summaryrefslogtreecommitdiff
path: root/include/configs/microblaze-generic.h
Commit message (Collapse)AuthorAgeFilesLines
* microblaze: Add nor device to distro bootT Karthik Reddy2021-01-041-1/+16
| | | | | | | Add parallel nor device to distroboot for microblaze. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Detect NOR flash based on DTMichal Simek2020-11-201-38/+3
| | | | | | | | | | | | | | Remove fixed configuration and detect flash based on DT. Also increase amount of flash sectors to 2048 because on kc705 flash has 1027 sectors. Bank # 1: CFI conformant flash (16 x 16) Size: 128 MB in 1027 Sectors Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x8962 Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Unify of setting for SPL_NOR/XIP supportMichal Simek2020-11-201-5/+3
| | | | | | | | | | XIP is not enabled in SPL. SPL_NOR is enabled but any macro setting with using SYS_FLASH_BASE are wrong because it is not aligned with DM. That's why change these macro and align them with TEXT_BASE macro. Information should be find at run time based on DT but implementation is not done yet. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Remove CONFIG_SYS_FDT_SIZEMichal Simek2020-11-201-1/+0
| | | | | | CONFIG_SYS_FDT_SIZE is not use anywhere that's why remove it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Get rid of xparameters.hMichal Simek2020-11-201-1/+6
| | | | | | | There is no need to use this file anymore. Include it in main config file and simplify logic based on it. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Simplify cache handlingMichal Simek2020-11-201-14/+2
| | | | | | | Enable caches by default. For now just simplify config file but it should be read from DT or PVRs. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Clean config file from ifdef messMichal Simek2020-11-201-24/+0
| | | | | | | A lot of configs has been moved to Kconfig and it ends up in ifdef mess with no bodies. That's why remove all of them. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Add support for distro bootT Karthik Reddy2020-10-271-2/+47
| | | | | | | | | | | | Add distro boot support for microblaze and enable jtag, qspi, dhcp, pxe boot targets for distro boot. Enable DISTRO_DEFAULTS config in microblaze defconfig and also enable support for spi xilinx driver & spi vendors to access spi flash by distro boot. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: trivial code fixesT Karthik Reddy2020-10-271-9/+10
| | | | | | | Set proper indentation for env variables in microblaze header file. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: start.S: Use board_init_f_alloc/init in early initOvidiu Panait2020-10-271-2/+1
| | | | | | | | | | | Implement early init by calling generic board_init_f_alloc_reserve and board_init_f_init_reserve functions: * drop SYS_MALLOC_F_LEN related code, as allocation and gd->malloc_base assignment are taken care of by the generic functions * drop _gd logic Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
* treewide: Remove CONFIG_SYS_UBOOT_START from configs board filesPatrice Chotard2020-01-081-2/+0
| | | | | | | | | As previous CONFIG_SYS_UBOOT_START is now set by default to CONFIG_SYS_TEXT_BASE when not defined, CONFIG_SYS_UBOOT_START can be removed from include/configs board files. Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Acked-by: Lukasz Majewski <lukma@denx.de>
* env: Finish migration of common ENV optionsTom Rini2019-11-201-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* microblaze: Setup reasonable maximum bootm lenMichal Simek2019-10-081-0/+2
| | | | | | We are far from 8MB default size. Setup 64MB for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Enable cache by defaultMichal Simek2019-10-081-0/+3
| | | | | | | | | | The whole cache code needs to be redesign to read information about cache from DT instead of macro selection. Enable caches by default because systems have caches on by default for Linux. Also enable CMD_CACHE to be able to disable cache if there is any issue. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Move CONFIG_LMB from board file to config.hMichal Simek2019-10-081-3/+0
| | | | | | It is common for the whole architecture that's why move it there. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass2019-08-021-3/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
* Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOTSimon Glass2019-08-021-1/+2
| | | | | | | In order to use CONFIG_PREBOOT with Kconfig, CONFIG_USE_PREBOOT must be defined for each board. To prepare for conversion to Kconfig, add this. Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_ENV_SPI_* to KconfigPatrick Delaunay2019-03-251-3/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_SPI_BUS CONFIG_ENV_SPI_CS CONFIG_ENV_SPI_MAX_HZ CONFIG_ENV_SPI_MODE Most of time these value are not needed, CONFIG_SF_DEFAULT with same value is used, so I introduced CONFIG_USE_ENV_SPI_* to force the associated value for the environment. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* Convert CONFIG_SF_DEFAULT_* to KconfigPatrick Delaunay2019-03-251-4/+0
| | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SF_DEFAULT_BUS CONFIG_SF_DEFAULT_CS CONFIG_SF_DEFAULT_MODE CONFIG_SF_DEFAULT_SPEED I use moveconfig script and then manual check on generated u-boot.cfg to solve the remaining issue. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
* Convert CONFIG_FLASH_CFI_DRIVER et al to KconfigAdam Ford2018-10-191-5/+0
| | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_FLASH_CFI_DRIVER CONFIG_SYS_FLASH_USE_BUFFER_WRITE CONFIG_FLASH_CFI_MTD CONFIG_SYS_FLASH_PROTECTION CONFIG_SYS_FLASH_CFI Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-migrate] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_MII et al to KconfigAdam Ford2018-08-171-3/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_MII CONFIG_DRIVER_TI_EMAC Signed-off-by: Adam Ford <aford173@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Convert CONFIG_MTD_PARTITIONS et al to KconfigAdam Ford2018-07-221-9/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_MTD_PARTITIONS CONFIG_MTD_DEVICE Signed-off-by: Adam Ford <aford173@gmail.com>
* microblaze: Remove XILINX_SPI_FLASH_BASEADDR logicMichal Simek2018-07-191-7/+0
| | | | | | | XILINX_SPI_FLASH_BASEADDR logic has been converted to DM that's why there is no reason to depend on this address anymore. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Convert generic platform to DM gpioMichal Simek2018-07-191-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | Converting GPIO to DM requires to do changes in reset subsystem that's why support for Microblaze soft reset via sysreset and GPIO sysreset support was added. These two patches enables enabling GPIO DM. Microblaze soft reset is bind at last reset method. GPIO reset is handled via sysreset with adding this fragment to DT. gpio-restart { compatible = "gpio-restart"; gpios = <&reset_gpio 0 0 0>; /* 3rd cell ACTIVE_HIGH = 0, ACTIVE_LOW = 1 */ }; hard-reset-gpio property is not documented and also handled. Conversion is required. Unfortunately do_reset is required for SPL that's why use only soft microblaze reset for now. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Delete Xilinx watchdog related macrosShreenidhi Shedi2018-07-191-10/+0
| | | | | | | | These macros are not required anymore. These will be taken from configuration file. Signed-off-by: Shreenidhi Shedi <yesshedi@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* microblaze: Cosmetic changes in Microblaze related filesShreenidhi Shedi2018-07-191-1/+1
| | | | | Signed-off-by: Shreenidhi Shedi <yesshedi@gmail.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* SPDX: Convert all of our single license tags to Linux Kernel styleTom Rini2018-05-071-2/+1
| | | | | | | | | | | | | | | | | | | | When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_SPI to KconfigAdam Ford2018-04-271-1/+0
| | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SPI This partly involves updating code that assumes that CONFIG_SPI implies things that are specific to the MPC8xx SPI driver. For now, just update the CONFIG tests. This also involves reworking the default for CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a reasonable default, as it does not cause any compile failures. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* treewide: Convert CONFIG_HOSTNAME to a string optionMario Six2018-04-081-1/+1
| | | | | | | | | CONFIG_HOSTNAME is defined as a "plain" preprocessor string, but every use is couched by __stringify(...). Hence, convert it to a proper string option. Signed-off-by: Mario Six <mario.six@gdsys.cc>
* microblaze: Added Kconfig support for CONFIG_XILINX_GPIOVipul Kumar2018-03-011-1/+0
| | | | | | | | | This patch added Kconfig support for CONFIG_XILINX_GPIO and enabled it in respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Convert CONFIG_BOOTP_BOOTPATH et al to KconfigAdam Ford2018-02-231-6/+0
| | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_BOOTP_BOOTPATH CONFIG_BOOTP_DNS CONFIG_BOOTP_GATEWAY CONFIG_BOOTP_HOSTNAME CONFIG_BOOTP_PXE CONFIG_BOOTP_SUBNETMASK CONFIG_CMDLINE_EDITING CONFIG_AUTO_COMPLETE CONFIG_SYS_LONGHELP CONFIG_SUPPORT_RAW_INITRD CONFIG_ENV_VARS_UBOOT_CONFIG Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Re-run the migration] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Migrate CONFIG_SPL_FRAMEWORKTom Rini2018-02-141-1/+0
| | | | | | | | | | Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: Tom Rini <trini@konsulko.com>
* microblaze: Moved ethernet PHY configs of Microblaze board to defconfigVipul Kumar2018-01-301-8/+0
| | | | | | | | This patch moved ethernet PHY configs of Microblaze board to respective defconfig. Signed-off-by: Vipul Kumar <vipulk@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* Kconfig: Migrate MTDIDS_DEFAULT / MTDPARTS_DEFAULTTom Rini2017-11-051-4/+0
| | | | | | | | | | We move all instances of CONFIG_MTDIDS_DEFAULT and CONFIG_MTDPARTS_DEFAULT from the header files to the defconfig files. There's a few cases here where we need to expand upon what was in the header file. Tested-by: Adam Ford <aford173@gmail.com> #omap3_logic Signed-off-by: Tom Rini <trini@konsulko.com>
* include/configs: drop default definitions of CONFIG_SYS_PBSIZEThomas Petazzoni2017-09-031-3/+0
| | | | | | | | | Now that the fallback value of CONFIG_SYS_PBSIZE in include/config_fallbacks.h has been adjusted, remove its definition from a large number of board configuration files. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* common: Move CONFIG_BOOTARGS to KconfigSam Protsenko2017-08-141-1/+0
| | | | | | | | | Also introduce CONFIG_USE_BOOTARGS option so we can control if CONFIG_BOOTARGS defined at all. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Resync r8a779[56]_ulcb, various ls10xx targets] Signed-off-by: Tom Rini <trini@konsulko.com>
* spl: moveconfig: remove SPL_LDSCRIPT definitions for header-filesPhilipp Tomsich2017-08-131-2/+0
| | | | | | | | | With the hierarchical defaults set up, we remove these from the header files. To do so, I've run moveconfig on SPL_LDSCRIPT and this commits the changes. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_CMD_SPL to KconfigSimon Glass2017-08-111-1/+0
| | | | | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_SPL Note that trats does not actually use SPL, so this option can no-longer be set. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* Convert CONFIG_CMD_SAVES to KconfigSimon Glass2017-08-111-18/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_SAVES Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* Convert CONFIG_CMD_MMC_SPI to KconfigSimon Glass2017-08-111-1/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_CMD_MMC_SPI Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* configs: Finish migration of PHY_GIGETom Rini2017-08-081-1/+0
| | | | | Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Move PHY_MICREL and PHY_MICREL_KSZ90X1 to KconfigAlexandru Gagniuc2017-08-071-2/+0
| | | | | Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* configs: Replace deprecated Micrel defines with PHY_MICREL_KSZ90X1Alexandru Gagniuc2017-08-071-1/+1
| | | | | | | | | These boards will now use the ksz90x1 driver instead of the mess in ksz8xxx. This change is needed before the two drivers can be fully separated. Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Convert CONFIG_ENV_IS_IN_SPI_FLASH to KconfigSimon Glass2017-07-251-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_SPI_FLASH Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_ENV_IS_IN_FLASH to KconfigSimon Glass2017-07-251-1/+0
| | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_FLASH Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to KconfigSimon Glass2017-07-251-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_ENV_IS_IN_MMC CONFIG_ENV_IS_IN_NAND CONFIG_ENV_IS_IN_UBI CONFIG_ENV_IS_NOWHERE In fact this already exists for sunxi as a 'choice' config. However not all the choices are available in Kconfig yet so we cannot use that. It would lead to more than one option being set. In addition, one purpose of this series is to allow the environment to be stored in more than one place. So the existing choice is converted to a normal config allowing each option to be set independently. There are not many opportunities for Kconfig updates to reduce the size of this patch. This was tested with ./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC And then manual updates. This is because for CHAIN_OF_TRUST boards they can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic now. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Migrate RBTREE, LZO, CMD_MTDPARTS, CMD_UBI and CMD_UBIFSTom Rini2017-07-241-10/+0
| | | | | | | | The above CONFIG options are in Kconfig, and now have correct depends and inter-dependencies. Migrate these to configs/ from include/configs/. In the case of CMD_UBIFS also change it to be a default y if CMD_UBI. Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_CMD_IRQ to KconfigSimon Glass2017-05-221-1/+0
| | | | | | | | This converts the following to Kconfig: CONFIG_CMD_IRQ Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_CMD_JFFS2 to KconfigSimon Glass2017-05-221-2/+0
| | | | | | | This converts the following to Kconfig: CONFIG_CMD_JFFS2 Signed-off-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_SPL_BOARD_INIT to KconfigLey Foon Tan2017-05-221-1/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_SPL_BOARD_INIT Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com> [trini: Update the Kconfig logic] Signed-off-by: Tom Rini <trini@konsulko.com>
View Lorry Controller Status