summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* imx: mx6slevk: enable more DM driversPeng Fan2017-03-205-149/+130
| | | | | | | | | | | | Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. So needs to enable them together. DM FEC and SPI are not enabled, but they use gpio in board code. So use gpio_request first to request the gpio, because DM_GPIO is enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6slevk: introduce device tree supportPeng Fan2017-03-207-2/+2830
| | | | | | | | Introduce device tree support. dts from kernel commit c4f3f22edd Merge tag 'linux-kselftest-4.11-rc1' Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* imx: mx6slevk: use SPI_BOOTPeng Fan2017-03-202-2/+3
| | | | | | | Use SPI_BOOT instead of SYS_BOOT_SPINOR. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* ti: boot: Register the MMC controllers in SPL in the same way as in u-bootJean-Jacques Hiblot2017-03-1927-43/+30
| | | | | | | | | | | | To keep a consistent MMC device mapping in SPL and in u-boot, let's register the MMC controllers the same way in u-boot and in the SPL. In terms of boot time, it doesn't hurt to register more controllers than needed because the MMC device is initialized only prior being accessed for the first time. Having the same device mapping in SPL and u-boot allows us to use the environment in SPL whatever the MMC boot device. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-03-19145-466/+12949
|\ | | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: configs/bk4r1_defconfig configs/colibri_vf_defconfig configs/pcm052_defconfig include/configs/colibri_vf.h include/configs/pcm052.h
| * imx: ventana: add EMMC configurationTim Harvey2017-03-194-12/+82
| | | | | | | | | | | | Prepare for boards with EMMC instead of NAND flash Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * tools: imximage: add set bit commandPeng Fan2017-03-192-1/+15
| | | | | | | | | | | | | | | | | | Add set bit command support. Usage: SET_BIT 4 [address] [bitmask] Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * ARM: vf610: move to standard arch/board approachStefan Agner2017-03-1913-45/+45
| | | | | | | | | | | | | | | | Move Freescale/NXP Vybrid to a standard arch/board approach, similar to what has been done to i.MX 6 earlier in commit 89ebc82137be ("ARM: mx6: move to a standard arch/board approach"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * imx: ventana: make SD3_VSELECT board specificTim Harvey2017-03-192-14/+18
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: make OTG VBUS power enable board specificTim Harvey2017-03-193-8/+18
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: fix hwconfigTim Harvey2017-03-191-1/+1
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: change name of rs232_en to indicate polarityTim Harvey2017-03-191-1/+1
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: use mmc_root in boot scriptsTim Harvey2017-03-191-2/+2
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: move mmc_init to commonTim Harvey2017-03-192-33/+35
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: config: add gzwrite supportTim Harvey2017-03-191-0/+1
| | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * imx: ventana: add additional DRAM configurationsTim Harvey2017-03-191-0/+45
| | | | | | | | | | | | | | | | - 64bit 8gB density (4GiB) IMX6DQ - 64bit 4gB density (2GiB) IMX6SDL Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * colibri_imx7: split and resize firmware MTD partitionStefan Agner2017-03-191-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Use two separate partitions for the two firmware instances. Also resize them to be of the same size which also makes the start of the UBI partition nicely aligned to 0x400000. In order to detect the new MTD layout and whether we run a U-Boot with the new BCB format or not, introduce a variable called "updlevel" which we can use in update/upgrade scripts. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
| * colibri_imx7: use device-tree for MTD partitionsStefan Agner2017-03-193-1/+15
| | | | | | | | | | | | | | Use device-tree fixup to communicate the MTD partitions to the kernel. Remove mtdparts from the kernel command line. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * colibri_imx7: setup PMIC sleep mode configurationStefan Agner2017-03-191-0/+16
| | | | | | | | | | | | Disable 3.3V Ethernet and ARM rail when entering sleep mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * colibri_imx7: implement board level USB PHY modeStefan Agner2017-03-191-0/+28
| | | | | | | | | | | | | | | | Implement board level USB PHY mode callback. On USB OTG Port 1 the Colibri standard foresees GPIO USBC_DET to decide whether the port should run in Host or Device mode. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * colibri_imx7/colibri_imx6/apalis_imx6: limit bootm memoryStefan Agner2017-03-193-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Limit memory used for relocation of FDT or initrd. This is required to make sure that relocated artifacts are within lowmem. If fdt_high or initrd_high are not set, U-Boot automatically relocates artifacts to the end of memory. But this area won't be part of lowmem and hence will not be accessible by the kernel during early boot. With VM split set to 2G/2G (i.MX default), only the 2GB Apalis iMX6 is affected by that issue. With VM split set to 3G/1G (ARM default) also modules with 1GB of memory are affected. With the latter the amount of lowmem will be 760MiB. The value must also not exceed available memory! Use a safe value of 512MiB for Apalis and 256MiB for Colibri. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
