summaryrefslogtreecommitdiff
path: root/configs
Commit message (Collapse)AuthorAgeFilesLines
* coral: Enable the copy framebufferSimon Glass2020-07-171-0/+1
| | | | | | | | | | Enable this feature on chromebook_coral to speed up the display. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from 1830ms to 62ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* cmd: fix lsblk commandHeinrich Schuchardt2020-07-161-0/+1
| | | | | | | Add missing includes. Add CMD_LSBLK to sandbox_defconfig. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* omap3_beagle: Finish current outstanding DM migrationsTom Rini2020-07-131-0/+3
| | | | | | | | | | At this point in time we can now remove our legacy code and switch to enabling DM for USB and Ethernet. Cc: Derald D. Woods <woods.technical@gmail.com> Cc: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
* ARM: da850-evm: Unify config options with KconfigAdam Ford2020-07-131-1/+0
| | | | | | | | | | | | | | | | | | | | There are two options that are currently whitelisted, but they are redundant, because there are not necessary since Kconfig options exist to basically state the same thing. CONFIG_DIRECT_NOR_BOOT and CONFIG_USE_NOR are both set together and only used by the da850 when booting from NOR, however the only time CONFIG_MTD_NOR_FLASH is configured is when booting from NOR. Since NOR doesn't need SPL, the options for SPL can be moved to a check for building SPL instead of checking for NOR. This patch removes the checks for these two config options and unifies the checks around the Kconfig option of CONFIG_MTD_NOR_FLASH. Since this board is the only board that uses these two config options, they can be removed from the whitelist table. Signed-off-by: Adam Ford <aford173@gmail.com>
* Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-spiWIP/11Jul2020Tom Rini2020-07-1119-597/+39
|\ | | | | | | | | | | | | - Enable DM_SPI on siemens omap boards (Jagan) - Dropped some non-dm supported omap3 boards (Jagan) - Dropped non-dm code in omap3 spi driver (Jagan) - Dropped non-dm code in kirkwood spi driver (Bhargav)
| * arm: Remove mx31pdk boardJagan Teki2020-07-091-40/+0
| | | | | | | | | | | | | | | | | | | | DM, OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Acked-by: Magnus Lilja <lilja.magnus@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * db-88f6281-bp-nand: Enable DM_SPI/SPI_FLASHJagan Teki2020-07-091-2/+2
| | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for db-88f6281-bp-nand board. Cc: Chris Packham <judge.packham@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove pengwyn boardJagan Teki2020-07-091-68/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Lothar Felten <lothar.felten@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove pepper boardJagan Teki2020-07-091-43/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Ash Charles <ash@gumstix.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove bav335x boardJagan Teki2020-07-092-138/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Gilles Gameiro <gilles@gigadevices.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove cairo boardJagan Teki2020-07-091-40/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * logicpd: Drop omap3 zoom1Jagan Teki2020-07-091-41/+0
| | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove overo boardJagan Teki2020-07-092-95/+0
| | | | | | | | | | | | | | | | | | | | | | OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board. Drop it. Cc: Ash Charles <ash@gumstix.com> Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove cm_t35 boardJagan Teki2020-07-091-65/+0
| | | | | | | | | | | | | | | | | | | | DM, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * arm: Remove cm_t54 boardJagan Teki2020-07-091-53/+0
| | | | | | | | | | | | | | | | | | | | DM, DM_SPI and other driver model migration deadlines are expired for this board. Remove it. Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * siemens: rut: Enable DM_SPI, DM_SPI_FLASHJagan Teki2020-07-091-2/+6
| | | | | | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for siemens rut board. Build is fine, but not tested. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * siemens: pxm2: Enable DM_SPI, DM_SPI_FLASHJagan Teki2020-07-091-2/+6
| | | | | | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for siemens pxm2 board. Build is fine, but not tested. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * siemens: thuban: Enable DM_SPI, DM_SPI_FLASHJagan Teki2020-07-091-2/+6
| | | | | | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for siemens thuban board. Build is fine, but not tested. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * siemens: rastaban: Enable DM_SPI, DM_SPI_FLASHJagan Teki2020-07-091-2/+6
| | | | | | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for siemens rastaban board. Build is fine, but not tested. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * siemens: etamin: Enable DM_SPI, DM_SPI_FLASHJagan Teki2020-07-091-2/+6
| | | | | | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for siemens etamin board. Build is fine, but not tested. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * siemens: draco: Enable DM_SPI, DM_SPI_FLASHJagan Teki2020-07-091-2/+6
