udelay(200); /* 0x8000A105 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF(1) | MCR_MAD(0x05); -#else /* XXX */ - udelay(200); /* 0x80004105 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF(1) | MCR_MAD(0x05); -#endif /* XXX */ - - /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ + udelay (200); /* 0x8000A105 */ + memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF (1) | MCR_MAD (0x05); +#else /* XXX */ + udelay (200); /* 0x80004105 */ + memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF (1) | MCR_MAD (0x05); +#endif /* XXX */ + + /* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - udelay(1); /* 0x8000A830 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF(8) | MCR_MAD(0x30); -#else /* XXX */ - udelay(1); /* 0x80004830 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF(8) | MCR_MAD(0x30); -#endif /* XXX */ + udelay (1); /* 0x8000A830 */ + memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF (8) | MCR_MAD (0x30); +#else /* XXX */ + udelay (1); /* 0x80004830 */ + memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF (8) | MCR_MAD (0x30); +#endif /* XXX */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - udelay(1); /* 0x8000A106 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF(1) | MCR_MAD(0x06); -#else /* XXX */ - udelay(1); /* 0x80004106 */ - memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF(1) | MCR_MAD(0x06); -#endif /* XXX */ - - reg = memctl->memc_mamr; - reg &= ~MAMR_TLFA_MSK; /* switch timer loop ... */ - reg |= MAMR_TLFA_4X; /* ... to 4x */ - reg |= MAMR_PTAE; /* enable refresh */ - memctl->memc_mamr = reg; - - udelay(200); - - /* Need at least 10 DRAM accesses to stabilize */ - for (i=0; i<10; ++i) { + udelay (1); /* 0x8000A106 */ + memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS5 | MCR_MLCF (1) | MCR_MAD (0x06); +#else /* XXX */ + udelay (1); /* 0x80004106 */ + memctl->memc_mcr = MCR_OP_RUN | MCR_MB_CS2 | MCR_MLCF (1) | MCR_MAD (0x06); +#endif /* XXX */ + + reg = memctl->memc_mamr; + reg &= ~MAMR_TLFA_MSK; /* switch timer loop ... */ + reg |= MAMR_TLFA_4X; /* ... to 4x */ + reg |= MAMR_PTAE; /* enable refresh */ + memctl->memc_mamr = reg; + + udelay (200); + + /* Need at least 10 DRAM accesses to stabilize */ + for (i = 0; i < 10; ++i) { #if PCU_E_WITH_SWAPPED_CS /* XXX */ - volatile unsigned long *addr = (volatile unsigned long *)SDRAM_BASE5_PRELIM; -#else /* XXX */ - volatile unsigned long *addr = (volatile unsigned long *)SDRAM_BASE2_PRELIM; -#endif /* XXX */ - unsigned long val; - - val = *(addr + i); - *(addr + i) = val; - } - - /* - * Check Bank 0 Memory Size for re-configuration - */ + volatile unsigned long *addr = + (volatile unsigned long *) SDRAM_BASE5_PRELIM; +#else /* XXX */ + volatile unsigned long *addr = + (volatile unsigned long *) SDRAM_BASE2_PRELIM; +#endif /* XXX */ + unsigned long val; + + val = *(addr + i); + *(addr + i) = val; + } + + /* + * Check Bank 0 Memory Size for re-configuration + */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - size_b0 = dram_size (CFG_MAMR, (ulong *)SDRAM_BASE5_PRELIM, SDRAM_MAX_SIZE); -#else /* XXX */ - size_b0 = dram_size (CFG_MAMR, (ulong *)SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); -#endif /* XXX */ + size_b0 = dram_size (CFG_MAMR, (ulong *) SDRAM_BASE5_PRELIM, SDRAM_MAX_SIZE); +#else /* XXX */ + size_b0 = dram_size (CFG_MAMR, (ulong *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); +#endif /* XXX */ - memctl->memc_mamr = CFG_MAMR | MAMR_PTAE; + memctl->memc_mamr = CFG_MAMR | MAMR_PTAE; - /* - * Final mapping: - */ + /* + * Final mapping: + */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - memctl->memc_or5 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING; - memctl->memc_br5 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; -#else /* XXX */ - memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING; - memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; -#endif /* XXX */ - udelay(1000); - - /* - * Configure UPMB for PUMA - */ - upmconfig(UPMB, (uint *)puma_table, sizeof(puma_table)/sizeof(uint)); - - return (size_b0); + memctl->memc_or5 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING; + memctl->memc_br5 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; +#else /* XXX */ + memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | SDRAM_TIMING; + memctl->memc_br2 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; +#endif /* XXX */ + udelay (1000); + + /* + * Configure UPMB for PUMA + */ + upmconfig (UPMB, (uint *) puma_table, + sizeof (puma_table) / sizeof (uint)); + + return (size_b0); } /* ------------------------------------------------------------------------- */ @@ -279,119 +280,88 @@ initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immr->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immr->im_memctl; - val = *addr; - *addr = save[--i]; + memctl->memc_mamr = mamr_value; - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } /* ------------------------------------------------------------------------- */ -#if PCU_E_WITH_SWAPPED_CS /* XXX */ +#if PCU_E_WITH_SWAPPED_CS /* XXX */ #define ETH_CFG_BITS (CFG_PB_ETH_CFG1 | CFG_PB_ETH_CFG2 | CFG_PB_ETH_CFG3 ) -#else /* XXX */ +#else /* XXX */ #define ETH_CFG_BITS (CFG_PB_ETH_MDDIS | CFG_PB_ETH_CFG1 | \ CFG_PB_ETH_CFG2 | CFG_PB_ETH_CFG3 ) #endif /* XXX */ #define ETH_ALL_BITS (ETH_CFG_BITS | CFG_PB_ETH_POWERDOWN | CFG_PB_ETH_RESET) -void reset_phy(void) +void reset_phy (void) { - immap_t *immr = (immap_t *)CFG_IMMR; + immap_t *immr = (immap_t *) CFG_IMMR; ulong value; /* Configure all needed port pins for GPIO */ -#if PCU_E_WITH_SWAPPED_CS /* XXX */ +#if PCU_E_WITH_SWAPPED_CS /* XXX */ # if CFG_ETH_MDDIS_VALUE - immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS; + immr->im_ioport.iop_padat |= CFG_PA_ETH_MDDIS; # else immr->im_ioport.iop_padat &= ~(CFG_PA_ETH_MDDIS); /* Set low */ # endif