summaryrefslogtreecommitdiff
path: root/board
Commit message (Collapse)AuthorAgeFilesLines
* mx6sabresd: Update the config fileFabio Estevam2017-05-311-3/+1
| | | | | | | Only configs/mx6sabresd_defconfig is supported now, so update the MAINTAINERS file accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* engicam: Generate single config fileJagan Teki2017-05-314-4/+4
| | | | | | | | Engicam has several SOM's on i.MX6 stream, where each SOM has one include/configs/*.h file, this patch generate single config file for all SOM's include/configs/imx6-engicam.h Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* engicam: Set console env on board_late_initJagan Teki2017-05-311-0/+5
| | | | | | Set console env on board_late_init instead of configs. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* mx25pdk: Set the eSDHC PER clock to 48 MHzBenoît Thébaudeau2017-05-311-0/+6
| | | | | | | | | The maximum SD clock frequency in High Speed mode is 50 MHz. This change makes it possible to get 48 MHz from the USB PLL (240 MHz / 5 / 1) instead of the previous 33.25 MHz from the AHB clock (133 MHz / 2 / 2). Signed-off-by: Benoît Thébaudeau <benoit@wsystem.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* pico-imx7d: Add initial supportVanessa Maegima2017-05-316-0/+464
| | | | | | | | | | | | | Add the initial support for pico-imx7d board based on Wig Cheng's source code. Add support for eMMC, USB gadget, I2C, PMIC and Ethernet. For more information about this board, please visit: http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-05-268-17/+195
|\
| * armv8: LS2080A: Adjust memory map for secure boot headers for NOR-bootUdit Agarwal2017-05-232-0/+2
| | | | | | | | | | | | | | | | | | This patch adjusts memory map for secure boot headers on LS2080AQDS and LS2080ARDB platforms. Secure boot headers are placed on NOR flash at offset 0x00600000. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-bootSantan Kumar2017-05-232-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adjusts memory map for images on LS2080ARDB and LS2080AQDS NOR flash as below Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 PPA firmware 0x00400000 PHY firmware 0x00980000 DPAA2 MC 0x00A00000 DPAA2 DPL 0x00D00000 DPAA2 DPC 0x00E00000 Kernel.itb 0x01000000 Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046AAlison Wang2017-05-231-8/+8
| | | | | | | | | | | | | | | | | | This patch is to adjust the memory mapping for FLash/SD card on LS1046AQDS and LS1046ARDB, such as FMAN firmware load address, U-Boot start address on serial flash and environment address. Signed-off-by: Alison Wang <alison.wang@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080ardb: Add LS2081ARDB board supportPriyanka Jain2017-05-234-3/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | LS2081ARDB board is similar to LS2080ARDB board with few differences It hosts LS2081A SoC Default boot source is QSPI-boot It does not have IFC interface RTC and QSPI flash device are different It provides QIXIS access via I2C Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls2080ardb: Add QSPI-boot supportPriyanka Jain2017-05-232-0/+31
| | | | | | | | | | | | | | | | | | | | QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC. LS2088ARDB RevF Board has limitation that QIXIS can not be accessed. CONFIG_FSL_QIXIS is not enabled. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * board: freescale: ls2080ardb: Update QIXIS codePriyanka Jain2017-05-231-4/+17
| | | | | | | | | | | | | | | | | | Update QIXIS related code to be executed only if CONFIG_FSL_QIXIS flag is enabled. In case QIXIS code is not enabled, use default sysclk value as 100MHz per board documentation. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1043ardb: Make NET independent of FManYork Sun2017-05-231-1/+1
| | | | | | | | | | | | | | | | This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> Acked-by: Mingkai Hu <mingkai.hu@nxp.com>
| * armv8: ls1046ardb: Make NET independent of FManYork Sun2017-05-231-1/+1
| | | | | | | | | | | | | | | | This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun <york.sun@nxp.com> CC: Mingkai Hu <mingkai.hu@nxp.com> Acked-by: Mingkai Hu <mingkai.hu@nxp.com>
| * board: freescale: ls2080ardb: Enable SD interface for RevF boardPriyanka Jain2017-05-231-0/+18
| | | | | | | | | | | | | | | | | | | | LS2080ARDB/LS2088ARDB RevF board has smart voltage translator which needs to be programmed to enable high speed SD interface by setting GPIO4_10 output to zero. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini2017-05-262-4/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Move FTMAC100 to where it should be, alphabetically in drivers/net/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/Kconfig
| * | nds32: eth: Support ftmac100 DM.rick2017-05-232-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support Andestech eth ftmac100 device tree flow on AG101P/AE3XX platform. Verification: Boot linux kernel via dhcp and bootm ok. NDS32 # setenv bootm_size 0x2000000;setenv fdt_high 0x1f00000; NDS32 # dhcp 0x600000 10.0.4.97:boomimage-310y-ae300-spi.bin BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4899 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'boomimage-310y-ae300-spi.bin'. Load address: 0x600000 Loading: ################################################################# ################################################################# ################################################################# ... ... ################################### 233.4 KiB/s done Bytes transferred = 13872076 (d3abcc hex) NDS32 # dhcp 0x2000000 10.0.4.97:ae300.dtb BOOTP broadcast 1 BOOTP broadcast 2 BOOTP broadcast 3 BOOTP broadcast 4 DHCP client bound to address 10.0.4.178 (4592 ms) Using mac@e0100000 device TFTP from server 10.0.4.97; our IP address is 10.0.4.178 Filename 'ae300.dtb'. Load address: 0x2000000 Loading: # 82 KiB/s done Bytes transferred = 2378 (94a hex) NDS32 # bootm 0x600000 - 0x2000000 Image Name: Created: 2017-03-22 6:52:03 UTC Image Type: NDS32 Linux Kernel Image (uncompressed) Data Size: 13872012 Bytes = 13.2 MiB Load Address: 0000c000 Entry Point: 0000c000 Verifying Checksum ... OK Booting using the fdt blob at 0x2000000 Loading Kernel Image ... OK Loading Device Tree to 01efc000, end 01eff949 ... OK Linux version 3.10.102-20375-gb0034c1-dirty (rick@app09) (gcc version 4.9.3 (2016-07-06_nds32le-linux-glibc-v3_experimental) ) #293 PREEMPT Wed Mar 22 14:49:28 CST 2017 CPU: NDS32 N13, AndesCore ID(wb), CPU_VER 0x0d11103f(id 13, rev 17, cfg 4159) ... ... Signed-off-by: rick <rick@andestech.com>
* | | Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2017-05-232-11/+217
|\ \ \ | |/ / |/| |
| * | ARM: rmobile: salvator-x: Add R8A7796 supportMarek Vasut2017-05-222-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add minor ifdeffery and default board config for the Salvator-XS board with R8A7796 M3 SoC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Rename the defconfig to match the SoCMarek Vasut2017-05-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the salvator-x_defconfig to r8a7795_salvator-x_defconfig in preparation for the r8a7796 support on salvator-x board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Count all DRAM in all slotsMarek Vasut2017-05-221-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of counting only the DRAM in the first slot, count all the DRAM in all slots and report it accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add USB supportMarek Vasut2017-05-221-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the EHCI USB. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add DVFS and PMIC supportMarek Vasut2017-05-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for rebooting the board using the ROHM BD9571MWV I2C PMIC, but keep the CPU reboot option as a fallback. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add RAVB ethernet supportMarek Vasut2017-05-221-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the AVB ethernet on the Salvator-X board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Add SD supportMarek Vasut2017-05-221-1/+88
| | | | | | | | | | | | | | | | | | | | | | | | Add support for the SD card slots on the Salvator-X board. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Adjust UART clockMarek Vasut2017-05-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | The UART uses internal SCIF clock except on R8A7795 H3 WS1.0 . Use the internal clock and ignore the early version of the chip. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Zap redefined DECLARE_GLOBAL_DATA_PTRMarek Vasut2017-05-221-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | The macro is used twice in the salvator-x board file, drop one. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: salvator-x: Use BIT() macro in board fileMarek Vasut2017-05-221-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | Cosmetic change, replace (1 << (n)) with BIT(n) . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | mksunxi_fit_atf.sh: Allow for this to complete when bl31.bin is missingTom Rini2017-05-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In situations like an autobuilder we are likely to not have bl31.bin present and thus would fail to build and propagate the error upwards. Instead, print a big warning to stderr so that human will see that something is wrong but complete the build. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Merge git://git.denx.de/u-boot-sunxiTom Rini2017-05-225-103/+277
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't get Kconfig errors on platforms without SPL, ie sandbox (without SPL). Signed-off-by: Tom Rini <trini@konsulko.com>
| * | | sunxi: Move maintainership for Pine64Andre Przywara2017-05-171-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After speaking to Hans at FOSDEM, he is fine with transferring the maintainership of the Pine64 boards over to me. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | | sunxi: update Pine64 READMEAndre Przywara2017-05-172-98/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the DRAM init code and the SPL's ability to load the ATF binary as well, we can now officially get rid of the boot0 boot method, which involed a closed-source proprietary blob to be used. Rework the Pine64 README file to document how to build the firmware. Also since these instructions now cover more boards, rename the file to README.sunxi64 to reflect this. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | | sunxi: use SPL header DT name for FIT board matchingAndre Przywara2017-05-171-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we can store a DT name in the SPL header, use this string (if available) when finding the right DT blob to load for U-Boot proper. This allows a generic U-Boot (proper) image to be combined with a bunch of supported DTs, with just the SPL (possibly only that string) to be different. Eventually this string can be written after the build process by some firmware update tool. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * | | sunxi: 64-bit SoCs: introduce FIT generator scriptAndre Przywara2017-05-171-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that the Makefile can call a generator script to build a more advanced FIT image, let's use this feature to address the needs of Allwinner boards with 64-bit SoCs (A64 and H5). The (DTB stripped) U-Boot binary and the ATF are static, but we allow an arbitrary number of supported device trees to be passed. The script enters both a DT entry in the /images node and the respective subnode in /configurations to support all listed DTBs. The location of the bl31.bin image from the ARM Trusted Firmware build can either by specified via the BL31 environment variable. If this is not set, the script looks for bl31.bin in U-Boot's build directory (which could be a symlink as well). Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * | | sunxi: SPL: add FIT config selector for Pine64 boardsAndre Przywara2017-05-171-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a board or platform to support FIT loading in the SPL, it has to provide a board_fit_config_name_match() routine, which helps to select one of possibly multiple DTBs contained in a FIT image. Provide a simple function which chooses the DT name U-Boot was configured with. If the DT name is one of the two Pine64 versions, determine the exact model by checking the DRAM size. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@openedev.com>
| * | | sunxi: SPL: store RAM size in gdAndre Przywara2017-05-171-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunxi SPL was holding the detected RAM size in some local variable only, so it wasn't accessible for other functions. Store the value in gd->ram_size instead, so it can be used later on. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini2017-05-225-1/+126
|\ \ \ \
| * | | | nds32: Support AE3XX platform.rick2017-05-225-1/+126
| | |/ / | |/| | | | | | | | | | | | | | | | | | Support Andestech AE3xx platform: serial, timer device tree flow. Signed-off-by: rick <rick@andestech.com>
* | | | Convert CONFIG_CMD_IOLOOP to KconfigSimon Glass2017-05-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IOLOOP Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Kconfig: Add a CONFIG_IDE optionSimon Glass2017-05-228-12/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present IDE support is controlled by CONFIG_CMD_IDE. Add a separate CONFIG_IDE option so that IDE support can be enabled without requiring the 'ide' command. Update existing users and move the ide driver into drivers/block since it should not be in common/. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_HD44760 to KconfigSimon Glass2017-05-222-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HD44760 Also drop CONFIG_CMD_HD44780 which appears to be a typo. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_HASH to KconfigSimon Glass2017-05-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_HASH Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework slightly, enable on some boards again] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | Convert CONFIG_CMD_GSC to KconfigSimon Glass2017-05-221-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_GSC Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Convert CONFIG_CMD_ESBC_VALIDATE to KconfigSimon Glass2017-05-221-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_ESBC_VALIDATE Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Convert CONFIG_CMD_EEPROM et al to KconfigSimon Glass2017-05-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_EEPROM CONFIG_CMD_EEPROM_LAYOUT CONFIG_EEPROM_LAYOUT_HELP_STRING Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Rework Kconfig logic slightly, define EEPROM location on TI eval platforms] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | Convert CONFIG_CMD_EECONFIG to KconfigSimon Glass2017-05-221-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_EECONFIG Signed-off-by: Simon Glass <sjg@chromium.org>
* | | | Drop digital thermometer and thermostat (DTT) driversSimon Glass2017-05-224-12/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This subsystem is quite old. It has been replaced with a driver-model version (UCLASS_THERMAL). Boards are free to convert to that if required, but here is a removal patch that could be applied in the meantime. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | lib: move hash CONFIG options to KconfigTom Rini2017-05-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 94e3c8c4fd7b ("crypto/fsl - Add progressive hashing support using hardware acceleration.") created entries for CONFIG_SHA1, CONFIG_SHA256, CONFIG_SHA_HW_ACCEL, and CONFIG_SHA_PROG_HW_ACCEL. However, no defconfig has migrated to it. Complete the move by first adding additional logic to various Kconfig files to select this when required and then use the moveconfig tool. In many cases we can select these because they are required to implement other drivers. We also correct how we include the various hashing algorithms in SPL. This commit was generated as follows (after Kconfig additions): [1] tools/moveconfig.py -y SHA1 SHA256 SHA_HW_ACCEL [2] tools/moveconfig.py -y SHA_PROG_HW_ACCEL Note: We cannot move SHA_HW_ACCEL and SHA_PROG_HW_ACCEL simultaneously because there is dependency between them. Cc: Poonam Aggrwal <poonam.aggrwal@freescale.com> Cc: Naveen Burmi <NaveenBurmi@freescale.com> Cc: Po Liu <po.liu@freescale.com> Cc: Shengzhou Liu <Shengzhou.Liu@freescale.com> Cc: Priyanka Jain <Priyanka.Jain@freescale.com> Cc: Shaohui Xie <Shaohui.Xie@freescale.com> Cc: Chunhe Lan <Chunhe.Lan@freescale.com> Cc: Chander Kashyap <k.chander@samsung.com> Cc: Steve Rae <steve.rae@raedomain.com> Cc: Dirk Eibach <eibach@gdsys.de> Cc: Feng Li <feng.li_2@nxp.com> Cc: Alison Wang <alison.wang@freescale.com> Cc: Sumit Garg <sumit.garg@nxp.com> Cc: Mingkai Hu <Mingkai.Hu@freescale.com> Cc: York Sun <york.sun@nxp.com> Cc: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Akshay Saraswat <akshay.s@samsung.com> Cc: Heiko Schocher <hs@denx.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | Convert CONFIG_SPL_BOARD_INIT to KconfigLey Foon Tan2017-05-221-0/+1
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2017-05-1815-1777/+873
|\ \ \
View Lorry Controller Status