summaryrefslogtreecommitdiff
path: root/board/freescale/common
Commit message (Collapse)AuthorAgeFilesLines
...
* board: common:vid: Add LS1088A VID Supported voltage valuesRajesh Bhagat2018-01-231-0/+38
| | | | | | | | | Adds below voltage values supported by LS1088A Soc: 1.025V(default), 0.9875V, 0.9750V, 0.9V, 1.0V, 1.0125V, 1.0250V. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2018-01-173-7/+11
|\
| * freescale: Ensure common commands are not included in SPL binaryTom Rini2018-01-172-7/+9
| | | | | | | | | | | | | | | | | | | | | | Both the "qixis_reset" and esbc_validate" commands can only be used in full U-Boot so do not build them in SPL. As part of this rework the qixis code to declare things as static and make use of __weak for function aliases. Cc; York Sun <york.sun@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * configs: SECURE_BOOT: Enable CONFIG_CMD_EXT4_WRITESumit Garg2018-01-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | As part of chain of trust with confidentiality along with distro boot, linux kernel image needs to be stored in encrypted form on ext4 boot partition. So enable CONFIG_CMD_EXT4_WRITE in case of Secure boot on ARM based platforms. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | board: freescale: common: add pfuze dm codePeng Fan2018-01-123-0/+85
|/ | | | | | | | Add pfuze dm code, this code could be enabled with CONFIG_DM_PMIC_PFUZE100. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com>
* env: Rename getenv/_f() to env_get()Simon Glass2017-08-162-3/+3
| | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* env: Rename setenv() to env_set()Simon Glass2017-08-163-5/+5
| | | | | | | | We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* fsl-lsch2: csu: correct the workaround A-010315Hou Zhiqiang2017-08-091-10/+10
| | | | | | | | | | | The implementation of function set_pcie_ns_access() uses a wrong argument. The structure array ns_dev has a member 'ind' which is initialized by CSU_CSLX_*. It should use the 'ind' directly to address the PCIe's CSL register (CSL_base + CSU_CSLX_PCIE*). Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> [YS: Revise commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* arm64: ls1043ardb: Add distro secure boot supportSumit Garg2017-08-011-0/+6
| | | | | | | | | | | Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Disable fall back option to nor/qspi boot in case of secure boot. Also enable "secureboot=y" flag in environment for ARM based platforms instead of bootcmd. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Tested-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigSimon Glass2017-07-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-06-031-1/+4
|\
| * armv8: layerscape: Make U-Boot EL2 safeYork Sun2017-06-011-1/+4
| | | | | | | | | | | | | | | | | | When U-Boot boots from EL2, skip some lowlevel init code requiring EL3, including CCI-400/CCN-504, trust zone, GIC, etc. These initialization tasks are carried out before U-Boot runs. This applies to the RAM version image used for SPL boot if PPA is loaded first. Signed-off-by: York Sun <york.sun@nxp.com>
* | dm: Use dm.h header when driver mode is usedSimon Glass2017-06-012-1/+2
|/ | | | | | | | This header includes things that are needed to make driver build. Adjust existing users to include that always, even if other dm/ includes are present Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_CMD_HASH to KconfigSimon Glass2017-05-221-0/+1
| | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_CMD_ESBC_VALIDATE to KconfigSimon Glass2017-05-221-0/+9
| | | | | | | | This converts the following to Kconfig: CONFIG_CMD_ESBC_VALIDATE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* lib: move hash CONFIG options to KconfigTom Rini2017-05-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support using hardware acceleration.") created entries for CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL. However, no defconfig has migrated to it. Complete the move by first adding additional logic to various Kconfig files to select this when required and then use the moveconfig tool. In many cases we can select these because they are required to implement other drivers. We also correct how we include the various hashing algorithms in SPL. This commit was generated as follows (after Kconfig additions): [1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL [2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL Note: We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously because there is dependency between them. Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Steve Rae <steve.rae@raedomain.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_BOARD_INIT to KconfigLey Foon Tan2017-05-221-0/+1
| | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_CMD_BLOB to KconfigSimon Glass2017-04-301-0/+1
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_BLOB Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Add imply CMD_BLOB under CHAIN_OF_TRUST] Signed-off-by: Tom Rini <trini@konsulko.com>
* armv7: ls1021a: Drop macro CONFIG_LS102XAYork Sun2017-04-173-5/+5
| | | | | | Use CONFIG_ARCH_LS1021A instead. Signed-off-by: York Sun <york.sun@nxp.com>
* arm: ls1043ardb: Add SD secure boot targetRuchika Gupta2017-04-171-0/+4
| | | | | | | | | | | | | | | | | | | | - Add SD secure boot target for ls1043ardb. - Implement FSL_LSCH2 specific spl_board_init() to setup CAAM stream ID and corresponding stream ID in SMMU. - Change the u-boot size defined by a macro for copying the main U-Boot by SPL to also include the u-boot Secure Boot header size as header is appended to u-boot image. So header will also be copied from SD to DDR. - CONFIG_MAX_SPL_SIZE is limited to 90KB. SPL is copied to OCRAM (128K) where 32K are reserved for use by boot ROM and 6K for secure boto header. - Error messages during SPL boot are limited to error code numbers instead of strings to reduce the size of SPL image. Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* fsl: Secure Boot: Enable IE (Key extention) FeatureUdit Agarwal2017-03-281-16/+72
| | | | | | | | | | | | | | | | | | | | | | | For validating images from uboot (Such as Kernel Image), either keys from SoC fuses can be used or keys from a verified table of public keys can be used. The latter feature is called IE Key Extension Feature. For Layerscape Chasis 3 based platforms, IE table is validated by Bootrom and address of this table is written in scratch registers 13 and 14 via PBI commands. Following are the steps describing usage of this feature: 1) Verify IE Table in ISBC phase using keys stored in fuses. 2) Install IE table. (To be used across verification of multiple images stored in a static global structure.) 3) Use keys from IE table, to verify further images. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: fsl-lsch3: Update VID supportPriyanka Jain2017-03-141-12/+162
| | | | | | | | | | | | | | VID support in NXP layerscape Chassis-3 (lsch3) compilant SoCs like LS2088A, LS2080A differs from existing logic. -VDD voltage array is different -Registers are different -VDD calculation logic is different Add new function adjust_vdd() for LSCH3 compliant SoCs Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Arpit Goel <arpit.goel@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Freescale/NXP: Migrate CONFIG_FSL_CAAM to defconfigsTom Rini2017-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | In some cases this is absolutely required, so select this for some secure features. This also requires migration of RSA_FREESCALE_EXP Cc: Ruchika Gupta <ruchika.gupta@nxp.com> Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Saksham Jain <saksham.jain@nxp.freescale.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* NXP: Introduce board/freescale/common/Kconfig and migrate CHAIN_OF_TRUSTTom Rini2017-01-241-0/+4
| | | | | | | | | Introduce board/freescale/common/Kconfig so that we have a single place for CONFIG options that are shared between ARM and PowerPC NXP platforms. Cc: York Sun <york.sun@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-01-192-0/+96
|\
| * pmic: pmic_mc34vr500: Add APIs to set/get SWx voltHou Zhiqiang2017-01-182-0/+96
| | | | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | SPL: Adjust more debug prints for ulong entry_pointTom Rini2017-01-111-1/+1
|/ | | | | | | | With entry_point now being an unsigned long we need to adapt the last two debug prints to use %lX not %X. Fixes: 11e1479b9e67 ("SPL: make struct spl_image 64-bit safe") Signed-off-by: Tom Rini <trini@konsulko.com>
* powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCNYork Sun2016-11-231-1/+1
| | | | | | Use TARGET_MPC8641HPCN from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCDYork Sun2016-11-231-1/+1
| | | | | | Use TARGET_MPC8610HPCD from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: P5040DS: Remove macro CONFIG_P5040DSYork Sun2016-11-231-2/+2
| | | | | | Use CONFIG_TARGET_P5040DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: P5020DS: Remove macro CONFIG_P5020DSYork Sun2016-11-231-2/+2
