summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-10-271-0/+1
|\
| * armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_IDAshish Kumar2017-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID PHY_INTERFACE_MODE_RGMII_TXID. These change where introduced in phy driver in commit 05b29aa0cb68 ("net: phy: realtek: fix enabling of the TX-delay for RTL8211F"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | omap4: sdp4430: match the #endif comment to #ifdefMasahiro Yamada2017-10-271-1/+1
|/ | | | | | | | | This comment creates a wrong entry in config_whitelist.txt. I did not touch config_whitelist.txt - the CONFIG will be dropped by the next re-sync. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* net: Add SMC911X driver to Kconfig, convertAdam Ford2017-10-201-1/+2
| | | | | | | | | | | | | We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
* x86: baytrail: fsp: Move Azalia update codes to boardBin Meng2017-10-191-0/+111
| | | | | | | | | | | | | Azalia configuration may be different across boards, hence it's not appropriate to do that in the SoC level. Instead, let's make the SoC update_fsp_azalia_configs() routine as a weak version, and do the actual work in the board codes. So far it seems only som-db5800-som-6867 board enables the Azalia. Move the original codes into som-db5800-som-6867.c. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
* Drop CONFIG_HAS_DATAFLASHTuomas Tynkkynen2017-10-1616-204/+0
| | | | | | | | Last user of this option went away in commit: fdc7718999 ("board: usb_a9263: Update to support DT and DM") Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-10-124-11/+131
|\
| * armv8: ls1043ardb: Use static DDR setting for SPL bootYork Sun2017-10-092-0/+115
| | | | | | | | | | | | | | This board has soldered DDR chips. To reduce the SPL image size, use static DDR setting instead of dynamic DDR driver. Signed-off-by: York Sun <york.sun@nxp.com>
| * armv8: ls1088a: Update MC boot sequenceBogdan Purcareata2017-10-092-11/+16
| | | | | | | | | | | | | | | | | | | | The MC boot sequence is contained in mc_env_boot. Update LS1088A boards to use this function, and hook it to reset_phy so that it's called late enough, after the ports have been initialized, for proper DPC / DPL fixup. Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | ARM: imx6: Add DHCOM i.MX6 PDK board supportMarek Vasut2017-10-125-0/+866
| | | | | | | | | | | | | | | | | | | | Add support for the DHCOM i.MX6 PDK board. This board has: - FEC ethernet - EHCI USB host - 3x SDMMC Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | i.mx6ul: xpress: update UART init for current board revisionAnatolij Gustschin2017-10-121-4/+10
| | | | | | | | | | | | | | | | | | UART pinmux has been changed on the last board revision. Change board pinmux accordingly. Console is on UART7 now, add pinmux, base address and update console string in environment. Signed-off-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | wandboard: Add support for the latest revd1 revisionFabio Estevam2017-10-121-5/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Latest wandboard hardware revision is revd1, which brings the following new features: - PFUZE100 PMIC - AR8035 Ethernet PHY - Upgrade Wifi/BT chip to BCM4339/BCM43430. The detection mechanism is to probe the PMIC and when it is found, then the revision of the board is revd1. As the detection is done via PMIC, we need to print the board version at a later stage via CONFIG_DISPLAY_BOARDINFO_LATE and also need to disable CONFIG_DISPLAY_BOARDINFO, which is done much earlier. Make the necessary adjustments for the AR8035 PHY to work on revd1. Based on Richard Hu's work from Technexion's U-Boot tree. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | arm: imx7d: add support for Compulab cl-som-imx7Ilya Ledvich2017-10-128-0/+813
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial support for Compulab cl-som-imx7 SoM. The initial support includes: - MMC - eMMC - SPI flash - I2C - FEC - USB - Serial console Signed-off-by: Ilya Ledvich <ilya@compulab.co.il>
* | icorem6_rqs: env: Return mmc devnoJagan Teki2017-10-121-2/+1
| | | | | | | | | | | | | | | | | | Instead of changing mmc devno from dts nodes better to return the detected devno so-that env trigger the same. Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | mx6sabresd: Include <usb/ehci-ci.h> header fileDiego Dorta2017-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:586:5: warning: no previous prototype for ‘board_ehci_hcd_init’ [-Wmissing-prototypes] int board_ehci_hcd_init(int port) Remove this warning by including <usb/ehci-ci.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
* | mx6sabresd: Include <asm/mach-imx/spi.h> header fileDiego Dorta2017-10-121-0/+1
| | | | | | | | | | | | | | | | | | | | When compiling with W=1 the following warning is observed: board/freescale/mx6sabresd/mx6sabresd.c:680:5: warning: no previous prototype for ‘board_spi_cs_gpio’ [-Wmissing-prototypes] int board_spi_cs_gpio(unsigned bus, unsigned cs) Remove this warning by including <asm/mach-imx/spi.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com>
* | imx: Include <input.h> header fileDiego Dorta2017-10-1215-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | When building with W=1 errors like the one below is seen: board/freescale/mx6sabresd/mx6sabresd.c:546:5: warning: no previous prototype for ‘overwrite_console’ [-Wmissing-prototypes] int overwrite_console(void) Fix the build warnings by including <input.h>. Signed-off-by: Diego Dorta <diego.dorta@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* | colibri_imx6: Avoid calling setup_display() from SPL codeFabio Estevam2017-10-121-3/+4
