diff options
Diffstat (limited to 'doc/README.x86')
| -rw-r--r-- | doc/README.x86 | 23 |
1 files changed, 0 insertions, 23 deletions
diff --git a/doc/README.x86 b/doc/README.x86 index 8e549c3313..5e85b57665 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -203,29 +203,6 @@ Flash map for samus / broadwell: --- -Intel Cougar Canyon 2 specific instructions for bare mode: - -This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors -with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP -website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the -time of writing) in the board directory and rename it to fsp.bin. - -Now build U-Boot and obtain u-boot.rom - -$ make cougarcanyon2_defconfig -$ make all - -The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in -the board manual. The SPI-0 flash should have flash descriptor plus ME firmware -and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0 -flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program -this image to the SPI-0 flash according to the board manual just once and we are -all set. For programming U-Boot we just need to program SPI-1 flash. Since the -default u-boot.rom image for this board is set to 2MB, it should be programmed -to the last 2MB of the 8MB chip, address range [600000, 7FFFFF]. - ---- - Intel Galileo instructions for bare mode: Only one binary blob is needed for Remote Management Unit (RMU) within Intel |