immr->im_ioport.iop_papar &= ~(CFG_PA_ETH_MDDIS); /* GPIO */ immr->im_ioport.iop_paodr &= ~(CFG_PA_ETH_MDDIS); /* active output */ - immr->im_ioport.iop_padir |= CFG_PA_ETH_MDDIS; /* output */ + immr->im_ioport.iop_padir |= CFG_PA_ETH_MDDIS; /* output */ #endif /* XXX */ immr->im_cpm.cp_pbpar &= ~(ETH_ALL_BITS); /* GPIO */ immr->im_cpm.cp_pbodr &= ~(ETH_ALL_BITS); /* active output */ - value = immr->im_cpm.cp_pbdat; + value = immr->im_cpm.cp_pbdat; /* Assert Powerdown and Reset signals */ - value |= CFG_PB_ETH_POWERDOWN; + value |= CFG_PB_ETH_POWERDOWN; value &= ~(CFG_PB_ETH_RESET); /* PHY configuration includes MDDIS and CFG1 ... CFG3 */ #if !PCU_E_WITH_SWAPPED_CS # if CFG_ETH_MDDIS_VALUE - value |= CFG_PB_ETH_MDDIS; + value |= CFG_PB_ETH_MDDIS; # else value &= ~(CFG_PB_ETH_MDDIS); # endif #endif #if CFG_ETH_CFG1_VALUE - value |= CFG_PB_ETH_CFG1; + value |= CFG_PB_ETH_CFG1; #else value &= ~(CFG_PB_ETH_CFG1); #endif #if CFG_ETH_CFG2_VALUE - value |= CFG_PB_ETH_CFG2; + value |= CFG_PB_ETH_CFG2; #else value &= ~(CFG_PB_ETH_CFG2); #endif #if CFG_ETH_CFG3_VALUE - value |= CFG_PB_ETH_CFG3; + value |= CFG_PB_ETH_CFG3; #else value &= ~(CFG_PB_ETH_CFG3); #endif /* Drive output signals to initial state */ - immr->im_cpm.cp_pbdat = value; + immr->im_cpm.cp_pbdat = value; immr->im_cpm.cp_pbdir |= ETH_ALL_BITS; udelay (10000); /* De-assert Ethernet Powerdown */ - immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ + immr->im_cpm.cp_pbdat &= ~(CFG_PB_ETH_POWERDOWN); /* Enable PHY power */ udelay (10000); /* de-assert RESET signal of PHY */ - immr->im_cpm.cp_pbdat |= CFG_PB_ETH_RESET; + immr->im_cpm.cp_pbdat |= CFG_PB_ETH_RESET; udelay (1000); } @@ -403,23 +373,23 @@ void reset_phy(void) #define PUMA_READ_MODE 0 #define PUMA_LOAD_MODE 1 -int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { ulong addr, len; switch (argc) { - case 2: /* PUMA reset */ - if (strncmp(argv[1], "stat", 4) == 0) { /* Reset */ + case 2: /* PUMA reset */ + if (strncmp (argv[1], "stat", 4) == 0) { /* Reset */ puma_status (); return 0; } break; - case 4: /* PUMA load addr len */ - if (strcmp(argv[1],"load") != 0) + case 4: /* PUMA load addr len */ + if (strcmp (argv[1], "load") != 0) break; - addr = simple_strtoul(argv[2], NULL, 16); - len = simple_strtoul(argv[3], NULL, 16); + addr = simple_strtoul (argv[2], NULL, 16); + len = simple_strtoul (argv[3], NULL, 16); printf ("PUMA load: addr %08lX len %ld (0x%lX): ", addr, len, len); @@ -432,47 +402,46 @@ int do_puma (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) printf ("Usage:\n%s\n", cmdtp->usage); return 1; } -U_BOOT_CMD( - puma, 4, 1, do_puma, - "puma - access PUMA FPGA\n", - "status - print PUMA status\n" - "puma load addr len - load PUMA configuration data\n" -); -#endif /* CFG_CMD_BSP */ +U_BOOT_CMD (puma, 4, 1, do_puma, + "puma - access PUMA FPGA\n", + "status - print PUMA status\n" + "puma load addr len - load PUMA configuration data\n"); + +#endif /* CFG_CMD_BSP */ /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ static void puma_set_mode (int mode) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immr->im_memctl; /* disable PUMA in memory controller */ #if PCU_E_WITH_SWAPPED_CS /* XXX */ - memctl->memc_br3 = 0; -#else /* XXX */ - memctl->memc_br4 = 0; -#endif /* XXX */ + memctl->memc_br3 = 0; +#else /* XXX */ + memctl->memc_br4 = 0; +#endif /* XXX */ switch (mode) { case PUMA_READ_MODE: #if PCU_E_WITH_SWAPPED_CS /* XXX */ memctl->memc_or3 = PUMA_CONF_OR_READ; memctl->memc_br3 = PUMA_CONF_BR_READ; -#else /* XXX */ +#else /* XXX */ memctl->memc_or4 = PUMA_CONF_OR_READ; memctl->memc_br4 = PUMA_CONF_BR_READ; -#endif /* XXX */ +#endif /* XXX */ break; case PUMA_LOAD_MODE: #if PCU_E_WITH_SWAPPED_CS /* XXX */ memctl->memc_or3 = PUMA_CONF_OR_LOAD; memctl->memc_br3 = PUMA_CONF_BR_LOAD; -#else /* XXX */ +#else /* XXX */ memctl->memc_or4 = PUMA_CONF_OR_READ; memctl->memc_br4 = PUMA_CONF_BR_READ; -#endif /* XXX */ +#endif /* XXX */ break; } } @@ -483,9 +452,9 @@ static void puma_set_mode (int mode) static void puma_load (ulong addr, ulong len) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; - volatile uchar *fpga_addr = (volatile uchar *)PUMA_CONF_BASE; /* XXX ??? */ - uchar *data = (uchar *)addr; + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile uchar *fpga_addr = (volatile uchar *) PUMA_CONF_BASE; /* XXX ??? */ + uchar *data = (uchar *) addr; int i; /* align length */ @@ -497,7 +466,7 @@ static void puma_load (ulong addr, ulong len) immr->im_ioport.iop_pcso &= ~(CFG_PC_PUMA_INIT); immr->im_ioport.iop_pcdir &= ~(CFG_PC_PUMA_INIT); -#if PCU_E_WITH_SWAPPED_CS /* XXX */ +#if PCU_E_WITH_SWAPPED_CS /* XXX */ immr->im_cpm.cp_pbpar &= ~(CFG_PB_PUMA_PROG); /* GPIO */ immr->im_cpm.cp_pbodr &= ~(CFG_PB_PUMA_PROG); /* active output */ immr->im_cpm.cp_pbdat &= ~(CFG_PB_PUMA_PROG); /* Set low */ @@ -510,14 +479,14 @@ static void puma_load (ulong addr, ulong len) #endif /* XXX */ udelay (100); -#if PCU_E_WITH_SWAPPED_CS /* XXX */ - immr->im_cpm.cp_pbdat |= CFG_PB_PUMA_PROG; /* release reset */ +#if PCU_E_WITH_SWAPPED_CS /* XXX */ + immr->im_cpm.cp_pbdat |= CFG_PB_PUMA_PROG; /* release reset */ #else - immr->im_ioport.iop_padat |= CFG_PA_PUMA_PROG; /* release reset */ + immr->im_ioport.iop_padat |= CFG_PA_PUMA_PROG; /* release reset */ #endif /* XXX */ /* wait until INIT indicates completion of reset */ - for (i=0; i<PUMA_INIT_TIMEOUT; ++i) { + for (i = 0; i < PUMA_INIT_TIMEOUT; ++i) { udelay (1000); if (immr->im_ioport.iop_pcdat & CFG_PC_PUMA_INIT) break; @@ -543,18 +512,18 @@ static void puma_status (void) { /* Check state */ printf ("PUMA initialization is %scomplete\n", - puma_init_done() ? "" : "NOT "); + puma_init_done ()? "" : "NOT "); } /* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */ static int puma_init_done (void) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; /* make sure pin is GPIO input */ immr->im_ioport.iop_pcpar &= ~(CFG_PC_PUMA_DONE); - immr->im_ioport.iop_pcso &= ~(CFG_PC_PUMA_DONE); + immr->im_ioport.iop_pcso &= ~(CFG_PC_PUMA_DONE); immr->im_ioport.iop_pcdir &= ~(CFG_PC_PUMA_DONE); return (immr->im_ioport.iop_pcdat & CFG_PC_PUMA_DONE) ? 