| | | | | | | | | | | | | | | | There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | apalis_imx6: Avoid calling setup_display() from SPL codeFabio Estevam2017-10-121-4/+4
| | | | | | | | | | | | | | | | There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | mx6cuboxi: Avoid calling setup_display() from SPL codeFabio Estevam2017-10-121-7/+8
| | | | | | | | | | | | | | | | | | There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | wandboard: Avoid calling setup_display() from SPL codeFabio Estevam2017-10-121-3/+2
| | | | | | | | | | | | | | | | | | There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | cgtqmx6eval: Avoid calling setup_display() from SPL codeFabio Estevam2017-10-121-2/+2
| | | | | | | | | | | | | | | | | | There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | mx6sabresd: Avoid calling setup_display() from SPL codeFabio Estevam2017-10-121-3/+3
| | | | | | | | | | | | | | | | | | There is no need call setup_display() from SPL code, so move it to board_init(), which executes only in U-Boot proper. Reported-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2017-10-103-240/+34
|\ \
| * | ARM: rmobile: Fixup ULCB CPLD support after PFC reworkMarek Vasut2017-10-101-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ULCB CPLD support was not updated during the PFC table rework, fix up the GPIO numbers until the CPLD support is rewritten to a proper DM capable and DT probing driver. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Zap ad-hoc PFC and GPIO setup in board filesMarek Vasut2017-09-282-197/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At long last, nuke all this ad-hoc setup in board files in favor of letting PFC pinmux and GPIO drivers do the same job, but based on DT description of the hardware rather than this board-file ugliness. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Switch to DM PFC pinmux and GPIO driverMarek Vasut2017-09-282-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the PFC pinmux and GPIO drivers and disable the SH GPIO combo driver. This allows the drivers to obtain pinmux and GPIO configuration from DT rather than hard-coding it in board files. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove SCIF clock configuration from board filesMarek Vasut2017-09-242-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The configuration is now fully performed by the SCIF and clk drivers, so remove it from the board file. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove AVB clock configuration from board filesMarek Vasut2017-09-242-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The configuration is now fully performed by the AVB and clk drivers, so remove it from the board file. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Remove SD clock configuration from board filesMarek Vasut2017-09-242-35/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The configuration is now fully performed by the SD and clk drivers, so remove it from the board file. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Move HSUSB configuration to board on ULCBMarek Vasut2017-09-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use ehci-generic driver, move the configuration of HSUSB block into the board file. This configuration should not have been in the Gen3 EHCI USB driver in the first place, so move it to the board file until there is a proper infrastructure and driver for the HSUSB block. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Move HSUSB configuration to board on Salvator-XMarek Vasut2017-09-121-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In order to use ehci-generic driver, move the configuration of HSUSB block into the board file. This configuration should not have been in the Gen3 EHCI USB driver in the first place, so move it to the board file until there is a proper infrastructure and driver for the HSUSB block. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | Merge git://git.denx.de/u-boot-videoTom Rini2017-10-096-460/+30
|\ \ \
| * | | board: at91sam9x5ek: Convert to CONFIG_DM_VIDEOWenyou Yang2017-09-291-104/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | board: sama5d4_xplained: Convert to CONFIG_DM_VIDEOWenyou Yang2017-09-292-97/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | board: sama5d4ek: Convert to CONFIG_DM_VIDEOWenyou Yang2017-09-291-91/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | board: sama5d3xek: Convert to CONFIG_DM_VIDEOWenyou Yang2017-09-291-80/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | | board: sama5d2_xplained: Convert to CONFIG_DM_VIDEOWenyou Yang2017-09-291-88/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Convert the board to support the video driver model, add the device tree node, and remove the unnecessary code. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | Merge git://git.denx.de/u-boot-x86Tom Rini2017-10-074-0/+23
|\ \ \ \
| * | | | x86: edison: Bring minimal ACPI support to the boardAndy Shevchenko2017-10-074-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is based on Intel Tangier SoC (Intel Merrifield platform) and may utilize ACPI powerfulness. Bring minimum support by appending initial DSDT table for it. Note, the addresses for generated tables are carefully chosen to avoid any conflicts with existing shadowed BIOS data. The user have somewhat like ~31 kB available for compiled ACPI tables that ought to be enough. Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
