summaryrefslogtreecommitdiff
path: root/board/sunxi
Commit message (Collapse)AuthorAgeFilesLines
* dm: i2c: use CONFIG_IS_ENABLED macro for DM_I2C/DM_I2C_GPIOIgor Opaniuk2021-02-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_IS_ENABLED() macro, which provides more convenient way to check $(SPL)DM_I2C/$(SPL)DM_I2C_GPIO configs for both SPL and U-Boot proper. CONFIG_IS_ENABLED(DM_I2C) expands to: - 1 if CONFIG_SPL_BUILD is undefined and CONFIG_DM_I2C is set to 'y', - 1 if CONFIG_SPL_BUILD is defined and CONFIG_SPL_DM_I2C is set to 'y', - 0 otherwise. All occurences were replaced automatically using these bash cmds: $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C/if !CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C/if CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C)/CONFIG_IS_ENABLED(DM_I2C)/g' {} + $ find . -type f -exec sed -i 's/ifndef CONFIG_DM_I2C_GPIO/if !CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/ifdef CONFIG_DM_I2C_GPIO/if CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + $ find . -type f -exec sed -i 's/defined(CONFIG_DM_I2C_GPIO)/CONFIG_IS_ENABLED(DM_I2C_GPIO)/g' {} + Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* common: Drop asm/global_data.h from common headerWIP/2021-02-02-drop-asm_global_data-when-unusedSimon Glass2021-02-021-0/+1
| | | | | | | | | | | | Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* sunxi: Add support for OrangePi Zero2Jernej Skrabec2021-01-251-0/+5
| | | | | | | | | | | | | | | | OrangePi Zero2 is SBC based on Allwinner H616 with 1 GiB of RAM, SD card support, gigabit ethernet, micro HDMI, WIFI, Bluetooth and 1 USB 2.0 port. It also has two GPIO headers which allows further peripherals to be used. The devicetree file is taken from v3 of the OrangePi Zero2 Linux submission [1], which it's not yet merged. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2021-January/632084.html Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: add support for R_I2C on H616Jernej Skrabec2021-01-251-0/+4
| | | | | | | | | | This port is needed for communication with PMIC. SPL uses it to set DRAM voltage on H616 boards. Reviewed-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: Add support for AXP305 PMICJernej Skrabec2021-01-251-3/+7
| | | | | | | | | | This PMIC can be found on H616 boards and it's very similar to AXP805 and AXP806. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: Properly check for SATAPWR and MACPWRAndre Przywara2021-01-251-12/+22
| | | | | | | | | | | | | | | | | | The #ifdef CONFIG_xxxPWR conditionals were not working as expected, as string Kconfig symbols are always "defined" from the preprocessor's perspective. This lead to unnecessary calls to the GPIO routines, but also always added a half a second delay to wait for a SATA disk to power up. Many thanks to Peter for pointing this out! Fix this by properly comparing the Kconfig symbols against the empty string. strcmp() would be nicer for this, but GCC does not optimise this away, probably due to our standalone compiler switches. Reported-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Samuel Holland <samuel@sholland.org> # Orange Pi WinPlus Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
* sunxi: Add support for Orange Pi 3Andre Heider2021-01-251-0/+5
| | | | | | | | | | | | | | dts file is taken from Linux 5.11-rc1 tag. The Bluetooth controller of this device ships with a default address, use the new CONFIG_FIXUP_BDADDR option to fix it up. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> [Updated OrangePi 3 DT, rebase and config update] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: Add support for Tanix TX6Jernej Skrabec2021-01-251-0/+6
| | | | | | | | | | | | This commit adds support for Tanix TX6 TV box, based on H6. It's low end H6 board, with 3 GiB of RAM, eMMC, fast ethernet, USB, IR and other peripherals. DT file is taken from Linux 5.11-rc1 release. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: add a config option to fixup a Bluetooth addressAndre Heider2021-01-111-0/+35
