1 files changed, 288 insertions, 0 deletions
diff --git a/drivers/fpga/intel_sdm_mb.c b/drivers/fpga/intel_sdm_mb.c
new file mode 100644
index 0000000000..9a1dc2c0c8
--- /dev/null
+++ b/drivers/fpga/intel_sdm_mb.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Intel Corporation <www.intel.com>
+ */
+
+#include <common.h>
+#include <altera.h>
+#include <log.h>
+#include <watchdog.h>
+#include <asm/arch/mailbox_s10.h>
+#include <linux/delay.h>
+
+#define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS		60000
+#define RECONFIG_STATUS_INTERVAL_DELAY_US		1000000
+
+static const struct mbox_cfgstat_state {
+	int			err_no;
+	const char		*error_name;
+} mbox_cfgstat_state[] = {
+	{MBOX_CFGSTAT_STATE_IDLE, "FPGA in idle mode."},
+	{MBOX_CFGSTAT_STATE_CONFIG, "FPGA in config mode."},
+	{MBOX_CFGSTAT_STATE_FAILACK, "Acknowledgment failed!"},
+	{MBOX_CFGSTAT_STATE_ERROR_INVALID, "Invalid bitstream!"},
+	{MBOX_CFGSTAT_STATE_ERROR_CORRUPT, "Corrupted bitstream!"},
+	{MBOX_CFGSTAT_STATE_ERROR_AUTH, "Authentication failed!"},
+	{MBOX_CFGSTAT_STATE_ERROR_CORE_IO, "I/O error!"},
+	{MBOX_CFGSTAT_STATE_ERROR_HARDWARE, "Hardware error!"},
+	{MBOX_CFGSTAT_STATE_ERROR_FAKE, "Fake error!"},
+	{MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO, "Error in boot info!"},
+	{MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR, "Error in QSPI!"},
+	{MBOX_RESP_ERROR, "Mailbox general error!"},
+	{-ETIMEDOUT, "I/O timeout error"},
+	{-1, "Unknown error!"}
+};
+
+#define MBOX_CFGSTAT_MAX ARRAY_SIZE(mbox_cfgstat_state)
+
+static const char *mbox_cfgstat_to_str(int err)
+{
+	int i;
+
+	for (i = 0; i < MBOX_CFGSTAT_MAX - 1; i++) {
+		if (mbox_cfgstat_state[i].err_no == err)
+			return mbox_cfgstat_state[i].error_name;
+	}
+
+	return mbox_cfgstat_state[MBOX_CFGSTAT_MAX - 1].error_name;
+}
+
+/*
+ * Add the ongoing transaction's command ID into pending list and return
+ * the command ID for next transfer.
+ */
+static u8 add_transfer(u32 *xfer_pending_list, size_t list_size, u8 id)
+{
+	int i;
+
+	for (i = 0; i < list_size; i++) {
+		if (xfer_pending_list[i])
+			continue;
+		xfer_pending_list[i] = id;
+		debug("ID(%d) added to transaction pending list\n", id);
+		/*
+		 * Increment command ID for next transaction.
+		 * Valid command ID (4 bits) is from 1 to 15.
+		 */
+		id = (id % 15) + 1;
+		break;
+	}
+
+	return id;
+}
+
+/*
+ * Check whether response ID match the command ID in the transfer
+ * pending list. If a match is found in the transfer pending list,
+ * it clears the transfer pending list and return the matched
+ * command ID.
+ */
+static int get_and_clr_transfer(u32 *xfer_pending_list, size_t list_size,
+				u8 id)
+{
+	int i;
+
+	for (i = 0; i < list_size; i++) {
+		if (id != xfer_pending_list[i])
+			continue;
+		xfer_pending_list[i] = 0;
+		return id;
+	}
+
+	return 0;
+}
+
+/*
+ * Polling the FPGA configuration status.
+ * Return 0 for success, non-zero for error.