* | | | | ARM: Add a new arch + board for QEMU's 'virt' machineTuomas Tynkkynen2017-10-063-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board builds an U-Boot binary that is bootable with QEMU's 'virt' machine on ARM. The minimal QEMU command line is: qemu-system-arm -machine virt,highmem=off -bios u-boot.bin (Note that the 'highmem=off' parameter to the 'virt' machine is required for PCI to work in U-Boot.) This command line enables the following: - u-boot.bin loaded and executing in the emulated flash at address 0x0 - A generated device tree blob placed at the start of RAM - A freely configurable amount of RAM, described by the DTB - A PL011 serial port, discoverable via the DTB - An ARMv7 architected timer - PSCI for rebooting the system - A generic ECAM-based PCI host controller, discoverable via the DTB Additionally, QEMU allows plugging a bunch of useful peripherals to the PCI bus. The following ones are supported by both U-Boot and Linux: - To add a Serial ATA disk via an Intel ICH9 AHCI controller, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device ich9-ahci,id=ahci -device ide-drive,drive=mydisk,bus=ahci.0 - To add an Intel E1000 network adapter, pass e.g.: -net nic,model=e1000 -net user - To add an EHCI-compliant USB host controller, pass e.g.: -device usb-ehci,id=ehci - To add a NVMe disk, pass e.g.: -drive if=none,file=disk.img,id=mydisk -device nvme,drive=mydisk,serial=foo Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | | | dts: renamed FIT_EMBED to MULTI_DTB_FIT and moved it to the dts KconfigJean-Jacques Hiblot2017-10-054-4/+4
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FIT_EMBED might be confused with CONFIG_OF_EMBED, rename it MULTI_DTB_FIT as it is able to get a DTB from a FIT image containing multiple DTBs. Also move the option to the Kconfig dedicated to the DTS options and create a README for this feature. Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | | | Merge git://git.denx.de/u-boot-sunxiTom Rini2017-10-054-20/+24
|\ \ \ \
| * | | | sunxi: only init USB Ethernet gadget when it's enabledIcenowy Zheng2017-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the USB Ethernet gadget is not yet enabled, the call of usb_ether_init in board/sunxi/board.c will lead to undefined reference error when building. Fix this problem. Fixes: 50ddbf1199a0 ("sunxi: Register usb_ether") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | | sun7i: a20: Add Bananapi M1 Plus supportJagan Teki2017-10-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Banana Pi M1 Plus is an open-source single-board computer that adds more connectivity to the classic board using Allwinner A20 SOC. Bananapi M1-Plus features: - A20 Dual-core 1.0GHz - 1 GB DDR3 SDRAM - MicroSD - 10/100/1000 Ethernet RJ45 - WiFi b/g/n - 5V DC Micro USB power-supply For dts file, Sync with Linux commit f92ca09("Merge branch 'akpm/master'"). Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * | | | sunxi: Remove the MMC index hackMaxime Ripard2017-10-031-14/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current code, if there's both an eMMC and an MMC slot available on the board, will swap the MMC indices based on whether we booted from the eMMC or the MMC. This way, the MMC we're supposed to boot on will always have the index 0. However, this causes various issues, for example when using other components that base their behaviour on the MMC index, such as fastboot. Let's remove that hack, and take the opposite approach. The MMC will always have the same index, but the bootcmd will pick the same device than the one we booted from. This is done through the introduction of the mmc_bootdev environment variable that will be filled by the board code based on the boot device informations we can get from the SoC. In order to not introduce regressions, we also need to adjust the fastboot MMC device and the environment device in order to set it to the eMMC, over the MMC, like it used to be the case. Tested-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | | sunxi: Use sunxi_get_boot_deviceMaxime Ripard2017-10-031-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Our current board code duplicates a bit the sunxi_get_boot_device logic. Now that we can use that function in the full-flavoured U-Boot, remove that duplication and call the function instead. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | | sunxi: Register usb_etherMaxime Ripard2017-10-031-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Call the function to register the usb_ether gadget in the board. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | | musb: sunxi: switch to the device modelMaxime Ripard2017-10-031-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device model was implemented so far using a hook that needed to be called from the board support, without DT support and only for the host. Switch to probing both in peripheral and host mode through the DT. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | | usb: gadget: Make g_dnl USB settings commonMaxime Ripard2017-10-032-4/+4
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The g_dnl USB settings for the vendor ID, product ID and manufacturer are actually common settings that can and should be shared by all the gadgets. Make them common by renaming them, and convert all the users. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
View Lorry Controller Status