| | | | | | | | | | | | | | | Some Bluetooth controllers, like the BCM4345C5 of the Orange Pi 3, ship with the controller default address. Add a config option to fix it up so it can function properly. Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Ondrej Jirman <megous@megous.com> Acked-by: Maxime Ripard <mripard@kernel.org> [rebased] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: extract creating a unique sid into a helper functionAndre Heider2021-01-111-47/+58
| | | | | | | | | | | | Refactor setup_environment() so we can use the created sid for a Bluetooth address too. Signed-off-by: Andre Heider <a.heider@gmail.com> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> [rebased] Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: Move USB ethernet initialization to board_late_init()Andy Shevchenko2021-01-111-0/+5
| | | | | | | | | | | | | For the sake of consistency (*) and order of initialization, i.e. after we have got the ethernet address, interrupt and timer initialized, try to initialize USB ethernet gadget. *) for example, zynqmp uses same order. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: add PineCube boardIcenowy Zheng2021-01-111-0/+5
| | | | | | | | | | | | | | | | | | | | | PineCube is an IP camera development kit released by Pine64. It comes with the following compoents: - A mainboard with Sochip S3 SoC, a 16MByte SPI Flash, AXP209 PMIC, a power-only microUSB connector, a USB Type-A connector, a 10/100Mbps Ethernet port and FPC connectors for camera and daughter board. - An OV5640-based camera module which is connected to the parallel CSI bus of the mainboard. - A daughterboard with several buttons, a SD slot, some IR LEDs, a microphone and a speaker connector. As the device tree is synchronized in a previous commit, just add it to Makefile, create a new MAINTAINER item and provide a defconfig. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: allow to use AXP20[39] attached to I2C0 on V3 seriesIcenowy Zheng2020-11-171-0/+4
| | | | | | | | | | | The reference design of Allwinner V3 series uses an AXP203 or AXP209 PMIC attached to the I2C0 bus of the SoC, although the first community-available V3s board, Lichee Pi Zero, omitted it. Allow to introduce support for the PMIC on boards with it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: a64: Add a defconfig for the PinePhoneSamuel Holland2020-11-171-0/+5
| | | | | | | | | | | | | | | The PinePhone is a smartphone produced by Pine64, with an A64 SoC, 2 or 3 GiB LPDDR3 RAM, 16 or 32 GiB eMMC, 720x1440 MIPI-DSI panel, and Quectel EG25-G modem. There are two main board revisions: 1.1 for early adopters, and 1.2 for mass production. Since there is code to detect the board revision at boot, one config/image can support both boards. Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: Set fdtfile to match the DT chosen by SPLSamuel Holland2020-11-171-2/+11
| | | | | | | | | | | | | | | | | | | Previously, fdtfile was always the value in CONFIG_DEFAULT_DEVICE_TREE. This meant that, regardless of the DT chosen by SPL (either by changing the header in the image or by the selection code at runtime), Linux always used the default DT. By using the name from the SPL header (which, because of the previous commit, always matches the DT used by U-Boot proper), Linux also sees the same board as U-Boot/SPL, even if the boot script later loads a DT from disk. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: remove no longer needed CONFIG_SPL_LOAD_FIT guards] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: Save the chosen DT name in the SPL headerSamuel Holland2020-11-171-1/+27
| | | | | | | | | | | | | | This overwrites the name loaded from the SPL image. It will be different if there was previously no name provided, or if a more accurate name was determined by the board variant selection logic. This means that the DT name in the SPL header now always matches the DT appended to U-Boot. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: move function under CONFIG_SPL_LOAD_FIT guard] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: Add PinePhone DT selection logicSamuel Holland2020-11-171-0/+21
