diff options
Diffstat (limited to 'include/configs')
312 files changed, 0 insertions, 564 deletions
diff --git a/include/configs/10m50_devboard.h b/include/configs/10m50_devboard.h index d8ed2278c6..e3ac6fe378 100644 --- a/include/configs/10m50_devboard.h +++ b/include/configs/10m50_devboard.h @@ -57,9 +57,5 @@ * (which is common practice). */ -/* - * MISC - */ -#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */ #endif /* __CONFIG_H */ diff --git a/include/configs/3c120_devboard.h b/include/configs/3c120_devboard.h index b9a17adb12..74ecd94f79 100644 --- a/include/configs/3c120_devboard.h +++ b/include/configs/3c120_devboard.h @@ -57,9 +57,5 @@ * (which is common practice). */ -/* - * MISC - */ -#define CONFIG_SYS_LOAD_ADDR 0xd4000000 /* Half of RAM */ #endif /* __CONFIG_H */ diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 0a80dda6b5..d75946b022 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -66,8 +66,6 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_LOAD_ADDR 0x40010000 - #define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ #define CONFIG_SYS_PLL_ODR 0x36 #define CONFIG_SYS_PLL_FDR 0x7D diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 5953141be5..b0e6ed4e1d 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -78,8 +78,6 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000) - #define CONFIG_SYS_CLK 75000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2 diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index 1a1a110765..a8734697c1 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -31,8 +31,6 @@ */ #undef CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - /* * Clock configuration: enable only one of the following options */ diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 6f0e794bad..e1f54571d2 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -75,8 +75,6 @@ #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF) #define CONFIG_SYS_I2C_PINMUX_SET (0) -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ #define CONFIG_SYS_FAST_CLK #ifdef CONFIG_SYS_FAST_CLK diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 2cdd4369da..35977cc5c2 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -75,7 +75,6 @@ "save\0" \ "" -#define CONFIG_SYS_LOAD_ADDR 0x20000 #define CONFIG_SYS_CLK 66000000 /* diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 304fd60629..f66ecc8e8f 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -64,8 +64,6 @@ #define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0) #define CONFIG_SYS_I2C_PINMUX_SET (0x000F) -#define CONFIG_SYS_LOAD_ADDR 0x800000 - #define CONFIG_BOOTCOMMAND "bootm ffe40000" #ifdef CONFIG_MCFFEC diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index 6a50a25d32..acaa2f1a96 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -72,8 +72,6 @@ "save\0" \ "" -#define CONFIG_SYS_LOAD_ADDR 0x20000 - #define CONFIG_SYS_CLK 64000000 /* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */ diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index 8d2fa614cd..adb6cc4dda 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -81,8 +81,6 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_LOAD_ADDR 0x40010000 - #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 97d119da8a..fc6cd2c0ec 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -75,8 +75,6 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_LOAD_ADDR 0x40010000 - #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 459ce9c47c..0b3ee11e0c 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -77,8 +77,6 @@ #define CONFIG_PRAM 512 /* 512 KB */ -#define CONFIG_SYS_LOAD_ADDR 0x40010000 - #define CONFIG_SYS_CLK 80000000 #define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3 diff --git a/include/configs/MCR3000.h b/include/configs/MCR3000.h index 48e9ecdb80..a3ceeeb9c2 100644 --- a/include/configs/MCR3000.h +++ b/include/configs/MCR3000.h @@ -60,8 +60,6 @@ /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x200000 - #define CONFIG_SYS_HZ 1000 /* Definitions for initial stack pointer and data area (in DPRAM) */ diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 6286d5ec28..126a9b6ffe 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -230,7 +230,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8349EMDS_SDRAM.h b/include/configs/MPC8349EMDS_SDRAM.h index 45d22086a8..7e55d20d6c 100644 --- a/include/configs/MPC8349EMDS_SDRAM.h +++ b/include/configs/MPC8349EMDS_SDRAM.h @@ -285,7 +285,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index e299437a82..f4f139548b 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -315,7 +315,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 82527da431..a9edf09111 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -281,7 +281,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 289283a39f..5be6981a8c 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -407,7 +407,6 @@ extern unsigned long get_clock_freq(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index f1828a28ca..bc35572fbb 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -269,7 +269,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index ea3c39e604..9738f62f17 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -611,7 +611,6 @@ extern unsigned long get_sdram_size(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 52b9cf5755..c79ea36154 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -460,7 +460,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/SBx81LIFKW.h b/include/configs/SBx81LIFKW.h index ded494cfa9..4b5a8b56e7 100644 --- a/include/configs/SBx81LIFKW.h +++ b/include/configs/SBx81LIFKW.h @@ -89,6 +89,4 @@ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ - #endif /* _CONFIG_SBX81LIFKW_H */ diff --git a/include/configs/SBx81LIFXCAT.h b/include/configs/SBx81LIFXCAT.h index 06bbd8642e..cf20680396 100644 --- a/include/configs/SBx81LIFXCAT.h +++ b/include/configs/SBx81LIFXCAT.h @@ -89,6 +89,4 @@ #define CONFIG_PHY_BASE_ADR 0x01 #endif /* CONFIG_CMD_NET */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */ - #endif /* _CONFIG_SBX81LIFXCAT_H */ diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index 4fb22538c7..ce8c2b2a20 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -592,7 +592,6 @@ unsigned long get_board_sys_clk(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index d1b4debae6..4f589ed0c9 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -652,7 +652,6 @@ $(SRCTREE)/board/freescale/t104xrdb/t1042d4_sd_rcw.cfg /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index edf2ed8b44..70a856cf55 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -588,7 +588,6 @@ unsigned long get_board_sys_clk(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 96641152a1..1901211e4f 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -537,7 +537,6 @@ unsigned long get_board_sys_clk(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index 0486264fed..4856890dc9 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -208,7 +208,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/UCP1020.h b/include/configs/UCP1020.h index 9231676597..a3f7a22661 100644 --- a/include/configs/UCP1020.h +++ b/include/configs/UCP1020.h @@ -377,7 +377,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */ /* diff --git a/include/configs/adp-ae3xx.h b/include/configs/adp-ae3xx.h index a7adb599ca..8cb0de3caa 100644 --- a/include/configs/adp-ae3xx.h +++ b/include/configs/adp-ae3xx.h @@ -105,14 +105,6 @@ GENERATED_GBL_DATA_SIZE) /* - * Load address and memory test area should agree with - * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x300000 - -/* memtest works on 63 MB in DRAM */ - -/* * Static memory controller configuration */ #define CONFIG_FTSMC020 diff --git a/include/configs/adp-ag101p.h b/include/configs/adp-ag101p.h index afec9ba242..8d07895fe8 100644 --- a/include/configs/adp-ag101p.h +++ b/include/configs/adp-ag101p.h @@ -217,14 +217,6 @@ #endif /* CONFIG_MEM_REMAP */ /* - * Load address and memory test area should agree with - * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x300000 - -/* memtest works on 63 MB in DRAM */ - -/* * Static memory controller configuration */ #define CONFIG_FTSMC020 diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 641d8fdbd5..63b941a56b 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -28,10 +28,6 @@ "erase 0xfff00000 0xffffffff; " \ "cp.b 0x20000 0xfff00000 ${filesize}\0" -/* undef to save memory */ - -#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */ - #define CONFIG_SYS_HZ 1000 #define CONFIG_SYS_CLK 45000000 diff --git a/include/configs/ap121.h b/include/configs/ap121.h index 4902d07247..88d85ce82d 100644 --- a/include/configs/ap121.h +++ b/include/configs/ap121.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 diff --git a/include/configs/ap143.h b/include/configs/ap143.h index c79e050dc9..2001ed1f64 100644 --- a/include/configs/ap143.h +++ b/include/configs/ap143.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 diff --git a/include/configs/ap152.h b/include/configs/ap152.h index 0d2c484bb9..9e38de1710 100644 --- a/include/configs/ap152.h +++ b/include/configs/ap152.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x2000 diff --git a/include/configs/apalis-imx8.h b/include/configs/apalis-imx8.h index d5bf92a0d0..ef03e765c7 100644 --- a/include/configs/apalis-imx8.h +++ b/include/configs/apalis-imx8.h @@ -70,7 +70,6 @@ "${blkcnt}; fi\0" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/apalis-imx8x.h b/include/configs/apalis-imx8x.h index 483cf09943..9002058d9e 100644 --- a/include/configs/apalis-imx8x.h +++ b/include/configs/apalis-imx8x.h @@ -97,7 +97,6 @@ "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x89000000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index b736d19e3c..7702809916 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -71,7 +71,6 @@ #define CONFIG_NETMASK 255.255.255.0 #undef CONFIG_SERVERIP #define CONFIG_SERVERIP 192.168.10.1 -#define CONFIG_SYS_LOAD_ADDR 0x12000000 #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/armadillo-800eva.h b/include/configs/armadillo-800eva.h index 06704e5e19..db43e35292 100644 --- a/include/configs/armadillo-800eva.h +++ b/include/configs/armadillo-800eva.h @@ -44,8 +44,6 @@ #define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE) #define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \ - 64 * 1024 * 1024) #define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index 65c7d03efc..5e117fb218 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -154,9 +154,6 @@ #endif #endif -/* default RAM address for user programs */ -#define CONFIG_SYS_LOAD_ADDR 0x20000 - #define CONFIG_FPGA_COUNT 1 #define CONFIG_SYS_FPGA_PROG_FEEDBACK #define CONFIG_SYS_FPGA_WAIT 1000 diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 780bf0cce7..a3ab1ba8d3 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -106,8 +106,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index c3fe41636b..f87720d6b9 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -93,8 +93,6 @@ #endif #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_SYS_USE_DATAFLASH_CS0 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index 51ecf4173b..efc3c8c152 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -209,8 +209,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index b4aaf5995f..8655dbed1d 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -67,8 +67,6 @@ #define CONFIG_RESET_PHY_R #define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index fe99253e5a..a9ff4014ba 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -61,9 +61,6 @@ "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" -/* Ethernet */ -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* USB host */ #ifdef CONFIG_CMD_USB #define CONFIG_USB_ATMEL diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index 92b87a2b49..d7d6b55ed9 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -62,10 +62,6 @@ /* Ethernet - not present */ -/* USB - not supported */ - -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_SYS_USE_DATAFLASH /* bootstrap + u-boot + env + linux in dataflash on CS0 */ diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 6a95b39cdb..8217423fa6 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -65,8 +65,6 @@ #endif #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env + linux in nandflash */ #define CONFIG_BOOTCOMMAND "nand read " \ diff --git a/include/configs/ax25-ae350.h b/include/configs/ax25-ae350.h index bd9c371f83..5774429829 100644 --- a/include/configs/ax25-ae350.h +++ b/include/configs/ax25-ae350.h @@ -79,20 +79,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \ GENERATED_GBL_DATA_SIZE) -/* - * Load address and memory test area should agree with - * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself. - */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* SDRAM */ - -/* - * memtest works on 512 MB in DRAM - */ - -/* - * FLASH and environment organization - */ - /* use CFI framework */ #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT diff --git a/include/configs/axs10x.h b/include/configs/axs10x.h index 96a1c6400c..5baf2cb451 100644 --- a/include/configs/axs10x.h +++ b/include/configs/axs10x.h @@ -29,7 +29,6 @@ #define CONFIG_SYS_MALLOC_LEN SZ_2M #define CONFIG_SYS_BOOTM_LEN SZ_128M -#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* * UART configuration diff --git a/include/configs/bcm_ns3.h b/include/configs/bcm_ns3.h index 14275abdc4..62de1a7234 100644 --- a/include/configs/bcm_ns3.h +++ b/include/configs/bcm_ns3.h @@ -16,7 +16,6 @@ #define PHYS_SDRAM_1 V2M_BASE #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x80000) /* * Initial SP before reloaction is placed at end of first DRAM bank, diff --git a/include/configs/bcmstb.h b/include/configs/bcmstb.h index 2660d18f35..627aca81fd 100644 --- a/include/configs/bcmstb.h +++ b/include/configs/bcmstb.h @@ -88,7 +88,6 @@ extern phys_addr_t prior_stage_fdt_address; #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ CONFIG_SYS_INIT_RAM_SIZE - \ GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* * CONFIG_SYS_LOAD_ADDR - 1 MiB. diff --git a/include/configs/bg0900.h b/include/configs/bg0900.h index aacc70cd55..d9599b8591 100644 --- a/include/configs/bg0900.h +++ b/include/configs/bg0900.h @@ -20,7 +20,6 @@ /* Boot Linux */ #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTCOMMAND "bootm" -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h index a3ec719b4d..f9ea1331e4 100644 --- a/include/configs/bk4r1.h +++ b/include/configs/bk4r1.h @@ -80,7 +80,6 @@ #define FSL_QSPI_FLASH_NUM 2 #define CONFIG_SYS_FSL_QSPI_LE #endif -#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* We boot from the gfxRAM area of the OCRAM. */ #define CONFIG_BOARD_SIZE_LIMIT 520192 diff --git a/include/configs/bmips_bcm3380.h b/include/configs/bmips_bcm3380.h index 573ff3e401..472b02f104 100644 --- a/include/configs/bmips_bcm3380.h +++ b/include/configs/bmips_bcm3380.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6318.h b/include/configs/bmips_bcm6318.h index 45eb931c25..904f1b46cc 100644 --- a/include/configs/bmips_bcm6318.h +++ b/include/configs/bmips_bcm6318.h @@ -24,7 +24,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm63268.h b/include/configs/bmips_bcm63268.h index eed321eb6f..7b4329132e 100644 --- a/include/configs/bmips_bcm63268.h +++ b/include/configs/bmips_bcm63268.h @@ -24,7 +24,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6328.h b/include/configs/bmips_bcm6328.h index c78099a49d..bed22b46e5 100644 --- a/include/configs/bmips_bcm6328.h +++ b/include/configs/bmips_bcm6328.h @@ -24,7 +24,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6338.h b/include/configs/bmips_bcm6338.h index 38dd9e3af3..3a5e56de95 100644 --- a/include/configs/bmips_bcm6338.h +++ b/include/configs/bmips_bcm6338.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6348.h b/include/configs/bmips_bcm6348.h index 547cf857ce..57017a5003 100644 --- a/include/configs/bmips_bcm6348.h +++ b/include/configs/bmips_bcm6348.h @@ -22,7 +22,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6358.h b/include/configs/bmips_bcm6358.h index 116e9705b6..57f6185fe9 100644 --- a/include/configs/bmips_bcm6358.h +++ b/include/configs/bmips_bcm6358.h @@ -24,7 +24,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6362.h b/include/configs/bmips_bcm6362.h index e5e8b15e18..2f819f0c87 100644 --- a/include/configs/bmips_bcm6362.h +++ b/include/configs/bmips_bcm6362.h @@ -24,7 +24,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6368.h b/include/configs/bmips_bcm6368.h index 4d4403f8d2..58425a485e 100644 --- a/include/configs/bmips_bcm6368.h +++ b/include/configs/bmips_bcm6368.h @@ -24,7 +24,6 @@ #endif /* CONFIG_USB_OHCI_HCD */ /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/bmips_bcm6838.h b/include/configs/bmips_bcm6838.h index f1ff05414d..b4618689bc 100644 --- a/include/configs/bmips_bcm6838.h +++ b/include/configs/bmips_bcm6838.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* U-Boot */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M #if defined(CONFIG_BMIPS_BOOT_RAM) #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/boston.h b/include/configs/boston.h index b9a9965eec..4c7b173ea8 100644 --- a/include/configs/boston.h +++ b/include/configs/boston.h @@ -33,8 +33,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000) - #define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* diff --git a/include/configs/broadcom_bcm963158.h b/include/configs/broadcom_bcm963158.h index 238ae9c010..7e376f0dc7 100644 --- a/include/configs/broadcom_bcm963158.h +++ b/include/configs/broadcom_bcm963158.h @@ -26,7 +26,6 @@ /* U-Boot */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/broadcom_bcm968360bg.h b/include/configs/broadcom_bcm968360bg.h index 77690ff40f..12efc3362f 100644 --- a/include/configs/broadcom_bcm968360bg.h +++ b/include/configs/broadcom_bcm968360bg.h @@ -25,7 +25,6 @@ /* U-Boot */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/broadcom_bcm968580xref.h b/include/configs/broadcom_bcm968580xref.h index febe6c0a04..10b64df8ae 100644 --- a/include/configs/broadcom_bcm968580xref.h +++ b/include/configs/broadcom_bcm968580xref.h @@ -25,7 +25,6 @@ /* U-Boot */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SKIP_LOWLEVEL_INIT diff --git a/include/configs/brppt2.h b/include/configs/brppt2.h index e30b365a93..548c7dfd5c 100644 --- a/include/configs/brppt2.h +++ b/include/configs/brppt2.h @@ -20,8 +20,6 @@ #define CONFIG_BOARD_POSTCLK_INIT #define CONFIG_MXC_GPT_HCLK -#define CONFIG_SYS_LOAD_ADDR 0x10700000 - /* MMC */ #define CONFIG_FSL_USDHC diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index bf54cfb078..43c12ac462 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -49,11 +49,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #endif /* !CONFIG_SPL_BUILD, ... */ /* - * Our DDR memory always starts at 0x80000000 and U-Boot shall have - * relocated itself to higher in memory by the time this value is used. - */ -#define CONFIG_SYS_LOAD_ADDR 0x80000000 -/* * ---------------------------------------------------------------------------- * DDR information. We say (for simplicity) that we have 1 bank, * always, even when we have more. We always start at 0x80000000, diff --git a/include/configs/capricorn-common.h b/include/configs/capricorn-common.h index bca995e16c..4c76ef54b5 100644 --- a/include/configs/capricorn-common.h +++ b/include/configs/capricorn-common.h @@ -127,7 +127,6 @@ "reset;" /* Default location for tftp and bootm */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 /* On CCP board, USDHC1 is for eMMC */ diff --git a/include/configs/cgtqmx8.h b/include/configs/cgtqmx8.h index 585834c902..55b6186f88 100644 --- a/include/configs/cgtqmx8.h +++ b/include/configs/cgtqmx8.h @@ -147,7 +147,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/ci20.h b/include/configs/ci20.h index 8f9e9f8132..09d227ae48 100644 --- a/include/configs/ci20.h +++ b/include/configs/ci20.h @@ -23,7 +23,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* cached (KSEG0) address */ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index c859616c68..054b659abf 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -135,9 +135,6 @@ enter a valid image address in flash */ #endif -#define CONFIG_SYS_LOAD_ADDR 0x20000 /*Defines default RAM address -from which user programs will be started */ - /*---*/ /* diff --git a/include/configs/colibri-imx8x.h b/include/configs/colibri-imx8x.h index 27edb90153..8ad70dddc2 100644 --- a/include/configs/colibri-imx8x.h +++ b/include/configs/colibri-imx8x.h @@ -102,7 +102,6 @@ "vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index ca3709b940..966aa47d73 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -60,8 +60,6 @@ #undef CONFIG_SERVERIP #define CONFIG_SERVERIP 192.168.10.1 -#define CONFIG_SYS_LOAD_ADDR 0x12000000 - #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 1) \ diff --git a/include/configs/colibri_pxa270.h b/include/configs/colibri_pxa270.h index 46ddec6868..eeb35ea4be 100644 --- a/include/configs/colibri_pxa270.h +++ b/include/configs/colibri_pxa270.h @@ -82,7 +82,6 @@ #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ #define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */ -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR 0x5c010000 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 96fef9fd7f..e3dcbf8f37 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -38,7 +38,6 @@ #define CONFIG_NETMASK 255.255.255.0 #define CONFIG_SERVERIP 192.168.10.1 -#define CONFIG_SYS_LOAD_ADDR 0x80008000 #define CONFIG_FDTADDR 0x84000000 /* We boot from the gfxRAM area of the OCRAM. */ diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 19190029da..b0add5c6f0 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -468,7 +468,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/corvus.h b/include/configs/corvus.h index bd4d6e8e39..164ca4b142 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -83,8 +83,6 @@ /* DFU class support */ #define DFU_MANIFEST_POLL_TIMEOUT 25000 -#define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6 - /* bootstrap + u-boot + env in nandflash */ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 883cbc95d2..e9761f2adc 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -173,7 +173,6 @@ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) /* * Linux Information diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h index ab1fbc83af..5377683feb 100644 --- a/include/configs/devkit3250.h +++ b/include/configs/devkit3250.h @@ -25,8 +25,6 @@ #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_64M -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h index 8e4296b9d3..ca6dc8e8b3 100644 --- a/include/configs/dh_imx6.h +++ b/include/configs/dh_imx6.h @@ -81,8 +81,6 @@ #define CONFIG_HW_WATCHDOG #endif -#define CONFIG_SYS_LOAD_ADDR 0x12000000 - #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc0,115200\0" \ diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h index 6474e57b29..86ea072953 100644 --- a/include/configs/dragonboard410c.h +++ b/include/configs/dragonboard410c.h @@ -20,7 +20,6 @@ #define PHYS_SDRAM_1_SIZE SZ_1G #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) #define CONFIG_SYS_BOOTM_LEN SZ_64M /* UART */ diff --git a/include/configs/dragonboard820c.h b/include/configs/dragonboard820c.h index 4256e6f060..10252fd714 100644 --- a/include/configs/dragonboard820c.h +++ b/include/configs/dragonboard820c.h @@ -21,7 +21,6 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) #define CONFIG_SYS_BOOTM_LEN SZ_64M /* Generic Timer Definitions */ diff --git a/include/configs/durian.h b/include/configs/durian.h index fa48e5c024..65cdccd6b1 100644 --- a/include/configs/durian.h +++ b/include/configs/durian.h @@ -13,8 +13,6 @@ #define PHYS_SDRAM_1_SIZE 0x7B000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000000) - /* Size of Malloc Pool */ #define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024 + CONFIG_ENV_SIZE) diff --git a/include/configs/ea-lpc3250devkitv2.h b/include/configs/ea-lpc3250devkitv2.h index c1a37c8a79..33ffb7496c 100644 --- a/include/configs/ea-lpc3250devkitv2.h +++ b/include/configs/ea-lpc3250devkitv2.h @@ -26,7 +26,6 @@ /* * cmd */ -#define CONFIG_SYS_LOAD_ADDR 0x80100000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE) /* diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index c324881ed3..e4da694834 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -47,8 +47,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x20000 - /*#define CONFIG_SYS_DRAM_TEST 1 */ #undef CONFIG_SYS_DRAM_TEST diff --git a/include/configs/edison.h b/include/configs/edison.h index 0e1205bdb5..3ec35db4bc 100644 --- a/include/configs/edison.h +++ b/include/configs/edison.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Memory */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 #define CONFIG_PHYSMEM #define CONFIG_SYS_STACK_SIZE (32 * 1024) diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index fffad6ee11..6bb4a87a84 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -169,7 +169,6 @@ * Other required minimal configurations */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Enable command line editing */ diff --git a/include/configs/emsdp.h b/include/configs/emsdp.h index 8685f6c270..2f60e1ff6a 100644 --- a/include/configs/emsdp.h +++ b/include/configs/emsdp.