summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* mmc: Added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQVipul Kumar2018-03-017-9/+13
| | | | | | | | | This patch added Kconfig support for CONFIG_ZYNQ_SDHCI_MAX_FREQ and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Added Kconfig support for CONFIG_XILINX_GPIOVipul Kumar2018-03-013-1/+6
| | | | | | | | | This patch added Kconfig support for CONFIG_XILINX_GPIO and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1Vipul Kumar2018-03-0116-8/+29
| | | | | | | | | This patch added Kconfig support for CONFIG_ZYNQ_I2C0 and CONFIG_ZYNQ_I2C1 and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSETVipul Kumar2018-03-019-3/+11
| | | | | | | | | This patch added Kconfig support for CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEEDVipul Kumar2018-03-013-2/+7
| | | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SPEED and set it to default value 100000. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVEVipul Kumar2018-03-013-2/+7
| | | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ_SLAVE and set it default to 0. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfigVipul Kumar2018-03-0112-5/+10
| | | | | | | | | This patch enabled CONFIG_SYS_I2C_ZYNQ in the respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* i2c: Added Kconfig support for CONFIG_SYS_I2C_ZYNQVipul Kumar2018-03-011-0/+6
| | | | | | | | This patch added Kconfig support for CONFIG_SYS_I2C_ZYNQ. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* arm: zynq: fpga: Added Kconfig support for CONFIG_FPGA_ZYNQPLVipul Kumar2018-02-2819-2/+24
| | | | | | | | This patch added Kconfig support for CONFIG_FPGA_ZYNQPL and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
* fpga: Added Kconfig support for FPGA_SPARTAN3Vipul Kumar2018-02-289-4/+9
| | | | | | | | This patch added Kconfig support for FPGA_SPARTAN3 and migrates the values over to the defconfigs. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
* Merge git://git.denx.de/u-boot-netTom Rini2018-02-277-124/+155
|\
| * net: phy: smsc: Add SMSC LAN8741 supportArno Steffens2018-02-261-0/+11
| | | | | | | | | | Signed-off-by: Arno Steffens <star@gmx.li> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: e1000: Fix e1000_igb semaphore handlingBernhard Messerklinger2018-02-261-1/+1
| | | | | | | | | | | | | | | | Fix commit f1bcad22dd19 ("net: e1000: add support for writing to EEPROM"). Signed-off-by: Bernhard Messerklinger <bernhard.messerklinger@br-automation.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * NET: designware: fix clock enableEugeniy Paltsev2018-02-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit ba1f966725223 ("net: designware: add clock support") we got NET broken on axs101 and axs103 platforms. Some clock don't support gating so their clock drivers don't implement .enable/.disable callbacks. In such case clk_enable returns -ENOSYS. Also some clock drivers implement .enable/.disable callbacks not for all clock IDs and return -ENOSYS (or -ENOTSUPP) for others. If we have such clock in 'clocks' list of designware ethernet controller node we fail to probe designware ethernet. Fix it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * phy: Fix style violationsMario Six2018-02-261-37/+57
| | | | | | | | | | | | | | Fix some style violations in the generic PHY management code. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
| * cmd: mdio: Fix style violationsMario Six2018-02-261-4/+3
| | | | | | | | | | | | | | Fix some style violations in the MDIO command. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
| * net: phy: marvell 88e151x: Fix handling of bare RGMII interface typeMario Six2018-02-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 68e6ecadc551 ("net: phy: marvell 88e151x: Fix handling of RGMII interface types") fixed the initialization of 88e151x phys, but made it so that interfaces of type PHY_INTERFACE_MODE_RGMII had both RX and TX delay bits cleared. The default (like in m88e1111s_config) is to have both bits set. Hence, this patch changes the behavior in the PHY_INTERFACE_MODE_RGMII case so that both bits are set. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: phy: marvell: Fix style violationsMario Six2018-02-261-22/+22
| | | | | | | | | | | | | | | | Fix some style violations (mostly wrong indentions) in the Marvell PHY driver. Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
| * net: tsec: Make live-tree compatibleMario Six2018-02-261-23/+19
