summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeFilesLines
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-04-1364-239/+4929
|\ | | | | | | | | | | Drop CONFIG_STACKSIZE from include/configs/imx6_logic.h Signed-off-by: Tom Rini <trini@konsulko.com>
| * imx: i.mx6q: add the initial support for LogicPD i.MX6Q SOMAdam Ford2017-04-1212-0/+1143
| | | | | | | | | | | | | | | | | | | | | | | | | | Logic PD has an i.MX6Q system on module (SOM) with a development kit. The SOM has a built-in microSD socket, DDR and NAND flash. The development kit has an SMSC Ethernet PHY, serial debug port and a variety of peripherals. This have been verified to boot the i.MX6Q version over either SD on the development kit or NAND built into the SOM. Items in the dtsi file are specific to the SOM itself. Items in the dts file are in the baseboard. Future versions of the SOM will come out supporting the same basebord and potentially future base boards will come out supporting the same SOM. Signed-off-by: Adam Ford <aford173@gmail.com>
| * cmd_mmc: fix arg parsing for setdsr subcmdMarkus Niebel2017-04-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | The handler do_setdsr receives only the dsr parameter, the action is parsed before. Error was introduced when restructuring the mmc command implementation in commit 1fd93c6e7d8a1e4d6261058cefab11b875ded252. Reported-by: Michael Krummsdorf <Michael.Krummsdorf@tq-group.com> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * imx: mx7ulp: Fix SPLL/APLL clock rate calculation issueYe Li2017-04-121-2/+6
| | | | | | | | | | | | | | | | | | The num/denom is a float value, but in the calculation it is convert to integer 0, and wrong result. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: ventana: config: set MMC env Partition to 1Tim Harvey2017-04-121-0/+1
| | | | | | | | | | | | Partition 1 equates to EMMC boot0 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * mx6sabresd: README: Add eMMC boot configurationBreno Lima2017-04-121-8/+47
| | | | | | | | | | | | | | Explain how to flash the eMMC and how to boot from it. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * Set console speed to 115200 on mx6cuboxi.Vagrant Cascadian2017-04-121-1/+1
| | | | | | | | | | | | | | | | | | By default, u-boot itself outputs on the serial console at 115200, so it may as well pass the same value to the booted operating system as well. Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * board: advantech: dms-ba16: apply the proper register setting to fix the ↵Yung-Ching LIN2017-04-121-1/+2
| | | | | | | | | | | | | | | | | | | | voltage peak issue Apply the proper setting for the reserved bits in SetDes Test and System Mode Control register to avoid the voltage peak issue while we do the IEEE PHY comformance test Signed-off-by: Ken Lin <yungching0725@gmail.com> Acked-by: Akshay Bhat <akshay.bhat@timesys.com>
| * board: advantech: dms-ba16: fix AR8033 reset timing issueYung-Ching LIN2017-04-121-1/+2
| | | | | | | | | | | | | | Add the delay (10ms) to ensure the clock is stable and to meet the clock-to-reset(1ms) requirement recommended in the AR8033 datasheet Signed-off-by: Ken Lin <yungching0725@gmail.com> Acked-by: Akshay Bhat <akshay.bhat@timesys.com>
| * board: advantech: dms-ba16: add the PMIC configuration supportYung-Ching LIN2017-04-121-0/+51
| | | | | | | | | | | | | | Change the PMIC bulk configuration from auto mode to sync mode to avoid the voltage shutdown issue Signed-off-by: Ken Lin <yungching0725@gmail.com> Acked-by: Akshay Bhat <akshay.bhat@timesys.com>
| * board: advantech: dms-ba16: Add the configuration options for display ↵Yung-Ching LIN2017-04-122-0/+5
| | | | | | | | | | | | | | | | | | | | initialization Add the configuration options for display initialization in case we need to do the display initialization in kernel to support different timing settings Signed-off-by: Ken Lin <yungching0725@gmail.com> Acked-by: Akshay Bhat <akshay.bhat@timesys.com>
| * MAINTAINERS: Fix ARM FREESCALE IMX filesJagan Teki2017-04-121-2/+1
| | | | | | | | | | | | | | | | - Remove arch/arm/cpu/arm926ejs/imx/ which is not available - arch/arm/cpu/imx-common/ => arch/arm/imx-common/ Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * MCCMON6: defconfig: Add tftp_nor_dtb command for NOR DTB updateLukasz Majewski2017-04-121-0/+8
| | | | | | | | Signed-off-by: Lukasz Majewski <lukma@denx.de>
