summaryrefslogtreecommitdiff
path: root/drivers/net
Commit message (Collapse)AuthorAgeFilesLines
* net: phy: Add Amlogic Meson GXL Internal PHY supportNeil Armstrong2017-11-174-0/+64
| | | | | | | | | The Amlogic Meson GXL/GXM families embeds an internal RMII Ethernet PHY. The PHY acts as a generic PHY but needs a slight configuration right before it's configuration. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
* driver: net: fsl-mc: Use base 16 in simple_strtoulPrabhakar Kushwaha2017-11-151-1/+1
| | | | | | | | Value provided in MC_MEM_SIZE_ENV_VAR is in hex. Use 16 as base in simple_strtoul. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()Ashish Kumar2017-11-141-1/+1
| | | | | | | | | | The zero value returned from qbman_swp_acquire() is an error condition meaning no free buffer for allocation. Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Kushwaha Prabhakar <prabhakar@freescale.com> [YS: revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* net: sun8i_emac: Fix build for non-H3/H5 SoCsChen-Yu Tsai2017-11-101-0/+3
| | | | | | | | | | | | | Only the H3/H5 SoCs have an internal PHY and its related clock and reset controls. Use an #ifdef to guard the internal PHY control code block so it can be built for other SoCs, such as the A83T or A64. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* sunxi: restore PHYLIB for CONFIG_SUN4I_EMAC usersArtturi Alm2017-11-091-0/+1
| | | | | | | | | due misnaming of CONFIG_SUN4I_EMAC in include/configs/sunxi-common.h, likely missed in: commit 3146f0c017df ("Move PHYLIB to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* sunxi: fix CONFIG_SUNXI_EMAC referencesArtturi Alm2017-11-091-1/+1
| | | | | | | | | fixes CONFIG_SUNXI_EMAC references from drivers/net/Makefile and include/configs/sunxi-common.h likely forgotten in: commit abc3e4df59f5 ("sunxi: Convert SUNXI_EMAC to Kconfig") Signed-off-by: Artturi Alm <artturi.alm@gmail.com> Reviewed-by: Jagan Teki <jagan@openedev.com>
* net: fec_mxc: Change "error frame" message to debug levelFabio Estevam2017-10-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As reported by Jonathan Gray: "After the recent changes to add SimpleNetworkProtocol to efi_loader when booting off mmc via an efi payload that doesn't use SimpleNetworkProtocol U-Boot's fec_mxc driver will now display various "error frame" messages. .... MMC Device 1 not found MMC Device 2 not found MMC Device 3 not found Scanning disks on sata... Found 6 disks reading efi/boot/bootarm.efi 67372 bytes read in 32 ms (2 MiB/s) ## Starting EFI application at 12000000 ... >> OpenBSD/armv7 BOOTARM 1.0 error frame: 0x8f57ec40 0x00003d74 error frame: 0x8f57ec40 0x00007079 error frame: 0x8f57ec40 0x00006964 error frame: 0x8f57ec40 0x00006f6f error frame: 0x8f57ec40 0x0000726f error frame: 0x8f57ec40 0x00002074 error frame: 0x8f57ec40 0x00006f6f" Heinrich Schuchardt explains: "A receive FIFO overrun can be expected if network packages are not processed. With the network patches we check if a package is available quite often." Move the "error frame" messages to debug level so that a clean output log can be seen. Reported-by: Jonathan Gray <jsg@jsg.id.au> Suggested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_IDAshish Kumar2017-10-271-2/+2
| | | | | | | | | | | Since TX delay is now enabled only in PHY_INTERFACE_MODE_RGMII_ID PHY_INTERFACE_MODE_RGMII_TXID. These change where introduced in phy driver in commit 05b29aa0cb68 ("net: phy: realtek: fix enabling of the TX-delay for RTL8211F"). Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* driver: fsl-mc: use calloc instead mallocPrabhakar Kushwaha2017-10-271-18/+21
| | | | | | | | Memory allocated via malloc is not guaranteed to be zeroized. So explicitly use calloc instead of malloc. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* net: Add SMC911X driver to Kconfig, convertAdam Ford2017-10-201-0/+28
| | | | | | | | | | | | | We add the various SMC91XX symbols to drivers/net/Kconfig and then this converts the following to Kconfig: CONFIG_SMC911X CONFIG_SMC911X_BASE CONFIG_SMC911X_16_BIT CONFIG_SMC911X_32_BIT Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Apply to the rest of the tree, re-squash old and new patch] Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2017-10-101-0/+13
|\
| * net: ravb: Add PHY reset GPIO supportMarek Vasut2017-09-241-0/+13
