summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* ARM: da850evm: Enable SPL_SYS_MALLOC_SIMPLEAdam Ford2018-08-201-0/+1
| | | | | | | | | | | | | | | | | | | | | The SPL space is limited. In order to try to enable DM in SPL, we need more space. When combined wtih TINY_PRINTF, this reduces the size of SPL by 6.5k Original: text data bss dec hex filename 20760 1216 80 22056 5628 spl/u-boot-spl Tiny Printf text data bss dec hex filename 17947 1216 80 19243 4b2b spl/u-boot-spl Malloc Simple + Tiny Printf text data bss dec hex filename 15187 176 28 15391 3c1f spl/u-boot-spl Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: da850evm: Enable USE_TINY_PRINTFAdam Ford2018-08-201-0/+1
| | | | | | | | | | | | | | The SPL space is limited. In order to try to enable DM in SPL, we need more space. This reduces the size of SPL by ~2.7K before: text data bss dec hex filename 20760 1216 80 22056 5628 spl/u-boot-spl after: text data bss dec hex filename 17947 1216 80 19243 4b2b spl/u-boot-spl Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: da850evm: Remove DM_I2C_COMPATAdam Ford2018-08-201-1/+0
| | | | | | | | | | | | | | | | Since using DM_I2C_COMPAT throws a warning during compilation, and it isn't really needed any longer, so this patch removes this feature and shrinks the code a bit. from: text data bss dec hex filename 343326 13388 123448 480162 753a2 u-boot to: text data bss dec hex filename 342924 13380 123440 479744 75200 u-boot Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_SYS_I2C_DAVINCI to KconfigAdam Ford2018-08-1714-0/+14
| | | | | | | This converts the following to Kconfig: CONFIG_SYS_I2C_DAVINCI Signed-off-by: Adam Ford <aford173@gmail.com>
* Removed unused references to CONFIG_SERIALxAdam Ford2018-08-176-6/+6
| | | | | | | | | After creating CONS_INDEX and migrating a bunch of boards to it, there are a bunch of defined references to CONFIG_SERIALx which are not referenced in any C code or #ifdef, so they can now be removed Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_TWL4030_LED et al to KconfigAdam Ford2018-08-1713-0/+13
| | | | | | | | | | | This converts the following to Kconfig: CONFIG_TWL4030_LED CONFIG_TWL4030_INPUT This also removes dead references to: CONFIG_TWL4030_KEYPAD Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_VIDEO_OMAP3 to KconfigAdam Ford2018-08-175-0/+5
| | | | | | | This converts the following to Kconfig: CONFIG_VIDEO_OMAP3 Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG_MISC_INIT_R to KconfigAdam Ford2018-08-17321-38/+319
| | | | | | | | | This converts the following to Kconfig: CONFIG_MISC_INIT_R Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Update the defaults logic slightly] Signed-off-by: Tom Rini <trini@konsulko.com>
* Migrate bootlimit to KconfigAlex Kiernan2018-08-1731-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Migrate boards which set bootlimit in the environment to Kconfig. We exclude gurnard_defconfig which includes a bootlimit=, but doesn't set CONFIG_BOOTCOUNT_LIMIT, so we'd fail to include a bootlimit setting if we migrated it. display5_defconfig and display5_factory_defconfig share a SYS_CONFIG_NAME, but only display5_defconfig enables CONFIG_BOOTCOUNT_LIMIT, so we fail to set bootlimit= in display5_factory_defconfig. This is okay because the display5_factory_defconfig doesn't need to have it set, as it is only meant to prepare the board in the factory. Environment changes for all modified configs as seen from buildman: boards.cfg is up to date. Nothing to do. Summary of 3 commits for 32 boards (8 threads, 1 job per thread) 01: Merge git://git.denx.de/u-boot-x86 arm: + draco etamin rastaban pxm2 display5 thuban rut 02: Add BOOTCOUNT_BOOTLIMIT to set reboot limit 03: Migrate bootlimit to Kconfig - display5_factory: bootlimit=3 Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Convert CONFIG_MII et al to KconfigAdam Ford2018-08-17690-407/+703
| | | | | | | | | | This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'master' of git://git.denx.de/u-boot-socfpgaTom Rini2018-08-171-0/+2
|\
| * ARM: socfpga: Enable DM ethernet on A10Marek Vasut2018-08-131-0/+2
| | | | | | | | | | | | | | | | | | | | Enable DM ethernet framework on Arria10, so that the designware GMAC can be probed from DT as it should be. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Ley Foon Tan <ley.foon.tan@intel.com>
* | configs: Migrate CONFIG_NR_DRAM_BANKSTom Rini2018-08-16746-0/+746
| | | | | | | | | | | | | | | | | | | | | | We have the following cases: - CONFIG_NR_DRAM_BANKS was defined, migrate normally - CONFIG_NR_DRAM_BANKS_MAX was defined and then used for CONFIG_NR_DRAM_BANKS after a check, just migrate it over now. - CONFIG_NR_DRAM_BANKS was very oddly defined on p2771-0000-* (to 1024 + 2), set this to 8. Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: Resync with savedefconfigTom Rini2018-08-132-4/+1
| | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: omap3: evm: Enable CONFIG_BLK and misc. cleanupDerald D. Woods2018-08-131-2/+7