| * ARM: mx5: Rename M53EVKMarek Vasut2017-04-058-9/+9
| | | | | | | | | | | | The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
| * ARM: mxs: Rename M28EVKMarek Vasut2017-04-0510-15/+15
| | | | | | | | | | | | The board is now manufactured by Aries Embedded GmbH , rename it. Signed-off-by: Marek Vasut <marex@denx.de>
| * configs: imx6: Select missing BOARD_LATE_INITJagan Teki2017-03-266-5/+2
| | | | | | | | | | | | | | | | | | | | Select missing BOARD_LATE_INIT from configs/ to respective targets on arch area for Engicam imx6 boards. Cc: Tom Rini <trini@konsulko.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * imx: ventana: add new board configs to MAINTAINERSTim Harvey2017-03-261-1/+3
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: fix GW5903 VDD_ARM railTim Harvey2017-03-261-0/+6
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: config: add EMMC boot optionsTim Harvey2017-03-201-0/+4
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: add GW5903 supportTim Harvey2017-03-205-4/+153
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: add GW560x supportTim Harvey2017-03-206-28/+163
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * imx: ventana: add GW5904 supportTim Harvey2017-03-2010-16/+340
| | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * drivers: net: phy: add MV88E6xx options to KconfigTim Harvey2017-03-201-0/+13
| | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * imx: mx6slevk: enable more DM driversPeng Fan2017-03-205-149/+130
| | | | | | | | | | | | | | | | | | | | | | | | Enable more DM drivers. The imx I2C/MMC DM drivers needs DM_GPIO enabled. So needs to enable them together. DM FEC and SPI are not enabled, but they use gpio in board code. So use gpio_request first to request the gpio, because DM_GPIO is enabled. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6slevk: introduce device tree supportPeng Fan2017-03-207-2/+2830
| | | | | | | | | | | | | | | | Introduce device tree support. dts from kernel commit c4f3f22edd Merge tag 'linux-kselftest-4.11-rc1' Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
| * imx: mx6slevk: use SPI_BOOTPeng Fan2017-03-202-2/+3
| | | | | | | | | | | | | | Use SPI_BOOT instead of SYS_BOOT_SPINOR. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* | lib: div64: sync with LinuxPeng Fan2017-04-133-10/+508
| | | | | | | | | | | | | | Sync with Linux commit ad0376eb1483b ("Merge tag 'edac_for_4.11_2'"). Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Tom Rini <trini@konsulko.com>
* | sandbox: Change CONFIG_SANDBOX_BITS_PER_LONG to hard-codedTom Rini2017-04-132-7/+5
| | | | | | | | | | | | | | | | | | Instead of having CONFIG_SANDBOX_BITS_PER_LONG in sandbox.h set to 64 with a comment to change to 32 on a 32bit host, simply set this to 64 in asm/types.h and have the comment be there. Cc: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | tiny-printf: Add support for %p formatVignesh R2017-04-131-0/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for %p, %pa[p], %pM, %pm and %pI4 formats to tiny-printf. %pM and %pI4 are widely used by SPL networking stack and is required if networking support is desired in SPL. %p, %pa and %pap are mostly used by debug prints and hence supported only when DEBUG is enabled. Before this patch: $ size spl/u-boot-spl text data bss dec hex filename 99325 4899 218584 322808 4ecf8 spl/u-boot-spl After this patch (with CONFIG_SPL_NET_SUPPORT): $ size spl/u-boot-spl text data bss dec hex filename 99666 4899 218584 323149 4ee4d spl/u-boot-spl So, this patch adds ~350 bytes to code size. If CONFIG_SPL_NET_SUPPORT is not enabled, this adds ~25 bytes. If CONFIG_USE_TINY_PRINTF is disabled then: $ size spl/u-boot-spl text data bss dec hex filename 101116 4899 218584 324599 4f3f7 spl/u-boot-spl So, there is still ~1.4K space saved even with support for %pM/%pI4. Compiler used is to build is: arm-linux-gnueabihf-gcc (Linaro GCC 6.2-2016.11) 6.2.1 20161016 Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | pci: Add a command to show PCI regionsSimon Glass2017-04-131-2/+49
| | | | | | | | | | | | | | Add 'pci regions' which lists the I/O and memory regions accessible from the PCI controller. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Fix a bug with PL010s running at 19200 baudAlyssa Rosenzweig2017-04-131-1/+1