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_1M) #define CONFIG_SYS_MALLOC_LEN SZ_64K -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* * Environment diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index dc01de74e3..9c430be415 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -34,7 +34,6 @@ /* 128MB SDRAM in 1 bank */ #define CONFIG_SYS_SDRAM_BASE 0x20000000 #define CONFIG_SYS_SDRAM_SIZE (128 << 20) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) /* 512kB on-chip NOR flash */ diff --git a/include/configs/evb_ast2500.h b/include/configs/evb_ast2500.h index 0ff01af833..dc032c1a41 100644 --- a/include/configs/evb_ast2500.h +++ b/include/configs/evb_ast2500.h @@ -13,7 +13,4 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* Memory Info */ -#define CONFIG_SYS_LOAD_ADDR 0x83000000 - #endif /* __CONFIG_H */ diff --git a/include/configs/evb_ast2600.h b/include/configs/evb_ast2600.h index e7975bf66d..177a52eb91 100644 --- a/include/configs/evb_ast2600.h +++ b/include/configs/evb_ast2600.h @@ -10,7 +10,4 @@ #define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -/* Memory Info */ -#define CONFIG_SYS_LOAD_ADDR 0x83000000 - #endif /* __CONFIG_H */ diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h index 784ddd191b..e492396416 100644 --- a/include/configs/exynos5-common.h +++ b/include/configs/exynos5-common.h @@ -45,12 +45,6 @@ /* MMC SPL */ #define COPY_BL2_FNPTR_ADDR 0x02020030 -/* specific .lds file */ - -/* Boot Argument Buffer Size */ -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - #define CONFIG_RD_LVL #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/exynos7420-common.h b/include/configs/exynos7420-common.h index 6c0aa9bcd4..a36b48fb0f 100644 --- a/include/configs/exynos7420-common.h +++ b/include/configs/exynos7420-common.h @@ -42,8 +42,6 @@ /* select serial console configuration */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE #define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) diff --git a/include/configs/flea3.h b/include/configs/flea3.h index 6caeff2a1c..7287a779bc 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -49,8 +49,6 @@ #define CONFIG_NET_RETRY_COUNT 100 -#define CONFIG_SYS_LOAD_ADDR 0x80800000 /* loadaddr env var */ - /* * Ethernet on SOC (FEC) */ diff --git a/include/configs/gardena-smart-gateway-at91sam.h b/include/configs/gardena-smart-gateway-at91sam.h index 007cbb043a..4968ae9de0 100644 --- a/include/configs/gardena-smart-gateway-at91sam.h +++ b/include/configs/gardena-smart-gateway-at91sam.h @@ -45,8 +45,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* SPL */ #define CONFIG_SPL_MAX_SIZE 0x7000 #define CONFIG_SPL_STACK 0x308000 diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index 1b26466eda..bdbd2f99a0 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -12,8 +12,6 @@ /* RAM */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000 - #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h index 4bf0c60aab..4291298561 100644 --- a/include/configs/gazerbeam.h +++ b/include/configs/gazerbeam.h @@ -60,7 +60,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h index ba0432f434..0c2db29313 100644 --- a/include/configs/ge_bx50v3.h +++ b/include/configs/ge_bx50v3.h @@ -114,10 +114,6 @@ #define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND #endif - -/* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x12000000 - /* Physical Memory Map */ #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR diff --git a/include/configs/grpeach.h b/include/configs/grpeach.h index 4d5eab09f0..c958006b22 100644 --- a/include/configs/grpeach.h +++ b/include/configs/grpeach.h @@ -20,8 +20,6 @@ #define CONFIG_SYS_SDRAM_SIZE (10 * 1024 * 1024) #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR \ - (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024) /* Malloc */ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) diff --git a/include/configs/highbank.h b/include/configs/highbank.h index ff92c4f554..05cf485d6c 100644 --- a/include/configs/highbank.h +++ b/include/configs/highbank.h @@ -36,7 +36,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x800000 #define CONFIG_SYS_64BIT_LBA /* Environment data setup diff --git a/include/configs/hikey.h b/include/configs/hikey.h index 45b01463ac..194e79ddd3 100644 --- a/include/configs/hikey.h +++ b/include/configs/hikey.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 19000000 diff --git a/include/configs/hikey960.h b/include/configs/hikey960.h index 04d458798a..38c03e14ef 100644 --- a/include/configs/hikey960.h +++ b/include/configs/hikey960.h @@ -24,8 +24,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000) - /* Generic Timer Definitions */ #define COUNTER_FREQUENCY 19000000 diff --git a/include/configs/hsdk-4xd.h b/include/configs/hsdk-4xd.h index 8eb3bb9b72..9d99d8d638 100644 --- a/include/configs/hsdk-4xd.h +++ b/include/configs/hsdk-4xd.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_MALLOC_LEN SZ_2M #define CONFIG_SYS_BOOTM_LEN SZ_128M -#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* * UART configuration diff --git a/include/configs/hsdk.h b/include/configs/hsdk.h index 06577dffb4..20d2b85ce4 100644 --- a/include/configs/hsdk.h +++ b/include/configs/hsdk.h @@ -30,7 +30,6 @@ #define CONFIG_SYS_MALLOC_LEN SZ_2M #define CONFIG_SYS_BOOTM_LEN SZ_128M -#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* * UART configuration diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index be37b50cbf..48c642b72f 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -235,7 +235,6 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x100000 #define CONFIG_LOADS_ECHO #define CONFIG_TIMESTAMP #define CONFIG_BOOTCOMMAND "run boot_cramfs" diff --git a/include/configs/imgtec_xilfpga.h b/include/configs/imgtec_xilfpga.h index fcf1b7f990..ebfbcab465 100644 --- a/include/configs/imgtec_xilfpga.h +++ b/include/configs/imgtec_xilfpga.h @@ -31,7 +31,6 @@ #define CONFIG_SYS_MALLOC_LEN (256 << 10) #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_LOAD_ADDR 0x80500000 /* default load address */ /*---------------------------------------------------------------------- * Commands diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index c63e2d5a53..c531971326 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -120,8 +120,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* loadaddr env var */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ "nfsargs=setenv bootargs root=/dev/nfs rw " \ diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h index c994d717f5..dac3077eaf 100644 --- a/include/configs/imx8mm-cl-iot-gate.h +++ b/include/configs/imx8mm-cl-iot-gate.h @@ -140,7 +140,6 @@ #endif /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h index 7423e28384..2131a01c42 100644 --- a/include/configs/imx8mm_beacon.h +++ b/include/configs/imx8mm_beacon.h @@ -93,7 +93,6 @@ "fi;" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 diff --git a/include/configs/imx8mm_evk.h b/include/configs/imx8mm_evk.h index 6aa7c2a5b9..117c98916f 100644 --- a/include/configs/imx8mm_evk.h +++ b/include/configs/imx8mm_evk.h @@ -57,7 +57,6 @@ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 diff --git a/include/configs/imx8mm_icore_mx8mm.h b/include/configs/imx8mm_icore_mx8mm.h index 9d63b8c4f1..cceb932d22 100644 --- a/include/configs/imx8mm_icore_mx8mm.h +++ b/include/configs/imx8mm_icore_mx8mm.h @@ -56,7 +56,6 @@ BOOTENV /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_2M diff --git a/include/configs/imx8mm_venice.h b/include/configs/imx8mm_venice.h index ed3307166e..010705e0f8 100644 --- a/include/configs/imx8mm_venice.h +++ b/include/configs/imx8mm_venice.h @@ -37,7 +37,6 @@ "scriptaddr=0x46000000\0" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 /* Enable Distro Boot */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/imx8mn_beacon.h b/include/configs/imx8mn_beacon.h index 0975e786dc..187cf8c617 100644 --- a/include/configs/imx8mn_beacon.h +++ b/include/configs/imx8mn_beacon.h @@ -108,7 +108,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index feb96b41b3..2be4750f5f 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -56,7 +56,6 @@ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x200000 diff --git a/include/configs/imx8mp_evk.h b/include/configs/imx8mp_evk.h index 32c50cd066..742e66c4ac 100644 --- a/include/configs/imx8mp_evk.h +++ b/include/configs/imx8mp_evk.h @@ -79,7 +79,6 @@ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/imx8mq_cm.h b/include/configs/imx8mq_cm.h index a3267c47ae..2f7db8e1cb 100644 --- a/include/configs/imx8mq_cm.h +++ b/include/configs/imx8mq_cm.h @@ -65,7 +65,6 @@ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h index fc86ba3dcc..2f302ad2ce 100644 --- a/include/configs/imx8mq_evk.h +++ b/include/configs/imx8mq_evk.h @@ -94,7 +94,6 @@ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/imx8mq_phanbell.h b/include/configs/imx8mq_phanbell.h index d246115b32..13e75d5730 100644 --- a/include/configs/imx8mq_phanbell.h +++ b/include/configs/imx8mq_phanbell.h @@ -137,7 +137,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/imx8qm_mek.h b/include/configs/imx8qm_mek.h index 04ad3db8ed..d37c1263a7 100644 --- a/include/configs/imx8qm_mek.h +++ b/include/configs/imx8qm_mek.h @@ -145,7 +145,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/imx8qm_rom7720.h b/include/configs/imx8qm_rom7720.h index 9c7bf4be53..6810f50f96 100644 --- a/include/configs/imx8qm_rom7720.h +++ b/include/configs/imx8qm_rom7720.h @@ -122,7 +122,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/imx8qxp_mek.h b/include/configs/imx8qxp_mek.h index bab8021a55..e632aed086 100644 --- a/include/configs/imx8qxp_mek.h +++ b/include/configs/imx8qxp_mek.h @@ -144,7 +144,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80280000 #define CONFIG_SYS_INIT_SP_ADDR 0x80200000 diff --git a/include/configs/imx8ulp_evk.h b/include/configs/imx8ulp_evk.h index 154ae693c5..17fd429124 100644 --- a/include/configs/imx8ulp_evk.h +++ b/include/configs/imx8ulp_evk.h @@ -76,7 +76,6 @@ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x80480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/imxrt1020-evk.h b/include/configs/imxrt1020-evk.h index a2b1ab10d9..bd5b013fb8 100644 --- a/include/configs/imxrt1020-evk.h +++ b/include/configs/imxrt1020-evk.h @@ -11,12 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20240000 -#ifdef CONFIG_SUPPORT_SPL -#define CONFIG_SYS_LOAD_ADDR 0x20209000 -#else -#define CONFIG_SYS_LOAD_ADDR 0x80000000 -#endif - #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h index c4787ab318..2c6433c4ab 100644 --- a/include/configs/imxrt1050-evk.h +++ b/include/configs/imxrt1050-evk.h @@ -11,12 +11,6 @@ #define CONFIG_SYS_INIT_SP_ADDR 0x20280000 -#ifdef CONFIG_SUPPORT_SPL -#define CONFIG_SYS_LOAD_ADDR 0x20209000 -#else -#define CONFIG_SYS_LOAD_ADDR 0x80000000 -#endif - #define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1 diff --git a/include/configs/integrator-common.h b/include/configs/integrator-common.h index 89ab0da50c..80fcdac100 100644 --- a/include/configs/integrator-common.h +++ b/include/configs/integrator-common.h @@ -7,7 +7,6 @@ */ #define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */ -#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ diff --git a/include/configs/iot_devkit.h b/include/configs/iot_devkit.h index 93abae02fc..48a229c9f4 100644 --- a/include/configs/iot_devkit.h +++ b/include/configs/iot_devkit.h @@ -59,7 +59,6 @@ #define CONFIG_SYS_MALLOC_LEN SZ_64K #define CONFIG_SYS_BOOTM_LEN SZ_128K -#define CONFIG_SYS_LOAD_ADDR SRAM_BASE #define ROM_BASE CONFIG_SYS_MONITOR_BASE #define ROM_SIZE SZ_256K diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 95969a0f8f..bccf5e831e 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -12,8 +12,6 @@ /* EEprom support 24C08, 24C16, 24C64 */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - /* Reserve 4 MB for malloc */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index 7dff0f4bf3..f5e67d830a 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -40,8 +40,6 @@ #include "asm/arch/config.h" -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ - /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ "bootcountaddr=${bootcountaddr} ${mtdparts}" \ diff --git a/include/configs/km/pg-wcom-ls102xa.h b/include/configs/km/pg-wcom-ls102xa.h index 