diff options
Diffstat (limited to 'lib_i386/ic/sc520_asm.S')
| -rw-r--r-- | lib_i386/ic/sc520_asm.S | 530 |
1 files changed, 0 insertions, 530 deletions
diff --git a/lib_i386/ic/sc520_asm.S b/lib_i386/ic/sc520_asm.S deleted file mode 100644 index 72110c4a0a..0000000000 --- a/lib_i386/ic/sc520_asm.S +++ /dev/null @@ -1,530 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/* This file is largely based on code obtned from AMD. AMD's original - * copyright is included below - */ - -/* - * ============================================================================= - * - * Copyright 1999 Advanced Micro Devices, Inc. - * - * This software is the property of Advanced Micro Devices, Inc (AMD) which - * specifically grants the user the right to modify, use and distribute this - * software provided this COPYRIGHT NOTICE is not removed or altered. All - * other rights are reserved by AMD. - * - * THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY - * OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF - * THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. - * IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER - * (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS - * INTERRUPTION, LOSS OF INFORMAITON) ARISING OUT OF THE USE OF OR INABILITY - * TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF - * SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR - * LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE - * LIMITATION MAY NOT APPLY TO YOU. - * - * AMD does not assume any responsibility for any errors that may appear in - * the Materials nor any responsibility to support or update the Materials. - * AMD retains the right to make changes to its test specifications at any - * time, without notice. - * - * So that all may benefit from your experience, please report any problems - * or suggestions about this software back to AMD. Please include your name, - * company, telephone number, AMD product requiring support and question or - * problem encountered. - * - * Advanced Micro Devices, Inc. Worldwide support and contact - * Embedded Processor Division information available at: - * Systems Engineering epd.support@amd.com - * 5204 E. Ben White Blvd. -or- - * Austin, TX 78741 http://www.amd.com/html/support/techsup.html - * ============================================================================ - */ - - -/******************************************************************************* - * AUTHOR : Buddy Fey - Original. - ******************************************************************************* - */ - - -/******************************************************************************* - * FUNCTIONAL DESCRIPTION: - * This routine is called to autodetect the geometry of the DRAM. - * - * This routine is called to determine the number of column bits for the DRAM - * devices in this external bank. This routine assumes that the external bank - * has been configured for an 11-bit column and for 4 internal banks. This gives - * us the maximum address reach in memory. By writing a test value to the max - * address and locating where it aliases to, we can determine the number of valid - * column bits. - * - * This routine is called to determine the number of internal banks each DRAM - * device has. The external bank (under test) is configured for maximum reach - * with 11-bit columns and 4 internal banks. This routine will write to a max - * address (BA1 and BA0 = 1) and then read from an address with BA1=0 to see if - * that column is a "don't care". If BA1 does not affect write/read of data, - * then this device has only 2 internal banks. - * - * This routine is called to determine the ending address for this external - * bank of SDRAM. We write to a max address with a data value and then disable - * row address bits looking for "don't care" locations. Each "don't care" bit - * represents