summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* arm: mvebu: gdsys: Remove custom spl_board_init()Pali Rohár2021-07-311-1/+0
| | | | | | | | | | | | | The gdsys a38x config file (controlcenterdc_defconfig) uses BootROM to load U-Boot proper. Since it is now possible to do this via U-Boot SPL framework, we do not need to provide custom spl_board_init() which calls return_to_bootrom(). Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de>
* arm: mvebu: Load U-Boot proper binary in SPL code based on kwbimage headerPali Rohár2021-07-3112-13/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that proper load and execution addresses are set in v1 kwbimage we can use it for loading and booting U-Boot proper. Use the new spl_parse_board_header() function to implement parsing the kwbimage v1 header. Use information from this header to locate offset and size of the U-Boot proper binary, instead of using the legacy U-Boot header which is prepended to the U-Boot proper binary stored at fixed offset. This has the advantage that we do not need to relay on legacy U-Boot header anymore and therefore U-Boot proper binary can be stored at any offset, as is the case when loading & booting U-Boot proper by BootROM. The CONFIG_SYS_U_BOOT_OFFS option is therefore not used by SPL code anymore. Also allow to compile U-Boot SPL without CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_MMC_SUPPORT or CONFIG_SPL_SATA_SUPPORT set. In this case BootROM is used for loading and executing U-Boot proper. This reduces the size of U-Boot's SPL image. By default these config options are enabled and so BootROM loading is not used. In some cases BootROM reads from SPI NOR at lower speed than U-Boot SPL. So people can decide whether they want to have smaller SPL binary at the cost of slower boot. Therefore dependency on CONFIG_SPL_DM_SPI, CONFIG_SPL_SPI_FLASH_SUPPORT, CONFIG_SPL_SPI_LOAD, CONFIG_SPL_SPI_SUPPORT, CONFIG_SPL_DM_GPIO, CONFIG_SPL_DM_MMC, CONFIG_SPL_GPIO_SUPPORT, CONFIG_SPL_LIBDISK_SUPPORT, CONFIG_SPL_MMC_SUPPORT, CONFIG_SPL_SATA_SUPPORT and CONFIG_SPL_LIBDISK_SUPPORT is changed from strict to related "imply" (which can be selectivelly turned off and causes booting via BootROM). Options CONFIG_SYS_SPI_U_BOOT_OFFS, CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR and CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET have to to be set to zero as they define the location where kwbimage header starts. It is the location where BootROM expects start of the kwbimage from which it reads, parses and executes SPL part. The same applies to option CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR, which has to be set to one. Update all config files to set correct values of these options and set CONFIG_SYS_U_BOOT_OFFS to the correct value - the offset where U-Boot proper starts. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Stefan Roese <sr@denx.de>
* Merge tag 'ti-v2021.10-rc2' of ↵Tom Rini2021-07-297-9/+42
|\ | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-ti - Add MMC High speed modes for AM64 and J7200 - Add Sierra/Torrent SERDES driver - Minor clean-ups for R5F boot from SPL
| * configs: j721e_evm_r5: Disable K3 R5F remoteprocSuman Anna2021-07-271-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | The J721E R5 SPL will no longer support booting of the Main R5FSS Core0 after the R5 SPL re-architecture for System Firmware split. The MCU R5F branch-only boot does not use the K3 R5F remoteproc driver, and relies only on the filesystem (FS) support for now. The K3 R5F remoteproc driver is therefore no longer needed in R5 SPL, so drop it from the J721E R5 defconfig. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726211311.5977-6-s-anna@ti.com
| * configs: am64x_evm_*_defconfig: Enable config to support gpt and FDT library ↵Aswath Govindraju2021-07-272-0/+3
| | | | | | | | | | | | | | | | | | | | | | overlay Enable config to support gpt command on AM642 evm/sk and enable config for FDT library overlay support Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726152807.22991-7-a-govindraju@ti.com
| * configs: am64x_evm_*_defconfig: Enable configs to support eMMC bootKishon Vijay Abraham I2021-07-272-0/+3
| | | | | | | | | | | | | | | | | | Enable configs to support eMMC boot. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726152807.22991-6-a-govindraju@ti.com
| * configs: am64x_evm: Move CONFIG_SYS_MMC_ENV_DEV and CONFIG_SYS_MMC_ENV_PART ↵Aswath Govindraju2021-07-272-3/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to defconfig files and enable configs to save env in eMMC and FAT write. Kconfig symbols for SYS_MMC_ENV_DEV and SYS_MMC_ENV_PART have been added by commit 7d080773347c1f6e0e896d9284134a2a411155d6. Therefore, move the definitions of configs to corresponding board defconfig files and enable configs to save env in eMMC. Also enable config for FAT write in U-Boot. Fixes: 33b7258947f4 ("board: ti: am64x: Add board support for am64x evm") Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726152807.22991-5-a-govindraju@ti.com