973718a984..f95ae2c1d7 100644 --- a/include/configs/km/pg-wcom-ls102xa.h +++ b/include/configs/km/pg-wcom-ls102xa.h @@ -214,8 +214,6 @@ * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - #define CONFIG_LS102XA_STREAM_ID #define CONFIG_SYS_INIT_SP_OFFSET \ diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h index 50ce4f0ce5..b221fdd622 100644 --- a/include/configs/kmcent2.h +++ b/include/configs/kmcent2.h @@ -185,8 +185,6 @@ #define SPD_EEPROM_ADDRESS 0x54 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - /****************************************************************************** * (PRAM usage) * ... ------------------------------------------------------- diff --git a/include/configs/kontron_sl28.h b/include/configs/kontron_sl28.h index 48e791b0ff..21f8e41600 100644 --- a/include/configs/kontron_sl28.h +++ b/include/configs/kontron_sl28.h @@ -68,7 +68,6 @@ /* environment */ /* see include/configs/ti_armv7_common.h */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 #define ENV_MEM_LAYOUT_SETTINGS \ "loadaddr=0x82000000\0" \ "kernel_addr_r=0x82000000\0" \ diff --git a/include/configs/kp_imx53.h b/include/configs/kp_imx53.h index 6973007568..5d24a0523a 100644 --- a/include/configs/kp_imx53.h +++ b/include/configs/kp_imx53.h @@ -20,7 +20,6 @@ #define CONFIG_MXC_USB_FLAGS 0 /* Command definition */ -#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* loadaddr env var */ #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1,115200\0" \ diff --git a/include/configs/kp_imx6q_tpc.h b/include/configs/kp_imx6q_tpc.h index 91023f44a5..ce81a66dc4 100644 --- a/include/configs/kp_imx6q_tpc.h +++ b/include/configs/kp_imx6q_tpc.h @@ -36,7 +36,6 @@ #define CONFIG_MXC_USB_FLAGS 0 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */ #endif -#define CONFIG_SYS_LOAD_ADDR 0x12000000 #ifndef CONFIG_SPL_BUILD #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h index 6bade5e440..e447f527a5 100644 --- a/include/configs/kzm9g.h +++ b/include/configs/kzm9g.h @@ -46,7 +46,6 @@ #define CONFIG_SDRAM_OFFSET_FOR_RT (16 * 1024 * 1024) #define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT) #define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) #define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE) #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) diff --git a/include/configs/legoev3.h b/include/configs/legoev3.h index 5de81c0a42..39c0c38f2d 100644 --- a/include/configs/legoev3.h +++ b/include/configs/legoev3.h @@ -56,7 +56,6 @@ #define CONFIG_BOOTFILE "uImage" /* Boot file name */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) /* * Linux Information diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index e7a7ae3198..0324d66a67 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -12,8 +12,6 @@ /* RAM */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000 - #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 498b86f30a..c28424417b 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -19,7 +19,6 @@ #else #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) #endif -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0 diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index e2a70d29c3..0653fd576e 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -180,8 +180,6 @@ */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - #define CONFIG_LS102XA_STREAM_ID #define CONFIG_SYS_INIT_SP_OFFSET \ diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 608e91d120..6c5aa401d2 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -440,8 +440,6 @@ unsigned long get_board_sys_clk(void); */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - #define CONFIG_LS102XA_STREAM_ID #define CONFIG_SYS_INIT_SP_OFFSET \ diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 490e86f648..20b67b02b1 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -206,8 +206,6 @@ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - #define CONFIG_LS102XA_STREAM_ID #define CONFIG_SYS_INIT_SP_OFFSET \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 56f30ff4b3..70897c2c1c 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -415,8 +415,6 @@ */ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - #define CONFIG_LS102XA_STREAM_ID #define CONFIG_SYS_INIT_SP_OFFSET \ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 48754747a9..e413ebacfd 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -53,7 +53,6 @@ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) /* Physical Memory Map */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index 82275e4cf2..9b7089e978 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -206,7 +206,6 @@ #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 72422eac69..039c9a4205 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -183,7 +183,6 @@ #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) #define CONFIG_HWCONFIG #define HWCONFIG_BUFFER_SIZE 128 diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 638fc49dca..409c398bb4 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -144,7 +144,6 @@ unsigned long long get_qixis_addr(void); #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) /* SATA */ #ifdef CONFIG_SCSI diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index ec9905f753..92fed88f0c 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -153,7 +153,6 @@ unsigned long long get_qixis_addr(void); #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) /* Physical Memory Map */ /* fixme: these need to be checked against the board */ diff --git a/include/configs/lx2160a_common.h b/include/configs/lx2160a_common.h index a701b2ce62..6bc28b5468 100644 --- a/include/configs/lx2160a_common.h +++ b/include/configs/lx2160a_common.h @@ -45,7 +45,6 @@ #define CONFIG_SYS_MONITOR_LEN (936 * 1024) /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) /* SMP Definitinos */ #define CPU_RELEASE_ADDR secondary_boot_addr diff --git a/include/configs/m53menlo.h b/include/configs/m53menlo.h index 1bcd40dd20..3e053fd620 100644 --- a/include/configs/m53menlo.h +++ b/include/configs/m53menlo.h @@ -136,7 +136,6 @@ #define CONFIG_REVISION_TAG #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_BOOTFILE "boot/fitImage" -#define CONFIG_SYS_LOAD_ADDR 0x70800000 #define CONFIG_BOOTCOMMAND "run mmc_mmc" /* diff --git a/include/configs/malta.h b/include/configs/malta.h index 9602773ff9..5f89f73be2 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -38,8 +38,6 @@ #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x01000000) - #define CONFIG_SYS_MALLOC_LEN (128 * 1024) #define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024) #define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024) diff --git a/include/configs/meesc.h b/include/configs/meesc.h index bd4bac7aab..beeb9a7543 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -58,8 +58,6 @@ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000) - /* * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, * leaving the correct space for initial global data structure above diff --git a/include/configs/meson64.h b/include/configs/meson64.h index f9bb0240d2..865055aa31 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -39,7 +39,6 @@ #define CONFIG_SYS_SDRAM_BASE 0 #define CONFIG_SYS_INIT_SP_ADDR 0x20000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */ /* ROM USB boot support, auto-execute boot.scr at scriptaddr */ diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 59b20cf116..6d25b900ae 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -55,8 +55,6 @@ #define CONFIG_SYS_CBSIZE 512 /* max number of command args */ #define CONFIG_SYS_MAXARGS 15 -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0 #define CONFIG_HOSTNAME "microblaze-generic" diff --git a/include/configs/microchip_mpfs_icicle.h b/include/configs/microchip_mpfs_icicle.h index 24990370cf..c3274bd3e8 100644 --- a/include/configs/microchip_mpfs_icicle.h +++ b/include/configs/microchip_mpfs_icicle.h @@ -12,8 +12,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) - #define CONFIG_SYS_MALLOC_LEN SZ_8M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mt7620.h b/include/configs/mt7620.h index 4d074a3688..d600cd48ff 100644 --- a/include/configs/mt7620.h +++ b/include/configs/mt7620.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x80010000 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 diff --git a/include/configs/mt7622.h b/include/configs/mt7622.h index 9820d6ac58..3bddbe7bcb 100644 --- a/include/configs/mt7622.h +++ b/include/configs/mt7622.h @@ -27,9 +27,6 @@ #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ GENERATED_GBL_DATA_SIZE) -/* UBoot -> Kernel */ -#define CONFIG_SYS_LOAD_ADDR 0x4007ff28 - /* DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt7623.h b/include/configs/mt7623.h index 6ceb9af264..7037543414 100644 --- a/include/configs/mt7623.h +++ b/include/configs/mt7623.h @@ -32,9 +32,6 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \ GENERATED_GBL_DATA_SIZE) -/* UBoot -> Kernel */ -#define CONFIG_SYS_LOAD_ADDR 0x84000000 - /* MMC */ #define MMC_SUPPORTS_TUNING diff --git a/include/configs/mt7628.h b/include/configs/mt7628.h index c6752f4acb..b52d4797f7 100644 --- a/include/configs/mt7628.h +++ b/include/configs/mt7628.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR 0x80010000 #define CONFIG_SYS_INIT_SP_OFFSET 0x80000 diff --git a/include/configs/mt7629.h b/include/configs/mt7629.h index 53f2c3ad36..17efbd8fdc 100644 --- a/include/configs/mt7629.h +++ b/include/configs/mt7629.h @@ -43,7 +43,6 @@ /* UBoot -> Kernel */ #define CONFIG_SYS_SPL_ARGS_ADDR 0x40000000 -#define CONFIG_SYS_LOAD_ADDR 0x42007f1c /* DRAM */ #define CONFIG_SYS_SDRAM_BASE 0x40000000 diff --git a/include/configs/mt8183.h b/include/configs/mt8183.h index 8e7afbb48a..cb11096c26 100644 --- a/include/configs/mt8183.h +++ b/include/configs/mt8183.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN SZ_4M #define CONFIG_CPU_ARMV8 diff --git a/include/configs/mt8512.h b/include/configs/mt8512.h index 8d667d0730..66a88f51ca 100644 --- a/include/configs/mt8512.h +++ b/include/configs/mt8512.h @@ -17,8 +17,6 @@ #define COUNTER_FREQUENCY 13000000 -#define CONFIG_SYS_LOAD_ADDR 0x41000000 - #define CONFIG_SYS_MALLOC_LEN SZ_32M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mt8516.h b/include/configs/mt8516.h index a1c5d8174b..320c18f835 100644 --- a/include/configs/mt8516.h +++ b/include/configs/mt8516.h @@ -11,7 +11,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN SZ_4M #define CONFIG_CPU_ARMV8 diff --git a/include/configs/mt8518.h b/include/configs/mt8518.h index a3005460e5..f5aa0909fa 100644 --- a/include/configs/mt8518.h +++ b/include/configs/mt8518.h @@ -21,8 +21,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define CONFIG_SYS_SDRAM_SIZE 0x20000000 -#define CONFIG_SYS_LOAD_ADDR 0x41000000 - #define CONFIG_SYS_MALLOC_LEN SZ_32M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index d61c90a431..acd99208b0 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -60,7 +60,6 @@ /* * Other required minimal configurations */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ diff --git a/include/configs/mvebu_armada-37xx.h b/include/configs/mvebu_armada-37xx.h index 46d0569270..31dc58d659 100644 --- a/include/configs/mvebu_armada-37xx.h +++ b/include/configs/mvebu_armada-37xx.h @@ -44,7 +44,6 @@ /* * Other required minimal configurations */ -#define CONFIG_SYS_LOAD_ADDR 0x06000000 /* default load adr */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ diff --git a/include/configs/mvebu_armada-8k.h b/include/configs/mvebu_armada-8k.h index 493e3de9b9..dcb48c090c 100644 --- a/include/configs/mvebu_armada-8k.h +++ b/include/configs/mvebu_armada-8k.h @@ -38,7 +38,6 @@ /* * Other required minimal configurations */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index ba24cd1e66..0314f349c0 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -27,7 +27,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/mx23evk.h b/include/configs/mx23evk.h index ad0e4abafb..d82dbc1df2 100644 --- a/include/configs/mx23evk.h +++ b/include/configs/mx23evk.h @@ -36,7 +36,6 @@ /* Boot Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* Extra Environments */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 5d51ff1af9..f5f1ab0854 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -50,7 +50,6 @@ /* Boot Linux */ #define CONFIG_BOOTFILE "uImage" -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* Extra Environment */ #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 38609cf049..25761fb4f1 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -61,8 +61,6 @@ #define CONFIG_ETHPRIME "FEC0" -#define CONFIG_SYS_LOAD_ADDR 0x92000000 /* loadaddr env var */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index 2e9958bca6..570131fe71 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -43,8 +43,6 @@ /* Command definition */ -#define CONFIG_SYS_LOAD_ADDR 0x70010000 /* loadaddr env var */ - #define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index deb928f91d..5f121da50c 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -49,8 +49,6 @@ #define CONFIG_ETHPRIME "FEC0" -#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* loadaddr env var */ - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h index ca62d0ff15..6e51e96616 100644 --- a/include/configs/mx53ppd.h +++ b/include/configs/mx53ppd.h @@ -33,8 +33,6 @@ /* Command definition */ -#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* loadaddr env var */ - #define PPD_CONFIG_NFS \ "nfsserver=192.168.252.95\0" \ "gatewayip=192.168.252.95\0" \ diff --git a/include/configs/mx6_common.h b/include/configs/mx6_common.h index ac212aea3b..71ffcc236b 100644 --- a/include/configs/mx6_common.h +++ b/include/configs/mx6_common.h @@ -39,15 +39,6 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG -/* Boot options */ -#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \ - defined(CONFIG_MX6SX) || \ - defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL) -#define CONFIG_SYS_LOAD_ADDR 0x82000000 -#else -#define CONFIG_SYS_LOAD_ADDR 0x12000000 -#endif - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 8af1338880..eb50f5df31 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -28,8 +28,6 @@ /* Enable iomux-lpsr support */ #define CONFIG_IOMUX_LPSR -#define CONFIG_SYS_LOAD_ADDR 0x80800000 - /* Miscellaneous configurable options */ #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MAXARGS 32 diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 6c19997793..52a88ad82b 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -47,8 +47,6 @@ #define PHYS_SDRAM 0x60000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_LOAD_ADDR 0x60800000 - #define CONFIG_EXTRA_ENV_SETTINGS \ "image=zImage\0" \ "console=ttyLP0\0" \ diff --git a/include/configs/mx7ulp_evk.h b/include/configs/mx7ulp_evk.h index ae0e6a0bbb..e7d776a72c 100644 --- a/include/configs/mx7ulp_evk.h +++ b/include/configs/mx7ulp_evk.h @@ -47,8 +47,6 @@ #define PHYS_SDRAM_SIZE SZ_1G #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM -#define CONFIG_SYS_LOAD_ADDR 0x60800000 - #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "image=zImage\0" \ diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h index 7ef25ea838..67395b4711 100644 --- a/include/configs/nokia_rx51.h +++ b/include/configs/nokia_rx51.h @@ -188,9 +188,6 @@ int rx51_kp_getc(struct stdio_dev *sdev); "run attachboot;" \ "echo" -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) - /* * OMAP3 has 12 GP timers, they can be driven by the system clock * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). diff --git a/include/configs/nsim.h b/include/configs/nsim.h index 69d582594e..5bd097a902 100644 --- a/include/configs/nsim.h +++ b/include/configs/nsim.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_MALLOC_LEN SZ_2M #define CONFIG_SYS_BOOTM_LEN SZ_32M -#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* * Environment configuration diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index 495753ba11..3584d9ad90 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -26,9 +26,6 @@ /* SPI */ #define CONFIG_SPI_FLASH_SIZE (4 << 20) -#undef CONFIG_SYS_LOAD_ADDR -#define CONFIG_SYS_LOAD_ADDR 0x82408000 - #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/octeon_common.h b/include/configs/octeon_common.h index 109ef4064d..80bbbceedb 100644 --- a/include/configs/octeon_common.h +++ b/include/configs/octeon_common.h @@ -19,8 +19,6 @@ #define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + (1 << 20)) - #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #endif /* __OCTEON_COMMON_H__ */ diff --git a/include/configs/octeontx2_common.h b/include/configs/octeontx2_common.h index 280089617f..99a1b4d4cf 100644 --- a/include/configs/octeontx2_common.h +++ b/include/configs/octeontx2_common.h @@ -21,8 +21,6 @@ /** Heap size for U-Boot */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - #define CONFIG_LAST_STAGE_INIT /* Allow environment variable to be overwritten */ diff --git a/include/configs/octeontx_common.h b/include/configs/octeontx_common.h index 0e4a17684f..4822fd5753 100644 --- a/include/configs/octeontx_common.h +++ b/include/configs/octeontx_common.h @@ -46,8 +46,6 @@ /** Heap size for U-Boot */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024) -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - /* Allow environment variable to be overwritten */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 1367d13891..384885aa5e 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -28,9 +28,6 @@ #define CONFIG_SYS_MEM_TOP_HIDE (1UL << 20UL) #define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - #include <linux/sizes.h> #define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot" diff --git a/include/configs/omapl138_lcdk.h b/include/configs/omapl138_lcdk.h index a37359e6c3..f68f7bd125 100644 --- a/include/configs/omapl138_lcdk.h +++ b/include/configs/omapl138_lcdk.h @@ -161,7 +161,6 @@ #define CONFIG_BOOTFILE "zImage" /* Boot file name */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) /* * USB Configs diff --git a/include/configs/openpiton-riscv64.h b/include/configs/openpiton-riscv64.h index 42c64f3ca5..47a3a96a0a 100644 --- a/include/configs/openpiton-riscv64.h +++ b/include/configs/openpiton-riscv64.h @@ -16,7 +16,6 @@ /* Environment options */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32M) -#define CONFIG_SYS_LOAD_ADDR 0x87000000 #define CONFIG_SYS_MALLOC_LEN SZ_256M #define CONFIG_SYS_BOOTM_LEN SZ_256M diff --git a/include/configs/origen.h b/include/configs/origen.h index 8a0e145c76..d63de28bfe 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -19,9 +19,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - #define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ diff --git a/include/configs/owl-common.h b/include/configs/owl-common.h index 4ef9e8ed5d..d79033be3f 100644 --- a/include/configs/owl-common.h +++ b/include/configs/owl-common.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024) /* Some commands use this as the default load address */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7ffc0) /* * This is the initial SP which is used only briefly for relocating the u-boot diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 7ac71aa9a2..dda71b3b7c 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -589,7 +589,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/pcm052.h b/include/configs/pcm052.h index 0b21c590cf..327ab37791 100644 --- a/include/configs/pcm052.h +++ b/include/configs/pcm052.h @@ -25,8 +25,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - /* We boot from the gfxRAM area of the OCRAM. */ #define CONFIG_BOARD_SIZE_LIMIT 520192 diff --git a/include/configs/phycore_imx8mm.h b/include/configs/phycore_imx8mm.h index add7835528..99e62a56f8 100644 --- a/include/configs/phycore_imx8mm.h +++ b/include/configs/phycore_imx8mm.h @@ -82,7 +82,6 @@ "fi;" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K diff --git a/include/configs/phycore_imx8mp.h b/include/configs/phycore_imx8mp.h index d0338fad05..f3191e8eac 100644 --- a/include/configs/phycore_imx8mp.h +++ b/include/configs/phycore_imx8mp.h @@ -82,7 +82,6 @@ "fi;" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE SZ_512K diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index d50edc7715..a06ac83a2c 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -34,7 +34,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */ #define CONFIG_SYS_ENV_ADDR 0x88300000 #define CONFIG_SYS_FDT_ADDR 0x89d00000 diff --git a/include/configs/pico-imx8mq.h b/include/configs/pico-imx8mq.h index e802644fdc..935651d6c2 100644 --- a/include/configs/pico-imx8mq.h +++ b/include/configs/pico-imx8mq.h @@ -116,7 +116,6 @@ "else booti ${loadaddr} - ${fdt_addr}; fi" /* Link Definitions */ -#define CONFIG_SYS_LOAD_ADDR 0x40480000 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x80000 diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 382d19a241..cf2ea3a0e5 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -182,8 +182,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - #undef CONFIG_SYS_USE_DATAFLASH_CS0 #undef CONFIG_SYS_USE_NANDFLASH #define CONFIG_SYS_USE_FLASH 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index e825270de8..f31cf78f24 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -213,8 +213,6 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263" #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #define CONFIG_SYS_USE_FLASH 1 #undef CONFIG_SYS_USE_DATAFLASH #undef CONFIG_SYS_USE_NANDFLASH diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h index 452fbda066..9168dd021a 100644 --- a/include/configs/pm9g45.h +++ b/include/configs/pm9g45.h @@ -57,8 +57,6 @@ #define CONFIG_RESET_PHY_R #define CONFIG_AT91_WANTS_COMMON_PHY -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_NAND_BOOT /* bootstrap + u-boot + env in nandflash */ diff --git a/include/configs/poplar.h b/include/configs/poplar.h index 9763218ecb..5db5fc46c6 100644 --- a/include/configs/poplar.h +++ b/include/configs/poplar.h @@ -18,7 +18,6 @@ /* SYS */ #define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_SYS_INIT_SP_ADDR 0x200000 -#define CONFIG_SYS_LOAD_ADDR 0x800000 #define CONFIG_SYS_MALLOC_LEN SZ_32M /* ATF bl33.bin load address (must match) */ diff --git a/include/configs/presidio_asic.h b/include/configs/presidio_asic.h index 646a496084..692c566c44 100644 --- a/include/configs/presidio_asic.h +++ b/include/configs/presidio_asic.h @@ -47,7 +47,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (DDR_BASE + 0x10000000) #define CONFIG_LAST_STAGE_INIT /* SDRAM Bank #1 */ diff --git a/include/configs/px30_common.h b/include/configs/px30_common.h index 76d6ab1c8b..42fd1bf762 100644 --- a/include/configs/px30_common.h +++ b/include/configs/px30_common.h @@ -20,7 +20,6 @@ #define CONFIG_IRAM_BASE 0xff020000 #define CONFIG_SYS_INIT_SP_ADDR 0x00400000 -#define CONFIG_SYS_LOAD_ADDR 0x00800800 #define CONFIG_SPL_STACK 0x00400000 #define CONFIG_SPL_MAX_SIZE 0x20000 #define CONFIG_SPL_BSS_START_ADDR 0x4000000 diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h index 273fa1a7d7..2fdbeafe49 100644 --- a/include/configs/qemu-arm.h +++ b/include/configs/qemu-arm.h @@ -14,7 +14,6 @@ /* The DTB generated by QEMU is placed at start of RAM, stay away from there */ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) #define CONFIG_SYS_MALLOC_LEN SZ_16M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 5159ff375a..d96d18133d 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -85,7 +85,6 @@ extern unsigned long long get_phys_ccsrbar_addr_early(void); /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/qemu-riscv.h b/include/configs/qemu-riscv.h index bbeea96e27..af53bab835 100644 --- a/include/configs/qemu-riscv.h +++ b/include/configs/qemu-riscv.h @@ -21,8 +21,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) - #define CONFIG_SYS_MALLOC_LEN SZ_8M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index 61b6fb4846..c36dc4c4a1 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -15,7 +15,6 @@ #define CONFIG_SYS_PBSIZE 256 -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) /* Address of u-boot image in Flash */ #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_MONITOR_LEN (256 * 1024) diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index 2aaeeae5f8..2dedcb052d 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -28,7 +28,6 @@ #define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE) #define CONFIG_SYS_SDRAM_SIZE (RCAR_GEN2_UBOOT_SDRAM_SIZE) -#define CONFIG_SYS_LOAD_ADDR 0x50000000 #define CONFIG_SYS_MONITOR_BASE 0x00000000 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) diff --git a/include/configs/rcar-gen3-common.h b/include/configs/rcar-gen3-common.h index f234455f84..559b4ee3ac 100644 --- a/include/configs/rcar-gen3-common.h +++ b/include/configs/rcar-gen3-common.h @@ -44,7 +44,6 @@ #define DRAM_RSV_SIZE 0x08000000 #define CONFIG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE) #define CONFIG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE) -#define CONFIG_SYS_LOAD_ADDR 0x58000000 #define CONFIG_VERY_BIG_RAM #define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE) diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index 7f148eff87..9af9978fe7 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -17,7 +17,6 @@ #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 -#define CONFIG_SYS_LOAD_ADDR 0x60800800 #define CONFIG_SPL_STACK 0x10081fff #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10) diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 7c064a0704..6b0ed40122 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -20,7 +20,6 @@ #define CONFIG_IRAM_BASE 0x10080000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 -#define CONFIG_SYS_LOAD_ADDR 0x60800800 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ diff --git a/include/configs/rk3188_common.h b/include/configs/rk3188_common.h index 3bcc04808a..b567943056 100644 --- a/include/configs/rk3188_common.h +++ b/include/configs/rk3188_common.h @@ -18,7 +18,6 @@ /* Bootrom will load u-boot binary to 0x60000000 once return from SPL */ #endif #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 -#define CONFIG_SYS_LOAD_ADDR 0x60800800 #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (0x8000 - 0x800) #define CONFIG_ROCKCHIP_CHIP_TAG "RK31" diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index 7e0c831174..cdc4eec7f2 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -18,7 +18,6 @@ #define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x61100000 -#define CONFIG_SYS_LOAD_ADDR 0x61800800 #define CONFIG_SPL_MAX_SIZE 0x100000 #define CONFIG_ROCKCHIP_MAX_INIT_SIZE (28 << 10) diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index addad7a16d..0f43347cc7 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -23,7 +23,6 @@ /* Bootrom will load u-boot binary to 0x0 once return from SPL */ #endif #define CONFIG_SYS_INIT_SP_ADDR 0x00100000 -#define CONFIG_SYS_LOAD_ADDR 0x00800800 #define CONFIG_SPL_STACK 0xff718000 #define CONFIG_IRAM_BASE 0xff700000 diff --git a/include/configs/rk3308_common.h b/include/configs/rk3308_common.h index bd9ac826f3..3edbb34ff3 100644 --- a/include/configs/rk3308_common.h +++ b/include/configs/rk3308_common.h @@ -25,7 +25,6 @@ #define CONFIG_ROCKCHIP_STIMER_BASE 0xff1b00a0 #define CONFIG_IRAM_BASE 0xfff80000 #define CONFIG_SYS_INIT_SP_ADDR 0x00800000 -#define CONFIG_SYS_LOAD_ADDR 0x00C00800 #define CONFIG_SPL_STACK 0x00400000 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ diff --git a/include/configs/rk3328_common.h b/include/configs/rk3328_common.h index 0538da751f..fe58ee2cc9 100644 --- a/include/configs/rk3328_common.h +++ b/include/configs/rk3328_common.h @@ -17,7 +17,6 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 -#define CONFIG_SYS_LOAD_ADDR 0x00800800 #define CONFIG_SPL_STACK 0x00400000 #define CONFIG_SPL_MAX_SIZE 0x40000 #define CONFIG_SPL_BSS_START_ADDR 0x2000000 diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index fbbb8cf267..43471b94e4 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -24,7 +24,6 @@ #define CONFIG_IRAM_BASE 0xff8c0000 #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 -#define CONFIG_SYS_LOAD_ADDR 0x00800800 #define CONFIG_SPL_MAX_SIZE 0x40000 #define CONFIG_SPL_BSS_START_ADDR 0x400000 diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 6d710da901..a17f181369 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -17,7 +17,6 @@ #define CONFIG_IRAM_BASE 0xff8c0000 #define CONFIG_SYS_INIT_SP_ADDR 0x00300000 -#define CONFIG_SYS_LOAD_ADDR 0x00800800 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT) #define CONFIG_SPL_STACK 0x00400000 diff --git a/include/configs/rk3568_common.h b/include/configs/rk3568_common.h index b6568917ea..72f31a012f 100644 --- a/include/configs/rk3568_common.h +++ b/include/configs/rk3568_common.h @@ -17,7 +17,6 @@ #define CONFIG_IRAM_BASE 0xfdcc0000 #define CONFIG_SYS_INIT_SP_ADDR 0x00c00000 -#define CONFIG_SYS_LOAD_ADDR 0x00c00800 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ #define CONFIG_SYS_SDRAM_BASE 0 diff --git a/include/configs/rpi.h b/include/configs/rpi.h index b6d5d49490..c11930a05b 100644 --- a/include/configs/rpi.h +++ b/include/configs/rpi.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* Environment */ -#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* Shell */ diff --git a/include/configs/rv1108_common.h b/include/configs/rv1108_common.h index 758e85e89d..86f9077759 100644 --- a/include/configs/rv1108_common.h +++ b/include/configs/rv1108_common.h @@ -20,7 +20,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x60000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x100000) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x2000000) /* rockchip ohci host driver */ #define CONFIG_USB_OHCI_NEW diff --git a/include/configs/s5p4418_nanopi2.h b/include/configs/s5p4418_nanopi2.h index 1e2180b970..1cacf34068 100644 --- a/include/configs/s5p4418_nanopi2.h +++ b/include/configs/s5p4418_nanopi2.h @@ -65,7 +65,6 @@ #define BMP_LOAD_ADDR 0x78000000 /* kernel load address */ -#define CONFIG_SYS_LOAD_ADDR 0x71080000 #define INITRD_START 0x79000000 #define KERNEL_DTB_ADDR 0x7A000000 diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 6af6009e61..fef5e702e6 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -138,8 +138,6 @@ "dfu_alt_info=" CONFIG_DFU_ALT "\0" #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000) /* Goni has 3 banks of DRAM, but swap the bank */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */ diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 8ee667e693..ff29de0d06 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -31,9 +31,6 @@ #define CONFIG_SYS_MONITOR_BASE 0x00000000 -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */ #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT diff --git a/include/configs/sam9x60ek.h b/include/configs/sam9x60ek.h index 6a6f1de41d..0f372c69cc 100644 --- a/include/configs/sam9x60ek.h +++ b/include/configs/sam9x60ek.h @@ -54,8 +54,6 @@ #define CONFIG_SYS_NAND_ONFI_DETECTION #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env + linux in sd card */ #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/sama5d27_som1_ek.h b/include/configs/sama5d27_som1_ek.h index 8942d15934..89d8486ff8 100644 --- a/include/configs/sama5d27_som1_ek.h +++ b/include/configs/sama5d27_som1_ek.h @@ -25,8 +25,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* bootstrap + u-boot + env in sd card */ diff --git a/include/configs/sama5d27_wlsom1_ek.h b/include/configs/sama5d27_wlsom1_ek.h index 8bea764582..09ebf48860 100644 --- a/include/configs/sama5d27_wlsom1_ek.h +++ b/include/configs/sama5d27_wlsom1_ek.h @@ -26,8 +26,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* SPL */ #define CONFIG_SPL_TEXT_BASE 0x200000 #define CONFIG_SPL_MAX_SIZE 0x10000 diff --git a/include/configs/sama5d2_icp.h b/include/configs/sama5d2_icp.h index 9be6d4f338..e7ccfeaef7 100644 --- a/include/configs/sama5d2_icp.h +++ b/include/configs/sama5d2_icp.h @@ -27,8 +27,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* NAND flash */ /* SPI flash */ diff --git a/include/configs/sama5d2_ptc_ek.h b/include/configs/sama5d2_ptc_ek.h index f42e26a0e0..1001bbcf93 100644 --- a/include/configs/sama5d2_ptc_ek.h +++ b/include/configs/sama5d2_ptc_ek.h @@ -22,8 +22,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* NAND Flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h index 4f5ceca780..5c69b6b7bc 100644 --- a/include/configs/sama5d2_xplained.h +++ b/include/configs/sama5d2_xplained.h @@ -22,8 +22,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* SerialFlash */ #ifdef CONFIG_SD_BOOT diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 4c25964b43..20d1d34044 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -56,8 +56,6 @@ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* SPL */ #define CONFIG_SPL_MAX_SIZE 0x18000 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 44c1952b51..ac52e27217 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -69,8 +69,6 @@ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3 #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* SPL */ #define CONFIG_SPL_MAX_SIZE 0x18000 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 80809df638..3032297731 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -22,8 +22,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 2fb4764f7c..4e8fe8693c 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -22,8 +22,6 @@ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* NAND flash */ #ifdef CONFIG_CMD_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/sama7g5ek.h b/include/configs/sama7g5ek.h index 96db82e9d4..191138cda0 100644 --- a/include/configs/sama7g5ek.h +++ b/include/configs/sama7g5ek.h @@ -24,8 +24,6 @@ GENERATED_GBL_DATA_SIZE) #endif -#define CONFIG_SYS_LOAD_ADDR 0x62000000 /* load address */ - #undef CONFIG_BOOTCOMMAND #ifdef CONFIG_SD_BOOT /* u-boot env in sd/mmc card */ diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 8eeccdd426..ebebe2b930 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -38,8 +38,6 @@ #define CONFIG_I2C_EDID -/* Memory things - we don't really want a memory test */ -#define CONFIG_SYS_LOAD_ADDR 0x00000000 #define CONFIG_SYS_FDT_LOAD_ADDR 0x100 #define CONFIG_PHYSMEM diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 9cf3c67536..20cf4f99b6 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -53,8 +53,6 @@ * start addr of ram disk */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */ - /* Physical Memory Map */ #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */ diff --git a/include/configs/sifive-unleashed.h b/include/configs/sifive-unleashed.h index b6c29f8c60..4d456cef3c 100644 --- a/include/configs/sifive-unleashed.h +++ b/include/configs/sifive-unleashed.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) - #define CONFIG_SYS_MALLOC_LEN SZ_8M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/sifive-unmatched.h b/include/configs/sifive-unmatched.h index 15e1588311..4b655ec8ee 100644 --- a/include/configs/sifive-unmatched.h +++ b/include/configs/sifive-unmatched.h @@ -28,8 +28,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M) - #define CONFIG_SYS_MALLOC_LEN SZ_8M #define CONFIG_SYS_BOOTM_LEN SZ_64M diff --git a/include/configs/sipeed-maix.h b/include/configs/sipeed-maix.h index 0fbe8a5905..5b12878552 100644 --- a/include/configs/sipeed-maix.h +++ b/include/configs/sipeed-maix.h @@ -8,7 +8,6 @@ #include <linux/sizes.h> -#define CONFIG_SYS_LOAD_ADDR 0x80000000 /* Start just below the second bank so we don't clobber it during reloc */ #define CONFIG_SYS_INIT_SP_ADDR 0x803FFFFF #define CONFIG_SYS_MALLOC_LEN SZ_128K diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index 009a11cd88..f880dd1621 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -130,12 +130,6 @@ #define CONFIG_SYS_CBSIZE 512 /* - * RAM Memory address where to put the - * Linux Kernel befor starting. - */ -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - -/* * The NAND Flash partitions: */ #define CONFIG_ENV_RANGE (SZ_512K) diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 77773cdeaa..b400386403 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -105,8 +105,6 @@ * Miscellaneous configurable options */ #define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */ diff --git a/include/configs/smdkv310.h b/include/configs/smdkv310.h index fc2f6ecf6b..900a2dcd98 100644 --- a/include/configs/smdkv310.h +++ b/include/configs/smdkv310.h @@ -33,9 +33,6 @@ #define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) - /* SMDKV310 has 4 bank of DRAM */ #define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h index 7f2c8056cc..b97c5abc34 100644 --- a/include/configs/snapper9260.h +++ b/include/configs/snapper9260.h @@ -96,7 +96,6 @@ #define I2C_DELAY udelay(2) /* Boot options */ -#define CONFIG_SYS_LOAD_ADDR 0x23000000 #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/snapper9g45.h b/include/configs/snapper9g45.h index 077e9d667a..1a43d3ce82 100644 --- a/include/configs/snapper9g45.h +++ b/include/configs/snapper9g45.h @@ -64,7 +64,6 @@ /* UARTs/Serial console */ /* Boot options */ -#define CONFIG_SYS_LOAD_ADDR 0x23000000 #define CONFIG_BOOTP_BOOTFILESIZE diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 25e0735022..75d44c0a2b 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -114,8 +114,6 @@ * Boot */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - #define CONFIG_BOOTCOMMAND \ "setenv boot_mmc_part ${kernel_mmc_part}; " \ "if test reboot-${reboot-mode} = reboot-r; then " \ diff --git a/include/configs/socfpga_arria10_socdk.h b/include/configs/socfpga_arria10_socdk.h index b0cd79eeb4..ebb3e8c573 100644 --- a/include/configs/socfpga_arria10_socdk.h +++ b/include/configs/socfpga_arria10_socdk.h @@ -8,9 +8,6 @@ #include <asm/arch/base_addr_a10.h> -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* * U-Boot general configurations */ diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h index c066eb3c1e..73317afc31 100644 --- a/include/configs/socfpga_arria5_secu1.h +++ b/include/configs/socfpga_arria5_secu1.h @@ -57,8 +57,6 @@ #define CONFIG_BOOT_RETRY_TIME 45 #define CONFIG_RESET_TO_RETRY -#define CONFIG_SYS_LOAD_ADDR CONFIG_KM_KERNEL_ADDR - /* * FPGA Remote Update related environment * diff --git a/include/configs/socfpga_arria5_socdk.h b/include/configs/socfpga_arria5_socdk.h index 8d62d1307e..ca2d782744 100644 --- a/include/configs/socfpga_arria5_socdk.h +++ b/include/configs/socfpga_arria5_socdk.