diff options
Diffstat (limited to 'include/configs/T208xRDB.h')
| -rw-r--r-- | include/configs/T208xRDB.h | 53 |
1 files changed, 8 insertions, 45 deletions
diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 601e67c80c..6824be9e75 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -24,8 +24,6 @@ #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS #ifdef CONFIG_RAMBOOT_PBL -#define CONFIG_SYS_FSL_PBL_PBI board/freescale/t208xrdb/t2080_pbi.cfg - #define CONFIG_SPL_FLUSH_IMAGE #define CONFIG_SPL_PAD_TO 0x40000 #define CONFIG_SPL_MAX_SIZE 0x28000 @@ -42,7 +40,6 @@ #define CONFIG_SYS_NAND_U_BOOT_DST 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_nand_rcw.cfg #endif #ifdef CONFIG_SPIFLASH @@ -55,7 +52,6 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_spi_rcw.cfg #endif #ifdef CONFIG_SDCARD @@ -67,7 +63,6 @@ #ifndef CONFIG_SPL_BUILD #define CONFIG_SYS_MPC85XX_NO_RESETVEC #endif -#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xrdb/t2080_sd_rcw.cfg #endif #endif /* CONFIG_RAMBOOT_PBL */ @@ -90,19 +85,15 @@ */ #define CONFIG_SYS_CACHE_STASHING #define CONFIG_BTB /* toggle branch predition */ -#define CONFIG_DDR_ECC #ifdef CONFIG_DDR_ECC -#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER #define CONFIG_MEM_INIT_VALUE 0xdeadbeef #endif #ifndef __ASSEMBLY__ unsigned long get_board_sys_clk(void); -unsigned long get_board_ddr_clk(void); #endif #define CONFIG_SYS_CLK_FREQ 66660000 -#define CONFIG_DDR_CLK_FREQ 133330000 /* * Config the L3 Cache as L3 SRAM @@ -119,11 +110,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull /* EEPROM */ -#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* * DDR Setup @@ -133,7 +121,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_DIMM_SLOTS_PER_CTLR 1 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define CONFIG_DDR_SPD #define CONFIG_SYS_SPD_BUS_NUM 0 #define CONFIG_SYS_SDRAM_SIZE 2048 /* for fixed parameter use */ #define SPD_EEPROM_ADDRESS1 0x51 @@ -304,7 +291,6 @@ unsigned long get_board_ddr_clk(void); GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET #define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* * Serial Port @@ -322,26 +308,6 @@ unsigned long get_board_ddr_clk(void); /* * I2C */ -#if !CONFIG_IS_ENABLED(DM_I2C) -#define CONFIG_SYS_I2C_LEGACY -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C3_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C4_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 -#define CONFIG_SYS_FSL_I2C3_OFFSET 0x119000 -#define CONFIG_SYS_FSL_I2C4_OFFSET 0x119100 -#define CONFIG_SYS_FSL_I2C_SPEED 100000 -#define CONFIG_SYS_FSL_I2C2_SPEED 100000 -#define CONFIG_SYS_FSL_I2C3_SPEED 100000 -#define CONFIG_SYS_FSL_I2C4_SPEED 100000 -#else -#define CONFIG_I2C_SET_DEFAULT_BUS_NUM -#define CONFIG_I2C_DEFAULT_BUS_NUMBER 0 -#endif - -#define CONFIG_SYS_I2C_FSL #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ #define I2C_MUX_PCA_ADDR_SEC1 0x75 /* I2C bus multiplexer,secondary 1 */ @@ -565,7 +531,6 @@ unsigned long get_board_ddr_clk(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data @@ -587,8 +552,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTFILE "uImage" #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server */ -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 1000000 #define __USB_PHY_TYPE utmi #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -616,7 +579,7 @@ unsigned long get_board_ddr_clk(void); * For emulation this causes u-boot to jump to the start of the * proof point app code automatically */ -#define CONFIG_PROOF_POINTS \ +#define PROOF_POINTS \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "cpu 1 release 0x29000000 - - -;" \ @@ -628,11 +591,11 @@ unsigned long get_board_ddr_clk(void); "cpu 7 release 0x29000000 - - -;" \ "go 0x29000000" -#define CONFIG_HVBOOT \ +#define HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ "bootm 0x01000000 - 0x00f00000" -#define CONFIG_ALU \ +#define ALU \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "cpu 1 release 0x01000000 - - -;" \ @@ -644,7 +607,7 @@ unsigned long get_board_ddr_clk(void); "cpu 7 release 0x01000000 - - -;" \ "go 0x01000000" -#define CONFIG_LINUX \ +#define LINUXBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "setenv ramdiskaddr 0x02000000;" \ @@ -652,14 +615,14 @@ unsigned long get_board_ddr_clk(void); "setenv loadaddr 0x1000000;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" -#define CONFIG_HDBOOT \ +#define HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $loadaddr $bootfile;" \ "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_NFSBOOTCOMMAND \ +#define NFSBOOTCOMMAND \ "setenv bootargs root=/dev/nfs rw " \ "nfsroot=$serverip:$rootpath " \ "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ @@ -668,7 +631,7 @@ unsigned long get_board_ddr_clk(void); "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr - $fdtaddr" -#define CONFIG_RAMBOOTCOMMAND \ +#define RAMBOOTCOMMAND \ "setenv bootargs root=/dev/ram rw " \ "console=$consoledev,$baudrate $othbootargs;" \ "tftp $ramdiskaddr $ramdiskfile;" \ @@ -676,7 +639,7 @@ unsigned long get_board_ddr_clk(void); "tftp $fdtaddr $fdtfile;" \ "bootm $loadaddr $ramdiskaddr $fdtaddr" -#define CONFIG_BOOTCOMMAND CONFIG_LINUX +#define CONFIG_BOOTCOMMAND LINUXBOOTCOMMAND #include <asm/fsl_secure_boot.h> |