summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* i2c: Drop use of CONFIG_I2C_HARDSimon Glass2017-05-1525-428/+182
| | | | | | | | | This option is pretty old. It predates CONFIG_SYS_I2C which is itself deprecated in favour of driver model. Disable it for all boards. Also drop I2C options which depend on this. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2017-05-131-0/+5
|\
| * boston: Bump CONFIG_SYS_BOOTM_LEN to 64MiBPaul Burton2017-05-121-0/+5
| | | | | | | | | | | | | | | | | | | | The default value of CONFIG_SYS_BOOTM_LEN is too small for typical boston Linux kernels. Increase the limit to 64MB, which covers current kernels with plenty of breathing room. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Kconfig: Drop CONFIG_EMAC_MDIO_PHY_NUMTom Rini2017-05-124-4/+0
| | | | | | | | | | | | | | This particular macro hasn't been used in the code for some time, remove these references that were missed. Signed-off-by: Tom Rini <trini@konsulko.com>
* | configs: convert CONFIG_SYS_MPUCLK to KconfigLokesh Vutla2017-05-126-6/+0
| | | | | | | | | | Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | configs: am335x_evm: Enable SPL_DMLokesh Vutla2017-05-112-1/+2
| | | | | | | | | | | | | | Enable SPL_DM on all AM335x based TI platforms. http://patchwork.ozlabs.org/patch/751300/ Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | configs: am335x_evm: Use omap2 generic spl load scriptLokesh Vutla2017-05-1113-13/+13
|/ | | | | | | | No reason to use a separate load script for am33xx than using omap-common load script. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge git://git.denx.de/u-boot-rockchipTom Rini2017-05-101-0/+3
|\ | | | | | | | | | | This adds a new firefly-rk3399 board, MIPI support for rk3399 and rk3288, rk818 pmic support, mkimage improvements for rockchip and a few other things.
| * rockchip: spl: rk3399: spi: enable SPL_SPI_LOAD if SPI is enabled for SPLPhilipp Tomsich2017-05-101-0/+3
| | | | | | | | | | | | | | | | | | | | To include the ability to load from an SPI flash in SPL, it's not sufficient to define SPL_SPI_SUPPORT and SPL_SPI_FLASH_SUPPORT via Kconfig... so we conditionally define SPL_SPI_LOAD if SPI support is already enabled for SPL via Kconfig. Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2017-05-108-0/+177
|\ \ | |/ |/|
| * mips: bmips: add NeufBox 4 (Sercomm) boardÁlvaro Fernández Rojas2017-05-101-0/+20
| | | | | | | | | | | | | | This serves as an example for bcm6358-leds. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add BMIPS Comtrend VR-3032u boardÁlvaro Fernández Rojas2017-05-101-0/+17
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add support for Broadcom MIPS BCM63268 SoC familyÁlvaro Fernández Rojas2017-05-101-0/+25
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add BMIPS Comtrend AR-5387un boardÁlvaro Fernández Rojas2017-05-101-0/+17
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add support for Broadcom MIPS BCM6328 SoC familyÁlvaro Fernández Rojas2017-05-101-0/+25
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add BMIPS Huawei HG556a boardÁlvaro Fernández Rojas2017-05-101-0/+20
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add support for Broadcom MIPS BCM6358 SoC familyÁlvaro Fernández Rojas2017-05-101-0/+30
| | | | | | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * MIPS: add initial infrastructure for Broadcom MIPS SoCsÁlvaro Fernández Rojas2017-05-101-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | CFE checks CPU Thread in a different way (using register $22): mfc0 t1, C0_BCM_CONFIG, 3 # $22 li t2, CP0_CMT_TPID # (1 << 31) and t1, t2 bnez t1, 2f # if we are running on thread 1, skip init nop Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | power: twl4030: Remove CONFIG_TWL4030_POWER from include/configsAdam Ford2017-05-097-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | With the addition of Kconfig now having CONFIG_TWL4030_POWER and with that being the default when OMAP34XX is selected, this is no longer needed in include/configs and can be removed from the whitelist. This has only been tested on logic PD DM3730 using ti_omap3_common.h Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | omap3_logic: Add Device Tree Support and more DM driversAdam Ford2017-05-091-8/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch also removes all the excessive code for NS16550 intiailization as the device tree can do that now. This also adds DM_I2C and DM_MMC since the overlying drivers have the built-in support already. The corresponding include/config/omap3_logic.h also reduced in size due to the new device tree support. Signed-off-by: Adam Ford <aford173@gmail.com> Changes in V2: Retain Auto-detect ability between SOM-LV and Torpedo Split this off from the device sub submissions
* | dm: video: arm: rpi: Convert to use driver model for videoSimon Glass2017-05-091-9/+2
