diff options
Diffstat (limited to 'arch/powerpc/cpu/mpc85xx')
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/Makefile | 38 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/cmd_errata.c | 114 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/cpu.c | 17 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/cpu_init.c | 14 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/ddr-gen1.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/ddr-gen2.c | 9 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/ddr-gen3.c | 14 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 20 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/mp.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/release.S | 36 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/spl_minimal.c (renamed from arch/powerpc/cpu/mpc85xx/cpu_init_nand.c) | 19 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/start.S | 123 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/tlb.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/u-boot-spl.lds | 87 |
14 files changed, 394 insertions, 109 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 78c412d9f3..4c2b1040d4 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -28,7 +28,22 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).o -START = start.o resetvec.o +MINIMAL= + +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_INIT_MINIMAL +MINIMAL=y +endif +endif + +START = start.o resetvec.o + +ifdef MINIMAL + +COBJS-y += cpu_init_early.o tlb.o spl_minimal.o + +else + SOBJS-$(CONFIG_MP) += release.o SOBJS = $(SOBJS-y) @@ -121,17 +136,20 @@ COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o -COBJS = $(COBJS-y) -COBJS += cpu.o -COBJS += cpu_init.o -COBJS += cpu_init_early.o -COBJS += interrupts.o -COBJS += speed.o -COBJS += tlb.o -COBJS += traps.o +COBJS-y += cpu.o +COBJS-y += cpu_init.o +COBJS-y += cpu_init_early.o +COBJS-y += interrupts.o +COBJS-y += speed.o +COBJS-y += tlb.o +COBJS-y += traps.o # Stub implementations of cache management functions for USB -COBJS += cache.o +COBJS-y += cache.o + +endif # not minimal + +COBJS = $(COBJS-y) SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 2be192d578..e5ecf5dae5 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -24,6 +24,109 @@ #include <command.h> #include <linux/compiler.h> #include <asm/processor.h> +#include "fsl_corenet_serdes.h" + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004849 +/* + * This work-around is implemented in PBI, so just check to see if the + * work-around was actually applied. To do this, we check for specific data + * at specific addresses in DCSR. + * + * Array offsets[] contains a list of offsets within DCSR. According to the + * erratum document, the value at each offset should be 2. + */ +static void check_erratum_a4849(uint32_t svr) +{ + void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000; + unsigned int i; + +#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041) + static const uint8_t offsets[] = { + 0x50, 0x54, 0x58, 0x90, 0x94, 0x98 + }; +#endif +#ifdef CONFIG_PPC_P4080 + static const uint8_t offsets[] = { + 0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac + }; +#endif + uint32_t x108; /* The value that should be at offset 0x108 */ + + for (i = 0; i < ARRAY_SIZE(offsets); i++) { + if (in_be32(dcsr + offsets[i]) != 2) { + printf("Work-around for Erratum A004849 is not enabled\n"); + return; + } + } + +#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041) + x108 = 0x12; +#endif + +#ifdef CONFIG_PPC_P4080 + /* + * For P4080, the erratum document says that the value at offset 0x108 + * should be 0x12 on rev2, or 0x1c on rev3. + */ + if (SVR_MAJ(svr) == 2) + x108 = 0x12; + if (SVR_MAJ(svr) == 3) + x108 = 0x1c; +#endif + + if (in_be32(dcsr + 0x108) != x108) { + printf("Work-around for Erratum A004849 is not enabled\n"); + return; + } + + /* Everything matches, so the erratum work-around was applied */ + + printf("Work-around for Erratum A004849 enabled\n"); +} +#endif + +#ifdef CONFIG_SYS_FSL_ERRATUM_A004580 +/* + * This work-around is implemented in PBI, so just check to see if the + * work-around was actually applied. To do this, we check for specific data + * at specific addresses in the SerDes register block. + * + * The work-around says that for each SerDes lane, write BnTTLCRy0 = + * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000. + + */ +static void check_erratum_a4580(uint32_t svr) +{ + const serdes_corenet_t __iomem *srds_regs = + (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; + unsigned int lane; + + for (lane = 0; lane < SRDS_MAX_LANES; lane++) { + if (serdes_lane_enabled(lane)) { + const struct serdes_lane __iomem *srds_lane = + &srds_regs->lane[serdes_get_lane_idx(lane)]; + + /* + * Verify that the values we were supposed to write in + * the PBI are actually there. Also, the lower 15 + * bits of res4[3] should be the same as the upper 15 + * bits of res4[1]. + */ + if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) || + (in_be32(&srds_lane->res4[1]) != 0x880000) || + (in_be32(&srds_lane->res4[3]) != 0x40000044)) { + printf("Work-around for Erratum A004580 is " + "not enabled\n"); + return; + } + } + } + + /* Everything matches, so the erratum work-around was applied */ + + printf("Work-around for Erratum A004580 enabled\n"); +} +#endif static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { @@ -137,6 +240,17 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934 puts("Work-around for Erratum A004934 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004849 + /* This work-around is implemented in PBI, so just check for it */ + check_erratum_a4849(svr); +#endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A004580 + /* This work-around is implemented in PBI, so just check for it */ + check_erratum_a4580(svr); +#endif +#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003 + puts("Work-around for Erratum PCIe-A003 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index db232e64f8..9b9832cfc3 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -332,7 +332,8 @@ void mpc85xx_reginfo(void) /* Common ddr init for non-corenet fsl 85xx platforms */ #ifndef CONFIG_FSL_CORENET -#if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SYS_INIT_L2_ADDR) +#if (defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)) && \ + !defined(CONFIG_SYS_INIT_L2_ADDR) phys_size_t initdram(int board_type) { #if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD) @@ -450,21 +451,21 @@ static void dump_spd_ddr_reg(void) for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) { switch (i) { case 0: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR; + ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; break; #endif default: diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index f01804bbb9..d1155e8126 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -350,6 +350,10 @@ int cpu_init_r(void) #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2; #endif +#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) + extern int spin_table_compat; + const char *spin; +#endif #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011) @@ -395,6 +399,14 @@ int cpu_init_r(void) } #endif +#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP) + spin = getenv("spin_table_compat"); + if (spin && (*spin == 'n')) + spin_table_compat = 0; + else + spin_table_compat = 1; +#endif + puts ("L2: "); #if defined(CONFIG_L2_CACHE) @@ -470,7 +482,7 @@ int cpu_init_r(void) && l2srbar >= CONFIG_SYS_FLASH_BASE) { l2srbar = CONFIG_SYS_INIT_L2_ADDR; l2cache->l2srbar0 = l2srbar; - printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR); + printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR); } #endif /* CONFIG_SYS_INIT_L2_ADDR */ puts("\n"); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c index 54437dd0cb..8a86819fb5 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c @@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { unsigned int i; - volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; + volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; if (ctrl_num != 0) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); @@ -73,7 +73,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, void ddr_enable_ecc(unsigned int dram_size) { - volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); + volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR); dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c index 49000a19e8..a705862522 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c @@ -19,15 +19,12 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, unsigned int ctrl_num) { unsigned int i; -#ifdef CONFIG_MPC83xx - ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR; -#else - ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; -#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120 + ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; + +#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx) ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); uint svr; #endif -#endif if (ctrl_num) { printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num); diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c index f118dd5daf..ef0dd1da64 100644 --- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c +++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c @@ -32,21 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, switch (ctrl_num) { case 0: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR; break; -#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) +#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1) case 1: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) +#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2) case 2: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR; break; #endif -#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) +#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3) case 3: - ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR; + ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR; break; #endif default: diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c index 7f466ac6a9..5495dc59ee 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c @@ -714,9 +714,13 @@ void fsl_serdes_init(void) #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9 /* - * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for - * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or - * AURORA before the device is initialized. + * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1 + * for each of the SerDes lanes selected as SGMII, XAUI, SRIO, + * or AURORA before the device is initialized. + * + * Note that this part of the SERDES-9 work-around is + * redundant if the work-around for A-4580 has already been + * applied via PBI. */ switch (lane_prtcl) { case SGMII_FM1_DTSEC1: @@ -733,10 +737,12 @@ void fsl_serdes_init(void) case SRIO1: case SRIO2: case AURORA: - clrsetbits_be32(&srds_regs->lane[idx].ttlcr0, - SRDS_TTLCR0_FLT_SEL_MASK, - SRDS_TTLCR0_FLT_SEL_750PPM | - SRDS_TTLCR0_PM_DIS); + out_be32(&srds_regs->lane[idx].ttlcr0, + SRDS_TTLCR0_FLT_SEL_KFR_26 | + SRDS_TTLCR0_FLT_SEL_KPH_28 | + SRDS_TTLCR0_FLT_SEL_750PPM | + SRDS_TTLCR0_FREQOVD_EN); + break; default: break; } diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index e1197ac9e5..43d4836303 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -46,10 +46,8 @@ u32 get_my_id() */ int hold_cores_in_reset(int verbose) { - const char *s = getenv("mp_holdoff"); - /* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */ - if (s && (*s == 'y' || *s == 'Y' || *s == '1')) { + if (getenv_yesno("mp_holdoff") == 1) { if (verbose) { puts("Secondary cores are being held in reset.\n"); puts("See 'mp_holdoff' environment variable\n"); diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S index 4ba44a9028..5c4b1e3b75 100644 --- a/arch/powerpc/cpu/mpc85xx/release.S +++ b/arch/powerpc/cpu/mpc85xx/release.S @@ -351,7 +351,13 @@ __secondary_reset_vector: .align L1_CACHE_SHIFT .global __second_half_boot_page __second_half_boot_page: -#define EPAPR_MAGIC 0x45504150 +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + lis r3,(spin_table_compat - __second_half_boot_page)@h + ori r3,r3,(spin_table_compat - __second_half_boot_page)@l + add r3,r3,r11 /* r11 has the address of __second_half_boot_page */ + lwz r14,0(r3) +#endif + #define ENTRY_ADDR_UPPER 0 #define ENTRY_ADDR_LOWER 4 #define ENTRY_R3_UPPER 8 @@ -383,7 +389,24 @@ __second_half_boot_page: stw r8,ENTRY_ADDR_LOWER(r10) /* spin waiting for addr */ -3: lwz r4,ENTRY_ADDR_LOWER(r10) +3: +/* + * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled + * memory. Old OS may not work with this change. A patch is waiting to be + * accepted for Linux kernel. Other OS needs similar fix to spin table. + * For OSes with old spin table code, we can enable this temporary fix by + * setting environmental variable "spin_table_compat". For new OSes, set + * "spin_table_compat=no". After Linux is fixed, we can remove this macro + * and related code. For now, it is enabled by default. + */ +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + cmpwi r14,0 + beq 4f + dcbf 0, r10 + sync +4: +#endif + lwz r4,ENTRY_ADDR_LOWER(r10) andi. r11,r4,1 bne 3b isync @@ -460,5 +483,14 @@ __second_half_boot_page: .globl __spin_table __spin_table: .space CONFIG_MAX_CPUS*ENTRY_SIZE + +#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE + .align L1_CACHE_SHIFT + .global spin_table_compat +spin_table_compat: + .long 1 + +#endif + __spin_table_end: .space 4096 - (__spin_table_end - __spin_table) diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index bf7a6f6be6..c6b9cd0acc 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_nand.