| | | | | | | | | | | | | | I don't have the hardware test this, but it is almost certainly a typo in the code dating back to at least 2004. Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
* | board_f: Rename initdram() to dram_init()Simon Glass2017-04-13133-177/+176
| | | | | | | | | | | | | | | | | | This allows us to use the same DRAM init function on all archs. Add a dummy function for arc, which does not use DRAM init here. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Dummy function on nios2] Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: freescale: Rename initdram() to fsl_initdram()Simon Glass2017-04-1213-12/+24
| | | | | | | | | | | | | | This function name shadows a global name but is in fact different. This is very confusing. Rename it to help with the following refactoring. Signed-off-by: Simon Glass <sjg@chromium.org>
* | debug_uart: Try not to use stack in printchtim.chick2017-04-121-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Spam detection software, running on the system "lists.denx.de", has identified this incoming email as possible spam. The original message has been attached to this so you can view it or label similar future email. If you have any questions, see @@CONTACT_ADDRESS@@ for details. Content preview: Previous change to create _printch causes the stack to be used, breaking printch before stack is available. Inline _printch to prevent this happening. Signed-off-by: Tim Chick <tim.chick@mediatek.com> --- [...] Content analysis details: (6.3 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 0.7 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL [188.29.165.105 listed in zen.spamhaus.org] 3.6 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL 1.6 RCVD_IN_BRBL_LASTEXT RBL: No description available. [188.29.165.105 listed in bb.barracudacentral.org] 0.4 RDNS_DYNAMIC Delivered to internal network by host with dynamic-looking rDNS Previous change to create _printch causes the stack to be used, breaking printch before stack is available. Inline _printch to prevent this happening. Signed-off-by: Tim Chick <tim.chick@mediatek.com>
* | env: fix memory leak in fw_env routinesStefano Babic2017-04-122-19/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | fw_env_open allocates buffers to store the environment, but these buffers are never freed. This becomes quite nasty using the fw_ tools as library, because each access to the environment (even just reading a variable) generates a memory leak equal to the size of the environment. Fix this renaming fw_env_close() as fw_env_flush(), because the function really flushes the environment from RAM to storage, and add a fw_env_close function to free the allocated resources. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | env: add a version number to check APIStefano Babic2017-04-121-0/+15
| | | | | | | | | | | | | | | | | | | | | | Changes in the environment library are difficult to tracked by programs using the library. Add simply an API version number that must be increased each time when the API is changed. This can be detected and a program can work with different versions of the library. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | env: split fw_env.h in public and private partsStefano Babic2017-04-125-50/+59
| | | | | | | | | | | | | | | | | | Move U-Boot private data into a separate file. This lets export fw_env.h to be used by external programs that want to change the environment using the library built in tools/env. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Rename aes.h to uboot_aes.hStefano Babic2017-04-126-5/+5
| | | | | | | | | | | | | | | | | | aes.h is a too generic name if this file can be exported and used by a program. Rename it to avoid any conflicts with other files (for example, from openSSL). Signed-off-by: Stefano Babic <sbabic@denx.de>
* | ARCv2: SLC: Make sure busy bit is set properly on SLC flushingAlexey Brodkin2017-04-111-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported in STAR 9001165532, an SLC control reg read (for checking busy state) right after SLC invalidate command may incorrectly return NOT busy causing software to NOT spin-wait while operation is underway. (and for some reason this only happens if L1 cache is also disabled - as required by IOC programming model) Suggested workaround is to do an additional Control Reg read, which ensures the 2nd read gets the right status. Same fix made in Linux kernel: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c70c473396cbdec1168a6eff60e13029c0916854 Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
