diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/configs/synquacer.h | 109 |
1 files changed, 109 insertions, 0 deletions
diff --git a/include/configs/synquacer.h b/include/configs/synquacer.h new file mode 100644 index 0000000000..0dab4de1f1 --- /dev/null +++ b/include/configs/synquacer.h @@ -0,0 +1,109 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (C) 2016-2017 Socionext Inc. + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* Timers for fasp(TIMCLK) */ +#define CONFIG_SYS_HZ 1000 /* 1 msec */ +#define CONFIG_SYS_TIMERBASE 0x31080000 /* AP Timer 1 (ARM-SP804) */ + +/* + * SDRAM (for initialize) + */ +#define CONFIG_SYS_SDRAM_BASE (0x80000000) /* Start address of DDR3 */ +#define PHYS_SDRAM_SIZE (0x7c000000) /* Default size (2GB - Secure memory) */ + +#define CONFIG_VERY_BIG_RAM /* SynQuacer supports up to 64GB */ +#define CONFIG_MAX_MEM_MAPPED PHYS_SDRAM_SIZE + +#define SQ_DRAMINFO_BASE (0x2e00ffc0) /* DRAM info from TF-A */ + +/* + * Boot info + */ +#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */ +#define CONFIG_SYS_MALLOC_LEN (0x01000000) /* 16Mbyte size of malloc() */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default kernel load address */ + +/* + * Hardware drivers support + */ + +/* RTC */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 + +/* Serial (pl011) */ +#define UART_CLK (62500000) +#define CONFIG_SERIAL_MULTI +#define CONFIG_PL011_SERIAL +#define CONFIG_PL011_CLOCK UART_CLK +#define CONFIG_PL01x_PORTS {(void *)(0x2a400000)} + +#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ + +/* Support MTD */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_FLASH_BASE (0x08000000) +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} + +#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + (512 * 1024)) +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + PHYS_SDRAM_SIZE) + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600 } + +#define CONFIG_SYS_CBSIZE 1024 +#define CONFIG_SYS_MAXARGS 128 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Since U-Boot 64bit PCIe support is limited, disable 64bit MMIO support */ +/* #define CONFIG_SYS_PCI_64BIT 1 */ + +/* Distro boot settings */ +#ifndef CONFIG_SPL_BUILD +#ifdef CONFIG_CMD_USB +#define BOOT_TARGET_DEVICE_USB(func) func(USB, usb, 0) +#else +#define BOOT_TARGET_DEVICE_USB(func) +#endif + +#ifdef CONFIG_CMD_MMC +#define BOOT_TARGET_DEVICE_MMC(func) func(MMC, mmc, 0) +#else +#define BOOT_TARGET_DEVICE_MMC(func) +#endif + +#ifdef CONFIG_CMD_NVME +#define BOOT_TARGET_DEVICE_NVME(func) func(NVME, nvme, 0) +#else +#define BOOT_TARGET_DEVICE_NVME(func) +#endif + +#ifdef CONFIG_CMD_SCSI +#define BOOT_TARGET_DEVICE_SCSI(func) func(SCSI, scsi, 0) func(SCSI, scsi, 1) +#else +#define BOOT_TARGET_DEVICE_SCSI(func) +#endif + +#define BOOT_TARGET_DEVICES(func) \ + BOOT_TARGET_DEVICE_USB(func) \ + BOOT_TARGET_DEVICE_MMC(func) \ + BOOT_TARGET_DEVICE_SCSI(func) \ + BOOT_TARGET_DEVICE_NVME(func) \ + +#include <config_distro_bootcmd.h> +#else /* CONFIG_SPL_BUILD */ +#define BOOTENV +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_addr_r=0x9fe00000\0" \ + "kernel_addr_r=0x90000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "scriptaddr=0x88000000\0" \ + "pxefile_addr_r=0x88100000\0" \ + BOOTENV + +#endif /* __CONFIG_H */ |