1 : 0; @@ -565,20 +534,20 @@ static int puma_init_done (void) int misc_init_r (void) { ulong addr = 0; - ulong len = 0; + ulong len = 0; char *s; printf ("PUMA: "); - if (puma_init_done()) { + if (puma_init_done ()) { printf ("initialized\n"); return 0; } - if ((s = getenv("puma_addr")) != NULL) - addr = simple_strtoul(s, NULL, 16); + if ((s = getenv ("puma_addr")) != NULL) + addr = simple_strtoul (s, NULL, 16); - if ((s = getenv("puma_len")) != NULL) - len = simple_strtoul(s, NULL, 16); + if ((s = getenv ("puma_len")) != NULL) + len = simple_strtoul (s, NULL, 16); if ((!addr) || (!len)) { printf ("net list undefined\n"); diff --git a/board/sl8245/sl8245.c b/board/sl8245/sl8245.c index d5c1f34755..593eb4ee80 100644 --- a/board/sl8245/sl8245.c +++ b/board/sl8245/sl8245.c @@ -37,50 +37,24 @@ int checkboard (void) long int initdram (int board_type) { #ifndef CFG_RAMBOOT - int i, cnt; - volatile uchar * base= CFG_SDRAM_BASE; - volatile ulong * addr; - ulong save[32]; - ulong val, ret = 0; + long size; + long new_bank0_end; + long mear1; + long emear1; - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt < CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + return (size); #else return CFG_MAX_RAM_SIZE; #endif diff --git a/board/snmc/qs850/qs850.c b/board/snmc/qs850/qs850.c index 7448eb112e..105eeb8eb8 100644 --- a/board/snmc/qs850/qs850.c +++ b/board/snmc/qs850/qs850.c @@ -222,32 +222,8 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize { volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - long int cnt, val; memctl->memc_mamr = mamr_value; - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - return (0); - } - - for (cnt = 1; ; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - val = *addr; - - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - /* NOTREACHED */ + return (get_ram_size(base, maxsize)); } diff --git a/board/snmc/qs860t/qs860t.c b/board/snmc/qs860t/qs860t.c index c4ab758d3a..2a55157813 100644 --- a/board/snmc/qs860t/qs860t.c +++ b/board/snmc/qs860t/qs860t.c @@ -229,31 +229,8 @@ static long int dram_size (long int mbmr_value, long int *base, long int maxsize { volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - long int cnt, val; memctl->memc_mbmr = mbmr_value; - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - return (0); - } - - for (cnt = 1; ; cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - val = *addr; - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - /* NOTREACHED */ + return (get_ram_size(base, maxsize)); } diff --git a/board/spd8xx/spd8xx.c b/board/spd8xx/spd8xx.c index 239cf26398..9f52e339ba 100644 --- a/board/spd8xx/spd8xx.c +++ b/board/spd8xx/spd8xx.c @@ -34,14 +34,13 @@ static long int dram_size (long int, long int *, long int); #define _NOT_USED_ 0xFFFFFFFF -const uint sharc_table[] = -{ +const uint sharc_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ 0x0FF3FC04, 0x0FF3EC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFEC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Read. (Offset 8 in UPM RAM) */ @@ -54,8 +53,8 @@ const uint sharc_table[] = * Single Write. (Offset 18 in UPM RAM) */ 0x0FAFFC04, 0x0FAFEC00, 0x7FFFEC04, 0xFFFFEC04, - 0xFFFFEC05, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0xFFFFEC05, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ @@ -74,18 +73,17 @@ const uint sharc_table[] = /* * Exception. (Offset 3c in UPM RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; -const uint sdram_table[] = -{ +const uint sdram_table[] = { /* * Single Read. (Offset 0 in UPM RAM) */ 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, - 0x1FF77C47, /* last */ + 0x1FF77C47, /* last */ /* * SDRAM Initialization (offset 5 in UPM RAM) * @@ -94,39 +92,39 @@ const uint sdram_table[] = * sequence, which is executed by a RUN command. * */ - 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ + 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ /* * Burst Read. (Offset 8 in UPM RAM) */ 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, - 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ + 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Single Write. (Offset 18 in UPM RAM) */ - 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ + 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Burst Write. (Offset 20 in UPM RAM) */ 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, - 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ - _NOT_USED_, + 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Refresh (Offset 30 in UPM RAM) */ 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, - 0xFFFFFC84, 0xFFFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, /* * Exception. (Offset 3c in UPM RAM) */ - 0x7FFFFC07, /* last */ - _NOT_USED_, _NOT_USED_, _NOT_USED_, + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, }; /* ------------------------------------------------------------------------- */ @@ -145,71 +143,74 @@ int checkboard (void) /* ------------------------------------------------------------------------- */ -long int -initdram (int board_type) +long int initdram (int board_type) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - long int size_b0; + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0; #if 0 - /* - * Map controller bank 2 to the SRAM bank at preliminary address. - */ - memctl->memc_or2 = CFG_OR2; - memctl->memc_br2 = CFG_BR2; + /* + * Map controller bank 2 to the SRAM bank at preliminary address. + */ + memctl->memc_or2 = CFG_OR2; + memctl->memc_br2 = CFG_BR2; #endif - /* - * Map controller bank 4 to the PER8 bank. - */ - memctl->memc_or4 = CFG_OR4; - memctl->memc_br4 = CFG_BR4; + /* + * Map controller