summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: Move USBNET_HOST_ADDR to KconfigMaxime Ripard2017-10-035-5/+0
| | | | | | | | | While the USB Ethernet device address is already defined in Kconfig, the host address isn't. Convert it. Reviewed-by: Łukasz Majewski <lukma@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
* evb-rk3399: avoid redefinition of CONFIG_ENV_OFFSETHeinrich Schuchardt2017-10-011-6/+0
| | | | | | | | | | | | | | CONFIG_ENV_OFFSET is already defined in include/configs/rockchip-common.h For CONFIG_ROCKCHIP_BACK_TO_BROM=y we redefine CONFIG_ENV_OFFSET to an unsuitable value. We were lucky to get a compiler warning. Remove the incorrect redefinition. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* rk3288: vyasa: Add falcon mode supportJagan Teki2017-10-011-0/+17
| | | | | | | | Add Falcon mode support in vyasa rk3288 board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* rk3288: vyasa: Add TPL supportJagan Teki2017-10-011-1/+5
| | | | | | | | | | | | | Since the size of SPL can't be exceeded 0x8000 bytes in RK3288, it is not possible add new SPL features like Falcon mode or etc. So add TPL stage so-that adding new features to SPL is possible. - TPL: DRAM init, clocks - SPL: MMC, falcon, etc Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* arm: dra7xx: Fix Linux boot from eMMCSam Protsenko2017-09-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by: Tom Rini <trini@konsulko.com> ======================================================================= 0 +--------------------------------+ | MBR/GPT header | 128 - 128 +--------------------------------+ | MLO | 256 - 384 +--------------------------------+ | u-boot.img | 1792 bootloader 2176 +--------------------------------+ | //////////// hole //////////// | 256 - 2432 +--------------------------------+ | U-Boot environment | 128 - 2560 +--------------------------------+ | U-Boot environment (redundant) | 128 - 2688 +--------------------------------+ | rootfs | remaining rootfs end +--------------------------------+ ======================================================================= Guard hole appears because U-Boot environment offset was calculated for Android partition table, which has two additional partitions in place of that hole ("environment" and "misc" partitions). This patch also changes rootfs offset from 2 MiB further to 2688 KiB, so that there won't be any collisions with U-Boot environment when we flash rootfs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* arm: am57xx: Fix Linux boot from eMMCSam Protsenko2017-09-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Right now on OMAP5-based boards we have only one partition defined for Linux boot, which is rootfs. That doesn't work with bootpart=1:2 (that is defined in include/environment/ti/boot.h). To fix Linux boot we may either: 1. Change bootpart to be 1:1 2. Or add preceding partition, so that rootfs is actually 1:2 Second choice seems more reasonable, as DFU is already using similar partition table and can rely on bootpart to be 1:2. This patch adds "bootloader" partition. So now eMMC layout for Linux boot looks like this: offset content size partition (KiB) (KiB) Reviewed-by: Tom Rini <trini@konsulko.com> ======================================================================= 0 +--------------------------------+ | MBR/GPT header | 128 - 128 +--------------------------------+ | MLO | 256 - 384 +--------------------------------+ | u-boot.img | 1792 bootloader 2176 +--------------------------------+ | //////////// hole //////////// | 256 - 2432 +--------------------------------+ | U-Boot environment | 128 - 2560 +--------------------------------+ | U-Boot environment (redundant) | 128 - 2688 +--------------------------------+ | rootfs | remaining rootfs end +--------------------------------+ ======================================================================= Guard hole appears because U-Boot environment offset was calculated for Android partition table, which has two additional partitions in place of that hole ("environment" and "misc" partitions). This patch also changes rootfs offset from 2 MiB further to 2688 KiB, so that there won't be any collisions with U-Boot environment when we flash rootfs. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* configs: keystone2: env: Fix burn_uboot_spi commandLokesh Vutla2017-09-291-1/+1
| | | | | | | | Now the u-boot spi image is greater than 0x80000, increase the same in env during spi erase. Reported-by: Yan Liu <yan-liu@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* configs: k2g_evm: Make findfdt command populate fdtfile variableAndrew F. Davis2017-09-291-1/+1
| | | | | | | | | On all other platforms the command 'findfdt' populates the variable 'fdtfile', but on K2G we only populate 'name_fdt'. The generic boot and automation scripts fail when 'findfdt' is not populated, fix this for K2G. Signed-off-by: Andrew F. Davis <afd@ti.com>
* configs: am43xx_evm: Avoid relocation onto firewall at the end of DRAMAndrew F. Davis2017-09-291-0/+5
| | | | | | | On secure devices the initial secure software may install a firewall at the end of DRAM, define protected RAM to avoid space. Signed-off-by: Andrew F. Davis <afd@ti.com>
* ARM: omap3: am3517-evm: Add device tree and DM supportAdam Ford2017-09-291-13/+1
| | | | | | | | With the device tree ported from Linux 4.13, this enables Driver Model and Device Tree support for the am3517-evm Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
* ARM: da850-evm: Enable DM_I2CAdam Ford2017-09-291-3/+2
| | | | | | | | | | With DM now enabled with the device tree pulled from Linux, we can enable DM_I2C in U-Boot. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Add DM_I2C_COMPAT to da850_am18xxevm to fix warning] Signed-off-by: Tom Rini <trini@konsulko.com>
* arm: da850-evm: Enable MTD Parts in SPI FlashAdam Ford2017-09-291-0/+11
| | | | | | | | | | There is a discrepency between U-Boot and Linux on the partition map. This enabes the MTD parts to pass MTD partition information from U-Boot to Linux. Linux already has a pending patch to enable MTD PARTS in davinci_all_defconfig Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com>
* arm: da850-evm: Enable DM and device tree support for da850-evmAdam Ford2017-09-291-2/+39
| | | | | | | | | | | With the device tree ported and DM compatible drivers, enable: OF_CONTROL, DM_SPI, DM_SPI_FLASH and DM_SERIAL Note: DM_SERIAL is not enabled for da850evm_direct_nor_defconfig yet. Reviewed-by: Jagan Teki <jagan@openedev.com> Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: mvebu: Convert CONFIG_MVNETA to KconfigChris Packham2017-09-261-1/+0
| | | | | | | | | This converts the following to Kconfig: CONFIG_MVNETA Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge git://git.denx.de/u-boot-socfpgaTom Rini2017-09-231-2/+0
|\
| * ARM: socfpga: remove unneeded NAND config optionsMasahiro Yamada2017-09-231-2/+0
| | | | | | | | | | | | | | | | CONFIG_NAND_DENALI select's CONFIG_SYS_NAND_SELF_INIT, so the NAND initialization process is driven by the driver itself. CONFIG_SYS_NAND_MAX_CHIPS and CONFIG_SYS_NAND_BASE are unused. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | armv8: ls1043a: disable IFC in SPL only when QSPI is usedYangbo Lu2017-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | Current u-boot disables IFC support for SD boot on all ls1043a boards. Actually IFC only conflicts with QSPI on ls1043a hardware. Only when QSPI is used, IFC should be disabled. Otherwise, the u-boot with ls1043aqds_sdcard_ifc_defconfig would not work. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | board/ls2080ardb: Add mcmemsize variable in default envPriyanka Jain2017-09-221-0/+1
| | | | | | | | | | | | | | | | | | For most of ls2080ardb use-cases, mc private DRAM block is required to be of 1.75GB. Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> [YS: this reservation needs to be reduced if memory is not enough] Reviewed-by: York Sun <york.sun@nxp.com>
* | board/ls2081ardb: Update QSPI flash type from n25q512a to s25fs512sSantan Kumar2017-09-221-5/+1
| | | | | | | | | | | | | | | | | | | | | | | | As per updated board design, different QSPI flash is connected on boards, hence change QSPI flash type from Micron n25q512a device to spansion s25fs512s device in dts and config. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | board/ls2080ardb: Remove CONFIG_DISPLAY_BOARDINFO_LATESantan Kumar2017-09-221-1/+0
|/ | | | | | | | | | CONFIG_DISPLAY_BOARDINFO_LATE config is used to delay the prints of boardinfo late in cycle during uboot boot. This feature is not required in case of QSPI_BOOT. Signed-off-by: Santan Kumar <santan.kumar@nxp.com> Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* board: Add stm32h7 SoC, discovery and evaluation boards supportPatrice Chotard2017-09-222-0/+102
