1 files changed, 0 insertions, 64 deletions
diff --git a/board/bf548-ezkit/bf548-ezkit.c b/board/bf548-ezkit/bf548-ezkit.c
deleted file mode 100644
index 31d6eeec0c..0000000000
--- a/board/bf548-ezkit/bf548-ezkit.c
+++ /dev/null
@@ -1,64 +0,0 @@
-/*
- * U-Boot - main board file
- *
- * Copyright (c) 2005-2008 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#include <common.h>
-#include <config.h>
-#include <command.h>
-#include <netdev.h>
-#include <asm/blackfin.h>
-#include <asm/gpio.h>
-#include <asm/portmux.h>
-#include <asm/sdh.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkboard(void)
-{
-	printf("Board: ADI BF548 EZ-Kit board\n");
-	printf("       Support: http://blackfin.uclinux.org/\n");
-	return 0;
-}
-
-int board_early_init_f(void)
-{
-	/* Set async addr lines as peripheral */
-	const unsigned short pins[] = {
-		P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12,
-		P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20,
-		P_A21, P_A22, P_A23, P_A24, 0
-	};
-	return peripheral_request_list(pins, "async");
-}
-
-#ifdef CONFIG_SMC911X
-int board_eth_init(bd_t *bis)
-{
-	return smc911x_initialize(0, CONFIG_SMC911X_BASE);
-}
-#endif
-
-#ifdef CONFIG_BFIN_SDH
-int board_mmc_init(bd_t *bis)
-{
-	return bfin_mmc_init(bis);
-}
-#endif
-
-#ifdef CONFIG_USB_BLACKFIN
-void board_musb_init(void)
-{
-	/*
-	 * Rev 1.0 BF549 EZ-KITs require PE7 to be high for both device
-	 * and OTG host modes, while rev 1.1 and greater require PE7 to
-	 * be low for device mode and high for host mode.  We set it high
-	 * here because we are in host mode.
-	 */
-	gpio_request(GPIO_PE7, "musb-vbus");
-	gpio_direction_output(GPIO_PE7, 1);
-}
-#endif