bank 4 to the PER8 bank. + */ + memctl->memc_or4 = CFG_OR4; + memctl->memc_br4 = CFG_BR4; #if 0 - /* Configure SHARC at UMA */ - upmconfig(UPMA, (uint *)sharc_table, sizeof(sharc_table)/sizeof(uint)); - /* Map controller bank 5 to the SHARC */ - memctl->memc_or5 = CFG_OR5; - memctl->memc_br5 = CFG_BR5; + /* Configure SHARC at UMA */ + upmconfig (UPMA, (uint *) sharc_table, + sizeof (sharc_table) / sizeof (uint)); + /* Map controller bank 5 to the SHARC */ + memctl->memc_or5 = CFG_OR5; + memctl->memc_br5 = CFG_BR5; #endif - memctl->memc_mamr = 0x00001000; + memctl->memc_mamr = 0x00001000; - /* Configure SDRAM at UMB */ - upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint)); + /* Configure SDRAM at UMB */ + upmconfig (UPMB, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); - memctl->memc_mptpr = CFG_MPTPR_1BK_8K; + memctl->memc_mptpr = CFG_MPTPR_1BK_8K; - memctl->memc_mar = 0x00000088; + memctl->memc_mar = 0x00000088; - /* - * Map controller bank 3 to the SDRAM bank at preliminary address. - */ - memctl->memc_or3 = CFG_OR3_PRELIM; - memctl->memc_br3 = CFG_BR3_PRELIM; + /* + * Map controller bank 3 to the SDRAM bank at preliminary address. + */ + memctl->memc_or3 = CFG_OR3_PRELIM; + memctl->memc_br3 = CFG_BR3_PRELIM; - memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ + memctl->memc_mbmr = CFG_MBMR_8COL; /* refresh not enabled yet */ - udelay(200); - memctl->memc_mcr = 0x80806105; - udelay(1); - memctl->memc_mcr = 0x80806130; - udelay(1); - memctl->memc_mcr = 0x80806130; - udelay(1); - memctl->memc_mcr = 0x80806106; + udelay (200); + memctl->memc_mcr = 0x80806105; + udelay (1); + memctl->memc_mcr = 0x80806130; + udelay (1); + memctl->memc_mcr = 0x80806130; + udelay (1); + memctl->memc_mcr = 0x80806106; - memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ + memctl->memc_mbmr |= MBMR_PTBE; /* refresh enabled */ - /* - * Check Bank 0 Memory Size for re-configuration - */ - size_b0 = dram_size (CFG_MBMR_8COL, (ulong *)SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE); + /* + * Check Bank 0 Memory Size for re-configuration + */ + size_b0 = + dram_size (CFG_MBMR_8COL, (ulong *) SDRAM_BASE3_PRELIM, + SDRAM_MAX_SIZE); - memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; + memctl->memc_mbmr = CFG_MBMR_8COL | MBMR_PTBE; - return (size_b0); + return (size_b0); } /* ------------------------------------------------------------------------- */ @@ -222,60 +223,29 @@ initdram (int board_type) * - short between data lines */ -static long int dram_size (long int mamr_value, long int *base, long int maxsize) +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) { - volatile immap_t *immap = (immap_t *)CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mbmr = mamr_value; - - for (cnt = maxsize/sizeof(long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize/sizeof(long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; - val = *addr; - *addr = save[--i]; + memctl->memc_mbmr = mamr_value; - if (val != (~cnt)) { - return (cnt * sizeof(long)); - } - } - return (maxsize); + return (get_ram_size (base, maxsize)); } /* ------------------------------------------------------------------------- */ -void reset_phy(void) +void reset_phy (void) { - immap_t *immr = (immap_t *)CFG_IMMR; + immap_t *immr = (immap_t *) CFG_IMMR; ushort sreg; /* Configure extra port pins for NS DP83843 PHY */ immr->im_ioport.iop_papar &= ~(PA_ENET_MDC | PA_ENET_MDIO); - sreg = immr->im_ioport.iop_padir; - sreg |= PA_ENET_MDC; /* Mgmt. Data Clock is Output */ + sreg = immr->im_ioport.iop_padir; + sreg |= PA_ENET_MDC; /* Mgmt. Data Clock is Output */ sreg &= ~(PA_ENET_MDIO); /* Mgmt. Data I/O is bidirect. => Input */ immr->im_ioport.iop_padir = sreg; @@ -288,23 +258,23 @@ void reset_phy(void) * Configure RESET pins for NS DP83843 PHY, and RESET chip. * * Note: The RESET pin is high active, but there is an - * inverter on the SPD823TS board... + * inverter on the SPD823TS board... */ immr->im_ioport.iop_pcpar &= ~(PC_ENET_RESET); - immr->im_ioport.iop_pcdir |= PC_ENET_RESET; + immr->im_ioport.iop_pcdir |= PC_ENET_RESET; /* assert RESET signal of PHY */ immr->im_ioport.iop_pcdat &= ~(PC_ENET_RESET); udelay (10); /* de-assert RESET signal of PHY */ - immr->im_ioport.iop_pcdat |= PC_ENET_RESET; + immr->im_ioport.iop_pcdat |= PC_ENET_RESET; udelay (10); } /* ------------------------------------------------------------------------- */ -void ide_set_reset(int on) +void ide_set_reset (int on) { - volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile immap_t *immr = (immap_t *) CFG_IMMR; /* * Configure PC for IDE Reset Pin @@ -312,13 +282,13 @@ void ide_set_reset(int on) if (on) { /* assert RESET */ immr->im_ioport.iop_pcdat &= ~(CFG_PC_IDE_RESET); } else { /* release RESET */ - immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcdat |= CFG_PC_IDE_RESET; } /* program port pin as GPIO output */ immr->im_ioport.iop_pcpar &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); - immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; + immr->im_ioport.iop_pcso &= ~(CFG_PC_IDE_RESET); + immr->im_ioport.iop_pcdir |= CFG_PC_IDE_RESET; } /* ------------------------------------------------------------------------- */ diff --git a/board/tqm8260/tqm8260.c b/board/tqm8260/tqm8260.c index f716cf25ad..22919873d1 100644 --- a/board/tqm8260/tqm8260.c +++ b/board/tqm8260/tqm8260.c @@ -224,13 +224,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, ulong orx, volatile uchar * base) { volatile uchar c = 0xff; - ulong cnt, val; - volatile ulong *addr; volatile uint *sdmr_ptr; volatile uint *orx_ptr; - int i; - ulong save[32]; /* to make test non-destructive */ ulong maxsize, size; + int i; /* We must be able to test a location outsize the maximum legal size * to find out THAT we are outside; but this address still has to be @@ -280,52 +277,10 