| * toradex apalis/colibri: add device tree overlay supportStefan Agner2017-03-197-0/+7
| | | | | | | | | | | | | | | | Device tree overlays might prove useful in the future, enable it by default on all Toradex modules. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
| * toradex apalis/colibri: use common USB product id fallbackStefan Agner2017-03-198-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | All modules use the common g_dnl_bind_fixup implementaton which calculates the PID according to product id (read from the config block) plus offset of 0x4000. In case there is no config block support (e.g. SPL) or in case the config block is not readable, fall back to a generic product id (product id 0, which can be interpreted as "Unknown Module"). Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Max Krummenacher <max.krummenacher@toradex.com>
| * mx7: Add 1.2GHz speed grade entryFabio Estevam2017-03-191-0/+3
| | | | | | | | | | | | | | | | There are recent MX7 parts that have a 1.2GHz speed grade. Add support for it. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx7: Fix the get_cpu_speed_grade_hz() return valuesFabio Estevam2017-03-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the MX7D fuse map the following speed grades are available: 800 MHz 500 MHz 1000 MHz 1200 MHz So simply return the real frequency that corresponds to the speed grade. With this change we see on boot: CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx7: Fix speed grade entryFabio Estevam2017-03-191-3/+3
| | | | | | | | | | | | | | According to the MX7D fuse map the speed grade of the parts, which return '1' is 500MHz instead of 850MHz, so fix it accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * arm: dts: imx6ul: add usbotg aliasesSébastien Szymanski2017-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is needed to make the UMS command work again as it fails with the following error: BIOS> ums 0 mmc 0 UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x748000 g_dnl_register: failed!, error: -19 ERROR: g_dnl_register failed at cmd/usb_mass_storage.c:179/do_usb_mass_storage() That's because usb_setup_ehci_gadget() function is looking for the usb device using the req_sed number. This change makes the usb device have a req_seq number and the UMS command work again: BIOS> ums 0 mmc 0 UMS: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x748000 CTRL+C - Operation aborted Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
| * arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier boardSébastien Szymanski2017-03-1913-1/+1396
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OPOS6UL is an i.MX6UL based SoM with 256MB RAM, 4GB eMMC and an ethernet phy. OPOS6ULDev is carrier board for the OPOS6UL. U-Boot SPL 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09) Trying to boot from MMC1 U-Boot 2017.03-rc3-00002-g5085c26 (Mar 07 2017 - 09:48:09 +0100) CPU: Freescale i.MX6UL rev1.0 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 40C Reset cause: POR Model: Armadeus Systems OPOS6UL SoM on OPOS6ULDev board DRAM: 256 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Video: 800x480x18 In: serial Out: serial Err: serial Net: FEC [PRIME] Hit any key to stop autoboot: 0 Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * dm: imx: serial: add i.MX6UL supportSébastien Szymanski2017-03-191-0/+1
| | | | | | | | Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
| * MCCMON6: defconfig: Move 'quiet' console parameter to 'console' env variableLukasz Majewski2017-03-191-2/+2
| | | | | | | | Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * arm: imx6: tqma6: add support for TQMa6DL variantMarkus Niebel2017-03-179-8/+223
| | | | | | | | | | | | | | | | This adds support for TQMa6DL using i.MX6DL and 1GiB DRAM Since The module will use the same devicetree, we patch the ram size in ft_board_setup. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * arm: imx6: tqma6: use CONFIG_TQM6x for SOM specific settingsMarkus Niebel2017-03-172-10/+11
| | | | | | | | | | | | | | | | We have a Kconfig name for the module types. Let's Use it. Some feature selections and configurations are based on the module. Module selection selects the CPU type. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * i.MX6Q: isiot: Switch the mmc env based on devnoJagan Teki2017-03-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board_mmc_get_env_dev Switch the mmc env based on the mmc devno, instead of separately defining a config item in include/configs using board_mmc_get_env_dev - devno 0: sd/esd - devno 1: mmc/emmc Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * i.MX6Q: icorem6_rqs: Add mmc_late_initJagan Teki2017-03-172-2/+22
| | | | | | | | | | | | | | | | | | | | | | Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * i.MX6Q: icorem6_rqs: Add modeboot env via board_late_initJagan Teki2017-03-174-16/+36