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_cyclone5_socdk.h b/include/configs/socfpga_cyclone5_socdk.h index 72ba0c52e9..c23ba2325b 100644 --- a/include/configs/socfpga_cyclone5_socdk.h +++ b/include/configs/socfpga_cyclone5_socdk.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_dbm_soc1.h b/include/configs/socfpga_dbm_soc1.h index 1cd97cc863..137da2f1fc 100644 --- a/include/configs/socfpga_dbm_soc1.h +++ b/include/configs/socfpga_dbm_soc1.h @@ -13,7 +13,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTCOMMAND "run mmc_mmc" -#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Environment is in MMC */ diff --git a/include/configs/socfpga_de0_nano_soc.h b/include/configs/socfpga_de0_nano_soc.h index 36ddd41d86..a5e6511b51 100644 --- a/include/configs/socfpga_de0_nano_soc.h +++ b/include/configs/socfpga_de0_nano_soc.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_de10_nano.h b/include/configs/socfpga_de10_nano.h index c200bf960d..dfc22cf6e2 100644 --- a/include/configs/socfpga_de10_nano.h +++ b/include/configs/socfpga_de10_nano.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_de1_soc.h b/include/configs/socfpga_de1_soc.h index 5373b55481..4b58bc48c4 100644 --- a/include/configs/socfpga_de1_soc.h +++ b/include/configs/socfpga_de1_soc.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_is1.h b/include/configs/socfpga_is1.h index c3cbac3027..06337d405c 100644 --- a/include/configs/socfpga_is1.h +++ b/include/configs/socfpga_is1.h @@ -13,7 +13,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "zImage" -#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Ethernet on SoC (EMAC) */ #if defined(CONFIG_CMD_NET) diff --git a/include/configs/socfpga_mcvevk.h b/include/configs/socfpga_mcvevk.h index 2c77341e45..1456214325 100644 --- a/include/configs/socfpga_mcvevk.h +++ b/include/configs/socfpga_mcvevk.h @@ -13,7 +13,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTCOMMAND "run mmc_mmc" -#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Environment is in MMC */ diff --git a/include/configs/socfpga_soc64_common.h b/include/configs/socfpga_soc64_common.h index 2e9be25d8b..387ad129b3 100644 --- a/include/configs/socfpga_soc64_common.h +++ b/include/configs/socfpga_soc64_common.h @@ -15,7 +15,6 @@ * U-Boot general configurations */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_LOAD_ADDR 0x2000000 #define CONFIG_REMAKE_ELF /* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */ #define CPU_RELEASE_ADDR 0xFFD12210 diff --git a/include/configs/socfpga_sockit.h b/include/configs/socfpga_sockit.h index b66d2e52b5..a4aece9542 100644 --- a/include/configs/socfpga_sockit.h +++ b/include/configs/socfpga_sockit.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_socrates.h b/include/configs/socfpga_socrates.h index 22977a0f1e..f482005ce3 100644 --- a/include/configs/socfpga_socrates.h +++ b/include/configs/socfpga_socrates.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCrates */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* The rest of the configuration is shared */ #include <configs/socfpga_common.h> diff --git a/include/configs/socfpga_sr1500.h b/include/configs/socfpga_sr1500.h index ea406b4c82..62c1bc7408 100644 --- a/include/configs/socfpga_sr1500.h +++ b/include/configs/socfpga_sr1500.h @@ -10,9 +10,6 @@ /* Memory configurations */ #define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */ -/* Booting Linux */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 - /* Ethernet on SoC (EMAC) */ #define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII /* The PHY is autodetected, so no MII PHY address is needed here */ diff --git a/include/configs/socfpga_vining_fpga.h b/include/configs/socfpga_vining_fpga.h index 1679982621..c4a3df25d5 100644 --- a/include/configs/socfpga_vining_fpga.h +++ b/include/configs/socfpga_vining_fpga.h @@ -14,7 +14,6 @@ #define CONFIG_BOOTFILE "fitImage" #define CONFIG_BOOTCOMMAND "run selboot" #define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 /* Ethernet on SoC (EMAC) */ diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 373709f12a..38da633d91 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -196,7 +196,6 @@ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ /* * For booting Linux, the board info and command line data diff --git a/include/configs/stemmy.h b/include/configs/stemmy.h index b94ef91c2b..43cfe51719 100644 --- a/include/configs/stemmy.h +++ b/include/configs/stemmy.h @@ -15,7 +15,6 @@ */ #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MALLOC_LEN SZ_2M diff --git a/include/configs/stih410-b2260.h b/include/configs/stih410-b2260.h index 83fa1a4e5b..68690074dc 100644 --- a/include/configs/stih410-b2260.h +++ b/include/configs/stih410-b2260.h @@ -13,7 +13,6 @@ #define PHYS_SDRAM_1 0x40000000 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define PHYS_SDRAM_1_SIZE 0x3E000000 -#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 /* default load addr */ #define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */ diff --git a/include/configs/stm32f429-discovery.h b/include/configs/stm32f429-discovery.h index 64d22cdafc..fdc9a5a4b4 100644 --- a/include/configs/stm32f429-discovery.h +++ b/include/configs/stm32f429-discovery.h @@ -14,7 +14,6 @@ /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_LOAD_ADDR 0x90400000 #define CONFIG_SYS_MAX_FLASH_SECT 12 #define CONFIG_SYS_MAX_FLASH_BANKS 2 diff --git a/include/configs/stm32f429-evaluation.h b/include/configs/stm32f429-evaluation.h index 45686febfd..4bb0a98531 100644 --- a/include/configs/stm32f429-evaluation.h +++ b/include/configs/stm32f429-evaluation.h @@ -19,7 +19,6 @@ /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_LOAD_ADDR 0x00400000 #define CONFIG_SYS_MAX_FLASH_SECT 12 #define CONFIG_SYS_MAX_FLASH_BANKS 2 diff --git a/include/configs/stm32f469-discovery.h b/include/configs/stm32f469-discovery.h index 6a0199e79d..a069308fc2 100644 --- a/include/configs/stm32f469-discovery.h +++ b/include/configs/stm32f469-discovery.h @@ -19,7 +19,6 @@ /* * Configuration of the external SDRAM memory */ -#define CONFIG_SYS_LOAD_ADDR 0x00400000 #define CONFIG_SYS_MAX_FLASH_SECT 12 #define CONFIG_SYS_MAX_FLASH_BANKS 2 diff --git a/include/configs/stm32f746-disco.h b/include/configs/stm32f746-disco.h index b28e371e68..6b527b8f03 100644 --- a/include/configs/stm32f746-disco.h +++ b/include/configs/stm32f746-disco.h @@ -15,12 +15,6 @@ #define CONFIG_SYS_FLASH_BASE 0x08000000 #define CONFIG_SYS_INIT_SP_ADDR 0x20050000 -#ifdef CONFIG_SUPPORT_SPL -#define CONFIG_SYS_LOAD_ADDR 0x08008000 -#else -#define CONFIG_SYS_LOAD_ADDR 0xC0400000 -#endif - /* * Configuration of the external SDRAM memory */ diff --git a/include/configs/stm32h743-disco.h b/include/configs/stm32h743-disco.h index 28a4c4da9f..6fe2ac4156 100644 --- a/include/configs/stm32h743-disco.h +++ b/include/configs/stm32h743-disco.h @@ -16,11 +16,6 @@ #define CONFIG_SYS_FLASH_BASE 0x08000000 #define CONFIG_SYS_INIT_SP_ADDR 0x24040000 -/* - * Configuration of the external SDRAM memory - */ -#define CONFIG_SYS_LOAD_ADDR 0xD0400000 - #define CONFIG_SYS_HZ_CLOCK 1000000 #define CONFIG_CMDLINE_TAG diff --git a/include/configs/stm32h743-eval.h b/include/configs/stm32h743-eval.h index 57aba24723..94fa4e7ba9 100644 --- a/include/configs/stm32h743-eval.h +++ b/include/configs/stm32h743-eval.h @@ -16,11 +16,6 @@ #define CONFIG_SYS_FLASH_BASE 0x08000000 #define CONFIG_SYS_INIT_SP_ADDR 0x24040000 -/* - * Configuration of the external SDRAM memory - */ -#define CONFIG_SYS_LOAD_ADDR 0xD0400000 - #define CONFIG_SYS_HZ_CLOCK 1000000 #define CONFIG_CMDLINE_TAG diff --git a/include/configs/stm32h750-art-pi.h b/include/configs/stm32h750-art-pi.h index 1f84724ee4..eeb11a5e63 100644 --- a/include/configs/stm32h750-art-pi.h +++ b/include/configs/stm32h750-art-pi.h @@ -16,11 +16,6 @@ #define CONFIG_SYS_FLASH_BASE 0x90000000 #define CONFIG_SYS_INIT_SP_ADDR 0x24040000 -/* - * Configuration of the external SDRAM memory - */ -#define CONFIG_SYS_LOAD_ADDR 0xC1800000 - #define CONFIG_SYS_HZ_CLOCK 1000000 #define CONFIG_CMDLINE_TAG diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h index 10771ab2f3..1ac1cac8d3 100644 --- a/include/configs/stm32mp1.h +++ b/include/configs/stm32mp1.h @@ -27,11 +27,6 @@ */ #define CONFIG_SYS_CBSIZE SZ_1K -/* - * default load address used for command tftp, bootm , loadb, ... - */ -#define CONFIG_SYS_LOAD_ADDR 0xc2000000 - /* ATAGs */ #define CONFIG_CMDLINE_TAG #define CONFIG_SETUP_MEMORY_TAGS diff --git a/include/configs/stmark2.h b/include/configs/stmark2.h index da162cbb11..f6fa96a590 100644 --- a/include/configs/stmark2.h +++ b/include/configs/stmark2.h @@ -73,7 +73,6 @@ /* Boot Argument Buffer Size */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) #define CONFIG_SYS_MBAR 0xFC000000 /* diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h index 0058dcd4bb..250cdad2af 100644 --- a/include/configs/stv0991.h +++ b/include/configs/stv0991.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_CBSIZE 1024 /* MISC */ -#define CONFIG_SYS_LOAD_ADDR 0x00000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 #define CONFIG_SYS_INIT_RAM_ADDR 0x00190000 #define CONFIG_SYS_INIT_SP_OFFSET \ diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index eeada873fb..abf1234e0b 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -61,7 +61,6 @@ #ifdef CONFIG_MACH_SUN9I #define SDRAM_OFFSET(x) 0x2##x #define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */ /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here * since it needs to fit in with the other values. By also #defining it * we get warnings if the Kconfig value mismatches. */ @@ -70,7 +69,6 @@ #else #define SDRAM_OFFSET(x) 0x4##x #define CONFIG_SYS_SDRAM_BASE 0x40000000 -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */ /* V3s do not have enough memory to place code at 0x4a000000 */ /* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here * since it needs to fit in with the other values. By also #defining it diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h index 4503cf3f6d..9ce4d56e0f 100644 --- a/include/configs/synquacer.h +++ b/include/configs/synquacer.h @@ -25,7 +25,6 @@ */ #define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */ #define CONFIG_SYS_MALLOC_LEN (0x01000000) /* 16Mbyte size of malloc() */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default kernel load address */ /* * Hardware drivers support diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index e79fb91e4d..518f5dae48 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -75,10 +75,6 @@ #define CONFIG_SYS_MAXARGS 32 /* max number of command */ /* args */ -/* memtest works on */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ /* * AM3517 has 12 GP timers, they can be driven by the system clock diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 6e869462f1..5e55366542 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -102,9 +102,6 @@ /* SPL related */ #endif -/* load address */ -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - /* bootstrap in spi flash , u-boot + env + linux in nandflash */ #ifndef CONFIG_SPL_BUILD diff --git a/include/configs/tb100.h b/include/configs/tb100.h index d9a9f2a1fc..4be6e2dc76 100644 --- a/include/configs/tb100.h +++ b/include/configs/tb100.h @@ -22,7 +22,6 @@ #define CONFIG_SYS_MALLOC_LEN SZ_128K #define CONFIG_SYS_BOOTM_LEN SZ_32M -#define CONFIG_SYS_LOAD_ADDR 0x82000000 /* * UART configuration diff --git a/include/configs/tegra114-common.h b/include/configs/tegra114-common.h index c3418b6e4c..f714c52bb5 100644 --- a/include/configs/tegra114-common.h +++ b/include/configs/tegra114-common.h @@ -45,7 +45,6 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ diff --git a/include/configs/tegra124-common.h b/include/configs/tegra124-common.h index 4d2ea182e6..4a92954c9b 100644 --- a/include/configs/tegra124-common.h +++ b/include/configs/tegra124-common.h @@ -47,7 +47,6 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ diff --git a/include/configs/tegra186-common.h b/include/configs/tegra186-common.h index 59eb4fe703..968501602a 100644 --- a/include/configs/tegra186-common.h +++ b/include/configs/tegra186-common.h @@ -47,7 +47,6 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_SYS_LOAD_ADDR 0x80080000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index d61962a8af..e99e65fd2f 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -46,7 +46,6 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_SYS_LOAD_ADDR 0x01000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x10000000\0" \ "pxefile_addr_r=0x10100000\0" \ diff --git a/include/configs/tegra210-common.h b/include/configs/tegra210-common.h index 4f631001a2..b9e04147be 100644 --- a/include/configs/tegra210-common.h +++ b/include/configs/tegra210-common.h @@ -38,7 +38,6 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_SYS_LOAD_ADDR 0x80080000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ diff --git a/include/configs/tegra30-common.h b/include/configs/tegra30-common.h index 2beca3b166..0ee13a226d 100644 --- a/include/configs/tegra30-common.h +++ b/include/configs/tegra30-common.h @@ -42,7 +42,6 @@ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows * for the FDT/DTB to be up to 1M, which is hopefully plenty. */ -#define CONFIG_SYS_LOAD_ADDR 0x81000000 #define MEM_LAYOUT_ENV_SETTINGS \ "scriptaddr=0x90000000\0" \ "pxefile_addr_r=0x90100000\0" \ diff --git a/include/configs/thunderx_88xx.h b/include/configs/thunderx_88xx.h index 4d3c58d1e8..1692c6da06 100644 --- a/include/configs/thunderx_88xx.h +++ b/include/configs/thunderx_88xx.h @@ -42,7 +42,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (MEM_BASE) /* Physical Memory Map */ #define PHYS_SDRAM_1 (MEM_BASE) /* SDRAM Bank #1 */ diff --git a/include/configs/ti814x_evm.h b/include/configs/ti814x_evm.h index 67bcc0c218..ee619ae5b7 100644 --- a/include/configs/ti814x_evm.h +++ b/include/configs/ti814x_evm.h @@ -87,8 +87,6 @@ /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */ - /** * Physical Memory Map */ diff --git a/include/configs/ti_armv7_common.h b/include/configs/ti_armv7_common.h index 0b02324236..ddc82e4d7b 100644 --- a/include/configs/ti_armv7_common.h +++ b/include/configs/ti_armv7_common.h @@ -22,14 +22,6 @@ #define CONFIG_INITRD_TAG /* - * Our DDR memory always starts at 0x80000000 and U-Boot shall have - * relocated itself to higher in memory by the time this value is used. - * However, set this to a 32MB offset to allow for easier Linux kernel - * booting as the default is often used as the kernel load address. - */ -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - -/* * We setup defaults based on constraints from the Linux kernel, which should * also be safe elsewhere. We have the default load at 32MB into DDR (for * the kernel), FDT above 128MB (the maximum location for the end of the diff --git a/include/configs/total_compute.h b/include/configs/total_compute.h index 61ca866006..79b733ac4c 100644 --- a/include/configs/total_compute.h +++ b/include/configs/total_compute.h @@ -25,7 +25,6 @@ #define CONFIG_PL011_CLOCK 7372800 /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x90000000 /* Physical Memory Map */ #define PHYS_SDRAM_1 0x80000000 diff --git a/include/configs/tplink_wdr4300.h b/include/configs/tplink_wdr4300.h index 8ff57fb91b..a4b4550001 100644 --- a/include/configs/tplink_wdr4300.h +++ b/include/configs/tplink_wdr4300.h @@ -16,7 +16,6 @@ #define CONFIG_SYS_BOOTPARAMS_LEN 0x20000 #define CONFIG_SYS_SDRAM_BASE 0xa0000000 -#define CONFIG_SYS_LOAD_ADDR 0xa1000000 #define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000 #define CONFIG_SYS_INIT_RAM_SIZE 0x8000 diff --git a/include/configs/trats.h b/include/configs/trats.h index c3f891ae53..7284663f04 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -26,9 +26,6 @@ #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000) - #define CONFIG_MACH_TYPE MACH_TYPE_TRATS #define CONFIG_BOOTCOMMAND "run autoboot" diff --git a/include/configs/trats2.h b/include/configs/trats2.h index e5f2b0cc99..114dd8e56f 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -24,8 +24,6 @@ #define CONFIG_SYS_SDRAM_BASE 0x40000000 #define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE #define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */ -/* memtest works on */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) #define CONFIG_BOOTCOMMAND "run autoboot" diff --git a/include/configs/turris_mox.h b/include/configs/turris_mox.h index 6d6925cfab..875c192601 100644 --- a/include/configs/turris_mox.h +++ b/include/configs/turris_mox.h @@ -49,7 +49,6 @@ /* * Other required minimal configurations */ -#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h index a81fa9db01..42a5029da2 100644 --- a/include/configs/uniphier.h +++ b/include/configs/uniphier.h @@ -69,7 +69,6 @@ #define CONFIG_GATEWAYIP 192.168.11.1 #define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_SYS_LOAD_ADDR 0x85000000 #define CONFIG_SYS_BOOTM_LEN (32 << 20) #if defined(CONFIG_ARM64) diff --git a/include/configs/usb_a9263.h b/include/configs/usb_a9263.h index 73bf2d19da..7e0ba117cb 100644 --- a/include/configs/usb_a9263.h +++ b/include/configs/usb_a9263.h @@ -71,8 +71,6 @@ #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 #endif -#define CONFIG_SYS_LOAD_ADDR 0x22000000 - /* bootstrap + u-boot + env + linux in dataflash on CS0 */ #define CONFIG_BOOTCOMMAND "nboot 21000000 0" #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/configs/usbarmory.h b/include/configs/usbarmory.h index 381b5d6354..5acdfe29de 100644 --- a/include/configs/usbarmory.h +++ b/include/configs/usbarmory.h @@ -34,9 +34,6 @@ /* Fuse */ #define CONFIG_FSL_IIM -/* U-Boot memory offsets */ -#define CONFIG_SYS_LOAD_ADDR 0x72000000 - /* Linux boot */ #define CONFIG_HOSTNAME "usbarmory" #define CONFIG_BOOTCOMMAND \ diff --git a/include/configs/vcoreiii.h b/include/configs/vcoreiii.h index 82a8fa7354..6b5ca71128 100644 --- a/include/configs/vcoreiii.h +++ b/include/configs/vcoreiii.h @@ -11,7 +11,6 @@ /* Onboard devices */ #define CONFIG_SYS_MALLOC_LEN 0x1F0000 -#define CONFIG_SYS_LOAD_ADDR 0x00100000 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 #if defined(CONFIG_SOC_LUTON) || defined(CONFIG_SOC_SERVAL) diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index d395cf6377..6601cedd2b 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -37,8 +37,6 @@ "ramdisk_addr_r=0x46400000\0" \ "scriptaddr=0x46000000\0" -#define CONFIG_SYS_LOAD_ADDR 0x40480000 - /* Enable Distro Boot */ #ifndef CONFIG_SPL_BUILD #define BOOT_TARGET_DEVICES(func) \ diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 54b5967a89..6b7b69da99 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -105,7 +105,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000) /* Physical Memory Map */ #define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */ diff --git a/include/configs/vexpress_common.h b/include/configs/vexpress_common.h index 5d5ad923e5..4c2c6aa489 100644 --- a/include/configs/vexpress_common.h +++ b/include/configs/vexpress_common.h @@ -140,7 +140,6 @@ #define CONFIG_BOOTP_BOOTFILESIZE /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000) #define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000) /* Physical Memory Map */ diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h index ca3ae275c5..9c4b46f3c7 100644 --- a/include/configs/vf610twr.h +++ b/include/configs/vf610twr.h @@ -44,9 +44,6 @@ /* I2C Configs */ #define CONFIG_SYS_SPD_BUS_NUM 0 - -#define CONFIG_SYS_LOAD_ADDR 0x82000000 - /* We boot from the gfxRAM area of the OCRAM. */ #define CONFIG_BOARD_SIZE_LIMIT 520192 diff --git a/include/configs/vinco.h b/include/configs/vinco.h index 496c228b58..7397d3e8b3 100644 --- a/include/configs/vinco.h +++ b/include/configs/vinco.h @@ -30,8 +30,6 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ - /* SerialFlash */ #ifdef CONFIG_CMD_SF diff --git a/include/configs/vocore2.h b/include/configs/vocore2.h index dfdb8fcc04..3b4f826395 100644 --- a/include/configs/vocore2.h +++ b/include/configs/vocore2.h @@ -12,8 +12,6 @@ /* RAM */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000 - #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 /* SPL */ diff --git a/include/configs/work_92105.h b/include/configs/work_92105.h index e7472ed3ec..055a50b2ce 100644 --- a/include/configs/work_92105.h +++ b/include/configs/work_92105.h @@ -30,8 +30,6 @@ #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE #define CONFIG_SYS_SDRAM_SIZE SZ_128M -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) - #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ - GENERATED_GBL_DATA_SIZE) diff --git a/include/configs/x530.h b/include/configs/x530.h index 64d6827623..4481b1d55a 100644 --- a/include/configs/x530.h +++ b/include/configs/x530.h @@ -75,7 +75,6 @@ "fdt_high=0x10000000\0" \ "initrd_high=0x10000000\0" -#define CONFIG_SYS_LOAD_ADDR 0x1000000 #define CONFIG_UBI_PART user #define CONFIG_UBIFS_VOLUME user diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 826aa1d474..3f9e80e531 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -53,8 +53,6 @@ */ #define CONFIG_SYS_CBSIZE 512 -#define CONFIG_SYS_LOAD_ADDR 0x20000000 - /*----------------------------------------------------------------------- * CPU Features */ diff --git a/include/configs/xea.h b/include/configs/xea.h index 78ffcefd33..5081cc8691 100644 --- a/include/configs/xea.h +++ b/include/configs/xea.h @@ -43,7 +43,6 @@ /* Booting Linux */ #define CONFIG_BOOTFILE "uImage" #define CONFIG_BOOTCOMMAND "run ${bootpri} ; run ${bootsec}" -#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* Extra Environment */ #define CONFIG_HOSTNAME "xea" diff --git a/include/configs/xenguest_arm64.h b/include/configs/xenguest_arm64.h index d76ce13d14..380084f4ec 100644 --- a/include/configs/xenguest_arm64.h +++ b/include/configs/xenguest_arm64.h @@ -20,7 +20,6 @@ * This can be any arbitrary address as we are using PIE, but * please note, that CONFIG_SYS_TEXT_BASE must match the below. */ -#define CONFIG_SYS_LOAD_ADDR 0x40000000 #define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_LOAD_ADDR /* Size of malloc() pool */ diff --git a/include/configs/xilinx_versal.h b/include/configs/xilinx_versal.h index 62680ad238..43486457a4 100644 --- a/include/configs/xilinx_versal.h +++ b/include/configs/xilinx_versal.h @@ -36,7 +36,6 @@ #define CONFIG_BOOTP_MAY_FAIL /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* Monitor Command Prompt */ /* Console I/O Buffer Size */ diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index c62d751c13..6864a101b8 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -48,7 +48,6 @@ #endif /* Miscellaneous configurable options */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 #if defined(CONFIG_ZYNQMP_USB) #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/xilinx_zynqmp_r5.h b/include/configs/xilinx_zynqmp_r5.h index c0cd72e564..e382f4b473 100644 --- a/include/configs/xilinx_zynqmp_r5.h +++ b/include/configs/xilinx_zynqmp_r5.h @@ -17,7 +17,6 @@ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} /* Boot configuration */ -#define CONFIG_SYS_LOAD_ADDR 0 /* default? */ #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ diff --git a/include/configs/xtfpga.h b/include/configs/xtfpga.h index 516a6089f6..04d58a13ca 100644 --- a/include/configs/xtfpga.h +++ b/include/configs/xtfpga.h @@ -98,9 +98,6 @@ #define XTENSA_SYS_TEXT_ADDR \ (MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN) -/* Used by tftpboot; env var 'loadaddr' */ -#define CONFIG_SYS_LOAD_ADDR MEMADDR(0x02000000) - /*==============================*/ /* U-Boot general configuration */ /*==============================*/ diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 88a885463d..7d747d20de 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -80,8 +80,6 @@ * CFI FLASH driver setup */ -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE - /* * Size of malloc() pool diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 7859b77603..9b4c54b5e6 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -65,7 +65,6 @@ /* enable preboot to be loaded before CONFIG_BOOTDELAY */ /* Boot configuration */ -#define CONFIG_SYS_LOAD_ADDR 0 /* default? */ #ifdef CONFIG_SPL_BUILD #define BOOTENV |