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, *sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN; *base = c; - /* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ - i = 0; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - save[i++] = *addr; - *addr = ~cnt; - } + size = get_ram_size((long *)base, maxsize); + *orx_ptr = orx | ~(size - 1); - addr = (volatile ulong *) base; - save[i] = *addr; - *addr = 0; - - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; /* pointer arith! */ - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - size = cnt * sizeof (long); - /* Restore the original data before leaving the function. */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - /* Write the actual size to ORx - */ - *orx_ptr = orx | ~(size - 1); - return (size); - } - } - return (maxsize); + return (size); } long int initdram (int board_type) diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c index c6b53ab6dc..18201f67db 100644 --- a/board/tqm8xx/tqm8xx.c +++ b/board/tqm8xx/tqm8xx.c @@ -398,55 +398,10 @@ static long int dram_size (long int mamr_value, long int *base, long int maxsize { volatile immap_t *immap = (immap_t *) CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val, size; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; memctl->memc_mamr = mamr_value; - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - /* Restore the original data before leaving the function. - */ - *addr = save[i]; - for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - size = cnt * sizeof (long); - /* Restore the original data before returning - */ - for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = (volatile ulong *) base + cnt; - *addr = save[--i]; - } - return (size); - } - } - return (maxsize); + return (get_ram_size(base, maxsize)); } /* ------------------------------------------------------------------------- */ diff --git a/board/utx8245/utx8245.c b/board/utx8245/utx8245.c index 38c427a4a0..39dc7fb77f 100644 --- a/board/utx8245/utx8245.c +++ b/board/utx8245/utx8245.c @@ -49,11 +49,10 @@ int checkboard(void) long int initdram(int board_type) { #if 1 - int i, cnt; - volatile uchar *base = CFG_SDRAM_BASE; - volatile ulong *addr; - ulong save[SAVE_SZ]; - ulong val, ret = 0; + long size; + long new_bank0_end; + long mear1; + long emear1; /* write_bat(IBAT1, ((CFG_MAX_RAM_SIZE/2) | BATU_BL_256M | BATU_VS | BATU_VP), ( (CFG_MAX_RAM_SIZE/2)| BATL_PP_10 | BATL_MEMCOHERENCE)); @@ -61,48 +60,19 @@ long int initdram(int board_type) write_bat(DBAT1, ((CFG_MAX_RAM_SIZE/2) | BATU_BL_256M | BATU_VS | BATU_VP), ( (CFG_MAX_RAM_SIZE/2)| BATL_PP_10 | BATL_MEMCOHERENCE)); */ - for (i=0; i<SAVE_SZ; i++) { - save[i] = 0; /* clear table */ - } - - for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) { - addr = (volatile ulong *)base + cnt; - save[i++] = *addr; - *addr = ~cnt; - } - - addr = (volatile ulong *)base; - save[i] = *addr; - *addr = 0; - - if (*addr != 0) { - *addr = save[i]; - goto Done; - } - - for (cnt = 1; cnt < CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) { - addr = (volatile ulong *)base + cnt; - val = *addr; - *addr = save[--i]; - if (val != ~cnt) { - ulong new_bank0_end = cnt * sizeof(long) - 1; - ulong mear1 = mpc824x_mpc107_getreg(MEAR1); - ulong emear1 = mpc824x_mpc107_getreg(EMEAR1); - mear1 = (mear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); - emear1 = (emear1 & 0xFFFFFF00) | - ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); - mpc824x_mpc107_setreg(MEAR1, mear1); - mpc824x_mpc107_setreg(EMEAR1, emear1); - - ret = cnt * sizeof(long); - goto Done; - } - } - - ret = CFG_MAX_RAM_SIZE; -Done: - return ret; + size = get_ram_size(CFG_SDRAM_BASE, CFG_MAX_RAM_SIZE); + + new_bank0_end = size - 1; + mear1 = mpc824x_mpc107_getreg(MEAR1); + emear1 = mpc824x_mpc107_getreg(EMEAR1); + mear1 = (mear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT); + emear1 = (emear1 & 0xFFFFFF00) | + ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT); + mpc824x_mpc107_setreg(MEAR1, mear1); + mpc824x_mpc107_setreg(EMEAR1, emear1); + + return (size); #else return (CFG_MAX_RAM_SIZE); #endif diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c index bb52236d69..924a449eb8 100644 --- a/board/w7o/w7o.c +++ b/board/w7o/w7o.c @@ -30,7 +30,7 @@ #include "errors.h" #include <watchdog.h> -unsigned long get_dram_size(void); +unsigned long get_dram_size (void); /* * Macros to transform values @@ -44,78 +44,78 @@ unsigned long get_dram_size(void); int board_pre_init (void) { #if defined(CONFIG_W7OLMG) - /* - * Setup GPIO pins - reset devices. - */ - out32(IBM405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */ - out32(IBM405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */ - out32(IBM405GP_GPIO0_TCR, 0x7f800000); /* setup for output */ - - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) XILINX; active low; level sensitive - * IRQ 26 (EXT IRQ 1) PCI INT A; active low; level sensitive - * IRQ 27 (EXT IRQ 2) PCI INT B; active low; level sensitive - * IRQ 28 (EXT IRQ 3) SAM 2; active low; level sensitive - * IRQ 29 (EXT IRQ 4) Battery Bad; active low; level sensitive - * IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive - * IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive - */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0, - INT0 highest priority*/ - - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + /* + * Setup GPIO pins - reset devices. + */ + out32 (IBM405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */ + out32 (IBM405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */ + out32 (IBM405GP_GPIO0_TCR, 0x7f800000); /* setup for output */ + + /* + * IRQ 0-15 405GP internally generated; active high; level sensitive + * IRQ 16 405GP internally generated; active low; level sensitive + * IRQ 17-24 RESERVED + * IRQ 25 (EXT IRQ 0) XILINX; active low; level sensitive + * IRQ 26 (EXT IRQ 1) PCI INT A; active low; level sensitive + * IRQ 27 (EXT IRQ 2) PCI INT B; active low; level sensitive + * IRQ 28 (EXT IRQ 3) SAM 2; active low; level sensitive + * IRQ 29 (EXT IRQ 4) Battery Bad; active low; level sensitive + * IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive + * IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive + */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0, + INT0 highest priority */ + + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ #elif defined(CONFIG_W7OLMC) - /* - * Setup GPIO pins - */ - out32(IBM405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */ - out32(IBM405GP_GPIO0_OR, 0x03800000); /* set out pins to default */ - out32(IBM405GP_GPIO0_TCR, 0x66C00000); /* setup for output */ - - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) DBE 0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) DBE 1; active low; level sensitive - * IRQ 27 (EXT IRQ 2) DBE 2; active low; level sensitive - * IRQ 28 (EXT IRQ 3) DBE Common; active low; level sensitive - * IRQ 29 (EXT IRQ 4) PCI; active low; level sensitive - * IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive - * IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive - */ - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - mtdcr(uicer, 0x00000000); /* disable all ints */ - - mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ - mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ - mtdcr(uictr, 0x10000000); /* set int trigger levels */ - mtdcr(uicvcr, 0x00000001); /* set vect base=0, - INT0 highest priority*/ - - mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ - -#else /* Unknown */ + /* + * Setup GPIO pins + */ + out32 (IBM405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */ + out32 (IBM405GP_GPIO0_OR, 0x03800000); /* set out pins to default */ + out32 (IBM405GP_GPIO0_TCR, 0x66C00000); /* setup for output */ + + /* + * IRQ 0-15 405GP internally generated; active high; level sensitive + * IRQ 16 405GP internally generated; active low; level sensitive + * IRQ 17-24 RESERVED + * IRQ 25 (EXT IRQ 0) DBE 0; active low; level sensitive + * IRQ 26 (EXT IRQ 1) DBE 1; active low; level sensitive + * IRQ 27 (EXT IRQ 2) DBE 2; active low; level sensitive + * IRQ 28 (EXT IRQ 3) DBE Common; active low; level sensitive + * IRQ 29 (EXT IRQ 4) PCI; active low; level sensitive + * IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive + * IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive + */ + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr (uicer, 0x00000000); /* disable all ints */ + + mtdcr (uiccr, 0x00000000); /* set all to be non-critical */ + mtdcr (uicpr, 0xFFFFFF80); /* set int polarities */ + mtdcr (uictr, 0x10000000); /* set int trigger levels */ + mtdcr (uicvcr, 0x00000001); /* set vect base=0, + INT0 highest priority */ + + mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */ + +#else /* Unknown */ # error "Unknown W7O board configuration" #endif - WATCHDOG_RESET(); /* Reset the watchdog */ - temp_uart_init(); /* init the uart for debug */ - WATCHDOG_RESET(); /* Reset the watchdog */ - test_led(); /* test the LEDs */ - test_sdram(get_dram_size()); /* test the dram */ - log_stat(ERR_POST1); /* log status,post1 complete */ - return 0; + WATCHDOG_RESET (); /* Reset the watchdog */ + temp_uart_init (); /* init the uart for debug */ + WATCHDOG_RESET (); /* Reset the watchdog */ + test_led (); /* test the LEDs */ + test_sdram (get_dram_size ()); /* test the dram */ + log_stat (ERR_POST1); /* log status,post1 complete */ + return 0; } @@ -126,146 +126,147 @@ int board_pre_init (void) */ int checkboard (void) { - VPD vpd; - - puts ("Board: "); - - /* VPD data present in I2C EEPROM */ - if (vpd_get_data(CFG_DEF_EEPROM_ADDR, &vpd) == 0) { - /* - * Known board type. - */ - if (vpd.productId[0] && - ((strncmp(vpd.productId, "GMM", 3) == 0) || - (strncmp(vpd.productId, "CMM", 3) == 0))) { - - /* Output board information on startup */ - printf("\"%s\", revision '%c', serial# %ld, manufacturer %u\n", - vpd.productId, vpd.revisionId, vpd.serialNum, vpd.manuID); - return (0); + VPD vpd; + + puts ("Board: "); + + /* VPD data present in I2C EEPROM */ + if (vpd_get_data (CFG_DEF_EEPROM_ADDR, &vpd) == 0) { + /* + * Known board type. + */ + if (vpd.productId[0] && + ((strncmp (vpd.productId, "GMM", 3) == 0) || + (strncmp (vpd.productId, "CMM", 3) == 0))) { + + /* Output board information on startup */ + printf ("\"%s\", revision '%c', serial# %ld, manufacturer %u\n", vpd.productId, vpd.revisionId, vpd.serialNum, vpd.manuID); + return (0); + } } - } - puts ("### Unknown HW ID - assuming NOTHING\n"); - return (0); + puts ("### Unknown HW ID - assuming NOTHING\n"); + return (0); } /* ------------------------------------------------------------------------- */ long int initdram (int board_type) { - return get_dram_size(); + return get_dram_size (); } unsigned long get_dram_size (void) { - int tmp, i, regs[4]; - int size = 0; + int tmp, i, regs[4]; + int size = 0; - /* Get bank Size registers */ - mtdcr(memcfga, mem_mb0cf); /* get bank 0 config reg */ - regs[0] = mfdcr(memcfgd); + /* Get bank Size registers */ + mtdcr (memcfga, mem_mb0cf); /* get bank 0 config reg */ + regs[0] = mfdcr (memcfgd); - mtdcr(memcfga, mem_mb1cf); /* get bank 1 config reg */ - regs[1] = mfdcr(memcfgd); + mtdcr (memcfga, mem_mb1cf); /* get bank 1 config reg */ + regs[1] = mfdcr (memcfgd); - mtdcr(memcfga, mem_mb2cf); /* get bank 2 config reg */ - regs[2] = mfdcr(memcfgd); + mtdcr (memcfga, mem_mb2cf); /* get bank 2 config reg */ + regs[2] = mfdcr (memcfgd); - mtdcr(memcfga, mem_mb3cf); /* get bank 3 config reg */ - regs[3] = mfdcr(memcfgd); + mtdcr (memcfga, mem_mb3cf); /* get bank 3 config reg */ + regs[3] = mfdcr (memcfgd); - /* compute the size, add each bank if enabled */ - for(i = 0; i < 4; i++) { - if (regs[i] & 0x0001) { /* if enabled, */ - tmp = ((regs[i] >> (31 - 14)) & 0x7); /* get size bits */ - tmp = 0x400000 << tmp; /* Size bits X 4MB = size */ - size += tmp; + /* compute the size, add each bank if enabled */ + for (i = 0; i < 4; i++) { + if (regs[i] & 0x0001) { /* if enabled, */ + tmp = ((regs[i] >> (31 - 14)) & 0x7); /* get size bits */ + tmp = 0x400000 << tmp; /* Size bits X 4MB = size */ + size += tmp; + } } - } - return size; + return size; } int misc_init_f (void) { - return 0; + return 0; } -static void -w7o_env_init(VPD *vpd) +static void w7o_env_init (VPD * vpd) { - /* - * Read VPD - */ - if (vpd_get_data(CFG_DEF_EEPROM_ADDR, vpd) != 0) - return; - - /* - * Known board type. - */ - if (vpd->productId[0] && - ((strncmp(vpd->productId, "GMM", 3) == 0) || - (strncmp(vpd->productId, "CMM", 3) == 0))) { - char buf[30]; - char *eth; - unsigned char *serial = getenv("serial#"); - unsigned char *ethaddr = getenv("ethaddr"); - - /* Set 'serial#' envvar if serial# isn't set */ - if (!serial) { - sprintf(buf, "%s-%ld", vpd->productId, vpd->serialNum); - setenv("serial#", buf); - } + /* + * Read VPD + */ + if (vpd_get_data (CFG_DEF_EEPROM_ADDR, vpd) != 0) + return; - /* Set 'ethaddr' envvar if 'ethaddr' envvar is the default */ - eth = vpd->ethAddrs[0]; - if (ethaddr && (strcmp(ethaddr, MK_STR(CONFIG_ETHADDR)) == 0)) { - /* Now setup ethaddr */ - sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x", - eth[0], eth[1], eth[2], eth[3], eth[4], eth[5]); - setenv("ethaddr", buf); + /* + * Known board type. + */ + if (vpd->productId[0] && + ((strncmp (vpd->productId, "GMM", 3) == 0) || + (strncmp (vpd->productId, "CMM", 3) == 0))) { + char buf[30]; + char *eth; + unsigned char *serial = getenv ("serial#"); + unsigned char *ethaddr = getenv ("ethaddr"); + + /* Set 'serial#' envvar if serial# isn't set */ + if (!serial) { + sprintf (buf, "%s-%ld", vpd->productId, + vpd->serialNum); + setenv ("serial#", buf); + } + + /* Set 'ethaddr' envvar if 'ethaddr' envvar is the default */ + eth = vpd->ethAddrs[0]; + if (ethaddr + && (strcmp (ethaddr, MK_STR (CONFIG_ETHADDR)) == 0)) { + /* Now setup ethaddr */ + sprintf (buf, "%02x:%02x:%02x:%02x:%02x:%02x", + eth[0], eth[1], eth[2], eth[3], eth[4], + eth[5]); + setenv ("ethaddr", buf); + } } - } -} /* w7o_env_init() */ +} /* w7o_env_init() */ int misc_init_r (void) { - VPD vpd; /* VPD information */ + VPD vpd; /* VPD information */ #if defined(CONFIG_W7OLMG) - unsigned long greg; /* GPIO Register */ + unsigned long greg; /* GPIO Register */ - greg = in32(IBM405GP_GPIO0_OR); + greg = in32 (IBM405GP_GPIO0_OR); - /* - * XXX - Unreset devices - this should be moved into VxWorks driver code - */ - greg |= 0x41800000L; /* SAM, PHY, Galileo */ + /* + * XXX - Unreset devices - this should be moved into VxWorks driver code + */ + greg |= 0x41800000L; /* SAM, PHY, Galileo */ - out32(IBM405GP_GPIO0_OR, greg); /* set output pins to default */ + out32 (IBM405GP_GPIO0_OR, greg); /* set output pins to default */ #endif /* CONFIG_W7OLMG */ - /* - * Initialize W7O environment variables - */ - w7o_env_init(&vpd); + /* + * Initialize W7O environment variables + */ + w7o_env_init (&vpd); - /* - * Initialize the FPGA(s). - */ - if (init_fpga() == 0) - test_fpga((unsigned short *)CONFIG_FPGAS_BASE); + /* + * Initialize the FPGA(s). + */ + if (init_fpga () == 0) + test_fpga ((unsigned short *) CONFIG_FPGAS_BASE); - /* More POST testing. */ - post2(); + /* More POST testing. */ + post2 (); - /* Done with hardware initialization and POST. */ - log_stat(ERR_POSTOK); + /* Done with hardware initialization and POST. */ + log_stat (ERR_POSTOK); - /* Call silly, fail safe boot init routine */ - init_fsboot(); + /* Call silly, fail safe boot init routine */ + init_fsboot (); return (0); } diff --git a/common/Makefile b/common/Makefile index 5595c23004..eaf2cac451 100644 --- a/common/Makefile +++ b/common/Makefile @@ -47,7 +47,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o \ hush.o kgdb.o lists.o lynxkdi.o miiphybb.o miiphyutil.o \ s_record.o soft_i2c.o soft_spi.o spartan2.o \ usb.o usb_kbd.o usb_storage.o \ - virtex2.o xilinx.o + virtex2.o xilinx.o memsize.o OBJS = $(AOBJS) $(COBJS) diff --git a/common/memsize.c b/common/memsize.c new file mode 100644 index 0000000000..dbc812dfc5 --- /dev/null +++ b/common/memsize.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. + */ +long get_ram_size(volatile long *base, long maxsize) +{ + volatile long *addr; + long save[32]; + long cnt; + long val; + long size; + int i = 0; + + for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + save[i++] = *addr; + *addr = ~cnt; + } + + addr = base; + save[i] = *addr; + *addr = 0; + + if ((val = *addr) != 0) { + /* Restore the original data before leaving the function. + */ + *addr = save[i]; + for (cnt = 1; cnt < maxsize / sizeof(long); cnt <<= 1) { + addr = base + cnt; + *addr = save[--i]; + } + return (0); + } + + for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + val = *addr; + *addr = save[--i]; + if (val != ~cnt) { + size = cnt * sizeof (long); + /* Restore the original data before leaving the function. + */ + for (cnt <<= 1; cnt < maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; + *addr = save[--i]; + } + return (size); + } + } + + return (maxsize); +} diff --git a/include/common.h b/include/common.h index 32107a0942..f4656fcc8d 100644 --- a/include/common.h +++ b/include/common.h @@ -92,9 +92,9 @@ typedef volatile unsigned char vu_char; #define debugX(level,fmt,args...) #endif /* DEBUG */ -typedef void (interrupt_handler_t)(void *); +typedef void (interrupt_handler_t)(void *); -#include <asm/u-boot.h> /* boot information for Linux kernel */ +#include <asm/u-boot.h> /* boot information for Linux kernel */ #include <asm/global_data.h> /* global data used for startup functions */ /* @@ -142,11 +142,11 @@ int serial_buffered_getc (void); int serial_buffered_tstc (void); #endif /* CONFIG_SERIAL_SOFTWARE_FIFO */ -void hang (void) __attribute__ ((noreturn)); +void hang (void) __attribute__ ((noreturn)); /* */ long int initdram (int); -int display_options (void); +int display_options (void); void print_size (ulong, const char *); /* common/main.c */ @@ -175,18 +175,18 @@ int autoscript (ulong addr); /* common/cmd_bootm.c */ void print_image_hdr (image_header_t *hdr); -extern ulong load_addr; /* Default Load Address */ +extern ulong load_addr; /* Default Load Address */ /* common/cmd_nvedit.c */ int env_init (void); void env_relocate (void); -char *getenv (uchar *); +char *getenv (uchar *); int getenv_r (uchar *name, uchar *buf, unsigned len); -int saveenv (void); +int saveenv (void); #ifdef CONFIG_PPC /* ARM version to be fixed! */ void inline setenv (char *, char *); #else -void setenv (char *, char *); +void setenv (char *, char *); #endif /* CONFIG_PPC */ #ifdef CONFIG_ARM # include <asm/setup.h> @@ -196,21 +196,21 @@ void setenv (char *, char *); # include <asm/u-boot-i386.h> #endif /* CONFIG_I386 */ -void pci_init (void); -void pci_init_board(void); -void pciinfo (int, int); +void pci_init (void); +void pci_init_board(void); +void pciinfo (int, int); #if defined(CONFIG_PCI) && defined(CONFIG_440) # if defined(CFG_PCI_PRE_INIT) - int pci_pre_init (struct pci_controller * ); + int pci_pre_init (struct pci_controller * ); # endif # if defined(CFG_PCI_TARGET_INIT) - void pci_target_init (struct pci_controller *); + void pci_target_init (struct pci_controller *); # endif # if defined(CFG_PCI_MASTER_INIT) - void pci_master_init (struct pci_controller *); + void pci_master_init (struct pci_controller *); # endif - int is_pci_host (struct pci_controller *); + int is_pci_host (struct pci_controller *); #endif int misc_init_f (void); @@ -219,9 +219,12 @@ int misc_init_r (void); /* common/exports.c */ void jumptable_init(void); +/* common/memsize.c */ +int get_ram_size (volatile long *, long); + /* $(BOARD)/$(BOARD).c */ void reset_phy (void); -void fdc_hw_init (void); +void fdc_hw_init (void); /* $(BOARD)/eeprom.c */ void eeprom_init (void); @@ -248,7 +251,7 @@ extern void pic_write (uchar reg, uchar val); #if defined(CONFIG_SPI) extern void spi_init_f (void); extern void spi_init_r (void); -extern ssize_t spi_read (uchar *, int, uchar *, int); +extern ssize_t spi_read (uchar *, int, uchar *, int); extern ssize_t spi_write (uchar *, int, uchar *, int); #endif @@ -292,11 +295,11 @@ int testdram(void); #endif /* CFG_DRAM_TEST */ /* $(CPU)/start.S */ -#if defined(CONFIG_5xx) || \ +#if defined(CONFIG_5xx) || \ defined(CONFIG_8xx) uint get_immr (uint); #endif -uint get_pir (void); +uint get_pir (void); uint get_pvr (void); uint rd_ic_cst (void); void wr_ic_cst (uint); @@ -318,19 +321,19 @@ void trap_init (ulong); defined (CONFIG_74x) || \ defined (CONFIG_75x) || \ defined (CONFIG_74xx) -unsigned char in8(unsigned int); -void out8(unsigned int, unsigned char); -unsigned short in16(unsigned int); -unsigned short in16r(unsigned int); -void out16(unsigned int, unsigned short value); -void out16r(unsigned int, unsigned short value); -unsigned long in32(unsigned int); -unsigned long in32r(unsigned int); -void out32(unsigned int, unsigned long value); -void out32r(unsigned int, unsigned long value); -void ppcDcbf(unsigned long value); -void ppcDcbi(unsigned long value); -void ppcSync(void); +unsigned char in8(unsigned int); +void out8(unsigned int, unsigned char); +unsigned short in16(unsigned int); +unsigned short in16r(unsigned int); +void out16(unsigned int, unsigned short value); +void out16r(unsigned int, unsigned short value); +unsigned long in32(unsigned int); +unsigned long in32r(unsigned int); +void out32(unsigned int, unsigned long value); +void out32r(unsigned int, unsigned long value); +void ppcDcbf(unsigned long value); +void ppcDcbi(unsigned long value); +void ppcSync(void); #endif /* $(CPU)/cpu.c */ @@ -368,13 +371,13 @@ ulong get_PCLK (void); ulong get_UCLK (void); #endif #if defined CONFIG_INCA_IP -uint incaip_get_cpuclk (void); +uint incaip_get_cpuclk (void); #endif ulong get_bus_freq (ulong); #if defined(CONFIG_MPC85xx) typedef MPC85xx_SYS_INFO sys_info_t; -void get_sys_info ( sys_info_t * ); +void get_sys_info ( sys_info_t * ); #endif #if defined(CONFIG_4xx) || defined(CONFIG_IOP480) @@ -383,7 +386,7 @@ void get_sys_info ( sys_info_t * ); # else typedef PPC405_SYS_INFO sys_info_t; # endif -void get_sys_info ( sys_info_t * ); +void get_sys_info ( sys_info_t * ); #endif /* $(CPU)/cpu_init.c */ @@ -399,8 +402,8 @@ int prt_8260_rsr (void); #endif /* $(CPU)/interrupts.c */ -int interrupt_init (void); -void timer_interrupt (struct pt_regs *); +int interrupt_init (void); +void timer_interrupt (struct pt_regs *); void external_interrupt (struct pt_regs *); void irq_install_handler(int, interrupt_handler_t *, void *); void irq_free_handler (int); @@ -453,7 +456,7 @@ ulong simple_strtoul(const char *cp,char **endp,unsigned int base); long simple_strtol(const char *cp,char **endp,unsigned int base); void panic(const char *fmt, ...); int sprintf(char * buf, const char *fmt, ...); -int vsprintf(char *buf, const char *fmt, va_list args); +int vsprintf(char *buf, const char *fmt, va_list args); /* lib_generic/crc32.c */ ulong crc32 (ulong, const unsigned char *, uint); diff --git a/include/exports.h b/include/exports.h index 3c60dbdf32..0eaf66e183 100644 --- a/include/exports.h +++ b/include/exports.h @@ -1,5 +1,5 @@ -#ifndef __MON_SYS_CALL_H__ -#define __MON_SYS_CALL_H__ +#ifndef __EXPORTS_H__ +#define __EXPORTS_H__ #ifndef __ASSEMBLY__ @@ -43,4 +43,4 @@ enum { extern gd_t *global_data; #endif -#endif +#endif /* __EXPORTS_H__ */ diff --git a/include/version.h b/include/version.h index e61a03cfb2..867717d399 100644 --- a/include/version.h +++ b/include/version.h @@ -24,6 +24,6 @@ #ifndef __VERSION_H__ #define __VERSION_H__ -#define U_BOOT_VERSION "U-Boot 1.0.1" +#define U_BOOT_VERSION "U-Boot 1.0.2" #endif /* __VERSION_H__ */ |