summaryrefslogtreecommitdiff
path: root/arch/arm/dts/rk3399-rockpro64.dtsi
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/dts/rk3399-rockpro64.dtsi')
-rw-r--r--arch/arm/dts/rk3399-rockpro64.dtsi95
1 files changed, 84 insertions, 11 deletions
diff --git a/arch/arm/dts/rk3399-rockpro64.dtsi b/arch/arm/dts/rk3399-rockpro64.dtsi
index 9bca258012..6bff8db7d3 100644
--- a/arch/arm/dts/rk3399-rockpro64.dtsi
+++ b/arch/arm/dts/rk3399-rockpro64.dtsi
@@ -10,6 +10,12 @@
#include "rk3399-opp.dtsi"
/ {
+ aliases {
+ mmc0 = &sdio0;
+ mmc1 = &sdmmc;
+ mmc2 = &sdhci;
+ };
+
chosen {
stdout-path = "serial2:1500000n8";
};
@@ -36,18 +42,25 @@
};
};
+ ir-receiver {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&ir_int>;
+ pinctrl-names = "default";
+ };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
- pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
+ pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
- work-led {
+ work_led: led-0 {
label = "work";
default-state = "on";
gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
};
- diy-led {
+ diy_led: led-1 {
label = "diy";
default-state = "off";
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
@@ -72,10 +85,27 @@
sound {
compatible = "audio-graph-card";
- label = "rockchip,rk3399";
+ label = "Analog";
dais = <&i2s1_p0>;
};
+ sound-dit {
+ compatible = "audio-graph-card";
+ label = "SPDIF";
+ dais = <&spdif_p0>;
+ };
+
+ spdif-dit {
+ compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+
+ port {
+ dit_p0_0: endpoint {
+ remote-endpoint = <&spdif_p0_0>;
+ };
+ };
+ };
+
vcc12v_dcin: vcc12v-dcin {
compatible = "regulator-fixed";
regulator-name = "vcc12v_dcin";
@@ -96,6 +126,24 @@
vin-supply = <&vcc_1v8>;
};
+ /* micro SD card power */
+ vcc3v0_sd: vcc3v0-sd {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc0_pwr_h>;
+ regulator-name = "vcc3v0_sd";
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ vin-supply = <&vcc3v3_sys>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
vcc3v3_pcie: vcc3v3-pcie-regulator {
compatible = "regulator-fixed";
enable-active-high;
@@ -427,7 +475,7 @@
reg = <0x40>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel1_gpio>;
+ pinctrl-0 = <&vsel1_pin>;
regulator-name = "vdd_cpu_b";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -446,7 +494,7 @@
reg = <0x41>;
fcs,suspend-voltage-selector = <1>;
pinctrl-names = "default";
- pinctrl-0 = <&vsel2_gpio>;
+ pinctrl-0 = <&vsel2_pin>;
regulator-name = "vdd_gpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1500000>;
@@ -569,12 +617,18 @@
};
};
+ ir {
+ ir_int: ir-int {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
leds {
- work_led_gpio: work_led-gpio {
+ work_led_pin: work-led-pin {
rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
- diy_led_gpio: diy_led-gpio {
+ diy_led_pin: diy-led-pin {
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
@@ -594,15 +648,22 @@
rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
};
- vsel1_gpio: vsel1-gpio {
+ vsel1_pin: vsel1-pin {
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
};
- vsel2_gpio: vsel2-gpio {
+ vsel2_pin: vsel2-pin {
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
+ sdcard {
+ sdmmc0_pwr_h: sdmmc0-pwr-h {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ };
+
sdio-pwrseq {
wifi_enable_h: wifi-enable-h {
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -661,6 +722,8 @@
max-frequency = <150000000>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+ vmmc-supply = <&vcc3v0_sd>;
+ vqmmc-supply = <&vcc_sdio>;
status = "okay";
};
@@ -671,6 +734,16 @@
status = "okay";
};
+&spdif {
+ pinctrl-0 = <&spdif_bus_1>;
+
+ spdif_p0: port {
+ spdif_p0_0: endpoint {
+ remote-endpoint = <&dit_p0_0>;
+ };
+ };
+};
+
&spi1 {
status = "okay";
@@ -768,7 +841,7 @@
&usbdrd_dwc3_0 {
status = "okay";
- dr_mode = "otg";
+ dr_mode = "host";
};
&usbdrd3_1 {