summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'u-boot-amlogic-20190731' of ↵WIP/31Jul2019Tom Rini2019-07-315-0/+290
|\ | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
| * board: amlogic: add support for Odroid-N2Neil Armstrong2019-07-315-0/+290
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
* | Revert "ARM: davinci: da850: Manual pinmux only when PINCTRL not available"Adam Ford2019-07-311-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 877ab2423bc257045a06bc23d4b9440b82bda6fb. The above patch was designed to shrink code by only pin-muxing items needed for SPL in SPL and relying on driver model or SPL to mux other items. Unfortunately, da850evm_direct_nor doesn't use SPL so items that were only muxed during SPL are not muxed causing the board to no longer boot. Signed-off-by: Adam Ford <aford173@gmail.com>
* | ARM: da850-evm: Remove references to CONFIG_DA850_AM18X_EVMAdam Ford2019-07-311-3/+0
| | | | | | | | | | | | | | | | With the removal of da850_am18xxevm, there is at least one whitelisted CONFIG option that can be deleted. This patch removes CONFIG_DA850_AM18X_EVM since it's not required any more Signed-off-by: Adam Ford <aford173@gmail.com>
* | Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini2019-07-308-3/+995
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
| * | arm64: zynqmp: Do not include pm_cfg_obj.o when SPL is disabledMichal Simek2019-07-301-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xilinx_zynqmp_mini configuration is throwing build error: readlink: missing operand Try 'readlink --help' for more information. because CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE is not defined at all and Makefile pass ifneq condition. Add SPL_BUILD dependency which is also reflected in Kconfig. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: add MAINTAINERS entry for Avnet UltraZed-EVLuca Ceresoli2019-07-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board was added without adding a MAINTAINERS entry. Fixes: $ ./tools/genboardscfg.py -f WARNING: no status info for 'avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0' WARNING: no maintainers for 'avnet_ultrazedev_cc_v1_0_ultrazedev_som_v1_0' $ Reported-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: add support for Avnet UltraZed-EV Starter KitLuca Ceresoli2019-07-301-0/+663
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avnet UltraZed-EV Starter Kit is composed by the UltraZed-EV SoM and the only publicly-available compatible carrier card. The SoM is based on the EV version of the Xilinx ZynqMP SoC+FPGA. The psu_init_gpl.c file has been generated from the board definition files at [0] using Vivado 2018.3 and then minimized by tools/zynqmp_psu_init_minimize.sh. Manually removed serdes init code since it is not mentioned in device tree and fixed a checkpatch error. [0] https://github.com/Avnet/bdf/tree/3686c9ff7d2f0467fb4fcf39f861b8d6ff183b12/ultrazed_7ev_cc/1.1 Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | ARM: zynq: Add configuration for Z-turn boardAnton Gerasimov2019-07-301-0/+281
| | | | | | | | | | | | | | | | | | | | | Basic (PS-only) configuration based on Vivado board files by Sergiusz Bazanski <sergius@q3k.org> Signed-off-by: Anton Gerasimov <tossel@gmail.com>
| * | arm64: zynqmp: xil_io.h: declare functions as staticLuca Ceresoli2019-07-301-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes sparse warnings when building zynqmp defconfigs: ./board/xilinx/zynqmp/xil_io.h:12:6: warning: symbol 'Xil_Out32' was not declared. Should it be static? ./board/xilinx/zynqmp/xil_io.h:17:5: warning: symbol 'Xil_In32' was not declared. Should it be static? ./board/xilinx/zynqmp/xil_io.h:22:6: warning: symbol 'usleep' was not declared. Should it be static? Also add __maybe_unused to usleep() since it is not used by minimized psu_init_gpl.c files, so it would warn as "defined but not used". Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | arm64: zynqmp: spl: install a PMU firmware config object at runtimeLuca Ceresoli2019-07-304-0/+40
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Optionally allow U-Boot to load a configuration object into the Power Management Unit (PMU) firmware on Xilinx ZynqMP. The configuration object is required by the PMU FW to enable most SoC peripherals. So far the only way to boot using U-Boot SPL was to hard-code the configuration object in the PMU firmware. Allow a different boot process, where the PMU FW is equal for any ZynqMP chip and its configuration is passed at runtime by U-Boot SPL. All the code for Inter-processor communication with the PMU is isolated in a new file (pmu_ipc.c). The code is inspired by the same feature as implemented in the Xilinx First Stage Bootloader (FSBL) and Arm Trusted Firmware: * https://github.com/Xilinx/embeddedsw/blob/fb647e6b4c00f5154eba52a88b948195b6f1dc2b/lib/sw_apps/zynqmp_fsbl/src/xfsbl_misc_drivers.c#L295 * https://github.com/ARM-software/arm-trusted-firmware/blob/c48d02bade88b07fa7f43aa44e5217f68e5d047f/plat/xilinx/zynqmp/pm_service/pm_api_sys.c#L357 SPL logs on the console before loading the configuration object: U-Boot SPL 2019.07-rc1-00511-gaec224515c87 (May 15 2019 - 08:43:41 +0200) Loading PMUFW cfg obj (2008 bytes) EL Level: EL3 ... Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2019-07-301-0/+49
|\ \ | |/ |/|
| * ARM: renesas: Update Gen3 PCIe dma-ranges before bootMarek Vasut2019-07-231-0/+49
