summaryrefslogtreecommitdiff
path: root/configs/omap35_logic_defconfig
Commit message (Collapse)AuthorAgeFilesLines
* spl: Convert SYS_MMCSD_RAW_MODE_KERNEL_SECTOR to KconfigAlexandru Gagniuc2022-01-211-0/+2
| | | | | | | | | | | | | | | | | Falcon mode is very useful in improving boot speed. A question that Falcon mode asks is "Where do I look for the kernel". With MMC boot media, the correct answer is CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR. The scope of this patch is to move this to Kconfig. It is possible for a system to support Falcon mode from NOR but not MMC. In that case, mmc_load_image_raw_os() would not be used. To address this, conditionally compile mmc_load_image_raw_os() when SPL_FALCON_BOOT_MMCSD, instead of SPL_OS_BOOT. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Move spl_start_uboot to its own guard in spl_mmc.c, rerun migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_USE_BOOTCOMMAND et al to KconfigTom Rini2021-12-011-1/+1
| | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_BOOTCOMMAND CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND CONFIG_NFSBOOTCOMMAND Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigTom Rini2021-11-011-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: omap3x_logic: Enable LTO on more LogicPD OMAP3 boardsAdam Ford2021-10-111-0/+1
| | | | | | | There are five omap3 based boards from LogicPD. Two of them have added LTO support. Add the remaining three to use LTO. Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_NAND_OMAP_ECCSCHEME to KconfigTom Rini2021-10-061-0/+1
| | | | | | | | | The values of CONFIG_NAND_OMAP_ECCSCHEME map to the enum in include/linux/mtd/omap_gpmc.h for valid ECC schemes. Make which one we will use be a choice statement, enumerating the ones which we have implemented. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_NAND_PAGE_COUNT to KconfigTom Rini2021-10-061-0/+1
| | | | | | | This converts the following to Kconfig: CONFIG_SYS_NAND_PAGE_COUNT Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_NAND_LOAD et al to KconfigTom Rini2021-10-061-0/+3
| | | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_NAND_LOAD CONFIG_SYS_NAND_BLOCK_SIZE CONFIG_SYS_NAND_PAGE_SIZE CONFIG_SYS_NAND_OOBSIZE Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SYS_I2C_EEPROM_ADDR et al to KconfigTom Rini2021-08-301-0/+1
| | | | | | | | | | | | | - Rename usages of CONFIG_SYS_DEF_EEPROM_ADDR to CONFIG_SYS_I2C_EEPROM_ADDR based on current usage. - Convert CONFIG_SYS_I2C_EEPROM_ADDR, CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SYS_I2C_EEPROM_BUS, CONFIG_CONFIG_SYS_EEPROM_SIZE CONFIG_SYS_EEPROM_PAGE_WRITE_BITS and CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS to Kconfig. We move these symbols around a bit and add appropriate dependencies to them. In some cases, we now add a correct default value as well. Signed-off-by: Tom Rini <trini@konsulko.com>
* i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass2021-07-281-1/+1
| | | | | | | Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* Rename GPIO_SUPPORT to GPIOSimon Glass2021-07-281-1/+1
| | | | | | Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
* configs: Resync with savedefconfigTom Rini2021-07-261-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: omap3x_logic: Fix boot hang by reducing SYS_MALLOC_F_LENAdam Ford2021-07-151-1/+1
| | | | | | | | | | | | The AM3517 uses SYS_MALLOC_F_LEN of size 0x3000, but the rest of the OMAP3 boards from LogicPD / BeaconEmbedded use 0x4000, but they don't boot SPL. Reduce the malloc size to restore booting. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210625185717.243211-1-aford173@gmail.com
* configs: Resync with savedefconfigTom Rini2021-06-281-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigTom Rini2021-05-111-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigWIP/27Apr2021Tom Rini2021-04-271-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: omap3_logic: Enable CONFIG_SPL_ALLOC_BDAdam Ford2021-03-151-0/+1
| | | | | | | | | With bd_info dropped from the data section, the Logic PD OMAP3 boards and AM3517 fail to boot. Enabling CONFIG_SPL_ALLOC_BD restores them. Fixes: 38d6b7ebdaee ("spl: Drop bd_info in the data section") Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: Resync with savedefconfigWIP/2020-10-09-kconfig-reorgTom Rini2020-10-091-2/+2
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigv2020.10-rc2Tom Rini2020-08-101-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPL_NAND_BASE et al to KconfigAdam Ford2020-07-281-0/+1
