summaryrefslogtreecommitdiff
path: root/arch/arm/mach-imx/imx8
Commit message (Collapse)AuthorAgeFilesLines
* CONFIG_SPL_SYS_[DI]CACHE_OFF: addTrevor Woerner2019-05-181-1/+1
| | | | | | | | | | | | | While converting CONFIG_SYS_[DI]CACHE_OFF to Kconfig, there are instances where these configuration items are conditional on SPL. This commit adds SPL variants of these configuration items, uses CONFIG_IS_ENABLED(), and updates the configurations as required. Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Trevor Woerner <trevor@toganlabs.com> [trini: Make the default depend on the setting for full U-Boot, update more zynq hardware] Signed-off-by: Tom Rini <trini@konsulko.com>
* imx: support i.MX8QM MEK boardPeng Fan2019-04-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8QM MEK board support. Included a basic dts, enabled SPL FIT Boot log as below: U-Boot SPL 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) Normal Boot Trying to boot from MMC2_2 U-Boot 2019.01-rc1-00029-gf002213219 (Dec 24 2018 - 10:28:30 +0800) CPU: NXP i.MX8QM RevB A53 at 142933 MHz Model: Freescale i.MX8QM MEK Board: iMX8QM MEK Build: SCFW 9330215b Boot: SD1 DRAM: 6 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: Error: ethernet@5b040000 address not set. eth-1: ethernet@5b040000 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8: add cpu supportPeng Fan2019-04-252-0/+8
| | | | | | Add cpu type and Kconfig entry Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8qxp: Fix the reported CPU frequencyFabio Estevam2019-03-131-10/+16
| | | | | | | | | | | | | | | | | Currently the CPU frequency is incorrectly reported: CPU: NXP i.MX8QXP RevB A35 at 147228 MHz Fix this problem by using a direct call to the SCU firmware to retrieve the Cortex A35 CPU frequency. With this change applied the CPU frequency is displayed correctly: CPU: NXP i.MX8QXP RevB A35 at 1200 MHz Tested-by: Marcelo Macedo <marcelo.macedo@nxp.com> Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Andrejs Cainikovs <andrejs.cainikovs@netmodule.com>
* imx8: cpu: restrict checking ROM passover info for revAPeng Fan2019-01-281-17/+22
| | | | | | | | | | | | | | Passover info only for revA. move get_cpu_rev out of CONFIG_CPU to avoid build failure when using get_cpu_rev in SPL. Add a CONFIG_SPL_BUILD for passover usage, no need to execute it again in normal U-Boot stage. Also if still checking passover info in normal U-Boot stage, need to make the passover code executed after arch_cpu_init_dm. So to make it easy and clean, only execute the code for SPL stage. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8: scu: use dedicated MU for SPLPeng Fan2019-01-281-0/+7
| | | | | | | | | SPL runs in EL3 mode, except MU0_A, others are not powered on, and could not be used. However normal U-Boot use MU1_A, so we could not reuse the one in dts. And we could not replace the one in dts with MU0_A, because MU0_A is reserved in secure world. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8qxp: add SUPPORT_SPL optionPeng Fan2019-01-281-0/+1
| | | | | | Enable SUPPORT_SPL option for i.MX8QXP, then we could enable SPL. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8: cpu: correct infoPeng Fan2019-01-091-1/+1
| | | | | | | | | | The CPU banner printed is as following: CPU: CPU: Freescale i.MX8QXP RevB A35 at 147228 MHz 1. Drop the CPU: 2. Change vendor from Freescale to NXP Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx: add i.MX8QXP MEK board supportPeng Fan2018-10-221-0/+13
| | | | | | | | | | | Add i.MX8QXP MEK board support Enabled pinctrl/clk/power-domain/mmc/i2c/fec driver. Added README file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
* imx8: add dummy clockPeng Fan2018-10-221-0/+21
| | | | | | | | | This driver is mostly used to avoid build errors. We use uclass clk driver for clk related operations. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx8: add iomux configuration apiPeng Fan2018-10-222-1/+44
| | | | | | | | Add iomux configuration api. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx8: cpu: add uclass based CPU driverAnatolij Gustschin2018-10-221-76/+139
| | | | | | | | | | | | | print_cpuinfo() in board init code requires uclass CPU driver, add it to be able to display CPU info when CONFIG_DISPLAY_CPUINFO option is enabled. CPU node in DT will have to include 'clocks' and 'u-boot,dm-pre-reloc' properties for generic print_cpuinfo() to work as expected. The driver outputs info for i.MX8QXP Rev A and Rev B CPUs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* imx8: cpu: add function for reading FEC MAC from fuseAnatolij Gustschin2018-10-221-0/+38
| | | | | | | | | FEC driver requires imx_get_mac_from_fuse(). Add it in preparation for ENETx support. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com>
* imx8: add arch_cpu_init arch_cpu_init_dmPeng Fan2018-10-221-1/+52
| | | | | | | | Add arch_cpu_init(_dm) mainly to open the channel between ACore and SCU. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx8: add mmu and dram related functionsPeng Fan2018-10-221-0/+284
| | | | | | | | | | | | Add mmu memmap, some memory regions are reserved by M4, Arm Trusted Firmware, so need to get memreg using SCFW API and setup the memmap. Add dram_init, dram_init_banksize, get_effective_memsize functions, according to the memreg. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx8: implement mmc_get_env_devPeng Fan2018-10-221-0/+32
| | | | | | | | Implement mmc_get_env_dev for i.MX8. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx8: add boot device detectionPeng Fan2018-10-221-0/+85
| | | | | | | | | Add get_boot_device to detect boot device. Add print_bootinfo to print the boot device info. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx8: add basic cpu supportPeng Fan2018-10-222-0/+100
| | | | | | | | | Add basic cpu support, including cpu revision, cpu type, cpu core detection. Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* imx: add Kconfig entry for i.MX8QXPPeng Fan2018-10-221-0/+13
Add Kconfig entry for i.MX8QXP Signed-off-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de>
View Lorry Controller Status