+ */
+static int reconfig_status_polling_resp(void)
+{
+	int ret;
+	unsigned long start = get_timer(0);
+
+	while (1) {
+		ret = mbox_get_fpga_config_status(MBOX_RECONFIG_STATUS);
+		if (!ret)
+			return 0;	/* configuration success */
+
+		if (ret != MBOX_CFGSTAT_STATE_CONFIG)
+			return ret;
+
+		if (get_timer(start) > RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS)
+			break;	/* time out */
+
+		puts(".");
+		udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
+		WATCHDOG_RESET();
+	}
+
+	return -ETIMEDOUT;
+}
+
+static u32 get_resp_hdr(u32 *r_index, u32 *w_index, u32 *resp_count,
+			u32 *resp_buf, u32 buf_size, u32 client_id)
+{
+	u32 buf[MBOX_RESP_BUFFER_SIZE];
+	u32 mbox_hdr;
+	u32 resp_len;
+	u32 hdr_len;
+	u32 i;
+
+	if (*resp_count < buf_size) {
+		u32 rcv_len_max = buf_size - *resp_count;
+
+		if (rcv_len_max > MBOX_RESP_BUFFER_SIZE)
+			rcv_len_max = MBOX_RESP_BUFFER_SIZE;
+		resp_len = mbox_rcv_resp(buf, rcv_len_max);
+
+		for (i = 0; i < resp_len; i++) {
+			resp_buf[(*w_index)++] = buf[i];
+			*w_index %= buf_size;
+			(*resp_count)++;
+		}
+	}
+
+	/* No response in buffer */
+	if (*resp_count == 0)
+		return 0;
+
+	mbox_hdr = resp_buf[*r_index];
+
+	hdr_len = MBOX_RESP_LEN_GET(mbox_hdr);
+
+	/* Insufficient header length to return a mailbox header */
+	if ((*resp_count - 1) < hdr_len)
+		return 0;
+
+	*r_index += (hdr_len + 1);
+	*r_index %= buf_size;
+	*resp_count -= (hdr_len + 1);
+
+	/* Make sure response belongs to us */
+	if (MBOX_RESP_CLIENT_GET(mbox_hdr) != client_id)
+		return 0;
+
+	return mbox_hdr;
+}
+
+/* Send bit stream data to SDM via RECONFIG_DATA mailbox command */
+static int send_reconfig_data(const void *rbf_data, size_t rbf_size,
+			      u32 xfer_max, u32 buf_size_max)
+{
+	u32 response_buffer[MBOX_RESP_BUFFER_SIZE];
+	u32 xfer_pending[MBOX_RESP_BUFFER_SIZE];
+	u32 resp_rindex = 0;
+	u32 resp_windex = 0;
+	u32 resp_count = 0;
+	u32 xfer_count = 0;
+	int resp_err = 0;
+	u8 cmd_id = 1;
+	u32 args[3];
+	int ret;
+
+	debug("SDM xfer_max = %d\n", xfer_max);
+	debug("SDM buf_size_max = %x\n\n", buf_size_max);
+
+	memset(xfer_pending, 0, sizeof(xfer_pending));
+
+	while (rbf_size || xfer_count) {
+		if (!resp_err && rbf_size && xfer_count < xfer_max) {
+			args[0] = MBOX_ARG_DESC_COUNT(1);
+			args[1] = (u64)rbf_data;
+			if (rbf_size >= buf_size_max) {
+				args[2] = buf_size_max;
+				rbf_size -= buf_size_max;
+				rbf_data += buf_size_max;
+			} else {
+				args[2] = (u64)rbf_size;
+				rbf_size = 0;
+			}
+
+			resp_err = mbox_send_cmd_only(cmd_id, MBOX_RECONFIG_DATA,
+						 MBOX_CMD_INDIRECT, 3, args);
+			if (!resp_err) {
+				xfer_count++;
+				cmd_id = add_transfer(xfer_pending,
+						      MBOX_RESP_BUFFER_SIZE,
+						      cmd_id);
+			}
+			puts(".");
+		} else {
+			u32 resp_hdr = get_resp_hdr(&resp_rindex, &resp_windex,
+						    &resp_count,
+						    response_buffer,
+						    MBOX_RESP_BUFFER_SIZE,
+						    MBOX_CLIENT_ID_UBOOT);
+
+			/*
+			 * If no valid response header found or
+			 * non-zero length from RECONFIG_DATA
+			 */
+			if (!resp_hdr || MBOX_RESP_LEN_GET(resp_hdr))
+				continue;
+
+			/* Check for response's status */
+			if (!resp_err) {
+				resp_err = MBOX_RESP_ERR_GET(resp_hdr);
+				debug("Response error code: %08x\n", resp_err);
+			}
+
+			ret = get_and_clr_transfer(xfer_pending,
+						   MBOX_RESP_BUFFER_SIZE,
+						   MBOX_RESP_ID_GET(resp_hdr));
+			if (ret) {
+				/* Claim and reuse the ID */
+				cmd_id = (u8)ret;
+				xfer_count--;
+			}
+
+			if (resp_err && !xfer_count)
+				return resp_err;
+		}
+		WATCHDOG_RESET();
+	}
+
+	return 0;
+}
+
+/*
+ * This is the interface used by FPGA driver.
+ * Return 0 for success, non-zero for error.
+ */
+int intel_sdm_mb_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
+{
+	int ret;
+	u32 resp_len = 2;
+	u32 resp_buf[2];
+
+	debug("Sending MBOX_RECONFIG...\n");
+	ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RECONFIG, MBOX_CMD_DIRECT, 0,
+			    NULL, 0, &resp_len, resp_buf);
+	if (ret) {
+		puts("Failure in RECONFIG mailbox command!\n");
+		return ret;
+	}
+
+	ret = send_reconfig_data(rbf_data, rbf_size, resp_buf[0], resp_buf[1]);
+	if (ret) {
+		printf("RECONFIG_DATA error: %08x, %s\n", ret,
+		       mbox_cfgstat_to_str(ret));
+		return ret;
+	}
+
+	/* Make sure we don't send MBOX_RECONFIG_STATUS too fast */
+	udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
+
+	debug("Polling with MBOX_RECONFIG_STATUS...\n");
+	ret = reconfig_status_polling_resp();
+	if (ret) {
+		printf("RECONFIG_STATUS Error: %08x, %s\n", ret,
+		       mbox_cfgstat_to_str(ret));
+		return ret;
+	}
+
+	puts("FPGA reconfiguration OK!\n");
+
+	return ret;
+}