| | | | | | | | | | | | | | | | | | Update "dma-ranges" DT property of all PCIe controllers in the system with the up-to-date DRAM layout. This allows the PCIe controller take full advantage of all the available DRAM. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | Merge branch '2019-07-29-ti-imports'Tom Rini2019-07-293-9/+17
|\ \ | | | | | | | | | | | | - More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
| * | davinci: omapl138-lcdk: enable driver-model in SPLBartosz Golaszewski2019-07-291-0/+16
| | | | | | | | | | | | | | | | | | | | | Enable CONFIG_SPL_DM and enable the driver model for serial by defining an appropriate device in the board file for da850-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
| * | davinci: omapl138-lcdk: remove unneeded includesBartosz Golaszewski2019-07-291-2/+0
| | | | | | | | | | | | | | | | | | There's no SPI on da850-lcdk. Remove unnecessary includes. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
| * | ARM: da850_am18xxevm: Remove config and referencesAdam Ford2019-07-292-7/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board has been abandonded for a while. I do not have this hardware and nobody has appeared to notice and/or care that it's orphaned. Since much of this code is inserted into the da850evm code base, removing it from support will make da850evm support easier going forward. This patch removes the da850_am18xxevm_defconfig, README references to this board and the reference to this board from the MAINTAINERS list. Signed-off-by: Adam Ford <aford173@gmail.com>
* | | Merge branch '2019-07-29-master-imports'Tom Rini2019-07-294-0/+33
|\ \ \ | | | | | | | | | | | | - Assorted bug fixes
| * | | board: mediatek: Add pumpkin board supportFabien Parent2019-07-294-0/+33
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
* | | Merge tag 'video-for-2019.10' of ↵Tom Rini2019-07-295-11/+19
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
| * | | video: fsl_dcu_fb: add DM_VIDEO supportIgor Opaniuk2019-07-291-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the driver to build with DM_VIDEO enabled. DTS files must additionally include 'u-boot,dm-pre-reloc' property in soc and child nodes to enable driver binding to fsl_dcu_fb device. Currently display timings aren't obtained from DT. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
| * | | video: fsl_dcu_fb: refactor init functionsIgor Opaniuk2019-07-294-10/+16
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move dcu-related code to fsl_dcu_probe_common, keep in video_hw_init() only legacy video stack (filling GraphicPanel struct etc.). Add wrappers for all init functions, that will let to provide struct fb_info as an additional param (needed for further moving it from the global scope to driver private data struct in DM converted driver). Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
* | | Merge tag 'u-boot-rockchip-20190729' of ↵Tom Rini2019-07-2916-171/+195
|\ \ \ | |/ / |/| | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Clean up and migrate to use common rockchip spl board file - Clean up and migrate to use common rockchip board file - Increase rk3288 CONFIG_SYS_BOOTM_LEN to 16MB
| * | rockchip: rv1108: Migrate to use common board fileKever Yang2019-07-292-11/+0
| | | | | | | | | | | | | | | | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: elgin-rv1108: use board_early_init_f for per-boar initKever Yang2019-07-291-1/+6
| | | | | | | | | | | | | | | | | | | | | Use board_early_init_f() for per-board init operation and use board_init() from common board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3399: Migrate to use common board fileKever Yang2019-07-294-48/+0
| | | | | | | | | | | | | | | | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3399: init vbus regulator in board_early_init_f()Kever Yang2019-07-291-9/+17
| | | | | | | | | | | | | | | | | | | | | Handle per-board init in board_early_init_f() and use the common board_init() for per-platform board init later. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3368: Migrate to use common board fileKever Yang2019-07-294-44/+0
| | | | | | | | | | | | | | | | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3328: Migrate to use common board fileKever Yang2019-07-291-64/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use common board file for board_init() and board_late_init(), for Rockchip SoCs have very similar process. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
| * | rockchip: rk3288: Move rk3288_detect_reset_reason to soc fileKever Yang2019-07-293-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The rk3288_detect_reset_reason() is per-SoC operation, move it to rk3288.c, and extend the rk_board_late_init() with rk3288_board_late_init() to make all the board works fine as before. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3288: Move veyron_init() back to veyron.cKever Yang2019-07-291-0/+63
| | | | | | | | | | | | | | | | | | | | | The veyron_init() should go to its board file veyron.c, and the board_early_init_f() could be the right place. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3288: move board_early_init_f() back to veyronKever Yang2019-07-291-0/+20
| | | | | | | | | | | | | | | | | | | | | The board_early_init_f() is only used by veyron board now, move it into the board file veyron.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: sdram_common: add common dram_init_banksizeKever Yang2019-07-291-8/+0
| | | | | | | | | | | | | | | | | | | | | dram_init_banksize() can be common used by all SoCs, move it into sdram_common.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: clean up board_usb_init() for all SoCsKever Yang2019-07-291-6/+5