| | | | | | | | | | | | | | | | | | Enable DM_SPI, DM_SPI_FLASH for siemens draco board. Build is fine, but not tested. Cc: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
| * am335x: igep003x: Enable DM_SPIJagan Teki2020-07-091-0/+1
| | | | | | | | | | | | | | | | | | Enable DM_SPI for am355x igep003x board. Build is fine, but not tested. Cc: Javier Martínez Canillas <javier@dowhile0.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* | ARM: uniphier: remove support for NOR Flash on support cardMasahiro Yamada2020-07-113-9/+0
| | | | | | | | | | | | | | I actually do not see this used these days because eMMC or NAND is used for non-volatile devices. Dump the burden to maintain this crappy code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | ARM: uniphier: consolidate SoC select menuMasahiro Yamada2020-07-111-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the supports for the following two ARMv7 SoC groups are exclusive, because the boot ROM loads the SPL to a different address: - LD4, sLD8 (SPL is loaded at 0x00040000) - Pro4, Pro5, PXs2, LD6b (SPL is loaded at 0x00100000) This limitation exists only when CONFIG_SPL=y. Instead of using crappy CONFIG options, checking SPL and SPL_TEXT_BASE is cleaner. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | Merge tag 'rpi-next-2020.10' of ↵WIP/10Jul2020-bTom Rini2020-07-103-1/+20
|\ \ | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-raspberrypi - add support for PCI and XHCI for RPi4 (64 bit only) - optionally reset XHCI device on registration - enable USB_KEYBOARD for rpi_4_defconfig
| * | config: Enable USB Keyboard support on RPi4Nicolas Saenz Julienne2020-07-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Supporting USB keyboards out of the box is both handy for development and production. Notably if u-boot is used to boot into GRUB. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> [mb: drop rpi_4_32b_defconfig hunk] Signed-off-by: Matthias Brugger <mbrugger@suse.com>
| * | configs: Enable support for reset controllers on RPi4Nicolas Saenz Julienne2020-07-103-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This is required in order to access the reset controller used to initialize the board's xHCI chip. Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
| * | configs: Enable support for the XHCI controller on RPI4 board (ARM 64-bit)Marek Szyprowski2020-07-102-1/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Matthias Brugger <mbrugger@suse.com>
* | | config: Enable support for the XHCI controller on RPI4 boardMarek Szyprowski2020-07-101-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This requires enabling BRCMSTB PCIe and XHCI_PCI drivers as well as PCI and USB commands. To get it working one has to call the following commands: "pci enum; usb start;", thus such commands have been added to the default "preboot" environment variable. One has to update their environment if it is already configured to get this feature working out of the box. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
* | | powerpc: move ADDR_MAP to KconfigMarek Szyprowski2020-07-10125-0/+213
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move ADDR_MAP related config options from include/configs/*.h to the proper place in lib/Kconfig. This has been done using ./tools/moveconfig.py and manual inspection of the generated changes. This is a preparation to use ADDR_MAP helper on ARM 32bit Raspberry Pi4 board for mapping the PCIe XHCI MMIO, which is above the 4GiB identity mapping limit. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86WIP/09Jul2020Tom Rini2020-07-094-4/+5
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | - Add two- and three-argument versions of CONFIG_IS_ENABLED in linux/kconfig.h - Adds a new feature which supports copying modified parts of the frame buffer to the uncached hardware buffer - Enable the copy framebuffer on various x86 targets
| * | x86: minnowmax: Drop screen resolution to 1024x768Simon Glass2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This seems like a more reasonable resolution for this board, since it is quite slow. It also allows it to work with a 5" LCD display in my lab. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * | minnowmax: Enable the copy framebufferSimon Glass2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the video driver to support this feature and enable it on minnowmax to speed up the display. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from over 13 seconds to 300ms, at 1280x1024. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
| * | chromebook_link: Enable the copy framebufferSimon Glass2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the video driver to support this feature and enable it on link. Also remove the multi-line scrolling since normal scrolling is fast enough now. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from about 930ms to 29ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | chromebook_samus: Enable the copy framebufferSimon Glass2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the video driver to support this feature and enable it on samus. Also remove the multi-line scrolling since normal scrolling is fast enough now. With this change, the time taken to print the environment to the display without CONFIG_CONSOLE_SCROLL_LINES is reduced from about 430ms to 12ms. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
