diff options
Diffstat (limited to 'arch/arm/mach-imx/iomux-v3.c')
| -rw-r--r-- | arch/arm/mach-imx/iomux-v3.c | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/arch/arm/mach-imx/iomux-v3.c b/arch/arm/mach-imx/iomux-v3.c new file mode 100644 index 0000000000..94d660015d --- /dev/null +++ b/arch/arm/mach-imx/iomux-v3.c @@ -0,0 +1,149 @@ +/* + * Based on the iomux-v3.c from Linux kernel: + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH, + * <armlinux@phytec.de> + * + * Copyright (C) 2004-2011 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/io.h> +#include <asm/arch/imx-regs.h> +#include <asm/mach-imx/iomux-v3.h> +#include <asm/mach-imx/sys_proto.h> + +static void *base = (void *)IOMUXC_BASE_ADDR; + +/* + * configures a single pad in the iomuxer + */ +void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad) +{ + u32 mux_ctrl_ofs = (pad & MUX_CTRL_OFS_MASK) >> MUX_CTRL_OFS_SHIFT; + u32 mux_mode = (pad & MUX_MODE_MASK) >> MUX_MODE_SHIFT; + u32 sel_input_ofs = + (pad & MUX_SEL_INPUT_OFS_MASK) >> MUX_SEL_INPUT_OFS_SHIFT; + u32 sel_input = + (pad & MUX_SEL_INPUT_MASK) >> MUX_SEL_INPUT_SHIFT; + u32 pad_ctrl_ofs = + (pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT; + u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT; + +#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) + /* Check whether LVE bit needs to be set */ + if (pad_ctrl & PAD_CTL_LVE) { + pad_ctrl &= ~PAD_CTL_LVE; + pad_ctrl |= PAD_CTL_LVE_BIT; + } +#endif + +#ifdef CONFIG_IOMUX_LPSR + u32 lpsr = (pad & MUX_MODE_LPSR) >> MUX_MODE_SHIFT; + +#ifdef CONFIG_MX7 + if (lpsr == IOMUX_CONFIG_LPSR) { + base = (void *)IOMUXC_LPSR_BASE_ADDR; + mux_mode &= ~IOMUX_CONFIG_LPSR; + /* set daisy chain sel_input */ + if (sel_input_ofs) + sel_input_ofs += IOMUX_LPSR_SEL_INPUT_OFS; + } +#else + if (is_mx6ull() || is_mx6sll()) { + if (lpsr == IOMUX_CONFIG_LPSR) { + base = (void *)IOMUXC_SNVS_BASE_ADDR; + mux_mode &= ~IOMUX_CONFIG_LPSR; + } + } +#endif +#endif + + if (is_mx7() || is_mx6ull() || is_mx6sll() || mux_ctrl_ofs) + __raw_writel(mux_mode, base + mux_ctrl_ofs); + + if (sel_input_ofs) + __raw_writel(sel_input, base + sel_input_ofs); + +#ifdef CONFIG_IOMUX_SHARE_CONF_REG + if (!(pad_ctrl & NO_PAD_CTRL)) + __raw_writel((mux_mode << PAD_MUX_MODE_SHIFT) | pad_ctrl, + base + pad_ctrl_ofs); +#else + if (!(pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) + __raw_writel(pad_ctrl, base + pad_ctrl_ofs); +#if defined(CONFIG_MX6SLL) + else if ((pad_ctrl & NO_PAD_CTRL) && pad_ctrl_ofs) + clrbits_le32(base + pad_ctrl_ofs, PAD_CTL_IPD_BIT); +#endif +#endif + +#ifdef CONFIG_IOMUX_LPSR + if (lpsr == IOMUX_CONFIG_LPSR) + base = (void *)IOMUXC_BASE_ADDR; +#endif + +} + +/* configures a list of pads within declared with IOMUX_PADS macro */ +void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list, + unsigned count) +{ + iomux_v3_cfg_t const *p = pad_list; + int stride; + int i; + +#if defined(CONFIG_MX6QDL) + stride = 2; + if (!is_mx6dq() && !is_mx6dqp()) + p += 1; +#else + stride = 1; +#endif + for (i = 0; i < count; i++) { + imx_iomux_v3_setup_pad(*p); + p += stride; + } +} + +void imx_iomux_set_gpr_register(int group, int start_bit, + int num_bits, int value) +{ + int i = 0; + u32 reg; + reg = readl(base + group * 4); + while (num_bits) { + reg &= ~(1<<(start_bit + i)); + i++; + num_bits--; + } + reg |= (value << start_bit); + writel(reg, base + group * 4); +} + +#ifdef CONFIG_IOMUX_SHARE_CONF_REG +void imx_iomux_gpio_set_direction(unsigned int gpio, + unsigned int direction) +{ + u32 reg; + /* + * Only on Vybrid the input/output buffer enable flags + * are part of the shared mux/conf register. + */ + reg = readl(base + (gpio << 2)); + + if (direction) + reg |= 0x2; + else + reg &= ~0x2; + + writel(reg, base + (gpio << 2)); +} + +void imx_iomux_gpio_get_function(unsigned int gpio, u32 *gpio_state) +{ + *gpio_state = readl(base + (gpio << 2)) & + ((0X07 << PAD_MUX_MODE_SHIFT) | PAD_CTL_OBE_IBE_ENABLE); +} +#endif |