summaryrefslogtreecommitdiff
path: root/drivers/net/zynq_gem.c
Commit message (Collapse)AuthorAgeFilesLines
* dm: Rename dev_addr..() functionsSimon Glass2017-06-011-1/+1
| | | | | | | | | | | | | | | | | | | These support the flat device tree. We want to use the dev_read_..() prefix for functions that support both flat tree and live tree. So rename the existing functions to avoid confusion. In the end we will have: 1. dev_read_addr...() - works on devices, supports flat/live tree 2. devfdt_get_addr...() - current functions, flat tree only 3. of_get_address() etc. - new functions, live tree only All drivers will be written to use 1. That function will in turn call either 2 or 3 depending on whether the flat or live tree is in use. Note this involves changing some dead code - the imx_lpi2c.c file. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge tag 'xilinx-for-v2017.05' of git://www.denx.de/git/u-boot-microblazeTom Rini2017-03-161-18/+11
|\ | | | | | | | | | | | | Xilinx changes for v2017.05 - Move to DM clk driver - Add clk support for zynq_sdhci
| * zynq: Move zynq to clock frameworkStefan Herbrechtsmeier2017-02-171-9/+0
| | | | | | | | | | | | | | | | Move the zynq to clock framework and remove unused functions as well as the CONFIG_ZYNQ_PS_CLK_FREQ configuration. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * net: zynq: Add clk framework support to zynq ethernet driverStefan Herbrechtsmeier2017-02-171-7/+15
| | | | | | | | | | | | | | | | | | If available use the clock framework to set the tx clock rate of the zynq ethernet controller. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * net: zynq: Don't overwrite gem_rclk_ctrl with default valueStefan Herbrechtsmeier2017-02-171-11/+5
| | | | | | | | | | | | | | | | | | | | The gem[0-1]_rclk_ctrl registers control the source of the rx clock, control and data signals and configure via ps7_init function. Don't overwrite the register with the default value. Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: zynq_gem: Fix masking of supported phydev featuresNathan Rossi2017-03-071-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | When the zynq_gem driver initializes the phy it sets the supported features that the phy can support and advertise. However instead of masking the supported features such that it limits the available features it sets the phy to have the exact supported features of the zynq_gem. This is problematic as it will enable features that a phy does not have or cannot advertise. Specifically this appears as an issue when using a phy that is only capable of 10/100, but the zynq_gem driver will override this and try to enable and advertise 10/100/1000. Reported-by: Arno Steffens <star@gmx.li> Fixes: 80243528ef ("net: gem: Fix gem driver on 1Gbps LAN") Signed-off-by: Nathan Rossi <nathan@nathanrossi.com> Tested-by: Arno Steffens <star@gmx.li> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* dm: core: Replace of_offset with accessorSimon Glass2017-02-081-5/+6
| | | | | | | | | At present devices use a simple integer offset to record the device tree node associated with the device. In preparation for supporting a live device tree, which uses a node pointer instead, refactor existing code to access this field through an inline function. Signed-off-by: Simon Glass <sjg@chromium.org>
* net: zynq_gem: Use clock driver for ZynqMPSiva Durga Prasad Paladugu2017-01-101-0/+18
| | | | | | | | | Enable and use the clock driver routine defined in clock driver toset required clock appropriately. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Use wait_for_bit() instead of private mdio_wait()Michal Simek2017-01-101-23/+9
| | | | | | | Using generic wait_for_bit() implementation instead of using private wait function. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: xilinx: Use mdio_register_seq() to support multiple instancesMichal Simek2016-12-201-2/+1
| | | | | | | | | | | | axi_emac, emaclite and gem have the same issue with registering multiple instances with mdio busses. mdio bus name has to be uniq but drivers are setting up only one name for all. Use mdio_register_seq() and pass dev->seq number to allow multiple mdio instances registration. Reported-by: Phani Kiran Kara <phanikiran.kara@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini2016-12-091-1/+2
| | | | | This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
* net: xilinx: Use mdio_register_seq() to support multiple instancesMichal Simek2016-12-081-2/+1
| | | | | | | | | | | | | axi_emac, emaclite and gem have the same issue with registering multiple instances with mdio busses. mdio bus name has to be uniq but drivers are setting up only one name for all. Use mdio_register_seq() and pass dev->seq number to allow multiple mdio instances registration. Reported-by: Phani Kiran Kara <phanikiran.kara@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Series-to: u-boot Series-cc: Phani Kiran Kara <phanikiran.kara@gmail.com>
