4 files changed, 1 insertions, 21 deletions
diff --git a/board/xes/xpedite517x/ddr.c b/board/xes/xpedite517x/ddr.c
index 1d57d0909a..981bf41e09 100644
--- a/board/xes/xpedite517x/ddr.c
+++ b/board/xes/xpedite517x/ddr.c
@@ -32,11 +32,6 @@ static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 		sizeof(ddr2_spd_eeprom_t));
 }
 
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_bus_freq(0);
-}
-
 void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 			unsigned int ctrl_num)
 {
@@ -144,7 +139,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	unsigned int datarate;
 
 	get_sys_info(&sysinfo);
-	datarate = fsl_ddr_get_mem_data_rate() / 1000000;
+	datarate = get_ddr_freq(0) / 1000000;
 
 	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
 		if ((bopts[i].datarate_mhz_low <= datarate) &&
diff --git a/board/xes/xpedite520x/ddr.c b/board/xes/xpedite520x/ddr.c
index c5616d546b..f8d945ace3 100644
--- a/board/xes/xpedite520x/ddr.c
+++ b/board/xes/xpedite520x/ddr.c
@@ -27,11 +27,6 @@ get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 	}
 }
 
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_ddr_freq(0);
-}
-
 void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 			unsigned int ctrl_num)
 {
diff --git a/board/xes/xpedite537x/ddr.c b/board/xes/xpedite537x/ddr.c
index 4d3f255d70..307f875db9 100644
--- a/board/xes/xpedite537x/ddr.c
+++ b/board/xes/xpedite537x/ddr.c
@@ -33,11 +33,6 @@ static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
 		 sizeof(ddr2_spd_eeprom_t));
 }
 
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_ddr_freq(0);
-}
-
 void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
 		      unsigned int ctrl_num)
 {
diff --git a/board/xes/xpedite550x/ddr.c b/board/xes/xpedite550x/ddr.c
index 38a459715f..9e6964960c 100644
--- a/board/xes/xpedite550x/ddr.c
+++ b/board/xes/xpedite550x/ddr.c
@@ -46,11 +46,6 @@ void fsl_ddr_get_spd(ddr3_spd_eeprom_t *ctrl_dimms_spd,
 	}
 }
 
-unsigned int fsl_ddr_get_mem_data_rate(void)
-{
-	return get_ddr_freq(0);
-}
-
 /*
  *     There are traditionally three board-specific SDRAM timing parameters
  *     which must be calculated based on the particular PCB artwork.  These are: