summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* ARM: MediaTek: add basic support for MT8518 boardsmingming lee2019-12-031-0/+65
| | | | | | | | | | | | | This adds a general board file based on MT8518 SoCs from MediaTek. Apart from the generic parts (cpu) we add some low level init codes and initialize the early clocks. This commit is adding the basic boot support for the MT8518 eMMC board. Signed-off-by: mingming lee <mingming.lee@mediatek.com> [trini: Migrate env location to defconfig, set ENV_IS_IN_MMC] Signeed-off-by: Tom Rini <trini@konsulko.com>
* ARM: omapl138_lcdk: Allow early init to start instruction cacheAdam Ford2019-12-031-1/+1
| | | | | | | | | | | | | | | | Currently the omapl138_lcdk has SKIP_LOWLEVEL_INIT set. The README states there is a variation of this for the ARM926EJ-S which allows the board to just skip the call to lowlevel_init() and do the normal CP15 init which enables the instruction cache. On the da850evm, this was shown to improve startup time. This patch switches SKIP_LOWLEVEL_INIT to SKIP_LOWLEVEL_INIT_ONLY thus, enabling the cache. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
* Convert CONFIG_SYS_CORTINA_FW_IN_MMC et al to KconfigTom Rini2019-12-033-7/+0
| | | | | | | | | | | This converts the following to Kconfig: CONFIG_SYS_CORTINA_FW_IN_MMC CONFIG_SYS_CORTINA_FW_IN_NAND CONFIG_SYS_CORTINA_FW_IN_NOR CONFIG_SYS_CORTINA_FW_IN_REMOTE CONFIG_SYS_CORTINA_FW_IN_SPIFLASH Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_PHY_CORTINA to KconfigTom Rini2019-12-033-3/+0
| | | | | | | This converts the following to Kconfig: CONFIG_PHY_CORTINA Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqWIP/02Dec2019Tom Rini2019-12-026-10/+32
|\ | | | | | | | | - fsl-qoriq : Minor bug fixes and updates on lx2160a, ls1028a, ls1012a, ls1043aqds platforms
| * include/configs: ls1012a: add pfe stop commandBiwen Li2019-11-274-5/+5
| | | | | | | | | | | | | | | | | | | | | | This adds pfe stop command before boot linux kernel to fix a problem that ethernet won't be workable after enter linux. Because there is a h/w limitation in LS1012A PFE, to re-initialize PFE it has to be safe shutdown, these steps are done through PFE stop. Signed-off-by: Biwen Li <biwen.li@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * armv8: ls1043aqds: modify the qspi_bootcmd definitionWen He2019-11-271-2/+2
| | | | | | | | | | | | | | | | Fix the kernel offset of qspi_bootcmd scripts, followed the qoriq_memory_layout definition. Signed-off-by: Wen He <wen.he_1@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
| * armv8: ls1028a: Add environment variables to facilitate the bootYuantian Tang2019-11-271-3/+25
| | | | | | | | | | | | | | Add some environment variables to facilitate the auto boot. Signed-off-by: Yuantian Tang <andy.tang@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2019-12-021-194/+0
|\ \ | | | | | | | | | - MIPS: remove Micronas VCT boards
| * | MIPS: remove Micronas VCT boardsDaniel Schwierzeck2019-11-291-194/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | The deadline for migration to CONFIG_DM is v2020.01. The VCT baords would need an almost complete rewrite of all drivers to support driver model. Unless someone has access to the hardware and volunteers to do the migration, the board should be scheduled for removal. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Acked-by: Stefan Roese <sr@denx.de>
* | stm32mp1: board: add spi nand supportPatrick Delaunay2019-11-261-2/+8
| | | | | | | | | | | | | | | | This patch adds the support of the spi nand device in mtdparts command and in dfu_alt_info. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* | stm32mp1: activate SET_DFU_ALT_INFOPatrick Delaunay2019-11-261-0/+32
|/ | | | | | | | | | | | | | | | | Generate automatically dfu_alt_info for the supported device. The simple command "dfu 0" allows to start the dfu stack on usb 0 for the supported devices: - dfu mtd for nand0 - dfu mtd for nor0 - dfu mmc for SDCard - dfu mmc for eMMC - dfu ram for images in DDR The DUF alternate use the "part", "partubi" and "mmcpart" options to select the correct MTD or GPT partition or the eMMC hw boot partition. Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com> Reviewed-by: Patrice Chotard <patrice.chotard@st.com>
* Merge tag 'rpi-next-2020.01' of https://github.com/mbgg/u-bootWIP/25Nov2019Tom Rini2019-11-251-0/+4
|\ | | | | | | | | | | - add RPi4 upstream compatible to pinctrl - fix boot banner on RPi3/4 - add support for one binary on RPi3/4
| * ARM: bcm283x: Move BCM283x_BASE to a global variableMatthias Brugger2019-11-241-0/+4
| | | | | | | | | | | | | | | | We move the per SOC define BCM283x_BASE to a global variable. This is a first step to provide a single binary for several bcm283x SoCs. Signed-off-by: Matthias Brugger <mbrugger@suse.com>
* | env: Finish migration of common ENV optionsTom Rini2019-11-20485-2210/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
* | env: Remove useless CONFIG_ENV_SIZE_REDUND and fix ENV_IS_REDUND checkTom Rini2019-11-2063-64/+0
|/ | | | | | | | | | | | | | | We have CONFIG_ENV_SIZE_IS_REDUND but don't really use it. We have one board where we can simply multiple CONFIG_ENV_SIZE by two for the same result. The other place where we could but were not previously using this is for where env_internal.h checks for if we should set ENV_IS_EMBEDDED. This seems like the most likely use, historically, of the variable, but it was not used. Add logic to check for this now. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* rockchip: dts: tinker: Add tinker-s board supportMichael Trimarchi2019-11-171-0/+1
| | | | | | | | | | | Support tinker-s board. The board is equivalent of tinker board except of emmc. TODO: - support of usb current burst when the board is powered from pc Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3308: Add support for ROC-RK3308-CC boardAndy Yan2019-11-171-0/+20
| | | | | | | | | ROC-RK3308-CC is a rk3308 based board designed by Firelfy, with eMMC and 256MB DDR3 and RTL8188 Wifi on board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* board: rockchip: Add rk3308 evb supportAndy Yan2019-11-171-0/+20
| | | | | | | Add support for rk3308 evaluation board. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* arm: rockchip: Add RK3308 SOC supportAndy Yan2019-11-171-0/+58
| | | | | | | | | | RK3308 is a quad Cortex A35 based SOC with rich audio interfaces(I2S/PCM/TDM/PDM/SPDIF/VAD/HDMI ARC), which designed for intelligent voice interaction and audio input/output processing. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: rk3399: split rockpro64 out of evb_rk3399Vasily Khoruzhick2019-11-171-0/+15
| | | | | | | | | rockpro64 needs to setup I/O domains in order for USB to work in u-boot. Since we currently don't have a driver to do that, split it into its own board file and initialize I/O domains here. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: add px30-evb boardHeiko Stuebner2019-11-171-0/+19
| | | | | | | | The px30 evb is an evaluation board for the px30 together with a dsi- connected display. This adds board and config files for it. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* rockchip: add core px30 headersHeiko Stuebner2019-11-171-0/+62
| | | | | | | | Add headers needed by the upcoming px30 support, including two new dt-binding headers taken from the Linux kernel. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* defconfigs: Migrate CONFIG_SYS_REDUNDAND_ENVIRONMENTTom Rini2019-11-1235-42/+0
| | | | | | | | Move this symbol to Kconfig. As part of this we can drop a UBI-specific symbol that was a stop-gap for not having this particular symbol in Kconfig. Signed-off-by: Tom Rini <trini@konsulko.com>
* pfla02: Migrate CONFIG_ENV_IS_IN_SPI_FLASH to defconfigTom Rini2019-11-121-1/+0
| | | | | | | | This board is setting CONFIG_ENV_IS_IN_SPI_FLASH in the header rather than defconfig, fix. Cc: Stefano Babic <sbabic@denx.de> Signed-off-by: Tom Rini <trini@konsulko.com>
* evb-rk3128: Migrate CONFIG_ENV_IS_IN_MMC to defconfigTom Rini2019-11-121-1/+0
| | | | | | | | This board is setting CONFIG_ENV_IS_IN_MMC in the header rather than defconfig, fix. Cc: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* Merge tag 'u-boot-imx-20191105' of ↵Tom Rini2019-11-122-0/+164
|\ | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-imx u-boot-imx-20191105 ------------------- i.MX8MN SoC support ROM API image download support i.MX8MM enet enabling
| * imx: imx8mm-evk: enable ethernetPeng Fan2019-11-051-0/+8
| | | | | | | | | | | | | | | | add phy-reset-gpios to reset phy Add board_phy_config to configure phy Enable DM_ETH Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * imx: add i.MX8MN DDR4 board supportPeng Fan2019-11-051-0/+156
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support pinctrl/clk/sdhc, include ddr4 timing data. Log: U-Boot SPL 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) Normal Boot Trying to boot from BOOTROM image offset 0x8000, pagesize 0x200, ivt offset 0x0 U-Boot 2019.10-rc3-00356-g497c500423-dirty (Sep 16 2019 - 10:54:58 +0800) CPU: Freescale i.MX8MNano rev1.0 at 24 MHz Reset cause: POR Model: NXP i.MX8MNano DDR4 EVK board DRAM: 2 GiB MMC: FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | Merge tag 'u-boot-rockchip-20191110' of ↵Tom Rini2019-11-113-3/+3
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip - Add support for rockchip pmic rk805,rk809, rk816, rk817 - Add rk3399 board Leez support - Fix bug in rk3328 ram driver - Adapt SPL to support ATF bl31 with entry at 0x40000 - Fix the u8 type comparision with '-1'. - Fix checkpatch warning for multi blank line and review signature.
| * | rockchip: config: update CONFIG_SPL_MAX_SIZE for 64bit CPUsKever Yang2019-11-103-3/+3
| |/ | | | | | | | | | | | | | | | | | | Since we move the ATF bl31 entry for 64bit CPUs to 0x40000, we need to limit the SPL size in 0x40000(start from 0) so that we don't need to do the relocate for ATF loading. Note that there will be separate BSS, STACK and MALLOC heap, so the size 0x40000(256KB) should be enough for SPL text. Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriqTom Rini2019-11-1110-22/+22
|\ \ | | | | | | | | | | | | | | | - Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC. - Few bug fixes and updates related to SPI, hwconfig, ethernet, fsl-layerscape, pci, icid, PSCI
| * | freescale/powerpc: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal2019-11-083-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Rename the CONFIG_SECURE_BOOT name to CONFIG_NXP_ESBC to avoid conflicts with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
| * | freescale/layerscape: Rename the config CONFIG_SECURE_BOOT nameUdit Agarwal2019-11-087-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | Rename CONFIG_SECURE_BOOT to CONFIG_NXP_ESBC to avoid conflict with UEFI secure boot. Signed-off-by: Udit Agarwal <udit.agarwal@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
* | | arm: add initial support for the Phytium Durian BoardWIP/2019-11-07-master-importsliu hao2019-11-071-0/+44
|/ / | | | | | | | | | | | | | | | | | | | | | | This adds platform code and the device tree for the Phytium Durian Board. The initial support comprises the UART and the PCIE. Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Tom Rini <trini@konsulko.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Steven Hao <liuhao@phytium.com.cn>
* | mpc85xx, socrates: add DM PCI supportHeiko Schocher2019-11-061-9/+0
| | | | | | | | | | | | | | | | add DM PCI support on the socrates board. use PCIE_FSL now. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | mpc85xx, socrates: enable DM serialHeiko Schocher2019-11-061-12/+0