| | | | | | | | | | | | There are two different publicly-released revisions of the PinePhone hardware, versions 1.1 and 1.2; and they need different device trees. Since some GPIO pins were rerouted, we can use that to distinguish between them. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: board: Simplify Pine A64 DT selection logicSamuel Holland2020-11-171-8/+4
| | | | | | | | | | | | | | | Instead of using an entirely separate matching algorithm, simply update the name of the DT we want to match. Enabling this logic does not depend on the FIT config name, only on the initial guess of the board name. Importantly, the initial guess must be "sun50i-a64-pine64-plus", because otherwise the logic would trigger when "sun50i-a64-pine64-lts" was written to the SPL header. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: board: Add a helper to get the SPL DT nameSamuel Holland2020-11-171-9/+19
| | | | | | | | | | | | | | | This moves the validity checking and typecasts all to one place away from the string comparison logic, and it detangles the compile-time and runtime control flow. The new helper will also be used by U-Boot proper in a future commit. Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [Andre: protect new function with CONFIG_SPL_LOAD_FIT] Signed-off-by: Andre Przywara <andre.przywara@arm.com>
* sunxi: board: Use a more descriptive variable nameSamuel Holland2020-11-171-6/+6
| | | | | | | | | | | | | The variable "cmp_str" always leaves me wondering if it is the DT name of the current board (yes) or DT name in the FIT config entry (no). In preparation for expanding the functionality here, rename it to something that obviously means "this is the DT name we are looking for". Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: binman: Add support for including SCP firmwareSamuel Holland2020-10-221-7/+40
| | | | | | | | | | | | | | | | | Allwinner sun50i SoCs contain an OpenRISC 1000 CPU that functions as a System Control Processor, or SCP. ARM Trusted Firmware (ATF) communicates with the SCP over SCPI to implement the PSCI system suspend, shutdown and reset functionality. Currently, SCP firmware is optional; the system will boot and run without it, but system suspend will be unavailable. Since all communication with the SCP is mediated by ATF, the only thing U-Boot needs to do is load the firmware into SRAM. The SCP firmware occupies the last 16KiB of SRAM A2, immediately following ATF. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: Drop the FIT-generator scriptSimon Glass2020-09-221-87/+0
| | | | | | This file is no-longer used. Drop it. Signed-off-by: Simon Glass <sjg@chromium.org>
* board: sunxi: change trace level for phy errors managed by uclassPatrick Delaunay2020-09-081-1/+1
| | | | | | | As the error message is now displayed by generic phy functions, the pr_err can be change to pr_idebug. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* treewide: convert bd_t to struct bd_info by coccinelleMasahiro Yamada2020-07-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux coding style guide (Documentation/process/coding-style.rst) clearly says: It's a **mistake** to use typedef for structures and pointers. Besides, using typedef for structures is annoying when you try to make headers self-contained. Let's say you have the following function declaration in a header: void foo(bd_t *bd); This is not self-contained since bd_t is not defined. To tell the compiler what 'bd_t' is, you need to include <asm/u-boot.h> #include <asm/u-boot.h> void foo(bd_t *bd); Then, the include direcective pulls in more bloat needlessly. If you use 'struct bd_info' instead, it is enough to put a forward declaration as follows: struct bd_info; void foo(struct bd_info *bd); Right, typedef'ing bd_t is a mistake. I used coccinelle to generate this commit. The semantic patch that makes this change is as follows: <smpl> @@ typedef bd_t; @@ -bd_t +struct bd_info </smpl> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* common: Drop linux/delay.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop log.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop init.h from common headerSimon Glass2020-05-182-0/+2