| * configs: am64x_evm_a53_defconfig: Enable configs to support HS200/HS400Kishon Vijay Abraham I2021-07-271-0/+5
| | | | | | | | | | | | | | | | | | Enable configs to support HS200/HS400. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726152807.22991-4-a-govindraju@ti.com
| * configs: am64x_evm_r5_defconfig: Fix CONFIG_SPL_TEXT_BASE to 0x70000000Aswath Govindraju2021-07-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SPL_TEXT_BASE was set to 0x70000000 in the commit, "26f32c32b250 configs: am64x_evm_*_defconfig: Rearrange the components in SRAM to satisfy the limitations for USB DFU boot mode". This change seems to have been dropped during a merge commit. Therefore, fix this by setting CONFIG_SPL_TEXT_BASE to 0x70000000. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210726145840.18977-1-a-govindraju@ti.com
| * configs: j7200_evm_a72: Add CONFIG_PREBOOT to configure ethernet PHYKishon Vijay Abraham I2021-07-271-0/+1
| | | | | | | | | | | | | | | | | | Add CONFIG_PREBOOT to provide an automatic and easier way to configure ethernet PHY before loading the firmware. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-19-kishon@ti.com
| * configs: j7200_evm_a72_defconfig: Add config for torrent serdes and common ↵Aswath Govindraju2021-07-271-0/+7
| | | | | | | | | | | | | | | | | | | | | | clock framework Add config for torrent serdes and common clock framework. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-17-kishon@ti.com
| * configs: j721e_evm_a72_defconfig: Enable the drivers required for the USB3 ↵Jean-Jacques Hiblot2021-07-271-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | support Enable the mmio mux driver, the J721E-wiz PHy driver and the cadence sierra phy driver. All of them are required for USB3 support Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210721155849.20994-16-kishon@ti.com
| * configs: am335x_evm: Support GbE PHYsPaul Barker2021-07-271-0/+1
| | | | | | | | | | | | The SanCloud BeagleBone Enhanced (BBE) includes a Gigabit Ethernet PHY. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
| * arm: dts: Import am335x-sancloud-bbe devicetreePaul Barker2021-07-271-1/+1
| | | | | | | | | | | | | | This device tree is imported from Linux 5.13.1 and enabled via the am335x board file and the am335x evm defconfig. Signed-off-by: Paul Barker <paul.barker@sancloud.com>
| * configs: j7200_evm_*_defconfig: Enable configs for HS400 supportAswath Govindraju2021-07-272-3/+3
| | | | | | | | | | | | | | | | Enable configs to add support for HS400 speed mode. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Link: https://lore.kernel.org/r/20210525093826.10390-4-a-govindraju@ti.com
* | i2c: Rename SPL/TPL_I2C_SUPPORT to I2CSimon Glass2021-07-28259-259/+259
| | | | | | | | | | | | | | Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Heiko Schocher <hs@denx.de>
* | Rename DRIVERS_MISC_SUPPORT to DRIVERS_MISCSimon Glass2021-07-28130-137/+137
| | | | | | | | | | | | Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename GPIO_SUPPORT to GPIOSimon Glass2021-07-28163-163/+163
| | | | | | | | | | | | Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename SPL_USB_HOST_SUPPORT to SPL_USB_HOSTSimon Glass2021-07-2834-34/+34
| | | | | | | | | | | | Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename SPL_WATCHDOG_SUPPORT to SPL_WATCHDOGSimon Glass2021-07-2896-96/+96
| | | | | | | | | | | | Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename SPL_MUSB_NEW_SUPPORT to SPL_MUSB_NEWSimon Glass2021-07-283-3/+3
| | | | | | | | | | | | Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename SPL_ETH_SUPPORT to SPL_ETHSimon Glass2021-07-284-4/+4
| | | | | | | | | | | | Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename SPL_CRYPTO_SUPPORT to SPL_CRYPTOSimon Glass2021-07-285-5/+5
| | | | | | | | | | | | Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | Rename SPL_POWER_SUPPORT to SPL_POWERSimon Glass2021-07-2875-75/+75
| | | | | | | | | | | | | | Rename this option so that CONFIG_IS_ENABLED can be used with it. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
* | Makefile: Move phy rules into drivers/phySimon Glass2021-07-2810-0/+10
| | | | | | | | | | | | | | | | | | These don't belong in the drivers Makefile so move them down into the correct place. Signed-off-by: Simon Glass <sjg@chromium.org> [trini: Fixup some missing dependencies this exposed] Signed-off-by: Tom Rini <trini@konsulko.com>
* | test: cmd: setexpr: add format string testsRoland Gaudig2021-07-271-0/+1
| | | | | | | | | | | | | | | | Add test cases for the setexpr format string operator. Signed-off-by: Roland Gaudig <roland.gaudig@weidmueller.com> [trini: Enable on sandbox] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge tag 'u-boot-amlogic-20210727' of ↵Tom Rini2021-07-274-0/+8
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | https://source.denx.de/u-boot/custodians/u-boot-amlogic - Add SMBIOS info for Khadas VIM boards - Fix meson-axg-mipi PHY build - Fix VIM3 board phy-names property setup - Return correct value for non emmc boot sources on VIM3 - add kernel compression vars
