summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* Merge git://git.denx.de/u-boot-sunxiTom Rini2017-12-1914-9/+44
|\
| * configs: sunxi: Drop FASTBOOT_FLASHJagan Teki2017-12-199-9/+0
| | | | | | | | | | | | | | | | Now FASTBOOT_FLASH is auto select for sunxi platform, so drop explicit addition. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * sunxi: Add the TBS A711 tabletMaxime Ripard2017-12-081-0/+23
| | | | | | | | | | | | | | | | The TBS Tablet sports an LVDS display, an eMMC, an external SD, USB devices and USB OTG. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * sunxi: Fix UART console index for A33-OLinuXinoChen-Yu Tsai2017-12-071-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A33-OLinuXino defconfig was using the default CONS_INDEX value for A33, which actually points to the R_UART, which is routed to the GPIO header without proper pull-ups or diodes. The board has a separate header for UART0, which are routed to pins PB0 and PB1. This header is properly marked and is likely the first pins any user would try to get a console. Fix CONS_INDEX in the defconfig so the console appears on UART0. Fixes: ca5c37026be4 ("sunxi: Add support for A33-OLinuXino board") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sunxi: Fix A20-OLinuXino-MICRO LAN8710 supportStefan Mavrodiev2017-12-072-0/+2
| | | | | | | | | | | | | | | | | | | | | | >From revision J the board uses new phy chip LAN8710. Compared with RTL8201, RA17 pin is TXERR. It has pullup which causes phy not to work. To fix this PA17 is muxed with GMAC function. This makes the pin output-low. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
| * sun50i: h5: Add NanoPi Neo Plus2 DT initial supportAntony Antony2017-11-211-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial DT for NanoPi NEO Plus2 by FriendlyARM - Allwinner quad core H5 Cortex A53 with an ARM Mali-450MP GPU - 1 GB DDR3 RAM - 8GB eMMC flash (Samsung KLM8G1WEPD-B031) - micro SD card slot - Gigabit Ethernet (external RTL8211E-VB-CG chip) - 802.11 b/g/n WiFi, Bluetooth 4.0 (Ampak AP6212A module) - 2x USB 2.0 host ports Signed-off-by: Antony Antony <antony@phenome.org> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | configs: Resync with savedefconfigTom Rini2017-12-1860-222/+114
| | | | | | | | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge git://git.denx.de/u-boot-rockchipTom Rini2017-12-182-0/+3
|\ \
| * | rockchip: firefly-rk3399: add FIT for rk3399Kever Yang2017-12-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable SPL_FIT_GENERATOR with path for it. With this patch you can get u-boot.itb for rk3399-firefly with: > make u-boot.itb Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Mark Kettenis <kettenis@openbsd.org> Tested-by: Mark Kettenis <kettenis@openbsd.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
| * | rockchip: update ROCKCHIP_SPL_RESERVE_IRAM to 0Kever Yang2017-12-182-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Only rk3399 atf need ROCKCHIP_SPL_RESERVE_IRAM. This commit updates its default setting to 0 so that other SoCs do not need to define it. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-12-182-0/+2
|\ \ \
| * | | arm64: ls1012afrdm: Add distro boot supportRajesh Bhagat2017-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD and USB) and execute autoboot script. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | arm64: ls1012ardb: Add distro boot supportRajesh Bhagat2017-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Include common config_distro_defaults.h and config_distro_bootcmd.h for u-boot enviroments to support automatical distro boot which scan boot.scr from external storage devices(e.g. SD and USB) and execute autoboot script. Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | | Merge tag 'xilinx-for-v2018.01-rc2-v2' of ↵Tom Rini2017-12-1825-8/+97
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://www.denx.de/git/u-boot-microblaze Xilinx changes for v2018.01-rc2-v2 fpga: - Enable loading bitstream via fit image for !xilinx platforms zynq: - Fix SPL SD boot mode zynqmp: - Not not reset in panic - Do not use simple allocator because of fat changes - Various dt chagnes - modeboot variable setup - Fix fpga loading on automotive devices - Fix coverity issues test: - Fix env test for !hush case - Stephen's patch
| * | | arm64: zynqmp: Dont use 4K sector erase by default for spi-flashesSiva Durga Prasad Paladugu2017-12-186-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Dont use 4K sector erase by default, Disabling this would use 64K sector erase and decreases erase time. Also disabled by the fact that UBIFS and JFFS2 won't work with 4K sector erase. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Enable spi flashesMichal Simek2017-12-186-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enabling all spi flashes because some of these boards can have different flashes compared to public version. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Enable fpga bitstream loadingMichal Simek2017-12-147-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | Enable fpga loadb and loadbp for zynqmp platforms. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Enable SPL ram supportMichal Simek2017-12-147-0/+14
| | | | | | | | | | | | | | | | Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Enable misc devicesMichal Simek2017-12-148-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | Enable misc devices for zynqmp targets. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Enable clock command for all boardsMichal Simek2017-12-148-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | clk command provides an option to see actual clock setting. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm64: zynqmp: Do not use SPL_SYS_MALLOC_SIMPLE allocatorMichal Simek2017-12-148-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This was caused by: "fs/fat: Reduce stack usage" (sha1:2460098cffacd18729262e3ed36656e6943783ed) which converted fat code to use malloc. But simple malloc is not freeing space that's why full malloc implementation is needed. Malloc space is added to RAM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | arm: zynq: Fix SPL SD boot modeMichal Simek2017-12-1417-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is fixing two issues: 1. Insufficient stack size for fat fs buffers 2. Insufficient space in malloc area Tested on zc702 and zc706. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-shTom Rini2017-12-132-0/+117
|\ \ \ \
| * | | | ARM: rmobile: Add R8A77995 D3 Draak boardMarek Vasut2017-12-091-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add bits to support yet another board, the R8A77995 D3 Draak. The DT file is from Linux 4.15-rc1 , commit b35334447513c14a4dd55a67c269a743d4a4824b . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | ARM: rmobile: Add R8A77970 V3M Eagle boardMarek Vasut2017-12-091-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add bits to support yet another board, the R8A77970 V3M Eagle. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | | | Merge git://git.denx.de/u-boot-samsungTom Rini2017-12-131-1/+1
|\ \ \ \ \ | |_|/ / / |/| | | |
| * | | | ARM: Samsung: Add Exynos5422-based Odroid HC1 supportMarek Szyprowski2017-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI, no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO button. USB3.0 ports are used for build-in JMicron USB to SATA bridge and Gigabit R8152 ethernet chips. HC1 uses only passive cooling. This patch also updates Odroid's ADCmax array and reduces ADC tolerance to 1% to ensure that XU4 and HC1 revisions are properly detected. I've tested this with XU3, XU3-lite, XU4 and HC1 boards. In case of my test boards I got following values from ADC register: 372, 370, 1281 and 1313. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | | | omap3_logic: Increase CMD_SPL_WRITE_SIZEAdam Ford2017-12-121-0/+1
| |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | The SPL-OS partition is 0x20000, so let's make CONFIG_CMD_SPL_WRITE_SIZE same size. This should allow for better falcon mode operation. Signed-off-by: Adam Ford <aford173@gmail.com>
* | | | ata: Migrate CONFIG_MVSATA_IDE to KconfigTuomas Tynkkynen2017-12-1222-0/+22
| | | | | | | | | | | | | | | | Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | | ata: Migrate CONFIG_SCSI_AHCI to KconfigTuomas Tynkkynen2017-12-1256-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | And use 'imply' liberally. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | | ata: Migrate CONFIG_DWC_AHSATA to KconfigTuomas Tynkkynen2017-12-1223-0/+23
| | | | | | | | | | | | | | | | Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | | ata: Migrate CONFIG_FSL_SATA to KconfigTuomas Tynkkynen2017-12-124-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use 'imply' here liberally to avoid the combinatorial explosion of defconfig changes in the PowerPC boards. Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | | ata: Migrate CONFIG_SATA_MV to KconfigTuomas Tynkkynen2017-12-122-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | | ata: Migrate CONFIG_SATA_SIL3114 to KconfigTuomas Tynkkynen2017-12-123-0/+3
| |/ / |/| | | | | | | | Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
* | | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-12-078-4/+105
|\ \ \
| * | | armv8: LS2080A_SECURE_BOOT: Enable CONFIG_FSL_LS_PPA.Udit Agarwal2017-12-062-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds config CONFIG_FSL_LS_PPA and CONFIG_FSL_CAAM in LS2080AQDS and LS2080ARDB secure boot defconfig. Removes CONFIG_FIT, as with CONFIG_FSL_LS_PPA enabled, CONFIG_FIT is selected. Removes CONFIG_SPL_RSA as in NOR boot SPL boot is not done. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | armv8: LS1088A_QSPI: Add secure boot defconfigs for QSPI boot.Udit Agarwal2017-12-062-0/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the secure boot defconfigs for QSPI boot on LS1088ARDB and LS1088AQDS platforms. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Vinitha Pillai-B57223 <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | | armv8: ls1088a: Unset USE_BOOTCOMMAND in defconfigAshish Kumar2017-12-064-0/+4
