1 files changed, 189 insertions, 0 deletions
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
new file mode 100644
index 0000000000..9561a58562
--- /dev/null
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28.dts
@@ -0,0 +1,189 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Device Tree file for the Kontron SMARC-sAL28 board.
+ *
+ * Copyright (C) 2019 Michael Walle <michael@walle.cc>
+ *
+ */
+
+/dts-v1/;
+#include "fsl-ls1028a.dtsi"
+
+/ {
+	model = "Kontron SMARC-sAL28";
+	compatible = "kontron,sl28", "fsl,ls1028a";
+
+	aliases {
+		serial0 = &serial0;
+		serial1 = &serial1;
+		serial2 = &lpuart1;
+		spi0 = &fspi;
+		spi1 = &dspi2;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&dspi2 {
+	status = "okay";
+};
+
+&enetc0 {
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	status = "okay";
+};
+
+&enetc2 {
+	status = "disabled";
+};
+
+&enetc6 {
+	status = "disabled";
+};
+
+&esdhc0 {
+	sd-uhs-sdr104;
+	sd-uhs-sdr50;
+	sd-uhs-sdr25;
+	sd-uhs-sdr12;
+	status = "okay";
+};
+
+&esdhc1 {
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&fspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		m25p,fast-read;
+		spi-max-frequency = <133000000>;
+		reg = <0>;
+		/* The following setting enables 1-1-2 (CMD-ADDR-DATA) mode */
+		spi-rx-bus-width = <2>; /* 2 SPI Rx lines */
+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
+
+		partition@0 {
+			reg = <0x000000 0x010000>;
+			label = "rcw";
+			read-only;
+		};
+
+		partition@10000 {
+			reg = <0x010000 0x0f0000>;
+			label = "failsafe bootloader";
+			read-only;
+		};
+
+		partition@100000 {
+			reg = <0x100000 0x040000>;
+			label = "failsafe DP firmware";
+			read-only;
+		};
+
+		partition@140000 {
+			reg = <0x140000 0x0a0000>;
+			label = "failsafe trusted firmware";
+			read-only;
+		};
+
+		partition@1e0000 {
+			reg = <0x1e0000 0x020000>;
+			label = "reserved";
+			read-only;
+		};
+
+		partition@200000 {
+			reg = <0x200000 0x010000>;
+			label = "configuration store";
+		};
+
+		partition@210000 {
+			reg = <0x210000 0x0f0000>;
+			label = "bootloader";
+		};
+
+		partition@300000 {
+			reg = <0x300000 0x040000>;
+			label = "DP firmware";
+		};
+
+		partition@340000 {
+			reg = <0x340000 0x0a0000>;
+			label = "trusted firmware";
+		};
+
+		partition@3e0000 {
+			reg = <0x3e0000 0x020000>;
+			label = "bootloader environment";
+		};
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "microcrystal,rv8803";
+		reg = <0x32>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <32>;
+	};
+};
+
+&lpuart1 {
+	status = "okay";
+};
+
+&mdio0 {
+	status = "okay";
+	phy0: ethernet-phy@5 {
+		reg = <0x5>;
+		eee-broken-1000t;
+		eee-broken-100tx;
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+&serial1 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};
+
+&usb2 {
+	status = "okay";
+};