| | | | | | | | | | | | | | | | Make the tsec ethernet driver compatible with a live device tree. Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Mario Six <mario.six@gdsys.cc>
| * net: tsec: Fix memory leak in error pathMario Six2018-02-261-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | tsec_initialize allocates a private driver structure using malloc. Should the memory allocation of this private structure fail, the function execution is aborted with a return 0, but the previously allocated device structure is never freed, hence leaked. Free the device structure in the error case. Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * net: tsec: Fix style violationsMario Six2018-02-261-35/+37
| | | | | | | | | | Signed-off-by: Mario Six <mario.six@gdsys.cc> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Kconfig: cmd: Make networking command dependent on NETMichal Simek2018-02-2771-134/+94
|/ | | | | | | | Enable networking command only when NET is enabled. And remove selecting NET for CMD_NET Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-mmcTom Rini2018-02-254-27/+35
|\
| * mmc: omap_hsmmc: use a default 52MHz max clock rate if none is specifiedJean-Jacques Hiblot2018-02-261-0/+2
| | | | | | | | | | | | | | | | | | | | mmc_of_parse() doesn't set a default value if none is available in DT. In that case, use a default 52MHz clock rate. Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mmc: omap_hsmmc: make it possible to compile out ADMA supportJean-Jacques Hiblot2018-02-262-6/+15
| | | | | | | | | | | | | | | | | | | | | | Some platforms don't have ADMA controllers. For those platforms, compiling it out reduces the size of the binary by about 600 bytes. Leaving the support in doesn't break things as the driver checks at runtime if the ADMA2 controller is present. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mmc: omap_hsmmc: compile out write support if not neededJean-Jacques Hiblot2018-02-261-2/+9
| | | | | | | | | | | | | | | | This reduces the size of the binary by about 196 bytes. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mmc: omap_hsmmc: do not embed struct mmc in struct omap_hsmmc_platJean-Jacques Hiblot2018-02-262-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | The area for struct mmc can be allocated dynamically. It greatly reduces the size of struct omap_hsmmc_plat. This is useful in cases where the board level code declares one or two struct omap_hsmmc_plat because it doesn't use the Driver Model. This saves around 740 bytes for the am335x_evm SPL. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * mmc: fix off-by-one bug in mmc_startup_v4()Alexander Kochetkov2018-02-231-1/+1
| | | | | | | | | | | | | | MMC card with EXT_CSD_REV value 9 will trigger off-by-one bug while accessing mmc_versions array. The patch fix that. Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
| * mmc: Drop unnecessary case for mmc_probe()Faiz Abbas2018-02-231-6/+1
| | | | | | | | | | | | Drop the unnecessary empty function case for mmc_probe(). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
| * mmc: synchronize the sequence with enum bus_mode in mmc.hJaehoon Chung2018-02-211-8/+3
| | | | | | | | | | | | | | | | If some configs are disabled, number of freqs array will not assigned to correct value with bus_mode. Synchornize the ordering with enum bus_mode in mmc.h. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
* | Merge git://git.denx.de/u-boot-rockchipTom Rini2018-02-255-1/+58
|\ \
| * | rockchip: clk: rk3399: handle set_rate/get_rate for PLL_PPLLPhilipp Tomsich2018-02-241-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device-tree node for the PMU clk controller assigns to its parent (i.e. PLL_PPLL) even though this clock currently is set up statically by an init-function. In order to avoid unexpected failures, a simple implementation of set_rate (which accepts requests, but notifies the caller of the preset frequency in its return value) and get_rate (which always returns the preset frequency) are added. Note that this is required for the RK808 PMIC to probe successfully on the RK3399-Q7, following the support for the assigned-clocks property. References: commit f4fcba5c5baa ("clk: implement clk_set_defaults()") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
