1 files changed, 1 insertions, 108 deletions
diff --git a/arch/arm/dts/zynq-zturn.dts b/arch/arm/dts/zynq-zturn.dts
index 600e8ee025..620b24a25e 100644
--- a/arch/arm/dts/zynq-zturn.dts
+++ b/arch/arm/dts/zynq-zturn.dts
@@ -1,122 +1,15 @@
 // SPDX-License-Identifier: GPL-2.0
-/*
- *  Copyright (C) 2015 Andrea Merello <adnrea.merello@gmail.com>
- *  Copyright (C) 2017 Alexander Graf <agraf@suse.de>
- *
- *  Based on zynq-zed.dts which is:
- *  Copyright (C) 2011 - 2014 Xilinx
- *  Copyright (C) 2012 National Instruments Corp.
- *
- */
 
 /dts-v1/;
-/include/ "zynq-7000.dtsi"
+/include/ "zynq-zturn-common.dtsi"
 
 / {
 	model = "Zynq Z-Turn MYIR Board";
 	compatible = "myir,zynq-zturn", "xlnx,zynq-7000";
-
-	aliases {
-		ethernet0 = &gem0;
-		serial0 = &uart1;
-		serial1 = &uart0;
-		mmc0 = &sdhci0;
-	};
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x0 0x40000000>;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		usr-led1 {
-			label = "usr-led1";
-			gpios = <&gpio0 0x0 0x1>;
-			default-state = "off";
-		};
-
-		usr-led2 {
-			label = "usr-led2";
-			gpios = <&gpio0 0x9 0x1>;
-			default-state = "off";
-		};
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		autorepeat;
-		K1 {
-			label = "K1";
-			gpios = <&gpio0 0x32 0x1>;
-			linux,code = <0x66>;
-			wakeup-source;
-			autorepeat;
-		};
-	};
-};
-
-&clkc {
-	ps-clk-frequency = <33333333>;
-};
-
-&qspi {
-	u-boot,dm-pre-reloc;
-	status = "okay";
 };
 
 &gem0 {
-	status = "okay";
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethernet_phy>;
-
 	ethernet_phy: ethernet-phy@0 {
 		reg = <0x0>;
 	};
 };
-
-&sdhci0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&uart0 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&uart1 {
-	u-boot,dm-pre-reloc;
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&can0 {
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	stlm75@49 {
-		status = "okay";
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-
-	accelerometer@53 {
-		compatible = "adi,adxl345", "adxl345", "adi,adxl34x", "adxl34x";
-		reg = <0x53>;
-		interrupt-parent = <&intc>;
-		interrupts = <0x0 0x1e 0x4>;
-	};
-};