a dividing of the maximum density (128M) by 2. By dividing the - * maximum of 32 4M chunks in an external bank down by all the "don't care" bits - * determined during sizing, we set the proper density. - * - * WARNINGS. - * bp must be preserved because it is used for return linkage. - * - * EXIT - * nothing returned - but the memory subsystem is enabled - ******************************************************************************* - */ - -.section .text -.equ DRCCTL, 0x0fffef010 /* DRAM control register */ -.equ DRCTMCTL, 0x0fffef012 /* DRAM timing control register */ -.equ DRCCFG, 0x0fffef014 /* DRAM bank configuration register */ -.equ DRCBENDADR, 0x0fffef018 /* DRAM bank ending address register */ -.equ ECCCTL, 0x0fffef020 /* DRAM ECC control register */ -.equ DBCTL, 0x0fffef040 /* DRAM buffer control register */ - -.equ CACHELINESZ, 0x00000010 /* size of our cache line (read buffer) */ -.equ COL11_ADR, 0x0e001e00 /* 11 col addrs */ -.equ COL10_ADR, 0x0e000e00 /* 10 col addrs */ -.equ COL09_ADR, 0x0e000600 /* 9 col addrs */ -.equ COL08_ADR, 0x0e000200 /* 8 col addrs */ -.equ ROW14_ADR, 0x0f000000 /* 14 row addrs */ -.equ ROW13_ADR, 0x07000000 /* 13 row addrs */ -.equ ROW12_ADR, 0x03000000 /* 12 row addrs */ -.equ ROW11_ADR, 0x01000000 /* 11 row addrs/also bank switch */ -.equ ROW10_ADR, 0x00000000 /* 10 row addrs/also bank switch */ -.equ COL11_DATA, 0x0b0b0b0b /* 11 col addrs */ -.equ COL10_DATA, 0x0a0a0a0a /* 10 col data */ -.equ COL09_DATA, 0x09090909 /* 9 col data */ -.equ COL08_DATA, 0x08080808 /* 8 col data */ -.equ ROW14_DATA, 0x3f3f3f3f /* 14 row data (MASK) */ -.equ ROW13_DATA, 0x1f1f1f1f /* 13 row data (MASK) */ -.equ ROW12_DATA, 0x0f0f0f0f /* 12 row data (MASK) */ -.equ ROW11_DATA, 0x07070707 /* 11 row data/also bank switch (MASK) */ -.equ ROW10_DATA, 0xaaaaaaaa /* 10 row data/also bank switch (MASK) */ - - - /* - * initialize dram controller registers - */ -.globl mem_init -mem_init: - xorw %ax,%ax - movl $DBCTL, %edi -fs movb %al, (%edi) /* disable write buffer */ - - movl $ECCCTL, %edi -fs movb %al, (%edi) /* disable ECC */ - - movl $DRCTMCTL, %edi - movb $0x1E,%al /* Set SDRAM timing for slowest */ -fs movb %al, (%edi) - - /* - * setup loop to do 4 external banks starting with bank 3 - */ - movl $0xff000000,%eax /* enable last bank and setup */ - movl $DRCBENDADR, %edi /* ending address register */ -fs movl %eax, (%edi) - - movl $DRCCFG, %edi /* setup */ - movw $0xbbbb,%ax /* dram config register for */ -fs movw %ax, (%edi) - - /* - * issue a NOP to all DRAMs - */ - movl $DRCCTL, %edi /* setup DRAM control register with */ - movb $0x1,%al /* Disable refresh,disable write buffer */ -fs movb %al, (%edi) - movl $CACHELINESZ, %esi /* just a dummy address to write for */ -fs movw %ax, (%esi) - /* - * delay for 100 usec? 200? - * ******this is a cludge for now ************* - */ - movw $100,%cx -sizdelay: - loop sizdelay /* we need 100 usec here */ - /***********************************************/ - - /* - * issue all banks precharge - */ - movb $0x2,%al /* All banks precharge */ -fs movb %al, (%edi) -fs movw %ax, (%esi) - - /* - * issue 2 auto refreshes to all banks - */ - movb $0x4,%al /* Auto refresh cmd */ -fs movb %al, (%edi) - movw $2,%cx -refresh1: -fs movw %ax, (%esi) - loop refresh1 - - /* - * issue LOAD MODE REGISTER command - */ - movb $0x3,%al /* Load mode register cmd */ -fs movb %al, (%edi) -fs movw %ax, (%esi) - - /* - * issue 8 more auto refreshes to all banks - */ - movb $0x4,%al /* Auto refresh cmd */ -fs movb %al, (%edi) - movw $8,%cx -refresh2: -fs movw %ax, (%esi) - loop refresh2 - - /* - * set control register to NORMAL mode - */ - movb $0x0,%al /* Normal mode value */ -fs movb %al, (%edi) - - /* - * size dram starting with external bank 3 moving to external bank 0 - */ - movl $0x3,%ecx /* start with external bank 3 */ - -nextbank: - - /* - * write col 11 wrap adr - */ - movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ - movl $COL11_DATA, %eax /* pattern for max supported columns(11) */ -fs movl %eax, (%esi) /* write max col pattern at max col adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 10 wrap adr - */ - - movl $COL10_ADR, %esi /* set address to 10 col wrap address */ - movl $COL10_DATA, %eax /* pattern for 10 col wrap */ -fs movl %eax, (%esi) /* write 10 col pattern @ 10 col wrap adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 9 wrap adr - */ - movl $COL09_ADR, %esi /* set address to 9 col wrap address */ - movl $COL09_DATA, %eax /* pattern for 9 col wrap */ -fs movl %eax, (%esi) /* write 9 col pattern @ 9 col wrap adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write col 8 wrap adr - */ - movl $COL08_ADR, %esi /* set address to min(8) col wrap address */ - movl $COL08_DATA, %eax /* pattern for min (8) col wrap */ -fs movl %eax, (%esi) /* write min col pattern @ min col adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 14 wrap adr - */ - movl $ROW14_ADR, %esi /* set address to max row (14) wrap addr */ - movl $ROW14_DATA, %eax /* pattern for max supported rows(14) */ -fs movl %eax, (%esi) /* write max row pattern at max row adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 13 wrap adr - */ - movl $ROW13_ADR, %esi /* set address to 13 row wrap address */ - movl $ROW13_DATA, %eax /* pattern for 13 row wrap */ -fs movl %eax, (%esi) /* write 13 row pattern @ 13 row wrap adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 12 wrap adr - */ - movl $ROW12_ADR, %esi /* set address to 12 row wrap address */ - movl $ROW12_DATA, %eax /* pattern for 12 row wrap */ -fs movl %eax, (%esi) /* write 12 row pattern @ 12 row wrap adr */ -fs movl (%esi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 11 wrap adr - */ - movl $ROW11_ADR, %edi /* set address to 11 row wrap address */ - movl $ROW11_DATA, %eax /* pattern for 11 row wrap */ -fs movl %eax, (%edi) /* write 11 row pattern @ 11 row wrap adr */ -fs movl (%edi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * write row 10 wrap adr --- this write is really to determine number of banks - */ - movl $ROW10_ADR, %edi /* set address to 10 row wrap address */ - movl $ROW10_DATA, %eax /* pattern for 10 row wrap (AA) */ -fs movl %eax, (%edi) /* write 10 row pattern @ 10 row wrap adr */ -fs movl (%edi), %ebx /* optional read */ - cmpl %ebx,%eax /* to verify write */ - jnz bad_ram /* this ram is bad */ - /* - * read data @ row 12 wrap adr to determine * banks, - * and read data @ row 14 wrap adr to determine * rows. - * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM. - * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4 - * if data @ row 12 wrap == 11 or 12, we have 4 banks, - */ - xorw %di,%di /* value for 2 banks in DI */ -fs movl (%esi), %ebx /* read from 12 row wrap to check banks - * (esi is setup from the write to row 12 wrap) */ - cmpl %ebx,%eax /* check for AA pattern (eax holds the aa pattern) */ - jz only2 /* if pattern == AA, we only have 2 banks */ - - /* 4 banks */ - - movw $8,%di /* value for 4 banks in DI (BNK_CNT bit) */ - cmpl $ROW11_DATA, %ebx /* only other legitimate values are 11 */ - jz only2 - cmpl $ROW12_DATA, %ebx /* and 12 */ - jnz bad_ram /* its bad if not 11 or 12! */ - - /* fall through */ -only2: - /* - * validate row mask - */ - movl $ROW14_ADR, %esi /* set address back to max row wrap addr */ -fs movl (%esi), %eax /* read actual number of rows @ row14 adr */ - - cmpl $ROW11_DATA, %eax /* row must be greater than 11 pattern */ - jb bad_ram - - cmpl $ROW14_DATA, %eax /* and row must be less than 14 pattern */ - ja bad_ram - - cmpb %ah,%al /* verify all 4 bytes of dword same */ - jnz bad_ram - movl %eax,%ebx - shrl $16,%ebx - cmpw %bx,%ax - jnz bad_ram - /* - * read col 11 wrap adr for real column data value - */ - movl $COL11_ADR, %esi /* set address to max col (11) wrap addr */ -fs movl (%esi), %eax /* read real col number at max col adr */ - /* - * validate column data - */ - cmpl $COL08_DATA, %eax /* col must be greater than 8 pattern */ - jb bad_ram - - cmpl $COL11_DATA, %eax /* and row must be less than 11 pattern */ - ja bad_ram - - subl $COL08_DATA, %eax /* normalize column data to zero */ - jc bad_ram - cmpb %ah,%al /* verify all 4 bytes of dword equal */ - jnz bad_ram - movl %eax,%edx - shrl $16,%edx - cmpw %dx,%ax - jnz bad_ram - /* - * merge bank and col data together - */ - addw %di,%dx /* merge of bank and col info in dl */ - /* - * fix ending addr mask based upon col info - */ - movb $3,%al - subb %dh,%al /* dh contains the overflow from the bank/col merge */ - movb %bl,%dh /* bl contains the row mask (aa, 07, 0f, 1f or 3f) */ - xchgw %cx,%ax /* cx = ax = 3 or 2 depending on 2 or 4 bank device */ - shrb %cl,%dh /* */ - incb %dh /* ending addr is 1 greater than real end */ - xchgw %cx,%ax /* cx is bank number again */ - /* - * issue all banks precharge - */ -bad_reint: - movl $DRCCTL, %esi /* setup DRAM control register with */ - movb $0x2,%al /* All banks precharge */ -fs movb %al, (%esi) - movl $CACHELINESZ, %esi /* address to init read buffer */ -fs movw %ax, (%esi) - - /* - * update ENDING ADDRESS REGISTER - */ - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movl %ecx,%ebx - addl %ebx, %edi -fs movb %dh, (%edi) - /* - * update CONFIG REGISTER - */ - xorb %dh,%dh - movw $0x00f,%bx - movw %cx,%ax - shlw $2,%ax - xchgw %cx,%ax - shlw %cl,%dx - shlw %cl,%bx - notw %bx - xchgw %cx,%ax - movl $DRCCFG, %edi -fs mov (%edi), %ax - andw %bx,%ax - orw %dx,%ax -fs movw %ax, (%edi) - jcxz cleanup - - decw %cx - movl %ecx,%ebx - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movb $0xff,%al - addl %ebx, %edi -fs movb %al, (%edi) - /* - * set control register to NORMAL mode - */ - movl $DRCCTL, %esi /* setup DRAM control register with */ - movb $0x0,%al /* Normal mode value */ -fs movb %al, (%esi) - movl $CACHELINESZ, %esi /* address to init read buffer */ -fs movw %ax, (%esi) - jmp nextbank - -cleanup: - movl $DRCBENDADR, %edi /* DRAM ending address register */ - movw $4,%cx - xorw %ax,%ax -cleanuplp: -fs movb (%edi), %al - orb %al,%al - jz emptybank - - addb %ah,%al - jns nottoomuch - - movb $0x7f,%al -nottoomuch: - movb %al,%ah - orb $0x80,%al -fs movb %al, (%edi) -emptybank: - incl %edi - loop cleanuplp - -#if defined(CFG_SDRAM_CAS_LATENCY_2T) || defined(CFG_SDRAM_CAS_LATENCY_3T) - /* set the CAS latency now since it is hard to do - * when we run from the RAM */ - movl $DRCTMCTL, %edi /* DRAM timing register */ - movb (%edi), %al -#ifdef CFG_SDRAM_CAS_LATENCY_2T - andb $0xef, %al -#endif -#ifdef CFG_SDRAM_CAS_LATENCY_3T - orb $0x10, %al -#endif - movb %al, (%edi) -#endif - movl $DRCCTL, %edi /* DRAM Control register */ - movb $0x3,%al /* Load mode register cmd */ -fs movb %al, (%edi) -fs movw %ax, (%esi) - - - movl $DRCCTL, %edi /* DRAM Control register */ - movb $0x18,%al /* Enable refresh and NORMAL mode */ -fs movb %al, (%edi) - - jmp dram_done - -bad_ram: - xorl %edx,%edx - xorl %edi,%edi - jmp bad_reint - -dram_done: - - /* readback DRCBENDADR and return the number - * of available ram bytes in %eax */ - - movl $DRCBENDADR, %edi /* DRAM ending address register */ - - movl (%edi), %eax - movl %eax, %ecx - andl $0x80000000, %ecx - jz bank2 - andl $0x7f000000, %eax - shrl $2, %eax - movl %eax, %ebx - -bank2: movl (%edi), %eax - movl %eax, %ecx - andl $0x00800000, %ecx - jz bank1 - andl $0x007f0000, %eax - shll $6, %eax - movl %eax, %ebx - -bank1: movl (%edi), %eax - movl %eax, %ecx - andl $0x00008000, %ecx - jz bank0 - andl $0x00007f00, %eax - shll $14, %eax - movl %eax, %ebx - -bank0: movl (%edi), %eax - movl %eax, %ecx - andl $0x00000080, %ecx - jz done - andl $0x0000007f, %eax - shll $22, %eax - movl %eax, %ebx - -done: movl %ebx, %eax - - jmp *%ebp |