| | | | | | | | | | | This patch adds support for stm32h7 soc family, stm32h743 discovery and evaluation boards. For more information about STM32H7 series, please visit: http://www.st.com/en/microcontrollers/stm32h7-series.html Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* STiH410-B2260: enable USB Host NetworkingPatrice Chotard2017-09-221-0/+15
| | | | | | | | Enable USB Host Networking support by enabling Ethernet/USB adaptors support and by enabling some BOOTP flags Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* nds32: board: Support SPI driver.rick2017-09-211-2/+13
| | | | | | Add spi dts node and enable spi dm flash config. Signed-off-by: rick <rick@andestech.com>
* nds32: ftmac100 support cache enable.rick2017-09-212-4/+2
| | | | | | Enable cache and ftmac100 performance can be improved. Signed-off-by: rick <rick@andestech.com>
* Merge git://www.denx.de/git/u-boot-imxTom Rini2017-09-202-0/+19
|\
| * board: ge: bx50v3: set eth0 MAC addressIan Ray2017-09-201-0/+15
| | | | | | | | | | | | | | | | Define i2c mux configuration. Add new vpd_reader which is used to read vital product data. Read VPD from EEPROM and set eth0 MAC address. Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Jose Alarcon <jose.alarcon@ge.com>
| * detect and setup solidrun hummingboard2Dennis Gilmore2017-09-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | The hummingboard2 is slightly different to the cubox i and to the hummingboard. The GPIO pin info to probe came from solidruns for of u-boot on github. https://github.com/SolidRun/u-boot-imx6/blob/imx6/board/solidrun/mx6_cubox-i/mx6_cubox-i.c#L569-L589 I have tested on a hummingboard-edge witha imx6 solo and 512mb of ram. Signed-off-by: Dennis Gilmore <dgilmore@redhat.com>
* | rockchip: rk3368: add ENV_MEM_LAYOUT to extra env settingsAndy Yan2017-09-181-0/+1
| | | | | | | | | | | | | | | | Add the ENV_MEM_LAYOUT_SETTINGS to CONFIG_EXTRA_ENV_SETTINGS Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | rk3288: Add Vyasa initial board supportJagan Teki2017-09-181-0/+23
| | | | | | | | | | | | | | | | | | | | This patch adds support for Vyasa RK3288 initial board from Amarula Solutions. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | configs: rockchip: add USB configs for evb-rv1108 boardWilliam Wu2017-09-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds USB configs to support the USB OTG port(consist of DWC2 controller) and the USB Host port(consist of EHCI and OHCI controllers) on evb-rv1108 board, and also support fastboot over USB and USB mass storage. Signed-off-by: William Wu <william.wu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
* | x86: Support Intel Cherry Hill boardBin Meng2017-09-161-0/+22
|/ | | | | | | | | | | | | | | | | This adds support to Intel Cherry Hill board, a board based on Intel Braswell SoC. The following devices are validated: - serial port as the serial console - on-board Realtek 8169 ethernet controller - SATA AHCI controller - EMMC/SDHC controller - USB 3.0 xHCI controller - PCIe x1 slot with a graphics card - ICH SPI controller with an 8MB Macronix SPI flash - Integrated graphics device as the video console Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignmentWenyou Yang2017-09-1411-93/+59
| | | | | | | | To remove the assignment of CONFIG_SYS_EXTRA_OPTIONS option, which is deprecated, use the CONFIG_XXXX_BOOT options to indicate the boot media, and the SoC is selected by the board. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
* ARM: at91: Remove hardware.h included in configsWenyou Yang2017-09-1412-39/+35
| | | | | | | | | | As said in READRE.kconfig, include/configs/*.h will be removed after all options are switched to Kconfig. As the first step, remove the follow line from include/configs/*.h. #include <asm/hardware.h> Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com>
* board: atmel: Add SAMA5D27 SOM1 EK boardWenyou Yang2017-09-141-0/+92
| | | | | | | | | | | The SAMA5D27-SiP (System in Package) integrates the SAMA5D2 with 1Gbit DDR2-SDRAM in a single package. The SAMA5D27 SOM1 embeds a 64Mbit QSPI flash, KSZ8081 Phy and Mac-address EEPROM. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* board: sama5d2_xplained: Make SPL work on spiflashWenyou Yang2017-09-141-1/+1
| | | | | | | | | | | | Because before switching to a lower clock source, we must switch the clock source first instead of last. So before configuring the PMC_MCKR register, invoke at91_mck_init_down() first. As said in datasheet, the the size of SPL must not exceed the maximum size allowed(64Kbytes). Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Convert CONFIG_EMIF4 et al to KconfigAdam Ford2017-09-1311-20/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_EMIF4 CONFIG_SDRC Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stefano Babic <sbabic@denx.de>