| | | | | | | | | | | | | | | | | | | | | | Adjust the video driver to work with driver model and move over existing baords. There is no need to keep the old code. We can also drop setting of CONFIG_FB_ADDR since driver model doesn't have this problem. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
* | dm: arm: rpi: Move to driver model for USBSimon Glass2017-05-091-5/+0
| | | | | | | | | | | | | | Start using driver model for USB on the Raspberry Pi. The dwc2 supports this now so this is just a config change. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: rpi: Drop CONFIG_CONS_INDEXSimon Glass2017-05-091-1/+0
|/ | | | | | This is not needed now that serial uses driver model. Signed-off-by: Simon Glass <sjg@chromium.org>
* Merge git://git.denx.de/u-boot-dmTom Rini2017-05-097-161/+18
|\
| * configs: at91sam9263ek: Update for DT and DM supportWenyou Yang2017-05-091-24/+2
| | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: at91sam9rlek: Update for DT and DM supportWenyou Yang2017-05-091-22/+2
| | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: at91sam9260ek/9g20ek: Update for DT and DMWenyou Yang2017-05-091-28/+3
| | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: at91sam9m10g45ek: Update to support DM/DTWenyou Yang2017-05-091-29/+2
| | | | | | | | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Because the limitation of internal SRAM size, the SPL with driver model can't be supported, disable the SPL option. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: at91sam9n12ek: Update for DT and DM supportWenyou Yang2017-05-091-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Because the limitation of internal SRAM size, the SPL with driver model can't be supported, disable the SPL option. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: at91sam9x5ek: Update to support DM/DTWenyou Yang2017-05-091-24/+3
| | | | | | | | | | | | | | | | | | | | | | | | Update the configuration files to support the device tree and driver model. The device clock and pins configuration are handled by the clock and the pinctrl drivers respectively. Because the limitation of internal SRAM size, the SPL with driver model can't be supported, disable the SPL option. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * configs: sama5d2_xplained: update for SPLWenyou Yang2017-05-091-4/+4
| | | | | | | | | | | | | | | | Enable config options to support the SPL, increase the malloc memory size for the SPL and board_init_f stage and increase the memory space for the SPL binary. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
| * configs: sama5d2_xplained: enable CONFIG_DM_ETHWenyou Yang2017-05-091-11/+0
| | | | | | | | | | | | | | | | | | Enable CONFIG_DM_ETH to make MACB to support driver model. Because the USB Ether doesn't support driver model so far, remove this feature. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
* | ARM: mvebu: switch db-88f6820-amc to DM for i2cChris Packham2017-05-091-7/+0
| | | | | | | | | | | | | | | | | | Move existing configuration from header file to defconfig or dts as appropriate. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefan Roese <sr@denx.de>
* | arm64: mvebu: a8k: Add NAND configuration parametersKonstantin Porotchkin2017-05-091-0/+11
|/ | | | | | | | | | | Add NAND configuration parameters to A8K shared config file. Add defconfig for db-88f7040 board with boot from NAND setup. Signed-off-by: Konstantin Porotchkin <kostap@marvell.com> Cc: Stefan Roese <sr@denx.de> Cc: Igal Liberman <igall@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Reviewed-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-sunxiTom Rini2017-05-081-1/+8
|\
| * sunxi: video: Add A64/H3/H5 HDMI driverJernej Skrabec2017-04-281-0/+5
| | | | | | | | | | | | | | | | | | This commit adds support for HDMI output. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| * sunxi: i2c: Add support for DM I2CJernej Skrabec2017-04-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for DM I2C on sunxi platform. It can coexist with old style sunxi I2C driver, because it is still used in SPL and by some SoCs. Because sunxi platform doesn't yet support DM clk, reset and pinctrl driver, workaround is needed to enable clocks and set resets and pinctrls. This is done by calling i2c_init_board() in board_init(). This means that CONFIG_I2Cx_ENABLE options needs to be correctly set in order to use needed I2C controller. Commit is based on the previous patch made by Philipp Tomsich Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* | ARM: keystone2: Add support for getting external clock dynamicallyLokesh Vutla2017-05-081-1/+1
| | | | | | | | | | | | | | | | | | | | One some keystone2 platforms like K2G ICE, there is an option to switch between 24MHz or 25MHz as sysclk. But the existing driver assumes it is always 24MHz. Add support for getting all reference clocks dynamically by reading boot pins. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | igep003x: Add netboot supportPau Pajuelo2017-05-081-1/+12
| | | | | | | | | | | | | | | | netboot allows to boot an external image using TFTP and NFS protocols Signed-off-by: Pau Pajuelo <ppajuelo@iseebcn.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
* | igep003x: Add support for IGEP SMARC AM335xPau Pajuelo2017-05-081-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IGEP SMARC AM335x is an industrial processor module with following highlights: o AM3352 TI processor (Up to AM3359) o Cortex-A8 ARM CPU o SMARC form factor module o Up to 512 MB DDR3 SDRAM / 512 MB FLASH o WiFi a/b/g/n and Bluetooth v4.0 on-board o Ethernet 10/100/1000 Mbps and 10/100 Mbps controller on-board o JTAG debug connector available o Designed for industrial range purposes Signed-off-by: Pau Pajuelo <ppajuelo@iseebcn.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
* | igep003x: UBIizeLadislav Michl2017-05-081-18/+27
| | | | | | | | | | | | | | | | | | | | Convert IGEP board to use UBI volumes for U-Boot, its environment and kernel. With exception of first four sectors read by SoC BootROM whole NAND is UBI managed. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Heiko Schocher<hs@denx.de> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
* | igep0033: Rename to igep003xLadislav Michl2017-05-081-6/+3
| | | | | | | | | | | | | | | | Rename igep0033 to igep003x as IGEP SMARC AM335x module (igep0034) can use the same source files. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Tested-by: Pau Pajuelo <ppajuel@gmail.com>
* | stm32f7: remove not needed configuration from board configVikas Manocha2017-05-081-3/+0
| | | | | | | | | | | | | | | | | | This patch removes: - CONFIG_CMD_MEM: enabled by default - CONFIG_DESIGNWARE_ETH : not being used anywhere. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
* | stm32f7: sdram: correct sdram configuration as per micron sdramVikas Manocha2017-05-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Actually the sdram memory on stm32f746 discovery board is micron part MT48LC_4M32_B2B5_6A. This patch does the modification required in the device tree node & driver for the same. Also we are passing here all the timing parameters in terms of clock cycles, so no need to convert time(ns or ms) to cycles. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
* | stm32f7: enable board info read from device treeVikas Manocha2017-05-081-0/+1
| | | | | | | | | | Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
* | stm32f7: stm32f746-disco: read memory info from device treeVikas Manocha2017-05-081-5/+1
| | | | | | | | | | Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
* | stm32f746: to switch on user LED1 & read user buttonVikas Manocha2017-05-081-0/+1
| | | | | | | | | | | | | | | | All discovery boards have one user button & one user LED. Here we are just reading the button status & switching ON the user LED. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com>
* | stm32f7: use stm32f7 gpio driver supporting driver modelVikas Manocha2017-05-081-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | With this gpio driver supporting DM, there is no need to enable clocks for different gpios (for pin muxing) in the board specific code. Need to increase the allocatable area required before relocation from 0x400 to 0xC00 becuase of 10 new gpio devices(& new gpio class) added in device tree. Signed-off-by: Vikas Manocha <vikas.manocha@st.com> cc: Christophe KERELLO <christophe.kerello@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | arm: am57xx: cl-som-am57x: fix USB scanUri Mashiach2017-05-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB bus scan attempt: ----------------------------------cut---------------------------------- => usb start starting USB... USB0: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... data abort pc : [<fff6240e>] lr : [<fff623b3>] reloc pc : [<8081b40e>] lr : [<8081b3b3>] sp : fdf42930 ip : fdf42960 fp : 00000000 r10: 00000001 r9 : fdf42ef0 r8 : 48890020 r7 : 00000002 r6 : fffa5840 r5 : fff8b140 r4 : fdf429c0 r3 : 00000000 r2 : 00000004 r1 : 00000000 r0 : 00000000 Flags: nZcv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... ----------------------------------cut---------------------------------- Fix by enabling USB configuration in the SPL. Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Igor Grinberg <grinberg@compulab.co.il>
* | arm: dra7xx: move CONFIG_DRA7XX to KconfigUri Mashiach2017-05-083-6/+0
| | | | | | | | | | | | | | | | The symbol CONFIG_DRA7XX is needed for Kconfig conditions. Cc: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il> Reviewed-by: Tom Rini <trini@konsulko.com>
View Lorry Controller Status