| | | | | | | | | | | | | | | | | | | | | | This commit enables CONFIG_BLK and removes USB_STORAGE which is awaiting proper implementation for current U-Boot interfaces. Additionally the console selection is now handled by Kconfig and no longer needs to be in the config header. CONFIG_SYS_MALLOC_F_LEN=0x2000 was added to sync with other boards. CONFIG_SPL_BLK and CONFIG_SPL_DM_MMC are disabled because they currently do not allow the OMAP3-EVM (OMAP34XX) to actually boot. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
* | db410c: add FIT supportRamon Fried2018-08-131-2/+1
| | | | | | | | | | | | | | | | 1. Add FIT support for DB410c defconfig. 2. Don't overwrite bootargs (they're already defined in Linux device tree for DB410c. Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
* | configs: stm32f429-evaluation: Add DISTRO_DEFAULT supportPatrice Chotard2018-08-131-7/+4
| | | | | | | | | | | | | | Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | configs: stm32f469-discovery: Add DISTRO_DEFAULT supportPatrice Chotard2018-08-131-7/+4
| | | | | | | | | | | | | | Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | configs: stm32h743-discovery: Add DISTRO_DEFAULT supportPatrice Chotard2018-08-131-9/+3
| | | | | | | | | | | | | | Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | configs: stm32h743-evaluation: Add DISTRO_DEFAULT supportPatrice Chotard2018-08-131-9/+3
| | | | | | | | | | | | | | Add DISTRO_DEFAULT support to be able to boot on mmc by default on boot. Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | configs: stm32h7xx: Migrate CONFIG_CMD_CACHE to defconfigPatrice Chotard2018-08-132-0/+2
| | | | | | | | | | | | | | Remove CONFIG_CMD_CACHE from include/configs/stm32h7xx.h and enable it in stm32h7xx_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | configs: stm32f746-disco: Migrate CONFIG_CMD_CACHE to defconfigPatrice Chotard2018-08-131-0/+1
| | | | | | | | | | | | | | Remove CONFIG_CMD_CACHE from include/configs/stm32f746-disco.h and enable it in stm32f746-disco_defconfig Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2018-08-131-0/+4
|\ \
| * | Board: ls1088ardb: Enable PCIe config for Secure boot defconfigsVinitha V Pillai2018-08-071-0/+4
| | | | | | | | | | | | | | | Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2018-08-111-0/+3
|\ \ \ | |_|/ |/| |
| * | sandbox: Add and build AXI bus and deviceMario Six2018-08-111-0/+3
| | | | | | | | | | | | | | | | | | | | | Add test AXI drivers to the sandbox. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Mario Six <mario.six@gdsys.cc>
* | | configs: omap3_logic: Disable NAND ID during SPLAdam Ford2018-08-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | For these boards, the GPMC timings are more determined by processor speed/type than the NAND/PoP memory. This code is never invoked, so disable the config option, so it doesn't take the time to compile it in. Signed-off-by: Adam Ford <aford173@gmail.com>
* | | omap3_logic: Fix CONS_INDEXAdam Ford2018-08-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The console index for SPL should be 1 not 3 in order to see text during SPL. Fixes: 6f6b7cfa89e5 ("Convert all of CONFIG_CONS_INDEX to Kconfig") Signed-off-by: Adam Ford <aford173@gmail.com>
* | | stm32mp1: add gpio led supportPatrick Delaunay2018-08-101-0/+2
|/ / | | | | | | | | | | | | | | This patch add the 4 LED available on the ED1 board and activated gpio led driver. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2018-08-087-116/+48
|\ \
| * | bcm968380gerg: add initial supportPhilippe Reynes2018-08-081-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add the initial support of the broadcom reference board bcm968380gerg with a bcm68380 SoC. This board has 512 MB of RAM, 128 MB of flash (nand), 2 USB port, 1 UART, 4 ethernet ports and BCM43217 (wifi). Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | mips: au1x00: Remove support for these SoCsTom Rini2018-08-081-20/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The only platform left for the AU1x00 SoCs was the pb1x00 platform, an apparent clone of the dbau1x00 platform. As pb1x00 had no listed maintainer I am assuming that it is also orphaned. Remove this platform and then remove the unused SoC support. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | mips: dbau1x00: Remove this boardTom Rini2018-08-085-96/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This platform has been marked as orphan since June of 2016 and should have been removed some time ago. Do so now. Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* | | configs: Resync with savedefconfigTom Rini2018-08-0740-119/+55
| | | | | | | | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-samsungTom Rini2018-08-071-2/+1
|\ \ \ | |/ / |/| |