| | | | | | | | | | | | | | | | | | | | | | Add support for obtaining PHY reset GPIO from DT and toggling it before configuring the PHY to put the PHY into defined state. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Cc: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | treewide: replace with error() with pr_err()Masahiro Yamada2017-10-047-85/+85
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot widely uses error() as a bit noisier variant of printf(). This macro causes name conflict with the following line in include/linux/compiler-gcc.h: # define __compiletime_error(message) __attribute__((error(message))) This prevents us from using __compiletime_error(), and makes it difficult to fully sync BUILD_BUG macros with Linux. (Notice Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().) Let's convert error() into now treewide-available pr_err(). Done with the help of Coccinelle, excluing tools/ directory. The semantic patch I used is as follows: // <smpl> @@@@ -error +pr_err (...) // </smpl> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Re-run Coccinelle] Signed-off-by: Tom Rini <trini@konsulko.com>
* | ARM: mvebu: Convert CONFIG_MVNETA to KconfigChris Packham2017-09-261-0/+8
|/ | | | | | | | | This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
* nds32: ftmac100: Fix write mac addr fail problem.rick2017-09-211-1/+6
| | | | | | | After soft reset complete, write mac address immediately will fail. Add delay to work around this problem. Signed-off-by: rick <rick@andestech.com>
* nds32: ftmac100: support cache enable.rick2017-09-211-3/+2
| | | | | | Add cache inval and flush when rx and tx. Signed-off-by: rick <rick@andestech.com>
* net: phy: micrel: Convert to livetreePhilipp Tomsich2017-09-181-3/+2
| | | | | | | | Update the Micrel KSZ90x1 driver for a live tree. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* net: designware: Convert to livetreePhilipp Tomsich2017-09-181-8/+3
| | | | | | | | | Update the Designware Ethernet MAC driver to support a live device tree. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* blk: Remove various places that do flush cache after readBin Meng2017-09-152-4/+0
| | | | | | | | | | | | | | | | All these places seem to inherit the codes from the MMC driver where a FIXME was put in the comment. However the correct operation after read should be cache invalidate, not flush. The underlying drivers should be responsible for the cache operation. Remove these codes completely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stefan Roese <sr@denx.de> Reviewed-by: York Sun <york.sun@nxp.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: York Sun <york.sun@nxp.com>
* armv8: fsl-layerscape: Support to add RGMII for ls1088aqdsAshish Kumar2017-09-112-0/+36
| | | | | | | | | | | | This patch adds support for RGMII protocol NXP's LDPAA2 support RGMII protocol. LS1088A is the first Soc supporting both RGMII and SGMII. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* armv8: ls1088a: Add NXP LS1088A SoC supportAshish Kumar2017-09-112-0/+88
| | | | | | | | | | | | | | | | LS1088A is compliant with the Layerscape Chassis Generation 3 with eight ARM v8 Cortex-A53 cores in 2 cluster, CCI-400, one 64-bit DDR4 SDRAM memory controller with ECC, Data path acceleration architecture 2.0 (DPAA2), Ethernet interfaces (SGMIIs, RGMIIs, QSGMIIs, XFIs), QSPI, IFC, PCIe, SATA, USB, SDXC, DUARTs etc. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Revised commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* drivers:net:fsl-mc: Update MC address calculationPriyanka Jain2017-09-111-2/+9
| | | | | | | | | | | | Update MC address calculation as per MC design requirement of address as least significant 512MB address of MC private allocated memory, i.e. address should point to end address masked with 512MB offset in private DRAM block. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com> [YS: reformatted commit message] Reviewed-by: York Sun <york.sun@nxp.com>
* net: fix typosHeinrich Schuchardt2017-09-073-3/+3
| | | | | | | %s/Desriptor/Descriptor/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net: phy: realtek: fix enabling of the TX-delay for RTL8211FMadalin Bucur2017-09-071-10/+14
| | | | | | | | | | | | | | The old logic always enabled the TX-delay when the phy-mode was set to PHY_INTERFACE_MODE_RGMII. With this patch we enable the TX delay for PHY_INTERFACE_MODE_RGMII_ID and PHY_INTERFACE_MODE_RGMII_TXID and disable it for PHY_INTERFACE_MODE_RGMII. Based on a similar change made in the Linux Realtek PHY driver by Martin Blumenstingl <martin.blumenstingl@googlemail.com>. Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: York Sun <york.sun@nxp.com>