| * | video: sandbox: Add support for the copy framebufferSimon Glass2020-07-091-0/+1
| |/ | | | | | | | | | | | | | | | | | | Enable this feature on sandbox by updating the SDL driver to have two framebuffers. Update the video tests to check that the copy framebuffer is kept in sync. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Anatolij Gustschin <agust@denx.de>
* | Merge tag 'for-v2020.10' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2cTom Rini2020-07-094-0/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i2c changes for v2020.10 - Add support for I2C controllers found on Octeon II/III and Octeon TX TX2 SoC platforms. - Add I2C controller support for Cortina Access CAxxxx SoCs - new rtc methods, rtc command, and tests - imx_lpi2c: Improve the codes to use private data - stm32f7_i2c.c: Add new compatible "st,stm32mp15-i2c" - stm32f7_i2c.c: Add Fast Mode Plus support - pwm: Add PWM driver for SiFive SoC
| * | sandbox: add rtc command to defconfigsRasmus Villemoes2020-07-093-0/+3
| | | | | | | | | | | | | | | | | | | | | In order to allow adding unit tests of the rtc command, add it to the various sandbox defconfigs. Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
| * | board: presidio-asic: Add I2C supportAlex Nemirovsky2020-07-091-0/+3
| |/ | | | | | | | | | | | | | | Add I2C board support for Cortina Access Presidio Engineering Board Signed-off-by: Alex Nemirovsky <alex.nemirovsky@cortina-access.com> CC: Heiko Schocher <hs@denx.de> Reviewed-by: Heiko Schocher <hs@denx.de>
* | arm: kirkwood: enable DM_ETH for LaCie boardSimon Guinot2020-07-097-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables DM_ETH for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm: kirkwood: enable DM_USB for LaCie boardSimon Guinot2020-07-096-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables DM_USB and USB_STORAGE for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm: kirkwood: switch LaCie boards to sata_mv driverSimon Guinot2020-07-097-18/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch switches the SATA driver from mvsata_ide to sata_mv for the following Kirkwood-based LaCie boards: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm: kirkwood: convert LaCie boards to DM_SPI_FLASHSimon Guinot2020-07-097-14/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch converts the following Kirkwood-based LaCie boards to DM, DM_SPI and DM_SPI_FLASH: - d2 Network v2 - Internet Space v2 - 2Big Network v2 - Network Space v2 - Network Space Lite v2 - Network Space Max v2 - Network Space Mini v2 Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
* | arm: mvebu: helios4: sync helios4 config to clearfog and dts to kernelDennis Gilmore2020-07-091-6/+14
|/ | | | | | | | | | | The helios4 is built on the same microsom as the clearfog, by syncing the config we enable the same featureset that exists in the som on the helios4. The current config does not boot as some of the clearfog changes needed to be made on the helios4 also, generally speaking most changes for the clearfog should also be made on the helios4. Signed-off-by: Dennis Gilmore <dennis@ausil.us> Reviewed-by: Stefan Roese <sr@denx.de>
* Merge tag 'u-boot-amlogic-20200708' of ↵WIP/08Jul2020Tom Rini2020-07-082-1/+63
|\ | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - Add proper Odroid-N2 board support code - Add support for Odroid-C4 single board computer
| * boards: amlogic: add Odroid C4 supportChristian Hewitt2020-07-081-0/+62
| | | | | | | | | | | | | | | | | | | | Odroid C4 is an Amlogic SM1 device, the board config and board documentation are adapted from the Odroid-N2 support from the same vendor. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> [narmstrong: fix odroid-c4.rst typos and structure] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
| * board: amlogic: Add Odroid-N2 board supportPascal Vizeli2020-07-081-1/+1
| | | | | | | | | | | | | | | | | | Add a proper Odroid-N2 board support to handle the Ethernet MAC address stored in the in-SoC eFuses. Signed-off-by: Pascal Vizeli <pvizeli@syshack.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Anand Moon <linux.amoon@gmail.com>
* | gpio: fix test.py for gpio label lookupHeiko Schocher2020-07-083-0/+3
| | | | | | | | | | | | | | | | | | | | commit 2bd261dd1712 ("gpio: search for gpio label if gpio is not found through bank name") disabled DM_GPIO_LOOKUP_LABEL which is needed in sandbox defconfigs, as we have tests for this functionality. Signed-off-by: Heiko Schocher <hs@denx.de>
* | Merge tag 'u-boot-rockchip-20200708' of ↵WIP/07Jul2020Tom Rini2020-07-074-1/+125
|\ \ | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - dts sync from kernel for rk3399 boards; - Add Radxa Rock Pi N8, N10; - Some feature update for Pinebook Pro;
| * | ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki2020-07-071-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
View Lorry Controller Status