| * | ARM: Odroid XU3: Enable driver model support for MMC (DM_MMC)Lukasz Majewski2018-08-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | This commit enables support for DW_MMC running with driver model. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | ARM: Odroid XU3: config: Disable SDHCI support in the Odroid XU3Lukasz Majewski2018-08-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Exynos5422 is solely using DW MMC IP block to support eMMC/SD devices, hence the SDHCI code doesn't need to be compiled it. Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | Merge tag 'xilinx-for-v2018.09-rc2' of git://git.denx.de/u-boot-microblazeTom Rini2018-08-0715-0/+174
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xilinx fixes for v2018.09-rc2 xilinx: - Add support for zybo z7 and ultra96 - Tune zynq and zynqmp mini configurations - Move SYS_MALLOC_LEN to Kconfig fdt - make static funcs gpio: - Fix soft gpio driver - Fix Zynq gpio driver by using platdata microblaze: - Fix Kconfig entry spi - Move ISSI to Kconfig
| * | | arm64: zynqmp: Add support for Avnet Ultra96Michal Simek2018-08-061-0/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Avnet Ultra96 is rebranded Xilinx zcu100 revC/D. Add new defconfig files and point to origin internal board name. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm: zynq: add support for the zybo z7 boardLuis Araneda2018-08-061-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board is manufactured by Digilent Main features: - Soc: XC7Z010 (Z7-10) or XC7Z020 (Z7-20) - RAM: 1 GB DDR3L - FLASH: 16 MB QSPI - 1 Gbps Ethernet - USB 2.0 - microSD slot - Pcam camera connector - HDMI Tx and Rx - Audio codec: stereo out, stereo in, mic - 5 (Z7-10) or 6 (Z7-20) Pmod ports - 6 push-buttons, 4 switches, 5 LEDs - 1 (Z7-10) or 2 (Z7-20) RGB LEDs Signed-off-by: Luis Araneda <luaraneda@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | Kconfig: Move config SYS_MALLOC_LEN to Kconfig for zynqSiva Durga Prasad Paladugu2018-08-063-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves the the config SYS_MALLOC_LEN to Kconfig. It will be just for Zynq arch and to do will be for all other archs. Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Vipul Kumar <vipul.kumar@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Enable soft gpio driver for zcu102 and zcu100Michal Simek2018-08-064-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Enable soft gpio driver for zcu102 and zcu100. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | spi: Kconfig: Create ISSI Kconfig entryMichal Simek2018-08-067-0/+7
| | |/ | |/| | | | | | | | | | | | | | | | Add ISSI to Kconfig to make it selectable via menuconfig. Also convert all current platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | ARM: kirkwood: add SBx81LIFXCAT boardChris Packham2018-08-071-0/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | This is a series of line cards for Allied Telesis's SBx8100 chassis switch. The CPU block is common to the SBx81GP24 and SBx81GT24 cards cards collectively referred to as SBx81LIFXCAT in u-boot. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | configs: kirkwood: Move RTC_MV to DM and KconfigChris Packham2018-08-078-7/+30
| | | | | | | | | | | | | | | | | | | | | | | | Now that there is DM support in the RTC_MV driver update board configs to use it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | configs: kirkwood: ds109: switch to DM_I2CChris Packham2018-08-071-0/+2
| | | | | | | | | | | | | | | | | | | | | Enable DM_I2C and I2C_MVTSWI for the ds109 board. Signed-off-by: Chris Packham <judge.packham@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | mvebu: select boot device at SoC levelBaruch Siach2018-08-062-1/+2
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the gdsys Controlcenter DC specific build time kwbimage.cfg generation code into the mach-mvebu/ directory to be shared by all 32bit mvebu platforms. Remove board specific kwbimage.cfg files, and use the generated one instead. These files are all identical, with two exceptions. Clearfog and Helios4 use the sdio boot device, whereas all others use spi. Update the defconfigs for the exceptional boards to generate the same kwbimage.cfg as before. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2018-08-043-0/+32
|\ \
| * | board: sun50i: h6: Add OrangePi One Plus initial supportJagan Teki2018-07-311-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | OrangePi One Plus is Allwinner H6 based open-source SBC, which support: - Allwinner H6 Quad-core 64-bit ARM Cortex-A53 - GPU Mali-T720 - 1GB LPDDR3 RAM - AXP805 PMIC - 1Gbps GMAC via RTL8211 - USB 2.0 Host, OTG - HDMI port - 5V/2A DC power supply Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
| * | sunxi: add support for Pine H64 boardIcenowy Zheng2018-07-311-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pine H64 is a SBC with Allwinner H6 SoC produced by Pine64. It features 1GiB/2GiB/4GiB(3GiB usable) DRAM, two USB 2.0 ports, one USB 3.0 port and a mPCIE slot. Add support for it. The device tree is from Linux next-20180720. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Jagan Teki <jagan@openedev.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
View Lorry Controller Status