diff options
Diffstat (limited to 'board/st/common/Kconfig')
| -rw-r--r-- | board/st/common/Kconfig | 64 |
1 files changed, 64 insertions, 0 deletions
diff --git a/board/st/common/Kconfig b/board/st/common/Kconfig index af01ca4891..015ba40939 100644 --- a/board/st/common/Kconfig +++ b/board/st/common/Kconfig @@ -5,3 +5,67 @@ config CMD_STBOARD help This compile the stboard command to read and write the board in the OTP. + +config MTDPARTS_NAND0_BOOT + string "mtd boot partitions for nand0" + default "2m(fsbl),2m(ssbl1),2m(ssbl2)" + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + help + This define the partitions of nand0 used to build mtparts dynamically + for boot from nand0. + Each partition need to be aligned with the device erase block size, + 512KB is the max size for the NAND supported by stm32mp1 platform. + +config MTDPARTS_NAND0_TEE + string "mtd tee partitions for nand0" + default "512k(teeh),512k(teed),512k(teex)" + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + help + This define the tee partitions added in mtparts dynamically + when tee is supported with boot from nand0. + Each partition need to be aligned with the device erase block size, + 512KB is the max size for the NAND supported by stm32mp1 platform. + +config MTDPARTS_NOR0_BOOT + string "mtd boot partitions for nor0" + default "256k(fsbl1),256k(fsbl2),2m(ssbl),512k(u-boot-env)" + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + help + This define the partitions of nand0 used to build mtparts dynamically + for boot from nor0. + Each partition need to be aligned with the device erase block size, + with 256KB we support all the NOR. + U-Boot env partition (512kB) use 2 erase block for redundancy. + +config MTDPARTS_NOR0_TEE + string "mtd tee partitions for nor0" + default "256k(teeh),256k(teed),256k(teex)" + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + help + This define the tee partitions added in mtparts dynamically + when tee is supported with boot from nor0. + +config MTDPARTS_SPINAND0_BOOT + string "mtd boot partitions for spi-nand0" + default "2m(fsbl),2m(ssbl1),2m(ssbl2)" + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + help + This define the partitions of nand0 used to build mtparts dynamically + for boot from spi-nand0, + 512KB is the max size for the NAND supported by stm32mp1 platform. + +config MTDPARTS_SPINAND0_TEE + string "mtd tee partitions for spi-nand0" + default "512k(teeh),512k(teed),512k(teex)" + depends on SYS_MTDPARTS_RUNTIME && ARCH_STM32MP + help + This define the tee partitions added in mtparts dynamically + when tee is supported with boot from spi-nand0, + 512KB is the max size for the NAND supported by stm32mp1 platform. + +config DFU_ALT_RAM0 + string "dfu for ram0" + default "uImage ram 0xc2000000 0x2000000;devicetree.dtb ram 0xc4000000 0x100000;uramdisk.image.gz ram 0xc4400000 0x10000000" + depends on ARCH_STM32MP && SET_DFU_ALT_INFO + help + This defines the partitions of ram used to build dfu dynamically. |