diff options
Diffstat (limited to 'board/st/common/stpmic1.c')
| -rw-r--r-- | board/st/common/stpmic1.c | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/board/st/common/stpmic1.c b/board/st/common/stpmic1.c new file mode 100644 index 0000000000..3aa379e8a5 --- /dev/null +++ b/board/st/common/stpmic1.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause +/* + * Copyright (C) 2020, STMicroelectronics - All Rights Reserved + */ + +#include <common.h> +#include <dm.h> +#include <asm/io.h> +#include <asm/arch/ddr.h> +#include <linux/bitops.h> +#include <linux/delay.h> +#include <power/pmic.h> +#include <power/stpmic1.h> + +int board_ddr_power_init(enum ddr_type ddr_type) +{ + struct udevice *dev; + bool buck3_at_1800000v = false; + int ret; + u32 buck2; + + ret = uclass_get_device_by_driver(UCLASS_PMIC, + DM_GET_DRIVER(pmic_stpmic1), &dev); + if (ret) + /* No PMIC on board */ + return 0; + + switch (ddr_type) { + case STM32MP_DDR3: + /* VTT = Set LDO3 to sync mode */ + ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); + if (ret < 0) + return ret; + + ret &= ~STPMIC1_LDO3_MODE; + ret &= ~STPMIC1_LDO12356_VOUT_MASK; + ret |= STPMIC1_LDO_VOUT(STPMIC1_LDO3_DDR_SEL); + + ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + ret); + if (ret < 0) + return ret; + + /* VDD_DDR = Set BUCK2 to 1.35V */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_VOUT_MASK, + STPMIC1_BUCK2_1350000V); + if (ret < 0) + return ret; + + /* Enable VDD_DDR = BUCK2 */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VREF */ + ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, + STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VTT = LDO3 */ + ret = pmic_clrsetbits(dev, + STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + break; + + case STM32MP_LPDDR2_16: + case STM32MP_LPDDR2_32: + case STM32MP_LPDDR3_16: + case STM32MP_LPDDR3_32: + /* + * configure VDD_DDR1 = LDO3 + * Set LDO3 to 1.8V + * + bypass mode if BUCK3 = 1.8V + * + normal mode if BUCK3 != 1.8V + */ + ret = pmic_reg_read(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK3)); + if (ret < 0) + return ret; + + if ((ret & STPMIC1_BUCK3_1800000V) == STPMIC1_BUCK3_1800000V) + buck3_at_1800000v = true; + + ret = pmic_reg_read(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3)); + if (ret < 0) + return ret; + + ret &= ~STPMIC1_LDO3_MODE; + ret &= ~STPMIC1_LDO12356_VOUT_MASK; + ret |= STPMIC1_LDO3_1800000; + if (buck3_at_1800000v) + ret |= STPMIC1_LDO3_MODE; + + ret = pmic_reg_write(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + ret); + if (ret < 0) + return ret; + + /* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/ + switch (ddr_type) { + case STM32MP_LPDDR2_32: + case STM32MP_LPDDR3_32: + buck2 = STPMIC1_BUCK2_1250000V; + break; + default: + case STM32MP_LPDDR2_16: + case STM32MP_LPDDR3_16: + buck2 = STPMIC1_BUCK2_1200000V; + break; + } + + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_VOUT_MASK, + buck2); + if (ret < 0) + return ret; + + /* Enable VDD_DDR1 = LDO3 */ + ret = pmic_clrsetbits(dev, STPMIC1_LDOX_MAIN_CR(STPMIC1_LDO3), + STPMIC1_LDO_ENA, STPMIC1_LDO_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VDD_DDR2 =BUCK2 */ + ret = pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), + STPMIC1_BUCK_ENA, STPMIC1_BUCK_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + /* Enable VREF */ + ret = pmic_clrsetbits(dev, STPMIC1_REFDDR_MAIN_CR, + STPMIC1_VREF_ENA, STPMIC1_VREF_ENA); + if (ret < 0) + return ret; + + mdelay(STPMIC1_DEFAULT_START_UP_DELAY_MS); + + break; + + default: + break; + }; + + return 0; +} + +static int stmpic_buck1_set(struct udevice *dev, u32 voltage_mv) +{ + u32 value; + + /* VDDCORE= STMPCI1 BUCK1 ramp=+25mV, 5 => 725mV, 36 => 1500mV */ + value = ((voltage_mv - 725) / 25) + 5; + if (value < 5) + value = 5; + if (value > 36) + value = 36; + + return pmic_clrsetbits(dev, + STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK1), + STPMIC1_BUCK_VOUT_MASK, + STPMIC1_BUCK_VOUT(value)); +} + +/* early init of PMIC */ +void stpmic1_init(u32 voltage_mv) +{ + struct udevice *dev; + + if (uclass_get_device_by_driver(UCLASS_PMIC, + DM_GET_DRIVER(pmic_stpmic1), &dev)) + return; + + /* update VDDCORE = BUCK1 */ + if (voltage_mv) + stmpic_buck1_set(dev, voltage_mv); + + /* Keep vdd on during the reset cycle */ + pmic_clrsetbits(dev, + STPMIC1_BUCKS_MRST_CR, + STPMIC1_MRST_BUCK(STPMIC1_BUCK3), + STPMIC1_MRST_BUCK(STPMIC1_BUCK3)); + + /* Check if debug is enabled to program PMIC according to the bit */ + if (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_DEBUG_ON) { + printf("Keep debug unit ON\n"); + + pmic_clrsetbits(dev, STPMIC1_BUCKS_MRST_CR, + STPMIC1_MRST_BUCK_DEBUG, + STPMIC1_MRST_BUCK_DEBUG); + + if (STPMIC1_MRST_LDO_DEBUG) + pmic_clrsetbits(dev, STPMIC1_LDOS_MRST_CR, + STPMIC1_MRST_LDO_DEBUG, + STPMIC1_MRST_LDO_DEBUG); + } +} |