* | libfdt: fix build with Python 3Stefan Agner2017-04-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | For some reason Python 3 seems to think it does not need to build the library. Using the --force parameter makes sure that the library gets built always. This is especially important since we move the library in the next step of the Makefile, hence forcing a rebuild every time the higher level Makefile triggers a rebuild is required to make sure the library is always there. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
* | fdt: Bring in changes from v1.4.4Simon Glass2017-04-103-12/+17
| | | | | | | | | | | | This a few minor changes down from upstream since the last sync. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge git://git.denx.de/u-boot-x86Tom Rini2017-04-1023-9/+484
|\ \
| * | x86: Introduce minimal PMU driver for Intel MID platformsAndy Shevchenko2017-04-104-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This simple PMU driver allows to tyrn power on and off for selected devices. In particularly Intel Tangier needs to power on SDHCI controllers in order to access to them during board initialization. In the future it might be expanded to cover other Intel MID platforms, that's why it's located under arch/x86/lib and called pmu.c. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: Add SCU IPC driver for Intel MID platformsFelipe Balbi2017-04-105-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Intel MID platforms have few microcontrollers inside SoC, one of them is so called System Controller Unit (SCU). Here is the driver to communicate with microcontroller. Signed-off-by: Vincent Tinelli <vincent.tinelli@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Simon Glass <sjg@chromium.org>
| * | serial: Add serial driver for Intel MIDAndy Shevchenko2017-04-103-0/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a specific serial driver for Intel MID platforms. It has special fractional divider which can be programmed via UART_PS, UART_MUL, and UART_DIV registers. The UART clock is calculated as UART clock = XTAL * UART_MUL / UART_DIV The baudrate is calculated as baud rate = UART clock / UART_PS / DLAB Initialize fractional divider correctly for Intel Edison platform. For backward compatibility we have to set initial DLAB value to 16 and speed to 115200 baud, where initial frequency is 29491200Hz, and XTAL frequency is 38.4MHz. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
| * | tools: binman: Add missing filenames for various x86 rom testsBin Meng2017-04-105-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | With recent changes, some x86-specific rom tests of binman fail to run. Fix it by adding missing filenames in corresponding entries. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | x86: bootm: Fix FIT image booting on x86Stefan Roese2017-04-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Checking 'is_zimage' at this time will always fail and therefore booting a FIT style image will always lead to this error message: "## Kernel loading failed (missing x86 kernel setup) ..." This change now removes this check and booting of FIT images works just fine. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | binman: Remove hard-coded file name for x86 flash-descriptor & intel-meStefan Roese2017-04-102-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have added file names from Kconfig in x86 u-boot.dtsi, update binman to avoid using hard-coded names. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | x86: Add file names from Kconfig in descriptor/intel-me nodes in u-boot.dtsiStefan Roese2017-04-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since we now have the file names configurable via Kconfig for the flash descriptor and intel-me files, add these from Kconfig in the corresponding dts nodes. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | x86: Kconfig: Add options to configure the descriptor.bin / me.bin filenamesStefan Roese2017-04-101-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This introduces two Kconfig options to enable board specific filenames for the Intel binary blobs to be used to generate the SPI flash image. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
View Lorry Controller Status