* common: miiphyutil: Work and report phy address in hex in mdio cmdMichal Simek2016-12-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It is confusing that mdio commands work and report phy id as decimal value when mii is working with hex values. For example: ZynqMP> mdio list gem: 21 - TI DP83867 <--> ethernet@ff0e0000 ZynqMP> mdio read ethernet@ff0e0000 0 Reading from bus gem PHY at address 21: 0 - 0x1140 ZynqMP> mii dump 21 0 Incorrect PHY address. Range should be 0-31 ... ZynqMP> mii dump 15 0. (1140) -- PHY control register -- (8000:0000) 0.15 = 0 reset U-Boot normally takes hex values that's why this patch is changing mdio command to handle hex instead of changing mii command to handle decimal values. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq_gem: Correct SGMII enable bit settingSiva Durga Prasad Paladugu2016-11-151-1/+1
| | | | | | | | | Correct the SGMII enable bit position to 27 instead of 31. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq_gem: Modify the nwcfg bit definitionsSiva Durga Prasad Paladugu2016-11-151-8/+8
| | | | | | | | | Modify the nwcfg bit definitions to have 32-bit by removing the extra nibble. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* treewide: replace #include <asm-generic/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-231-1/+1
| | | | | | | | | | | | | | Now, include/linux/errno.h is a wrapper of <asm-generic/errno.h>. Replace all include directives for <asm-generic/errno.h> with <linux/errno.h>. <asm-generic/...> is supposed to be included from <asm/...> when arch-headers fall back into generic implementation. Generally, they should not be directly included from .c files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Add drivers/usb/host/xhci-rockchip.c] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2016-05-241-5/+9
|\ | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@konsulko.com> Conflicts: drivers/net/zynq_gem.c
| * net: zynq_gem: Add the passing of the phy-handle nodeDan Murphy2016-05-241-5/+10
| | | | | | | | | | | | | | | | | | | | Add the ability to pass the phy-handle node offset to the phy driver. This allows the phy driver to access the DT subnode's data and parse accordingly. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | phy: Wire return value from phy_config()Michal Simek2016-05-241-2/+1
| | | | | | | | | | | | Fix zynq_gem driver to handle error from phy_config correctly. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | net: xilinx: Handle error value from phy_startup()Michal Simek2016-05-241-1/+4
|/ | | | | | | Handle error returned by phy_startup() properly. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Stephen Warren <swarren@nvidia.com>
* net: zynq_gem: Add SGMII support for zynqMPSiva Durga Prasad Paladugu2016-04-041-2/+11
| | | | | | | | | PCS auto negotaiation bit should be enabled along with SGMII autonegotation enabled in phy. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: zynq_gem: Return error incase of invalid phy addressSiva Durga Prasad Paladugu2016-04-041-3/+1
| | | | | | | | Return error from probe in case of invalid phy address. This fixes the issue of uboot crash if phy is not detected. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Allow to set the MAC from an EEPROMJoe Hershberger2016-04-041-0/+18
| | | | | | | | | | Provide board specific option how to read MAC address from ROM. Do it in generic way to be reusable by differnet boards. If this is not enough board specific functions can be created. Signed-off-by: Joe Hershberger <joe.hershberger@gmail.com> # driver part Signed-off-by: Michal Simek <monstr@monstr.eu> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: zynq_gem: Add support for SGMII interfaceSiva Durga Prasad Paladugu2016-04-041-7/+19
| | | | | | | | Add support of SGMII interface for zynq GEM. Read xlnx,emio property from DT. Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: zynq: Change MDC setup for arm64Michal Simek2016-01-271-0/+4
| | | | | | | | | MDC setting depends on pclk input clocks which varies across SoC. This driver is used by xilinx zynq and zynqmp SOC. Input clock frequence on silicon is 125MHz where divider 64 put frequency below 2.5MHz requires by spec (125/64=1.95). Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: zynq_gem: Use shared wait_for_bitMateusz Kulikowski2016-01-251-33/+2
| | | | | Use existing library function to poll bit(s). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
* net: gem: Add driver dependencies to PHYLIBMichal Simek2015-12-181-4/+0
| | | | | | | Clear driver dependecies via Kconfig. Remove PHYLIB dependency from the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Separate recv and free_pkt functionsMichal Simek2015-12-181-20/+32
| | | | | | | | Use core to call net_process_received_packet() instead of call inside the driver. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: gem: Fix return value from recvMichal Simek2015-12-181-1/+1
| | | | | | | | recv function should return 0 instead of frame_len not to proceed the same packet again in core. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: gem: Setup default phy address to -1Michal Simek2015-12-181-1/+2