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -21,12 +21,16 @@ */ #include <common.h> +#include <asm/processor.h> +#include <asm/global_data.h> #include <asm/fsl_ifc.h> #include <asm/io.h> +DECLARE_GLOBAL_DATA_PTR; + void cpu_init_f(void) { -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) +#ifdef CONFIG_SYS_INIT_L2_ADDR ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR); @@ -40,3 +44,16 @@ void cpu_init_f(void) (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); #endif } + +#ifndef CONFIG_SYS_FSL_TBCLK_DIV +#define CONFIG_SYS_FSL_TBCLK_DIV 8 +#endif + +void udelay(unsigned long usec) +{ + u32 ticks_per_usec = gd->bus_clk / (CONFIG_SYS_FSL_TBCLK_DIV * 1000000); + u32 ticks = ticks_per_usec * usec; + u32 s = mfspr(SPRN_TBRL); + + while ((mfspr(SPRN_TBRL) - s) < ticks); +} diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index ac17f9d3ca..bb0dc1a653 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -44,6 +44,15 @@ #undef MSR_KERNEL #define MSR_KERNEL ( MSR_ME ) /* Machine Check */ +#if defined(CONFIG_NAND_SPL) || \ + (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)) +#define MINIMAL_SPL +#endif + +#if !defined(CONFIG_SPL) && !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#define NOR_BOOT +#endif + /* * Set up GOT: Global Offset Table * @@ -53,7 +62,7 @@ GOT_ENTRY(_GOT2_TABLE_) GOT_ENTRY(_FIXUP_TABLE_) -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL GOT_ENTRY(_start) GOT_ENTRY(_start_of_vectors) GOT_ENTRY(_end_of_vectors) @@ -282,51 +291,8 @@ l2_disabled: isync .endm -#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) -/* - * TLB entry for debuggging in AS1 - * Create temporary TLB entry in AS0 to handle debug exception - * As on debug exception MSR is cleared i.e. Address space is changed - * to 0. A TLB entry (in AS0) is required to handle debug exception generated - * in AS1. - */ - -#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) -/* - * TLB entry is created for IVPR + IVOR15 to map on valid OP code address - * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. - * and this window is outside of 4K boot window. - */ - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_4M, \ - CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ - 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 - -#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 -#else -/* - * TLB entry is created for IVPR + IVOR15 to map on valid OP code address - * because "nexti" will resize TLB to 4K - */ - create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ - 0, BOOKE_PAGESZ_256K, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I, \ - CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ - 0, r6 -#endif -#endif - -/* - * Ne need to setup interrupt vector for NAND SPL - * because NAND SPL never compiles it. - */ -#if !defined(CONFIG_NAND_SPL) +/* Interrupt vectors do not fit in minimal SPL. */ +#if !defined(MINIMAL_SPL) /* Setup interrupt vectors */ lis r1,CONFIG_SYS_MONITOR_BASE@h mtspr IVPR,r1 @@ -534,10 +500,6 @@ nexti: mflr r1 /* R1 = our PC */ li r3, 0 mtspr MAS1, r3 1: cmpw r3, r14 -#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL) - cmpwi cr1, r3, CONFIG_SYS_PPC_E500_DEBUG_TLB - cror cr0*4+eq, cr0*4+eq, cr1*4+eq -#endif rlwinm r5, r3, 16, MAS0_ESEL_MSK addi r3, r3, 1 beq 2f /* skip the entry we're executing from */ @@ -553,6 +515,46 @@ nexti: mflr r1 /* R1 = our PC */ 2: cmpw r3, r4 blt 1b +#if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(MINIMAL_SPL) +/* + * TLB entry for debuggging in AS1 + * Create temporary TLB entry in AS0 to handle debug exception + * As on debug exception MSR is cleared i.e. Address space is changed + * to 0. A TLB entry (in AS0) is required to handle debug exception generated + * in AS1. + */ + +#ifdef NOR_BOOT +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * bacause flash's virtual address maps to 0xff800000 - 0xffffffff. + * and this window is outside of 4K boot window. + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_4M, \ + CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \ + 0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 + +#elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT) + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_1M, \ + CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#else +/* + * TLB entry is created for IVPR + IVOR15 to map on valid OP code address + * because "nexti" will resize TLB to 4K + */ + create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \ + 0, BOOKE_PAGESZ_256K, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS2_I, \ + CONFIG_SYS_MONITOR_BASE & 0xfffc0000, MAS3_SX|MAS3_SW|MAS3_SR, \ + 0, r6 +#endif +#endif + /* * Relocate CCSR, if necessary. We relocate CCSR if (obviously) the default * location is not where we want it. This typically happens on a 36-bit @@ -1036,7 +1038,7 @@ create_init_ram_area: lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l -#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT) +#ifdef NOR_BOOT /* create a temp mapping in AS=1 to the 4M boot window */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_4M, \ @@ -1050,8 +1052,8 @@ create_init_ram_area: */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_PBI_FLASH_WINDOW & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #else /* @@ -1060,8 +1062,8 @@ create_init_ram_area: */ create_tlb1_entry 15, \ 1, BOOKE_PAGESZ_1M, \ - CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \ - CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS2_I|MAS2_G, \ + CONFIG_SYS_MONITOR_BASE & 0xfff00000, MAS3_SX|MAS3_SW|MAS3_SR, \ 0, r6 #endif @@ -1111,7 +1113,8 @@ switch_as: bdnz 1b /* Jump out the last 4K page and continue to 'normal' start */ -#ifdef CONFIG_SYS_RAMBOOT +#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL) + /* We assume that we're already running at the address we're linked at */ b _start_cont #else /* Calculate absolute address in FLASH and jump there */ @@ -1157,7 +1160,7 @@ _start_cont: /* NOTREACHED - board_init_f() does not return */ -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL . = EXC_OFF_SYS_RESET .globl _start_of_vectors _start_of_vectors: @@ -1601,7 +1604,7 @@ in32: in32r: lwbrx r3,r0,r3 blr -#endif /* !CONFIG_NAND_SPL */ +#endif /* !MINIMAL_SPL */ /*------------------------------------------------------------------------------*/ @@ -1798,7 +1801,7 @@ clear_bss: mr r4,r10 /* Destination Address */ bl board_init_r -#ifndef CONFIG_NAND_SPL +#ifndef MINIMAL_SPL /* * Copy exception vector code to low memory * @@ -1971,4 +1974,4 @@ setup_ivors: #include "fixed_ivor.S" blr -#endif /* !CONFIG_NAND_SPL */ +#endif /* !MINIMAL_SPL */ diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c index a548dec9a7..f44fadcffd 100644 --- a/arch/powerpc/cpu/mpc85xx/tlb.c +++ b/arch/powerpc/cpu/mpc85xx/tlb.c @@ -55,7 +55,7 @@ void init_tlbs(void) return ; } -#ifndef CONFIG_NAND_SPL +#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) void read_tlbcam_entry(int idx, u32 *valid, u32 *tsize, unsigned long *epn, phys_addr_t *rpn) { @@ -332,4 +332,4 @@ void clear_ddr_tlbs(unsigned int memsize_in_meg) } -#endif /* !CONFIG_NAND_SPL */ +#endif /* not SPL */ diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds new file mode 100644 index 0000000000..1c408e29f5 --- /dev/null +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2006 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de + * + * Copyright 2009 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include "config.h" /* CONFIG_BOARDDIR */ + +OUTPUT_ARCH(powerpc) +SECTIONS +{ + . = CONFIG_SPL_TEXT_BASE; + .text : { + *(.text*) + } + _etext = .; + + .reloc : { + _GOT2_TABLE_ = .; + KEEP(*(.got2)) + KEEP(*(.got)) + PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); + _FIXUP_TABLE_ = .; + KEEP(*(.fixup)) + } + __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + . = ALIGN(8); + .data : { + *(.rodata*) + *(.data*) + *(.sdata*) + } + _edata = .; + + . = ALIGN(8); + __init_begin = .; + __init_end = .; +/* FIXME for non-NAND SPL */ +#if defined(CONFIG_FSL_IFC) /* Restrict bootpg at 4K boundry for IFC */ + .bootpg ADDR(.text) + 0x1000 : + { + start.o (.bootpg) + } +#define RESET_VECTOR_OFFSET 0x1ffc /* IFC has 8K sram */ +#elif defined(CONFIG_FSL_ELBC) +#define RESET_VECTOR_OFFSET 0xffc /* LBC has 4k sram */ +#else +#error unknown NAND controller +#endif + .resetvec ADDR(.text) + RESET_VECTOR_OFFSET : { + KEEP(*(.resetvec)) + } = 0xffff + + /* + * Make sure that the bss segment isn't linked at 0x0, otherwise its + * address won't be updated during relocation fixups. + */ + . |= 0x10; + + __bss_start = .; + .bss : { + *(.sbss*) + *(.bss*) + } + __bss_end__ = .; +} |