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* common: Drop image.h from common headerSimon Glass2020-05-181-0/+1
| | | | | | Move this uncommon header out of the common header. Signed-off-by: Simon Glass <sjg@chromium.org>
* sunxi: Add Libre Computer ALL-H5-CC H5 boardChen-Yu Tsai2020-01-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | The Libre Computer ALL-H5-CC board is an upgraded version of the ALL-H3-CC. Changes include: - Gigabit Ethernet via external RTL8211E Ethernet PHY - 16 MiB SPI NOR flash memory - PoE tap header - Line out jack removed Only H5 variant test samples were made available, and the vendor is not certain whether other SoC variants would be made or not. Furthermore the board is a minor upgrade compared to the ALL-H3-CC. Thus the device tree simply includes the one for the ALL-H3-CC, and adds the changes on top. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: Add Libre Computer ALL-H3-IT H5 boardChen-Yu Tsai2020-01-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Libre Computer ALL-H3-IT board is a small single board computer that is roughly the same size as the Raspberry Pi Zero, or around 20% smaller than a credit card. The board features: - H2, H3, or H5 SoC from Allwinner - 2 DDR3 DRAM chips - Realtek RTL8821CU based WiFi module - 128 Mbit SPI-NOR flash - micro-SD card slot - micro HDMI video output - FPC connector for camera sensor module - generic Raspberri-Pi style 40 pin GPIO header - additional pin headers for extra USB host ports, ananlog audio and IR receiver Only H5 variant test samples were made available, but the vendor does have plans to include at least an H3 variant. Thus the device tree is split much like the ALL-H3-CC, with a common dtsi file for the board design, and separate dts files including the common board file and the SoC dtsi file. The other variants will be added as they are made available. The device tree was synced over from the Linux kernel, along with other H3/H5 changes, in a previous patch. Thus only the defconfig and an entry to the MAINTAINERS file is added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: drop CONFIG_SYS_SPI_U_BOOT_OFFS] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* common: Move hang() to the same header as panic()Simon Glass2020-01-241-0/+1
| | | | | | | | | | At present panic() is in the vsprintf.h header file. That does not seem like an obvious choice for hang(), even though it relates to panic(). So let's put hang() in its own header. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Migrate a few more files] Signed-off-by: Tom Rini <trini@konsulko.com>
* common: Move RAM-sizing functions to init.hSimon Glass2020-01-241-0/+1
| | | | | | | These functions relate to memory init so move them into the init header. Signed-off-by: Simon Glass <sjg@chromium.org>
* sun8i: h3: Support H3 variant of Orange Pi Zero Plus 2Diego Rondini2019-12-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Orangepi Zero Plus 2 is an open-source single-board computer, available in two Allwinner SOC variants, H3 and H5. We add support for H3 variant here, as the H5 is already supported. H3 Orangepi Zero Plus 2 has: - Quad-core Cortex-A7 - 512MB DDR3 - microSD slot and 8GB eMMC - Debug TTL UART - HDMI - Wifi + BT - OTG + power supply Sync dts from linux v5.2 commit: "ARM: dts: sunxi: h3/h5: Remove stale pinctrl-names entry" (sha1: 75f9a058838be9880afd75c4cb14e1bf4fe34a0b) Commit: "ARM: dts: sun8i: h3: Refactor the pinctrl node names" (sha1: a4dc791974e568a15f7f37131729b1a6912f4811) has been avoided as it breaks U-Boot build. Signed-off-by: Diego Rondini <diego.rondini@kynetics.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal2019-12-031-1/+1
| | | | | | | | | Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* crc32: Use the crc.h header for crc functionsSimon Glass2019-12-021-0/+1
| | | | | | | | | | | Drop inclusion of crc.h in common.h and use the correct header directly instead. With this we can drop the conflicting definition in fw_env.h and rely on the crc.h header, which is already included. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* arm64: dts: sun50i: Add support for A64 OLinuXino (with eMMC)Sunil Mohan Adapa2019-10-251-0/+5