| | | | | | | Undefined phy address is -1 not 0. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: gem: Enable CTRL+C in wait_for_bitMichal Simek2015-12-071-0/+6
| | | | | | | Enable to break waiting loop at any time. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: gem: Read information about interface from DTMichal Simek2015-12-071-8/+12
| | | | | | | Do not set interface via configs. Read information from DT. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* net: gem: Move driver to DMMichal Simek2015-12-071-69/+110
| | | | | | | | | | | | | - Enable DM_ETH by default for Zynq and ZynqMP - Remove board_eth_init code - Change miiphy_read function to return value instead of error code based on DM requirement - Do not enable EMIO DT support by default Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* net: gem: Fix miiphy_read nameMichal Simek2015-12-071-2/+2
| | | | | | | Sync it with write function. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* net: gem: Remove zynq_gem_of_init()Michal Simek2015-12-071-42/+0
| | | | | | | | | This function was used for OF init before DM. Remove this function as the part of move to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Jagan Teki <jteki@openedev.com>
* net: gem: Enable MDIO bus earlierMichal Simek2015-12-071-5/+9
| | | | | | | Enable access to MDIO before zynq_gem_init is called. It enables read information about phy earlier. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Check if priv->phydev is validMichal Simek2015-12-071-0/+2
| | | | | | | Check return value. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* net: gem: Extract phy init codeMichal Simek2015-12-071-17/+30
| | | | | | | Move phy init code out of zynq_gem_init. DM drivers are normally calling this code from probe function. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Remove phydev variableMichal Simek2015-12-071-13/+10
| | | | | | | Resort code to use priv->phydev variable directly. It will simplify move to DM. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Change mii function not to use eth_device structureMichal Simek2015-12-071-13/+19
| | | | | | | | Next step to move driver to driver model. Do not use eth_device structure. Use private structure instead. Add iobase to private structure to store gem iobase. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Change mdio_wait prototype to pass regsMichal Simek2015-12-071-4/+3
| | | | | | | Pass regs instead of dev because this will be chagned by driver model. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: gem: Do not continue if phy is not foundMichal Simek2015-12-071-4/+10
| | | | | | | | Add return value for phy detection algorithm to stop init function when phy is not found. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Jagan Teki <jteki@openedev.com>
* net: zynq: Fix MDC setting for zynqMichal Simek2015-11-191-1/+1
| | | | | | | | | | | | | Based on spec: "MDC must not exceed 2.5 MHz (MDC is only active during MDIO read and write operations)" Zynq is running on 111MHz. Current setting is 32 which is 111/32=3.47 which is above of 2.5MHz. Using 48 divider will give us correct setting according spec (111/48=2.31). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq: Remove unused MDCCLKDIV2 macroMichal Simek2015-11-191-1/+0
| | | | | | | Driver cleanup. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq: Fix mdc clock division setting for 100Mbit/sMichal Simek2015-11-191-2/+2
| | | | | | | | | | | Using set and clear macro is incorrect because it is not overwritting origin mdc clock division setup. For example origin setup is 8(0b001) and new setup is 64(0b100) which means 0b101 is setup which is 96 divider. Using writel to rewrite all setting like for 1000Mbit/s case. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq: Wait till packet is sentMichal Simek2015-11-191-1/+32
| | | | | | Wait till BD is processed to ensure that packet was sent successfully. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: zynq: Disable secondary queuesEdgar E. Iglesias2015-11-191-0/+26
| | | | | | | | | | | | Zynq has no priority queues. ZynqMP has one priority queue and this change is required to get ethernet working. This patch was not needed on ep108 for uknown reason even it should be used. Tested on Zynq and ZynqMP. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* net: zynq: Add dummy packet to fix packet duplication issueMichal Simek2015-11-191-2/+8
| | | | | | | | | Target is duplicating packets. IP prefetches another BD and process it when the first one is sent. Adding one dummy BD to the chain fix the problem with packet duplication. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq: Do not report TX underrunMichal Simek2015-11-191-2/+0
| | | | | Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: zynq: Setup BD when structures are filledMichal Simek2015-11-191-3/+3
| | | | | | | Fix incorrect sequence in BD handling. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
View Lorry Controller Status