diff options
| -rw-r--r-- | board/freescale/ls1043aqds/Makefile | 2 | ||||
| -rw-r--r-- | board/freescale/ls1043ardb/Makefile | 4 | ||||
| -rw-r--r-- | board/freescale/ls1043ardb/ls1043ardb.c | 18 | ||||
| -rw-r--r-- | configs/ls1043ardb_sdcard_defconfig | 1 | ||||
| -rw-r--r-- | include/configs/ls1043a_common.h | 37 | ||||
| -rw-r--r-- | include/configs/ls1043ardb.h | 14 |
6 files changed, 67 insertions, 9 deletions
diff --git a/board/freescale/ls1043aqds/Makefile b/board/freescale/ls1043aqds/Makefile index f727bfd622..49d8d7d9b9 100644 --- a/board/freescale/ls1043aqds/Makefile +++ b/board/freescale/ls1043aqds/Makefile @@ -5,5 +5,7 @@ # obj-y += ddr.o +ifndef CONFIG_SPL_BUILD obj-y += eth.o +endif obj-y += ls1043aqds.o diff --git a/board/freescale/ls1043ardb/Makefile b/board/freescale/ls1043ardb/Makefile index 5fe1cc9393..2a4452e5ec 100644 --- a/board/freescale/ls1043ardb/Makefile +++ b/board/freescale/ls1043ardb/Makefile @@ -4,7 +4,9 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y += cpld.o obj-y += ddr.o obj-y += ls1043ardb.o +ifndef CONFIG_SPL_BUILD obj-$(CONFIG_SYS_DPAA_FMAN) += eth.o +obj-y += cpld.o +endif diff --git a/board/freescale/ls1043ardb/ls1043ardb.c b/board/freescale/ls1043ardb/ls1043ardb.c index 728de2e3f1..9dc1cbc343 100644 --- a/board/freescale/ls1043ardb/ls1043ardb.c +++ b/board/freescale/ls1043ardb/ls1043ardb.c @@ -27,6 +27,15 @@ DECLARE_GLOBAL_DATA_PTR; +int board_early_init_f(void) +{ + fsl_lsch2_early_init_f(); + + return 0; +} + +#ifndef CONFIG_SPL_BUILD + int checkboard(void) { static const char *freq[2] = {"100.00MHZ", "156.25MHZ"}; @@ -65,13 +74,6 @@ int checkboard(void) return 0; } -int board_early_init_f(void) -{ - fsl_lsch2_early_init_f(); - - return 0; -} - int board_init(void) { struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; @@ -213,3 +215,5 @@ u16 flash_read16(void *addr) return (((val) >> 8) & 0x00ff) | (((val) << 8) & 0xff00); } + +#endif diff --git a/configs/ls1043ardb_sdcard_defconfig b/configs/ls1043ardb_sdcard_defconfig index 02b5b5434a..d34a253f11 100644 --- a/configs/ls1043ardb_sdcard_defconfig +++ b/configs/ls1043ardb_sdcard_defconfig @@ -18,7 +18,6 @@ CONFIG_SPL=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0xf0 CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_I2C_SUPPORT=y CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y CONFIG_HUSH_PARSER=y CONFIG_CMD_GPT=y diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 46d54a0f0d..23b7ef7b82 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -7,6 +7,25 @@ #ifndef __LS1043A_COMMON_H #define __LS1043A_COMMON_H +/* SPL build */ +#ifdef CONFIG_SPL_BUILD +#define SPL_NO_FMAN +#define SPL_NO_DSPI +#define SPL_NO_PCIE +#define SPL_NO_ENV +#define SPL_NO_MISC +#define SPL_NO_USB +#define SPL_NO_SATA +#define SPL_NO_QE +#define SPL_NO_EEPROM +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_BOOT)) +#define SPL_NO_MMC +#endif +#if (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SD_BOOT)) +#define SPL_NO_IFC +#endif + #define CONFIG_REMAKE_ELF #define CONFIG_FSL_LAYERSCAPE #define CONFIG_LS1043A @@ -83,6 +102,7 @@ #endif /* IFC */ +#ifndef SPL_NO_IFC #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_IFC /* @@ -103,6 +123,7 @@ #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ #endif #endif +#endif /* I2C */ #define CONFIG_SYS_I2C @@ -113,6 +134,7 @@ #define CONFIG_SYS_I2C_MXC_I2C4 /* PCIe */ +#ifndef SPL_NO_PCIE #define CONFIG_PCIE1 /* PCIE controller 1 */ #define CONFIG_PCIE2 /* PCIE controller 2 */ #define CONFIG_PCIE3 /* PCIE controller 3 */ @@ -122,17 +144,23 @@ #define CONFIG_PCI_SCAN_SHOW #define CONFIG_CMD_PCI #endif +#endif /* Command line configuration */ +#ifndef SPL_NO_ENV #define CONFIG_CMD_ENV +#endif /* MMC */ +#ifndef SPL_NO_MMC #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 #endif +#endif /* DSPI */ +#ifndef SPL_NO_DSPI #define CONFIG_FSL_DSPI #ifdef CONFIG_FSL_DSPI #define CONFIG_DM_SPI_FLASH @@ -144,8 +172,10 @@ #define CONFIG_SF_DEFAULT_CS 0 #endif #endif +#endif /* FMan ucode */ +#ifndef SPL_NO_FMAN #define CONFIG_SYS_DPAA_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 @@ -177,6 +207,7 @@ #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) #endif +#endif /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) @@ -184,6 +215,7 @@ #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 +#ifndef SPL_NO_MISC #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \ "5m(kernel),1m(dtb),9m(file_system)" @@ -224,6 +256,7 @@ #define CONFIG_BOOTCOMMAND "cp.b $kernel_start $kernel_load " \ "$kernel_size && bootm $kernel_load" #endif +#endif /* Monitor Command Prompt */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ @@ -231,7 +264,11 @@ sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */ #define CONFIG_SYS_LONGHELP + +#ifndef SPL_NO_MISC #define CONFIG_CMDLINE_EDITING 1 +#endif + #define CONFIG_AUTO_COMPLETE #define CONFIG_SYS_MAXARGS 64 /* max command args */ diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index f185380ae3..ea929d1da0 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -90,7 +90,9 @@ /* * NAND Flash Definitions */ +#ifndef SPL_NO_IFC #define CONFIG_NAND_FSL_IFC +#endif #define CONFIG_SYS_NAND_BASE 0x7e800000 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE @@ -213,6 +215,7 @@ #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CPLD_FTIM3 /* EEPROM */ +#ifndef SPL_NO_EEPROM #define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 @@ -220,11 +223,14 @@ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#endif /* * Environment */ +#ifndef SPL_NO_ENV #define CONFIG_ENV_OVERWRITE +#endif #if defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND @@ -243,6 +249,7 @@ #endif /* FMan */ +#ifndef SPL_NO_FMAN #ifdef CONFIG_SYS_DPAA_FMAN #define CONFIG_FMAN_ENET #define CONFIG_PHYLIB @@ -266,23 +273,29 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif +#endif /* QE */ +#ifndef SPL_NO_QE #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_NAND_BOOT) && \ !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif #define CONFIG_SYS_QE_FW_ADDR 0x60600000 +#endif /* USB */ +#ifndef SPL_NO_USB #define CONFIG_HAS_FSL_XHCI_USB #ifdef CONFIG_HAS_FSL_XHCI_USB #define CONFIG_USB_XHCI_FSL #define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 #endif +#endif /* SATA */ +#ifndef SPL_NO_SATA #define CONFIG_LIBATA #define CONFIG_SCSI_AHCI #define CONFIG_CMD_SCSI @@ -299,6 +312,7 @@ #define SCSI_VEND_ID 0x1b4b #define SCSI_DEV_ID 0x9170 #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} +#endif #include <asm/fsl_secure_boot.h> |