| | | | | | | | | | | | | | | | | | | | | | | A64 OLinuXino board from Olimex has three variants with onboard eMMC: A64-OLinuXino-1Ge16GW, A64-OLinuXino-1Ge4GW and A64-OLinuXino-2Ge8G-IND. In addition, there are two variants without eMMC. One without eMMC and one with SPI flash. This suggests the need for separate device tree for the three eMMC variants. The Linux kernel upstream has chosen to create and use a separate device tree for the eMMC variants instead of adding eMMC support existing device tree. These changes to Linux kernel are queued for Linux 5.4. commit <02bb66b347ff8115f53948f86b884e008ba385b9> ("arm64: dts: allwinner: a64: Add A64 OlinuXino board (with eMMC)") This patch has been tested on A64-OLinuXino-1Ge16GW and is based on Linux device-tree and a64-olinuxino_defconfig. Signed-off-by: Sunil Mohan Adapa <sunil@medhas.org> [jagan: updated linux-next commit details] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* MAINTAINERS: Update my email addressMaxime Ripard2019-10-061-3/+3
| | | | | | I'm not at bootlin anymore, and my mail address doesn't work any longer. Signed-off-by: Maxime Ripard <mripard@kernel.org>
* env: Rename environment.h to env_internal.hSimon Glass2019-08-111-1/+1
| | | | | | | | | | | | | | This file contains lots of internal details about the environment. Most code can include env.h instead, calling the functions there as needed. Rename this file and add a comment at the top to indicate its internal nature. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fixup apalis-tk1.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* env: Move env_set_hex() to env.hSimon Glass2019-08-111-0/+1
| | | | | | | | Move env_set_hex() over to the new header file along with env_set_addr() which uses it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* sun8i: h3: Add support for the Beelink-x2 STBMarcus Cooper2019-07-151-0/+6
| | | | | | | | | | | | | | The Beelink X2 is an STB based on the Allwinner H3 SoC with a uSD slot, 2 USB ports( 1 * USB-2 Host, 1 USB OTG), a 10/100M ethernet port using the SoC's integrated PHY, Wifi via an sdio wifi chip, HDMI, an IR receiver, a dual colour LED and an optical S/PDIF connector. Linux commit details about the sun8i-h3-beelink-x2.dts sync: "ARM: dts: sun8i: h3: Add ethernet0 alias to Beelink X2" (sha1: cc4bddade114b696ab27c1a77cfc7040151306da) Signed-off-by: Marcus Cooper <codekipper@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sun50i: a64: Add Olimex A64-Teres-I board initial supportJonas Smedegaard2019-05-091-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Olimex A64-Teres-I board is a mainboard (the only one so far) for Olimex Teres-I DIY laptop kit. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - MicroSD Slot - 16GB eMMC Flash - eDP LCD display - HDMI - USB Host - Battery management - 5V DC power supply - Certified Open Source Hardware (OSHW) Works: - i2C - MMC/SD - PWM backlight Known broken: - Internal keyboard (seems to be because the keyboard firmware loads a bootloader first, and then disconnects bootloader and connect real keyboard). External ones connected to the USB port work fine. This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree). Linux commit details about the sun50i-a64-teres-i.dts sync: "arm64: dts: allwinner: a64: Rename uart0_pins_a label to uart0_pb_pins" (sha1: d91ebb95b96c8840932dc3a10c9f243712555467) Cosmetic warnings regarding whitespace and placement of SPDX notice for dts file was ignored. config and .dtsi file are adapted from pinebook files. Tested-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Jonas Smedegaard <dr@jones.dk> Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> [jagan: move board entry in MAINTAINERS file at proper position] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: dts: h6: Add Beelink GS1 initial supportClément Péron2019-04-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | Beelink GS1 is an Allwinner H6 based TV box, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 2GB LPDDR3 RAM - 16GB eMMC - AXP805 PMIC - 1Gbps GMAC via RTL8211E - USB 2.0 and 3.0 Host - HDMI port - S/PDIF port - 5V/2A DC power supply - Wi-Fi/BT via Fn-Link 6222B-SRB (RTL8222BS) Linux commit details about the sun50i-h6-beelink-gs1.dts sync: "arm64: dts: allwinner: h6: Introduce Beelink GS1 board" (sha1: 089bee8dd119ba084dee6b17a2e1a53df4f30193) Signed-off-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: update SATA driver to always use DM_SCSIAndre Przywara2019-04-172-138/+0