| | | | | | | | This converts the following to Kconfig: CONFIG_SPL_NAND_BASE CONFIG_SPL_NAND_IDENT Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_SPL_NAND_DRIVERS et al to KconfigAdam Ford2020-07-281-1/+3
| | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_NAND_DRIVERS CONFIG_SPL_NAND_ECC CONFIG_SPL_NAND_SIMPLE Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_ENV_OVERWRITE to KconfigAdam Ford2020-07-281-0/+1
| | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_OVERWRITE Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rerun migration, remove some comments] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigTom Rini2020-07-281-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Resync with savedefconfigTom Rini2020-07-061-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: omap3_logic boards: Convert to DM_ETHAdam Ford2020-05-191-1/+1
| | | | | | | | | | | | | | | | | | | | | With the converstion of SMC911x to DM, this can facilitate the omap3 boards from LogicPD (now called Beacon EmbeddedWorks) to be converted. There isn't a clean solution to doing this in phases, so the boards are all being done together to avoid breaking functionality. Because the GPMC bus hasn't been converted, the -u-boot.dtsi node needs to show the address of the ethernet controller for each board. The board file, which is common betwen the OMAP35 and DM37 SOM LV and Torpedo boards, can remove the manual ethernet initialization, but it still needs to register the address and GPMC configuration for the Ethernet controller which is now being moved around to board_late_init(). Lastly, this patch updates the various config files to add the reference for DM_ETH and remove the SMC address, which is now fetched from the newly created device tree nodes. Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: Resync with savedefconfigTom Rini2020-01-221-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: omap3/35_logic and omap3/35_logic_somlv: Reduce SPL sizeAdam Ford2020-01-201-0/+2
| | | | | | | | | | | | | | Currently the DM37 and OMAP35 boards do not boot due to SPL bring too large. SPL doesn't need GPIO, I2C nor MMC sector access since it uses a FAT file system. This patch unifies all these boards to remove these unused features from their defconfigs Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* dm: gpio: Allow control of GPIO uclass in SPLSimon Glass2019-12-151-0/+1
| | | | | | | | | | | | | | | | | | | | At present if CONFIG_SPL_GPIO_SUPPORT is enabled then the GPIO uclass is included in SPL/TPL without any control for boards. Some boards may want to disable this to reduce code size where GPIOs are not needed in SPL or TPL. Add a new Kconfig option to permit this. Default it to 'y' so that existing boards work correctly. Change existing uses of CONFIG_DM_GPIO to CONFIG_IS_ENABLED(DM_GPIO) to preserve the current behaviour. Also update the 74x164 GPIO driver since it cannot build with SPL. This allows us to remove the hacks in config_uncmd_spl.h and Makefile.uncmd_spl (eventually those files should be removed). Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* configs: Resync with savedefconfigWIP/04Dec2019Tom Rini2019-12-041-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* mtd: ensure MTD/the raw NAND core are compiled when there is a NAND flashMiquel Raynal2019-12-041-0/+1
| | | | | | | | | | | | Both symbols must be enabled when there is a raw NAND driver selected. Also enable them when CONFIG_CMD_NAND is selected to avoid breaking things when we'll further rework the MTD dependency description. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> [trini: Rebase and migrate a few more boards here] Signed-off-by: Tom Rini <trini@konsulko.com>
* mtd: rename CONFIG_NAND -> CONFIG_MTD_RAW_NANDMiquel Raynal2019-12-031-1/+1
| | | | | | | | | Add more clarity by changing the Kconfig entry name. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> [trini: Re-run migration, update a few more cases] Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
* Revert "ARM: omap3_logic/omap35_logic: Enable GPIO in SPL"Adam Ford2019-11-071-0/+1
| | | | | | | | | | The SPL is too tight, and it cannot start any longer. To help reduce the size of SPL, we need to remove some non-critical features. This reverts commit 66063a7c1388fb724e8671b03c529fb5cda992dd. Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: Resync with savedefconfigTom Rini2019-09-231-1/+1