| * | rockchip: rk3288: Fix wrong TPL_TEXT_BASEJagan Teki2018-02-242-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TPL offset 0xff704004 is unaligned address which is adding nearest 8-bytes for next instruction, So 0xff704004 is adding 0x20 for proper alignment which is causing the next instruction data 0xefffffff is moved. Hexdump with overlaped bytes: ----------------------------- 0000000 0000 0000 0000 0000 0000 0000 0000 0000 0000010 0000 0000 0000 0000 0000 0000 ffff eaff So, Fix the TEXT_BASE for proper aligned address 0xff704000 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * | rockchip: rk3288: Add TPL_LDSCRIPTJagan Teki2018-02-242-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to size limitations in SPL by adding falcon mode, rk3288 support TPL. In order to not overlap SPL_TEXT_BASE add TPL_TEXT_BASE with u-boot-tpl.lds that intern call u-boot-spl.lds with proper TEXT_BASE values. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * | rockchip: clk: rk3368: handle clk_enable requests for GMACPhilipp Tomsich2018-02-241-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ba1f96672522 ("net: designware: add clock support"), the designware GMAC driver enables all referenced clocks. While this is a no-op for the RK3368 during boot-up (reset behaviour has all the clock gates open anyway), we still need to handle the clock-ids passed in the enable op of the clock-driver and return a success. This change extends the RK3368 clk driver to: (a) provide a enable op (b) signals success to the caller when the clocks for the GMAC are enabled (no actual action is necessary as the gates are open after reset) References: commit ba1f96672522 ("net: designware: add clock support") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
| * | rockchip: clk: rk3399: handle clk_enable requests for GMACPhilipp Tomsich2018-02-241-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit ba1f96672522 ("net: designware: add clock support"), the designware GMAC driver enables all referenced clocks. While this is a no-op for the RK3399 during boot-up (reset behaviour has all the clock gates open anyway), we still need to handle the clock-ids passed in the enable op of the clock-driver and return a success. This change extends the enable-op of the rk3399 clk driver to signal success to the caller when the clocks for the GMAC are enabled. References: commit ba1f96672522 ("net: designware: add clock support") Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Tested-by: Klaus Goger <klaus.goger@theobroma-systems.com>
* | | Merge git://git.denx.de/u-boot-imxTom Rini2018-02-2518-179/+237
|\ \ \
| * | | imx: spl: Partially revert "spl: eMMC/SD: Provide one __weak spl_boot_mode() ↵Fabio Estevam2018-02-241-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | function" Commit d695d6627803 ("spl: eMMC/SD: Provide one __weak spl_boot_mode() function") breaks the boot on several i.MX6 boards, such as cuboxi and wandboard: U-Boot SPL 2018.03-rc1-00212-g48914fc119 (Feb 10 2018 - 11:04:33 +1300) Trying to boot from MMC1 Failed to mount ext2 filesystem... spl_load_image_ext: ext4fs mount err - 0 Partially revert it so that we can boot U-Boot again on these i.MX6 platforms. Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Breno Lima <breno.lima@nxp.com>
| * | | ARM: dts: i.MX6QDL: icore-rqs: Fix eMMC detection during SPLJagan Teki2018-02-241-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | usdhc4 has eMMC on icore-rqs boards, SPL is not detecting it becuase of u-boot,dm-spl flag so add it to make eMMC working. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | imx6q: engicam: Use SPL_LOAD_FIT for MMC boardsJagan Teki2018-02-227-2/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently SPL_LOAD_FIT is unable to boot from nand on i.MX6QDL platform, so enable only for MMC boards. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | imx6: engicam: Drop SPL_EXT_SUPPORTJagan Teki2018-02-225-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX6 boards still using raw MMC write for SPL and u-boot-dtb.img along with Falcon mode configurations, so drop filesystem based write through SPL_EXT_SUPPORT. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | imx6ul: engicam: Drop isiot-mmc defconfigJagan Teki2018-02-225-96/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Engicam Is.IoT has eMMC and NAND cpu modules where MMC is common for both, so remove explicit mmc defconfig. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | arm: imx: hab: Define HAB_RVT_BASE according to the processor versionBreno Lima2018-02-222-104/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the following devices are using a different definition for ROM Vector Table addresses: - i.MX6DQP = All rev - i.MX6DQ >= rev 1.5 - i.MX6SDL >= rev 1.2 There is no need to create a new RVT macros since the only update were the RVT base address. Remove HAB_RVT_*_NEW macros and define a new RVT base address. More details about RVT base address can be found on processors Reference Manual and in the following documents: EB803: i.MX 6Dual/6Quad Applications Processor Silicon Revision 1.2 to 1.3 Comparison EB804: i.MX 6Solo/6DualLite Application Processor Silicon Revision 1.1 to 1.2/1.3 Comparison Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx: hab: Check if CSF contains deprecated commandsUtkarsh Gupta2018-02-222-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Write, Check and Set MID commands have been deprecated from the Code Signing Tool (CST) v2.3.3 and will not be implemented in newer versions of HAB, hence the following features are no longer available: - Write Data - Clear Mask - Set Mask - Check All Clear - Check All Set - Check Any Clear - Check Any Set - Set MID The inappropriate use of Write Data command may lead to an incorrect authentication boot flow. Since no specific application has been identified that requires the use of any of these features, it is highly recommended to add this check. Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx: hab: Check if CSF is valid before authenticating imageUtkarsh Gupta2018-02-222-0/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For proper authentication the HAB code must check if the CSF is valid. Users must call the csf_is_valid() function to parse the CSF prior to authenticating any additional images. The function will return a failure if any of the following invalid conditions are met: - CSF pointer is NULL - CSF Header does not exist - CSF does not lie within the image bounds - CSF command length zero Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx: hab: Ensure the IVT DCD pointer is Null prior to calling HAB ↵Utkarsh Gupta2018-02-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | authenticate function. DCD commands should only be present in the initial boot image loaded by the SoC ROM. DCD should not be present in images that will be verified by software using HAB RVT authentication APIs. Newer versions of HAB will generate an error if a DCD pointer is present in an image being authenticated by calling the HAB RVT API. Older versions of HAB will process and run DCD if it is present, and this could lead to an incorrect authentication boot flow. It is highly recommended this check is in place to ensure additional HAB verified images do not include a DCD table. Signed-off-by: Utkarsh Gupta <utkarsh.gupta@nxp.com> Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | imx: hab: Keep CAAM clock enabled after authenticating additional imagesBreno Lima2018-02-221-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is not possible to run CMD_DEK on i.MX SPL targets: => dek_blob 0x12000000 0x12001000 128 The system hangs after running dek_blob because the CAAM clock is being disabled by the HAB code. There is no need to disable CAAM clock after authenticating additional boot images, thus keep CAAM clock enabled to address this issue. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | Revert "mx6: ddr: Allow changing REFSEL and REFR fields"Maxim Yu. Osipov2018-02-221-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit edf0093732225c2fd0791c3864e9a3eef1f92f19 for cm_fx6 iMX.6 Solo module as it causes frequent (around 10 percent of power cycles) board's hangs. These hangs happen in SPL when BSS is being initialized in SDRAM - it appear that variables from BSS contain trash values which lead to board hangs. Looks like that SDRAM doesn't yet finish initialization in these cases. Signed-off-by: Maxim Yu. Osipov <mosipov@ilbers.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
| * | | mx6sabresd: Select the CONFIG_EFI_PARTITION optionFabio Estevam2018-02-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | With fastboot support enabled, it is useful to be able to list the eMMC EFI partitions, so select the CONFIG_EFI_PARTITION option. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * | | mx6: fix MAINTAINERS for Engicam i.CoreM6 1.5 MIPIStefano Babic2018-02-181-0/+4
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jagan Teki <jagan@amarulasolutions.com>
View Lorry Controller Status