| | | | | | Use CONFIG_TARGET_P5020DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: P4080DS: Remove macro CONFIG_P4080DSYork Sun2016-11-231-2/+2
| | | | | | Use CONFIG_TARGET_P4080DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: P3041DS: Remove macro CONFIG_P3041DSYork Sun2016-11-231-2/+2
| | | | | | Use CONFIG_TARGET_P3041DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: P2041RDB: Remove macro CONFIG_P2041RDBYork Sun2016-11-231-1/+1
| | | | | | Use CONFIG_TARGET_P2041RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: P1022DS: Remove macro CONFIG_P1022DSYork Sun2016-11-231-1/+1
| | | | | | Use CONFIG_TARGET_P1022DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8572DS: Remove macro CONFIG_MPC8572DSYork Sun2016-11-232-2/+2
| | | | | | Use CONFIG_TARGET_MPC8572DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8569MDS: Remove macro CONFIG_MPC8569MDSYork Sun2016-11-231-1/+1
| | | | | | Use CONFIG_TARGET_MPC8569MDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8555CDS: Remove macro CONFIG_MPC8555CDSYork Sun2016-11-231-1/+1
| | | | | | Use CONFIG_TARGET_MPC8555CDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8541CDS: Remove macro CONFIG_MPC8541CDSYork Sun2016-11-231-1/+1
| | | | | | Replace with CONFIG_TARGET_MPC8541CDS from Kconfig. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8536DS: Remove macro CONFIG_MPC8536DSYork Sun2016-11-232-2/+2
| | | | | | Use CONFIG_TARGET_MPC8536DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8544DS: Remove macro CONFIG_MPC8544DSYork Sun2016-11-231-1/+1
| | | | | | Use CONFIG_TARGET_MPC8544DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* powerpc: MPC8548CDS: Remove macro CONFIG_MPC8548CDSYork Sun2016-11-231-1/+1
| | | | | | Use CONFIG_TARGET_MPC8548CDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-10-121-38/+14
|\ | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: include/configs/ls1021aqds.h include/configs/ls1021atwr.h
| * fsl_sec_mon: Update driver for Security MonitorSumit Garg2016-10-061-38/+14
| | | | | | | | | | | | | | | | | | | | | | Update the API's for transition of Security Monitor states. Instead of providing both initial and final states for transition, just provide final state for transition as Security Monitor driver will take care of it internally. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> [York Sun: Reformatted commit message slightly] Reviewed-by: York Sun <york.sun@nxp.com>
* | spi: Move freescale-specific code into a private headerSimon Glass2016-10-061-0/+13
|/ | | | | | | | | | | | | | At present there are two SPI functions only used by freescale which are defined in the spi_flash.h header. One function name matches an existing generic SPL function. Move these into a private header to avoid confusion. Arcturus looks like it does not actually support SPI, so drop the SPI code from that board. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-09-263-19/+86
|\ | | | | | | | | | | | | trini: Drop local memset() from examples/standalone/mem_to_mem_idma2intr.c Signed-off-by: Tom Rini <trini@konsulko.com>
| * armv8: ls1046aqds: Add LS1046AQDS board supportShaohui Xie2016-09-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1046AQDS Specification: ------------------------- Memory subsystem: * 8GByte DDR4 SDRAM (64bit bus) * 128 Mbyte NOR flash single-chip memory * 512 Mbyte NAND flash * 64 Mbyte high-speed SPI flash * SD connector to interface with the SD memory card Ethernet: * Two XFI 10G ports * Two SGMII ports * Two RGMII ports PCIe: supports Gen 1 and Gen 2 SATA 3.0: one SATA 3.0 port USB 3.0: two micro AB connector and one type A connector UART: supports two UARTs up to 115200 bps for console Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * nxp: ls102xa: add LS1 PSCI system suspendHongbo Zhang2016-09-141-1/+34
| | | | | | | | | | | | | | | | The deep sleep function of LS1 platform, is mapped into PSCI system suspend function, this patch adds implementation of it. Signed-off-by: Hongbo Zhang <hongbo.zhang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: csu: add an API to set R/W permission to PCIeHou Zhiqiang2016-09-141-0/+28
| | | | | | | | | | Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * fsl: csu: add an API to set individual device access permissionHou Zhiqiang2016-09-141-14/+20
| | | | | | | | | | | | | | | | Add this API to make the individual device is able to be set to the specified permission. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
View Lorry Controller Status