* Merge git://www.denx.de/git/u-boot-imxTom Rini2017-08-161-0/+9
|\ | | | | | | | | | | Update pfla02 for setenv changes and PHYLIB/etc migration to Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
| * net: fec_mxc: adjust prototype of fec_get_miibus() for DM_ETHLothar Waßmann2017-07-281-0/+9
| | | | | | | | | | | | | | | | | | | | | | commit 306dd7dabd64 ("net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH") has broken the build of the fec_mxc driver with CONFIG_DM_ETH enabled because it changed the parameters passed to *fec_get_miibus() without changing the functions prototype. This patch fixes up the prototype of fec_get_miibus() for the DM_ETH case. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
* | env: Rename some other getenv()-related functionsSimon Glass2017-08-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these other functions as well, for consistency: getenv_vlan() getenv_bootm_size() getenv_bootm_low() getenv_bootm_mapsize() env_get_default() Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Rename eth_getenv_enetaddr() to eth_env_get_enetaddr()Simon Glass2017-08-169-15/+15
| | | | | | | | | | | | Rename this function for consistency with env_get(). Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Rename getenv/_f() to env_get()Simon Glass2017-08-166-12/+12
| | | | | | | | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these two functions for consistency. Also add function comments in common.h. Quite a few places use getenv() in a condition context, provoking a warning from checkpatch. These are fixed up in this patch also. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()Simon Glass2017-08-163-3/+3
| | | | | | | | | | | | Rename this function for consistency with env_set(). Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Rename common functions related to setenv()Simon Glass2017-08-161-1/+1
| | | | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename these commonly used functions, for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | env: Rename setenv() to env_set()Simon Glass2017-08-161-2/+2
| | | | | | | | | | | | | | | | We are now using an env_ prefix for environment functions. Rename setenv() for consistency. Also add function comments in common.h. Suggested-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org>
* | driver: net: ldpaa: Update priv->phydev after free()Prabhakar Kushwaha2017-08-141-1/+3
| | | | | | | | | | | | | | | | | | | | Even after memory free of phydev, priv is still pointing to the obsolete address. So update priv->phydev as NULL after memory free. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | net: fman: add support RGMII_TXID to memacMadalin Bucur2017-08-141-1/+3
| | | | | | | | | | Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | net: gmac_rockchip: Add support for the RK3368 GMACPhilipp Tomsich2017-08-131-0/+78
| | | | | | | | | | | | | | | | | | | | | | | | The GMAC in the RK3368 once again is identical to the incarnation in the RK3288 and the RK3399, except for where some of the configuration and control registers are located in the GRF. This adds the RK3368-specific logic necessary to reuse this driver. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-08-111-2/+9
|\ \
| * | driver: net: fsl-mc: fsl_mc_ldpaa_exit exit earlier if dpl appliedSantan Kumar2017-08-091-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In fsl_mc_ldpaa_exit(), in case of mc is booted and dpl is applied, it should return earlier without executing dpbp_exit(). Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Acked-by: Priyanka Jain <priyanka.jain@nxp.com> Acked-by: Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | net: mvpp2x: Set BM poll size once during priv probeStefan Chulski2017-08-101-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set BM poll size once during priv probe and do not overwrite it during port probe procedure. Pool is common for all CP ports. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: remove TX drain from transmit routineStefan Chulski2017-08-101-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TX drain in transmit procedure could cause issues due to race between drain procedure and transmition of descriptor between AGGR TXQ and physical TXQ. TXQ will be cleared before moving to Linux by stop procedure. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: Set BM pool high addressStefan Chulski2017-08-101-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MVPP22 driver support 64 Bit arch and require BM pool high address configuration. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: Remove IRQ configuration from U-BootStefan Chulski2017-08-101-45/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove IRQ configuration from U-Boot PP driver. U-Boot don't use interrupts and configuration of IRQ in U-Boot caused crashes in Linux shared interrupt mode. Also interrupt use is redundant in RX routine since a single RX queue is used. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: remove MBUS configurations from MvPP22 driverStefan Chulski2017-08-101-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | MBUS driver were replaced by AXI in PPv22 and relevant only for PPv21. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: decrease size of AGGR_TXQ and CPU_DESC_CHUNKStefan Chulski2017-08-101-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-boot use single physical tx queue with size 16 descriptors. So aggregated tx queue size should be equal to physical tx queue and cpu descriptor chunk(number of descriptors delivered from physical tx queue to aggregated tx queue by one chunk) shouldn't be larger than physical tx queue. Fix: Set AGGR_TXQ and CPU_DESC_CHUNK to be 16 descriptors, same as physical TXQ. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: fix BM configuration overrun issueStefan Chulski2017-08-101-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: BM counters were overrun by probe that called per Network interface and caused release of wrong number of buffers during remove procedure. Fix: Use probe_done and num_ports to call init and remove procedure once per communication controller. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: Enable GoP packet padding in TXStefan Chulski2017-08-101-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables padding of packets shorter than 64B in TX(set by default). Disabling of padding causes crashes on MACCIATO board. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: fix phy connected to wrong mdio issueStefan Chulski2017-08-101-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A8K marvell SoC has two South Bridge communication controllers(CP0 and CP1). Each communication controller has packet processor ports and MDIO. On MACHIATOBin board ports from CP1 are connected to mdio on CP0. Issue: Wrong base address is assigned to MDIO interface during probe. Fix: Get MDIO address from PHY handler parent base address. This should be refined in the future when MDIO driver is implemented. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: mvpp2x: Add GPIO configuration supportStefan Chulski2017-08-101-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add GPIO configuration support in mvpp2x driver. Driver will handle 10G SFP gpio reset and SFP TX disable. GPIO pins should be set in device tree. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Tested-by: iSoC Platform CI <ykjenk@marvell.com> Reviewed-by: Kostya Porotchkin <kostap@marvell.com> Reviewed-by: Igal Liberman <igall@marvell.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | net: phy: micrel: add an option to disable gigabit for the KSZ9031Sebastien Bourdelin2017-08-071-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | The environment variable "disable_giga" can now be used to disable 1000baseTx on the Micrel's KSZ9031. Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | net: phy: Add AFE settings to the Broadcom Cygnus phyArun Parameswaran2017-08-071-1/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | Added the AFE (Analog Front End) settings for stability to the Broadcom Cygnus phy. This improves the time take to perform auto negotiation. Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | net: move Broadcom SF2 driver to KconfigSuji Velupillai2017-08-072-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | move to Kconfig: CONFIG_BCM_SF2_ETH CONFIG_BCM_SF2_ETH_DEFAULT_PORT CONFIG_BCM_SF2_ETH_GMAC Also modified defconfigs of all platforms that use these configs. Signed-off-by: Suji Velupillai <suji.velupillai@broadcom.com> Tested-by: Suji Velupillai <suji.velupillai@broadcom.com> Reviewed-by: JD Zheng <jiandong.zheng@broadcom.com> Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Steve Rae <steve.rae@raedomain.com> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
View Lorry Controller Status