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | Unset USE_BOOTCOMMAND for all ls1088 defconfig files to fix redefinition error. USE_BOOTCOMMAND was introduced in commit b6251db8c3f ("Kconfig: Introduce USE_BOOTCOMMAND and migrate BOOTCOMMAND"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | log: sandbox: Enable loggingSimon Glass2017-12-071-0/+3
| | | | | | | | | | | | | | | | | | | | | Enable all logging features on sandbox so that the tests can be run. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* | | sandbox: Adjust pre-console address to avoid conflictSimon Glass2017-12-071-1/+1
|/ / | | | | | | | | | | | | | | | | | | We cannot use sandbox memory at 0 since other things use memory at that address. Move it up out of the way. Note that the pre-console buffer is currently disabled with sandbox, but this change will avoid confusion if it is manually enabled. Signed-off-by: Simon Glass <sjg@chromium.org>
* | omap3: evm: Explicitly use DISTRO_DEFAULTS features at startupDerald D. Woods2017-12-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | [primary] Check MMC 0:1 for /extlinux/extlinux.conf and boot [fallback 1] Check MMC 0:1 zImage and run mmcbootz [fallback 2] Check MMC 0:1 uImage and run mmcboot [fallback 3] Check NAND partitions and run nandboot If 'extlinux.conf' is not found on MMC 0, the previous boot behavior is followed. Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
* | ARM: arch-meson: build memory banks using reported memory from registersNeil Armstrong2017-12-044-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As discussed at [1], the Amlogic Meson GX SoCs can embed a BL31 firmware and a secondary BL32 firmware. Since mid-2017, the reserved memory address of the BL31 firmware was moved and grown for security reasons. But mainline U-Boot and Linux has the old address and size fixed. These SoCs have a register interface to get the two firmware reserved memory start and sizes. This patch adds a dynamic reservation of the memory zones in the device tree bootmem reserved memory zone used by the kernel in early boot. To be complete, the memory zones are also added to the EFI reserved zones. Depends on patchset "Add support for Amlogic GXL Based SBCs" at [2]. [1] http://lists.infradead.org/pipermail/linux-amlogic/2017-October/004860.html [2] http://lists.infradead.org/pipermail/linux-amlogic/2017-November/005410.html Changes since v1: - switched the #if to if(IS_ENABLED()) to compile all code paths - renamed function to meson_board_add_reserved_memory() - added a mem.h header with comment - updated all boards ft_board_setup() Changes since RFC v2: - reduced preprocessor load - kept Odroid-C2 static memory mapping as exception Changes since RFC v1: - switch to fdt rsv mem table and efi reserve memory - replaced in_le32 by readl() Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [trini: Fix warning on khadas-vim over missing <asm/arch/mem.h> Signed-off-by: Tom Rini <trini@konsulko.com>
* | arm: Add Khadas VIM support based on Meson GXL familyNeil Armstrong2017-12-041-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds platform code for the Khadas VIM board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-khadas-vim.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | arm: Add LibreTech CC support based on Meson GXL familyNeil Armstrong2017-12-041-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds platform code for the Libre Computer CC "Le Potato" board based on a Meson GXL (S905X) SoC with the Meson GXL configuration. This initial submission supports UART, MMC/SDCard and Ethernet with the Internal RMII PHY. The meson-gxl-s905x-libretech-cc.dts is synchronised from the linux 4.13 stable tree as of 4.13.8. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | add support for Raspberry Pi Zero WDmitry Korunov2017-12-041-0/+28
| | | | | | | | Signed-off-by: Dmitry Korunov <dessel.k@gmail.com>
* | rockchip: rk3128: add defconfig for evb-rk3128Kever Yang2017-11-301-0/+56
| | | | | | | | | | | | | | | | | | Enable board config for evb-rk3128. Serial output and eMMC works in this version. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-shTom Rini2017-11-304-2/+30
|\ \
| * | ARM: rmobile: Rework the ULCB CPLD driverMarek Vasut2017-11-302-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Rework the ULCB CPLD driver and make it into a sysreset driver, since that is what the ULCB CPLD driver is mostly for. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Migrate boards to RCar IIC driversMarek Vasut2017-11-304-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Stop using the old ad-hoc SH I2C driver and use the new RCar IIC driver instead. The SH I2C driver should be deprecated and removed eventually. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | ARM: rmobile: Use PRR driver on all Gen3 boardsMarek Vasut2017-11-304-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Mark the PRR as u-boot,dm-pre-reloc in all Gen3 board DTs as it is needed very early and turn on the CONFIG_SYSCON to allow the PRR driver to bind as a syscon uclass. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
View Lorry Controller Status