| | | | | | | | | | | | | | switch to DM_SERIAL support. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | mpc85xx, socrates: enable DM I2CHeiko Schocher2019-11-061-17/+1
| | | | | | | | | | | | | | enable DM I2C support for the socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | mpc85xx, socrates: disable VIDEOHeiko Schocher2019-11-061-15/+0
| | | | | | | | | | | | | | disable video, as not really needed longer. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | mpc85xx, socrates: add DM supportHeiko Schocher2019-11-061-6/+7
| | | | | | | | | | | | | | enable CONFIG_DM for the socrates board. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* | mpc85xx, socrates: suppress unknown flash warningHeiko Schocher2019-11-061-0/+1
|/ | | | | | | | suppress warning: Flash: ## Unknown flash on Bank 1 - Size = 0x00000000 = 0 MB Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
* imx: support i.MX8QM ROM 7720 a1 boardOliver Graute2019-11-031-0/+180
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX8QM ROM 7720a1 board support Boot log as below: U-Boot 2019.10-rc3-00004-gd073e0242f (Sep 20 2019 - 08:24:13 +0200) CPU: NXP i.MX8QM RevB A53 at 1200 MHz Model: Advantech iMX8QM Qseven series Board: ROM-7720-A1 4GB Build: SCFW 65afe5f6 Boot: SD2 DRAM: 4 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 Loading Environment from MMC... OK In: serial@5a060000 Out: serial@5a060000 Err: serial@5a060000 Net: eth0: ethernet@5b040000Could not get PHY for FEC1: addr 1 , eth-1: ethernet@5b050000 Hit any key to stop autoboot: 0 Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Simon Glass <sjg@chromium.org> Cc: Ye Li <ye.li@nxp.com> Cc: uboot-imx <uboot-imx@nxp.com>
* board/BuR/brppt2: initial commitHannes Schmelzer2019-11-031-0/+120
| | | | | | | This commit adds support for the brppt2 board. The board is based on the i.mx6 dual-lite SoC. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
* imx8qxp: mek: add secure boot scriptPeng Fan2019-11-031-15/+49
| | | | | | Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <peng.fan@nxp.com>
* imx8qm: mek: add secure boot scriptPeng Fan2019-11-031-15/+49
| | | | | | Add secure boot script, use ahab to verify image Signed-off-by: Peng Fan <peng.fan@nxp.com>
* opos6uldev: migrate to DM_VIDEOSébastien Szymanski2019-11-031-1/+5
| | | | | | | | Migrate to DM_VIDEO, update the device tree and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
* imx6ul: opos6ul: migrate to DM_ETHSébastien Szymanski2019-11-031-8/+0
| | | | | | | Migrate to DM_ETH and remove code that is no longer necessary. Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
* imx: update i.MX8MQ device treesPatrick Wildt2019-11-031-1/+1
| | | | | | | | | | | | | | This updates the i.MX8MQ device trees and, necessarily, also the i.MX8MQ clock bindings. These are taken verbatim from from the Linux kernel version v5.4-rc2, which three small changes which were already part of the previous device tree: * Keep the PSCI reserved memory range * Keep the alias for ethernet, so that the MAC address can be set * Keep the modified #include for the IOMUXC pins Signed-off-by: Patrick Wildt <patrick@blueri.se> Acked-by: Peng Fan <peng.fan@nxp.com>
* ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTBLukasz Majewski2019-11-031-34/+23
| | | | | | | This commit enabled support for fitImage on mccmon6 when we switch to DT/DTS (including falcon mode). Signed-off-by: Lukasz Majewski <lukma@denx.de>
* ARM: imx: Convert mccmon6 to use DM/DTS in the u-boot properLukasz Majewski2019-11-031-13/+0
| | | | | | | | | | This commit converts mccmon6's u-boot proper (in a single commit to avoid build breaks) to use solely DM/DTS. The DTS description of the mccmon6 has been ported from Linux kernel (v4.20, SHA1: 8fe28cb58bcb235034b64cbbb7550a8a43fd88be) Signed-off-by: Lukasz Majewski <lukma@denx.de>
View Lorry Controller Status