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass2019-08-021-0/+2
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
* ARM: omap3/omap35_logic: Fix broken Logic PD Torpedo bootingAdam Ford2019-07-271-1/+0
| | | | | | | | | | The SOM-LV and Torpedo boards are very similar, but something happened growing SPL enough to break the Torpedo. The SOM-LV board were not doing alias sequencing during SPL and they continue to work while something broke the Torpedo. This patch disables SPL_DM_SEQ_ALIAS allowing it to boot again. Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omap3_logic & omap35_logic: Disable OMAP EHCI for TorpedoAdam Ford2019-07-271-0/+1
| | | | | | | | The OMAP35 and AM/DM37 Torpedo boards do not have a USB tranceiver connected to the USB host port, so this patch removes it from the defconfig files. Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omap3_logic/omap35_logic: Enable GPIO in SPLAdam Ford2019-05-181-1/+0
| | | | | | | The MMC controller enabled card detect, so this patch enables the GPIO driver in SPL to support it. Signed-off-by: Adam Ford <aford173@gmail.com>
* Merge tag 'u-boot-imx-20190426' of git://git.denx.de/u-boot-imxTom Rini2019-05-011-0/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | Porting to DM and i.MX8 ------------------------ - warp7 to DM - kp_imx53 to DM - Warnings in DT - MX8QM support - colibri-imx6ull to DM - imx7d-pico to DM - ocotp for MX8
| * ARM: omap3_logic: Enable UUIDAdam Ford2019-04-251-0/+1
| | | | | | | | | | | | | | Instead of hardcoding the mmcroot to /dev/mmcblkX, use the UUID method. Signed-off-by: Adam Ford <aford173@gmail.com>
* | configs: move CONFIG_SPL_TEXT_BASE to KconfigSimon Goldschmidt2019-04-291-0/+1
| | | | | | | | | | | | | | | | | | Moved CONFIG_SPL_TEXT_BASE to common/spl/Kconfig and migrate existing values. Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Re-run migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Resync with savedefconfigTom Rini2019-04-291-1/+1
|/ | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: omap3_logic: Enable SPL booting device treeAdam Ford2019-02-191-1/+9
| | | | | | | | | | | | With the generic omap3-u-boot.dtsi file available, this patch increased the memory of the various incarnations of the omap3_logic board, and points their respective u-boot.dtsi files to the newly created generic one, and removes the PLATDATA from the board file. These are all done at once because the're all utilizing the same omap3logic.c board file. Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: Resync with savedefconfigTom Rini2019-01-071-1/+0
| | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: omap3_logic/omap35_logic: Move to DM_USBAdam Ford2018-12-121-9/+4
| | | | | | | | | The existing config is setup as a gadget but it doesn't use DM_USB. This patch converts all boards to DM_USB, but as host. As host, it is able to mount USB drives and browse them. Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omap3_logic: Remove SPL_OF_CONTROL and OF_PLATDATAAdam Ford2018-11-161-2/+0
| | | | | | | After the recomendation, some testing shows like these are unnecessary. Suggested-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: omap3_logic: Make CONFIG_SYS_TEXT_BASE match README.omap3Adam Ford2018-11-161-0/+1
| | | | | | | | | README.omap3 has two options. For option 1, CONFIG_SYS_TEXT_BASE is set to 0x80100000. Option 2 lists 0x80008000. The existing value is neither of these, so this patch makes it equivalent to Option 1. Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: Migrate and re-enabled CONFIG_CMD_MTDPARTSTom Rini2018-11-141-0/+1
| | | | | | | | | Now that CMD_UBI does not select CMD_MTDPARTS we need to make platforms that had been enabling it turn it on by hand. This exposed that we had not yet migrated CMD_MTDPARTS fully, so do so now. Fixes: 86dfa556d927 ("cmd: ubi: Remove useless call to mtdparts_init()") Signed-off-by: Tom Rini <trini@konsulko.com>
* ARM: DTS: Add Logic PD OMAP35/DM37 SOM-LV and OMAP35 TorpedoAdam Ford2018-10-061-0/+72
With the device trees doing most of the work of pin-muxing and DM doing much of the peripheral initialization, this creates new defconfig files for each of the Logic PD variants with proper register settings/pin-muxing. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update MAINTAINERS entry] Signed-off-by: Tom Rini <trini@konsulko.com>
View Lorry Controller Status