| | | | | | | | | | | | | | | | | | | | It seems like the Allwinner SATA driver is already quite capable of using the driver model, so we can force this on all boards and can remove support for a non-DM_SCSI build. This removes the warning about boards with SATA ports not being DM_SCSI compliant. It also takes the opportunity to move the driver out of the board/sunxi directory to join its siblings in drivers/ata, and to make it a proper Kconfig citizen. The board defconfigs stay untouched. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jagan@openedev.com> [jagan: select DM_SCSI separately] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* board: sunxi: Add R40 sata compatibleJagan Teki2019-04-171-0/+1
| | | | | | | Add sata compatible for R40. Cc: Pablo Sebastián Greco <pgreco@centosproject.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* board: sunxi: gmac: Remove Ethernet clock and resetJagan Teki2019-04-161-8/+0
| | | | | | | | Since Ethernet clock and reset is now handling via CLK and RESET frameworks via driver API's remove explicit ccm writes. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* Merge branch 'master' of git://git.denx.de/u-boot-spiTom Rini2019-04-141-1/+1
|\ | | | | | | | | | | | | | | | | Conflicts: arch/arm/dts/armada-385-amc.dts arch/arm/dts/armada-xp-theadorable.dts arch/arm/dts/stm32mp157c-ev1-u-boot.dtsi Signed-off-by: Tom Rini <trini@konsulko.com>
| * MAINTAINERS: Change Jagan's email addressJagan Teki2019-04-121-1/+1
| | | | | | | | | | | | | | Missed few mails from openedev, since most of the day I look at amarulasolutions mail so update the same. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | sun50i: a64: Add Oceanic 5205 5inMFD initial supportJagan Teki2019-04-101-0/+5
|/ | | | | | | | | | | | | | | | | | | | | | | | | Oceanic 5205 5inMFD is a 5 inch Multi function display baseboard designed to mount SoPine SOM. Key features: - Allwinner A64 Cortex-A53 - Mali-400MP2 GPU - AXP803 PMIC - 2GB DDR3 RAM - SD Slot - SPI-NOR flash - EMAC, RTL8211E - MCP2515 CAN - 4-lane, MIPI-DSI panel - Goodix 911 CTP - USB Host - 12V DC power supply Linux commit details about the sun50i-a64-oceanic-5205-5inmfd.dts sync: "arm64: allwinner: a64: Add Oceanic 5205 5inMFD initial support" (sha1: 00f7980a3bd53d12abc34f68146a8eed0e894248) Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* sunxi: Add Bananapi M2+ H5 boardChen-Yu Tsai2019-02-181-1/+2
| | | | | | | | | | | | | | | | As the H5 is pin compatible with the H3, vendors tend to upgrade their existing H3 products with an H5 SoC swap. This is the case with the Bananapi M2+ H5. Add the following to support it: - device tree file: synced from Linux v5.0-rc1, - defconfig: copy of bananapi_m2_plus_h3_defconfig with only SoC family and default device tree file name changed - MAINTAINERS entry Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* sunxi: Rename Sinovoip BPI M2 Plus to Bananapi M2 Plus H3Chen-Yu Tsai2019-02-181-5/+6
| | | | | | | | | | | | | | | | | | | | | The brand Sinovoip is used for Sinovoip's original VOIP products, while the Bananapi brand is for the single board computers they produce. This has been verified by Bananapi. Rename the board from "Sinovoip BPI M2 Plus" to "Bananapi M2 Plus". For the defconfig file, all lowercase is used. To support the H5 variant of this board, the "H3" suffix is added to the defconfig name. Also add myself as one of the board maintainers. As the device tree files were already correctly named, they do not require any changes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> [jagan: removed unneeded message from commit body] Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
View Lorry Controller Status