| | | | | | | | | | | | | | | | | | | | | | Add runtime, modeboot env which is setting mmcboot based on the bootdevice so-that conditional macros for MMC via CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx6: icorem6_rqs: Add eMMC boot supportJagan Teki2017-03-172-3/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot from eMMC: -------------- U-Boot SPL 2017.01-00318-g8e243f8 (Jan 26 2017 - 11:53:21) Trying to boot from MMC2 U-Boot 2017.01-00318-g8e243f8 (Jan 26 2017 - 11:53:21 +0100) CPU: Freescale i.MX6D rev1.2 at 792 MHz Reset cause: POR Model: Engicam i.CoreM6 Quad/Dual RQS Starter Kit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Net: No ethernet found. Hit any key to stop autoboot: 0 Booting from mmc ... switch to partitions #0, OK mmc1(part 0) is current device Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * mx6: tqma6: clear enet clk sel for mba6Markus Niebel2017-03-171-0/+5
| | | | | | | | | | | | we have external ref clock from phy. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * imx6: tqma6: adjust ethernet phy reset delayMarkus Niebel2017-03-171-2/+2
| | | | | | | | | | | | fix the reset delay which was to short Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * imx6: tqma6: disable spi CS unused in U-BootMarkus Niebel2017-03-171-22/+0
| | | | | | | | | | | | | | | | Since the CS are not in use, do not map them. User of starterkit mainboard is free to use them otherwise. When using these pins later in the OS for instance as GPIO IRQ pin, they need to be input. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * imx6: tqma6: use lower driver stength for I2C pinsMarkus Niebel2017-03-172-2/+2
| | | | | | | | | | | | | | The current driver stength is too high, leading to spec violations on the falling edge. Fix it with values from HW Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * imx6: tqma6: implement power_init_boardMarkus Niebel2017-03-171-10/+12
| | | | | | | | | | | | | | | | PMIC implements proper I2C bus switching, implement power_init_board instead handling in board_late_init. Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * imx6: icorem6_rqs: Update SPL board boot order for eMMCJagan Teki2017-03-171-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1 Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: dts: imx6qdl-icore-rqs: Add eMMC nodeJagan Teki2017-03-171-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add usdhc4 node, which is eMMC for Engicam i.CoreM6 RQS modules. eMMC Log: -------- icorem6qdl-rqs> mmc dev 1 switch to partitions #0, OK mmc1(part 0) is current device icorem6qdl-rqs> mmcinfo Device: FSL_SDHC Manufacturer ID: fe OEM: 14e Name: MMC04 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.4.1 High Capacity: Yes Capacity: 3.5 GiB Bus Width: 4-bit Erase Group Size: 512 KiB HC WP Group Size: 4 MiB User Capacity: 3.5 GiB Boot Capacity: 16 MiB ENH RPMB Capacity: 128 KiB ENH Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * i.MX6UL: isiot: Switch the mmc env based on devnoJagan Teki2017-03-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board_mmc_get_env_dev Switch the mmc env based on the mmc devno, instead of separately defining a config item in include/configs using board_mmc_get_env_dev - devno 0: sd/esd - devno 1: mmc/emmc Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * i.MX6UL: isiot: Add mmc_late_initJagan Teki2017-03-172-2/+22
| | | | | | | | | | | | | | | | | | | | | | Let the runtime code can set the mmcdev and mmcroot based on the devno using mmc_get_env_dev instead of defining separately in build-time configs using mmc_late_init func. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * i.MX6UL: isiot: Add modeboot env via board_late_initJagan Teki2017-03-175-20/+40
| | | | | | | | | | | | | | | | | | | | | | | | Add runtime, modeboot env which is setting mmcboot, or nandboot based on the bootdevice so-that conditional macros b/w MMC and NAND for CONFIG_BOOTCOMMAND should be avoided in config files. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * i.MX6UL: isiot: Add eMMC boot supportJagan Teki2017-03-176-2/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot from eMMC: -------------- U-Boot SPL 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27) Trying to boot from MMC2 U-Boot 2017.01-00314-gd0cd9cd-dirty (Jan 25 2017 - 13:25:27 +0100) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 36C Reset cause: POR Model: Engicam Is.IoT MX6UL eMMC Starterkit DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial switch to partitions #0, OK mmc1(part 0) is current device Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx6: isiotmx6ul: Update SPL board boot order for eMMCJagan Teki2017-03-171-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SPL mmc device index is get based on the boot device, like - BOOT_DEVICE_MMC1 for mmc device 0 - BOOT_DEVICE_MMC2 for mmc device 1 Currently BOOT_DEVICE_MMC1 is setting both SD/eSD and MMC/eMMC boot devices in i.MX, So u-boot is loading from mmc device 0 even "if the board booting from SD/eSD or MMC/eMMC" So, this patch set BOOT_DEVICE_MMC2 for MMC/eMMC so for MMC/eMMC the u-boot is loading from mmc device 1 and the board file need to take care if the board have different mmc device order intialization. Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx6: Add src_base structure define macroJagan Teki2017-03-174-9/+6
| | | | | | | | | | | | | | | | Instead of initializing 'struct src' to SRC_BASE_ADDR on every function better to have global define macro. Reviewed by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@openedev.com>
| * imx: Use IMX6_BMODE_* macros instead of numericalsJagan Teki2017-03-172-15/+60
| | | | | | | | | | | | | | | | | | Use meaningful macros IMX6_BMODE_*, instead of numerical number in boot mode detection code. Cc: Tim Harvey <tharvey@gateworks.com> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@openedev.com>
View Lorry Controller Status