diff options
Diffstat (limited to 'Makefile')
| -rw-r--r-- | Makefile | 52 |
1 files changed, 26 insertions, 26 deletions
@@ -1701,7 +1701,7 @@ ISPAN_config \ ISPAN_REVB_config: unconfig @mkdir -p $(obj)include @if [ "$(findstring _REVB_,$@)" ] ; then \ - echo "#define CFG_REV_B" > $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ fi @$(MKCONFIG) -a ISPAN ppc mpc8260 ispan @@ -1728,8 +1728,8 @@ PQ2FADS-ZU_66MHz_lowboot_config \ @mkdir -p $(obj)include @mkdir -p $(obj)board/freescale/mpc8260ads $(if $(findstring PQ2FADS,$@), \ - @echo "#define CONFIG_ADSTYPE CFG_PQ2FADS" > $(obj)include/config.h, \ - @echo "#define CONFIG_ADSTYPE CFG_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) + @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ + @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) $(if $(findstring MHz,$@), \ @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ $(if $(findstring VR,$@), \ @@ -1981,19 +1981,19 @@ M54451EVB_stmicro_config : unconfig M54451EVB_stmicro_config) FLASH=STMICRO;; \ esac; \ if [ "$${FLASH}" = "SPANSION" ] ; then \ - echo "#define CFG_SPANSION_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ $(XECHO) "... with SPANSION boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ - echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ $(XECHO) "... with ST Micro boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; + echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; @$(MKCONFIG) -a M54451EVB m68k mcf5445x m54451evb freescale M54455EVB_config \ @@ -2015,25 +2015,25 @@ M54455EVB_stm33_config : unconfig M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ esac; \ if [ "$${FLASH}" = "INTEL" ] ; then \ - echo "#define CFG_INTEL_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with INTEL boot..." ; \ fi; \ if [ "$${FLASH}" = "ATMEL" ] ; then \ - echo "#define CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with ATMEL boot..." ; \ fi; \ if [ "$${FLASH}" = "STMICRO" ] ; then \ echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ - echo "#define CFG_STMICRO_BOOT" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ $(XECHO) "... with ST Micro boot..." ; \ fi; \ - echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ $(XECHO) "... with $${FREQ}Hz input clock" @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale @@ -2053,20 +2053,20 @@ M5475GFE_config : unconfig M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ esac; \ - echo "#define CFG_BUSCLK 133333333" > $(obj)include/config.h ; \ - echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ - echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ if [ "$${RAM1}" != "0" ] ; then \ - echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ fi; \ if [ "$${CODE}" != "0" ] ; then \ - echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ fi; \ if [ "$${VID}" == "1" ] ; then \ - echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ fi; \ if [ "$${USB}" == "1" ] ; then \ - echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5475EVB m68k mcf547x_8x m547xevb freescale @@ -2088,20 +2088,20 @@ M5485HFE_config : unconfig M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ esac; \ - echo "#define CFG_BUSCLK 100000000" > $(obj)include/config.h ; \ - echo "#define CFG_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ - echo "#define CFG_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ if [ "$${RAM1}" != "0" ] ; then \ - echo "#define CFG_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ fi; \ if [ "$${CODE}" != "0" ] ; then \ - echo "#define CFG_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ fi; \ if [ "$${VID}" == "1" ] ; then \ - echo "#define CFG_VIDEO" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ fi; \ if [ "$${USB}" == "1" ] ; then \ - echo "#define CFG_USBCTRL" >> $(obj)include/config.h ; \ + echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ fi @$(MKCONFIG) -a M5485EVB m68k mcf547x_8x m548xevb freescale @@ -2120,11 +2120,11 @@ MPC8313ERDB_NAND_66_config: unconfig @mkdir -p $(obj)board/freescale/mpc8313erdb @if [ "$(findstring _33_,$@)" ] ; then \ $(XECHO) -n "...33M ..." ; \ - echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _66_,$@)" ] ; then \ $(XECHO) -n "...66M..." ; \ - echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \ + echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ fi ; \ if [ "$(findstring _NAND_,$@)" ] ; then \ $(XECHO) -n "...NAND..." ; \ |