| * | configs: Enable SMBIOS for Khadas VIM boardsArtem Lapkin2021-07-274-0/+8
| |/ | | | | | | | | | | | | | | Enable configs to support SMBIOS for all Khadas VIM boards Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Artem Lapkin <art@khadas.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* | configs: Resync with savedefconfigTom Rini2021-07-26631-1192/+205
|/ | | | | | Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com>
* arm64: zynqmp: Enable reset and poweroff via sysreset frameworkMichal Simek2021-07-261-0/+3
| | | | | | | | | | reset and poweroff are called via hooks in psci driver which is going around sysreset framework that's why enable sysreset drivers and do reset and poweroff via this framework. Using this flow will allow us to call SYSTEM_WARM_RESET based on psci 1.1 spec which can be calles with reset -w command. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* xilinx: versal: Enable Xilinx AXI MRMACAshok Reddy Soma2021-07-261-0/+1
| | | | | | | | Enable Xilinx AXI MRMAC for Versal platforms. Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* board: dragonboard410c: Fix fastbootStephan Gerhold2021-07-231-0/+1
| | | | | | | | | | | | | | | | | | | | | | At the moment pressing the volume down key does not actually launch fastboot. This is because setting "bootdelay" to "-1" actually disables autoboot and drops to the U-Boot console. It does not execute the "bootcmd". The correct value for "bootdelay" here would be "-2", which disables the delay and key checking and would immediately execute the "bootcmd". However, even better in this case is using "preboot" to trigger Fastboot. The advantage is that running "fastboot continue" will actually continue the autoboot process instead of ending up in the U-Boot shell. Also make sure to unset "preboot" again immediately in case the user saves the environment after triggering fastboot. Cc: Ramon Fried <rfried.dev@gmail.com> Fixes: aa043ee91a47 ("db410c: automatically launch fastboot") Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
* board: dragonboard410c: Load U-Boot directly without LKStephan Gerhold2021-07-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At the moment the U-Boot port for the DragonBoard 410c is designed to be loaded as an Android boot image after Qualcomm's Little Kernel (LK) bootloader. This is simple to set up but LK is redundant in this case, since everything done by LK can be also done directly by U-Boot. Dropping LK entirely has at least the following advantages: - Easier installation/board code (no need for Android boot images) - (Slightly) faster boot - Boot directly in 64-bit without a round trip to 32-bit for LK So far this was not possible yet because of unsolved problems: 1. Signing tool: The firmware expects a "signed" ELF image with extra (Qualcomm-specific) ELF headers, usually used for secure boot. The DragonBoard 410c does not have secure boot by default but the extra ELF headers are still required. 2. PSCI bug: There seems to be a bug in the PSCI implementation (part of the TrustZone/tz firmware) that causes all other CPU cores to be started in 32-bit mode if LK is missing in the boot chain. This causes Linux to hang early during boot. There is a solution for both problems now: 1. qtestsign (https://github.com/msm8916-mainline/qtestsign) can be used as a "signing" tool for U-Boot and other firmware. 2. A workaround for the "PSCI bug" is to execute the TZ syscall when entering U-Boot. That way PSCI is made aware of the 64-bit switch and starts all other CPU cores in 64-bit mode as well. Simplify the dragonboard410c board by removing all the extra code that is only used to build an Android boot image that can be loaded by LK. This allows dropping the custom linker script, special image magic, as well as most of the special build/installation instructions. CONFIG_REMAKE_ELF is used to build a new ELF image that has both U-Boot and the appended DTB combined. The resulting u-boot.elf can then be passed to the "signing" tool (e.g. qtestsign). The PSCI workaround is placed in the "boot0" hook that is enabled with CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK. The extra check for EL1 allows compatibility with custom firmware that enters U-Boot in EL2 or EL3, e.g. qhypstub (https://github.com/msm8916-mainline/qhypstub). As a first step these changes apply only to DragonBoard410c. Similar changes could likely also work for the DragonBoard 820c. Note that removing LK wouldn't be possible that easily without a lot of work already done three years ago by Ramon Fried. A lot of missing initialization, pinctrl etc was already added back then even though it was not strictly needed yet. Cc: Ramon Fried <rfried.dev@gmail.com> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
* configs: synquacer: Ignore OsIndications on DeveloperBoxMasami Hiramatsu2021-07-231-0/+1
| | | | | | | | | Since we can not set OsIndications from Runtime Services SetVariables at this moment, it is better to ignore the OsIndications if there is any capsule file in the correct place. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
