diff options
Diffstat (limited to 'include/configs/bf526-ezbrd.h')
| -rw-r--r-- | include/configs/bf526-ezbrd.h | 147 |
1 files changed, 0 insertions, 147 deletions
diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h deleted file mode 100644 index 7d75e73f72..0000000000 --- a/include/configs/bf526-ezbrd.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * U-Boot - Configuration file for BF526 EZBrd board - */ - -#ifndef __CONFIG_BF526_EZBRD_H__ -#define __CONFIG_BF526_EZBRD_H__ - -#include <asm/config-pre.h> - -/* - * Processor Settings - */ -#define CONFIG_BFIN_CPU bf526-0.0 -#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA - -/* - * Clock Settings - * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV - * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV - */ -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 25000000 -/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ -/* 1 = CLKIN / 2 */ -#define CONFIG_CLKIN_HALF 0 -/* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ -/* 1 = bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ -/* Values can range from 0-63 (where 0 means 64) */ -#define CONFIG_VCO_MULT 16 -/* CCLK_DIV controls the core clock divider */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* SCLK_DIV controls the system clock divider */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 5 - -/* - * Memory Settings - */ -/* This board has a 64meg MT48H32M16 */ -#define CONFIG_MEM_ADD_WDTH 10 -#define CONFIG_MEM_SIZE 64 - -#define CONFIG_EBIU_SDRRC_VAL 0x0267 -#define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_2 | PASR_ALL | TRAS_6 | TRP_4 | TRCD_2 | TWR_2 | PSS) - -#define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) -#define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) -#define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) - -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) - -/* - * NAND Settings - * (can't be used same time as ethernet) - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) -# define CONFIG_BFIN_NFC -# define CONFIG_BFIN_NFC_BOOTROM_ECC -#endif -#ifdef CONFIG_BFIN_NFC -#define CONFIG_BFIN_NFC_CTL_VAL 0x0033 -#define CONFIG_DRIVER_NAND_BFIN -#define CONFIG_SYS_NAND_BASE 0 /* not actually used */ -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_CMD_NAND -#endif - -/* - * Network Settings - */ -#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \ - !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC) -#define ADI_CMDS_NETWORK 1 -#define CONFIG_BFIN_MAC -#define CONFIG_RMII -#define CONFIG_NETCONSOLE 1 -#endif -#define CONFIG_HOSTNAME bf526-ezbrd - -/* - * Flash Settings - */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_BASE 0x20000000 -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 71 - -/* - * SPI Settings - */ -#define CONFIG_BFIN_SPI -#define CONFIG_ENV_SPI_MAX_HZ 30000000 -#define CONFIG_SF_DEFAULT_SPEED 30000000 - -/* - * Env Storage Settings - */ -#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#else -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_OFFSET 0x4000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#endif -#define CONFIG_ENV_IS_EMBEDDED_IN_LDR - -/* - * I2C Settings - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_ADI - -/* - * USB Settings - */ -#if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) -#define CONFIG_USB_MUSB_HCD -#define CONFIG_USB_BLACKFIN -#define CONFIG_USB_MUSB_TIMEOUT 100000 -#endif - -/* - * Misc Settings - */ -#define CONFIG_MISC_INIT_R -#define CONFIG_RTC_BFIN -#define CONFIG_UART_CONSOLE 1 - -/* define to enable run status via led */ - -/* - * Pull in common ADI header for remaining command/environment setup - */ -#include <configs/bfin_adi_common.h> - -#endif |