| | | | | | | | | | | | | | | | | | | | | Use "snps,dwc2" for compatible name and and common variable names so that we can share the common code for all SoCs. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3399: move chromebook bob specific flow to its board fileKever Yang2019-07-291-0/+21
| | | | | | | | | | | | | | | | | | | | | Add a board_early_init_f() in board_init_f() and move the board specific init code into its own board file. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3288-phycore: move phycore_init() to its own board fileKever Yang2019-07-291-0/+47
| | | | | | | | | | | | | | | | | | | | | phycore_init() is use for phycore board only, it should be move back to phycore-rk3288.c Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
| * | rockchip: rk3288: move setup_led() to firefly-rk3288Kever Yang2019-07-291-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | Only firefly-rk3288 has the dts node "u-boot,boot-led", while CONFIG_SPL_LED is not enable, move code to firefly-rk3288 now in case someone need this code. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | | Merge branch '2019-07-26-ti-imports'WIP/27Jul2019Tom Rini2019-07-278-63/+188
|\ \ \ | | | | | | | | | | | | | | | | - Bring in the rest of the J271E platform - Various OMAP3/AM3517, DA850 fixes
| * | | ARM: am3517_evm: Fix pin muxing to enable EHCI Host in the futureAdam Ford2019-07-271-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables the pinmuxing to support gpio_57 for phy reset and fixes the pinmuxing for the ECHI tranceiver. The clocks don't appear to by fully enabled yet, so OMAP-EHCI on am3517 is still not yet working, but we're one step closer. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | | ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV BoardsAdam Ford2019-07-271-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SOM-LV boards support the OMAP EHCI driver using port 2. With the driver updated to support device tree, this patch sets the corresponding pin muxing for the tranceiver as well as the reset pin. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | | ARM: am3517-evm: Remove non-DM legacy codeAdam Ford2019-07-261-11/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With both SPL and U-Boot now supporting DM, we can start removing legacy code. This patch removes the legacy MMC initalization and legacy I2C initialization since both are now available via DM and device tree. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | | ARM: da850-evm: Remove repeated pinmuxing callsAdam Ford2019-07-261-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arch_cpu_init() initializes the pinmuxing which is called fairly early in the start sequences, so the board_init function doesn't need to do it again. This patch removes the call from board_init. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | | ARM: da850-evm: Remove duplicate UART initializationAdam Ford2019-07-261-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Low Level init functions start the UART, so it doesn't need to happen during board_init. This patch removes it from board_init. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | | ARM: am3517-evm: Remove manual ethernet reset codeAdam Ford2019-07-261-30/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The reset line going to the ethernet controller is controlled by a global reset controlling multiple peripherals. There is no need to manually invoke the reset. Signed-off-by: Adam Ford <aford173@gmail.com>
| * | | configs: j721e_evm_a72: Add initial supportLokesh Vutla2019-07-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial defconfig support for J721e that runs on A72. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | configs: j721e_evm_r5: Add initial supportLokesh Vutla2019-07-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial defconfig support for J721e that runs on R5. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> [trini: Add MAINTAINERS file] Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | board: ti: j721e: Enable fixing up msmc sram nodeSuman Anna2019-07-261-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a ft_board_setup() api that gets called as part of DT fixup before jumping to kernel. In this ft_board_setup() call fdt_fixup_msmc_ram that update msmc sram node. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | | board: ti: j721e: Add board support for j721e evmLokesh Vutla2019-07-263-0/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board specific initialization for j721e evm Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
* | | | Merge tag 'u-boot-imx-20190719' of ↵Tom Rini2019-07-2716-330/+115
|\ \ \ \ | |/ / / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20190719 - CCF for i.MX6 - nandbcb command to write SPL into NAND - Switch to DM (i.MX28) - Boards: Toradex, engicam, DH - Fixes for i.MX8 - Fixes for i.MX7ULP Travis: https://travis-ci.org/sbabic/u-boot-imx/builds/561147504
| * | | ARM: imx6: DHCOM i.MX6 PDK: Switch to DM for I2CLudwig Zenz2019-07-191-103/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables DM I2C for DHCOM i.MX6 PDK2 boards and removes non DM I2C code. The I2C EEPROM with ethaddr (MAC) is defined in the device tree. Use UCLASS_I2C_EEPROM to find the device by fixed hardware path and read the ethaddr. Tested with DHCOM i.MX6dl and DHCOM i.MX6q. Signed-off-by: Ludwig Zenz <lzenz@dh-electronics.com> Reviewed-by: Marek Vasut <marex@denx.de>
View Lorry Controller Status