* configs: synquacer: Use RAW capsule image instead of FITMasami Hiramatsu2021-07-231-1/+1
| | | | | | | | | | | | | Since the recent commit; commit b891ff18f899 ("efi_loader: Force a single FMP instance per hardware store") forces a single FMP instances for a storage, we can not enable both RAW and FIT capsule image support at once. Since RAW capsule image support is simpler than FIT, enable RAW capsule image instead of FIT by default. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
* configs: synquacer: Enable UEFI secure bootMasami Hiramatsu2021-07-231-0/+1
| | | | | | | Enable UEFI secure boot on synquacer. Note that unless user setup their keys, the secure boot will not work. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
* configs: synquacer: Drop Ext2/4 support by defaultMasami Hiramatsu2021-07-231-2/+0
| | | | | | | | Since the U-Boot for the SynQuacer DeveloperBox is designed for compatible with EDK2 boot, we don't need to support Ext2/4 fs support by default. Drop it. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
* configs: synquacer: Remove mtdparts settings and update DFU settingMasami Hiramatsu2021-07-231-2/+0
| | | | | | | Since MTD partitions are based on the devicetree name, remove unneeded mtdparts settings and update DFU setting. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
* configs: synquacer: Make U-Boot binary position independentMasami Hiramatsu2021-07-231-1/+2
| | | | | | | | Make the U-Boot binary for SynQuacer position independent so that the previous bootloader (SCP firmware or BL2) can load the U-Boot anywhere. Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org>
* test: add first autoboot unit testsSteffen Jaeckel2021-07-231-0/+10
| | | | | | | | This adds tests for the crypt-based and plain SHA256-based password hashing algorithms in the autoboot flow. Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de> Reviewed-by: Simon Glass <sjg@chromium.org>
* reboot-mode: read the boot mode from RTC memoryNandor Han2021-07-231-0/+1
| | | | | | | | | | | RTC devices could provide battery-backed memory that can be used for storing the reboot mode magic value. Add a new reboot-mode back-end that uses RTC to store the reboot-mode magic value. The driver also supports both endianness modes. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* reboot-mode: read the boot mode from GPIOs statusNandor Han2021-07-231-0/+2
| | | | | | | | | | | | | | | A use case for controlling the boot mode is when the user wants to control the device boot by pushing a button without needing to go in user-space. Add a new backed for reboot mode where GPIOs are used to control the reboot-mode. The driver is able to scan a predefined list of GPIOs and return the magic value. Having the modes associated with the magic value generated based on the GPIO values, allows the reboot mode uclass to select the proper mode. Signed-off-by: Nandor Han <nandor.han@vaisala.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini2021-07-2277-0/+80
|\ | | | | | | | | | | fsl-qoriq: Update mc firmware size, address in LS1088A, LS2088A, LX2 Updates on ls1043aqds, ls1043ardb Refactor I2C MUX Code on fsl-qoriq platforms.
| * configs: ls1043aqds: Configure environment related configsKuldeep Singh2021-07-203-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | LS1043A-QDS board requires updation in few environment configs in TFA and QSPI defconfigs. Following are the changes: - Define CONFIG_ENV_ADDR - Unset CONFIG_SPI_FLASH_BAR - Enable CONFIG_SYS_RELOC_GD_ENV_ADDR Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * configs: ls1046ardb: enable PHY_FIXEDCamelia Groza2021-07-208-0/+8
| | | | | | | | | | | | | | | | The optical 10G port is described as fixed-link in the device tree. Enable the necessary support. Signed-off-by: Camelia Groza <camelia.groza@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * board: freescale: t2080qds: Update I2C mux configStephen Carlson2021-07-206-0/+6
| | | | | | | | | | | | | | Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * board: freescale: lx2160a: Update I2C mux configStephen Carlson2021-07-208-0/+8
| | | | | | | | | | | | | | Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * board: freescale: ls2080a, ls2088a: Update I2C mux configStephen Carlson2021-07-2014-0/+14
| | | | | | | | | | | | | | | | Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> [Squashed ls2088a patch to fix compilation] Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * board: freescale: ls1088a: Update I2C mux configStephen Carlson2021-07-2012-0/+12
| | | | | | | | | | | | | | Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * board: freescale: ls1046a: Update I2C mux configStephen Carlson2021-07-2011-0/+11
| | | | | | | | | | | | | | Updates the board configuration to enable use of the PCA9547 I2C mux. Signed-off-by: Stephen Carlson <stcarlso@linux.microsoft.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
View Lorry Controller Status