* include/configs: remove references to SMNAND_ENV_OFFSETAdam Ford2017-09-1315-44/+28
| | | | | | | | | In mancy cases both CONFIG_ENV_OFFSET and CONFIG_ENV_ADDR point to an otherwise-unused SMNAND_ENV_OFFSET. This patch will set both CONFIG_ENV_OFFSET and CONFIG_ENV_ADDR to whatever value was defined by SMNAND_ENV_OFFSET. Signed-off-by: Adam Ford <aford173@gmail.com>
* ARM: OMAP3: am3517_evm: Move header to ti_omap3_common.hAdam Ford2017-09-121-43/+10
| | | | | | | | | | | | Much of the AM3517 functions are copies of the standard definitions used in ti_omap3_common.h. Moving to include a common file reduces the amount of duplicative code and clutter. A few AM3517 specific functions (like EMIF4) are explictly defined and a few items are undefined or redefined, but overall the number of lines of code shink. Signed-off-by: Adam Ford <aford173@gmail.com> Tested-by: Derald D. Woods <woods.technical@gmail.com>
* configs: k2g_evm: Remove PMMC loading environment commandsAndrew F. Davis2017-09-121-1/+0
| | | | | | | The PMMC firmware should be bundled with the FIT image for HS devices, remove the steps that load and install this firmware outside of FIT. Signed-off-by: Andrew F. Davis <afd@ti.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2017-09-123-0/+936
|\
| * armv8: ls1088a: Enable PCIe in defconfigsHou Zhiqiang2017-09-111-0/+4
| | | | | | | | | | | | | | Enabled PCIe support and PCI command feature. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1088aqds: Add support of LS1088AQDSAshish Kumar2017-09-111-0/+414
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support of LS1088AQDS platform. The LS1088A QorIQTM Development System (QDS) is a high-performance computing, evaluation, and development platform that supports the LS1088A QorIQ Architecture processor. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1088ardb: Add support for LS1088ARDB platformAshish Kumar2017-09-112-0/+518
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1088A is an ARMv8 implementation. The LS1088ARDB is an evaluatoin platform that supports the LS1088A family SoCs. This patch add basic support of the platform. Signed-off-by: Alison Wang <alison.wang@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com> Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> [YS: Disabled NAND in board header file] Reviewed-by: York Sun <york.sun@nxp.com> WIP: disable NAND for LS1088ARDB
* | board: sama5d4_xplained: Set mac address from eepromWenyou Yang2017-09-111-0/+2
| | | | | | | | | | | | | | | | Add the code to set the ethernet mac address from eeprom by using the common code from the common folder. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | board: sama5d2_xplained: Replace code to set mac addressWenyou Yang2017-09-111-4/+0
| | | | | | | | | | | | | | | | Replace the code to set the ethernet mac address with the code from the common folder. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | ipu_common: Let the MX6 IPU clock be calculated in run-timeFabio Estevam2017-09-1120-28/+0
|/ | | | | | | | | | | | | | | | | | MX6Q/QP IPU operates at 264MHz and MX6DL IPU at 198MHz. When running a SPL target, which supports multiple MX6 variants we cannot properly setup the IPU clock frequency via CONFIG_IPUV3_CLK option as such decision is done in build-time currently. Remove the CONFIG_IPUV3_CLK option and let the IPU clock frequency be configured in run-time on mx6. Reported-by: Eric Nelson <eric@nelint.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Eric Nelson <eric@nelint.com> Reviewed-by: Stefano Babic <sbabic@denx.de> [agust: fixed #endif in cgtqmx6eval.h] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* usb: net: migrate USB Ethernet adapters to KconfigChris Packham2017-09-0869-138/+0
| | | | | | | | This migrates ASIX, ASIX88179, MCS7830, RTL8152 and SMSC95XX to Kconfig. Update defconfigs. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: net: migrate CONFIG_USB_HOST_ETHER to KconfigChris Packham2017-09-0871-72/+0
| | | | | | | | | | CONFIG_USB_HOST_ETHER is the framework that the drivers are dependent on USB_HOST_ETHER. Use this as a menu and move the existing LAN75XX and LAN78XX options under new menu. Finally update the defconfigs that need CONFIG_USB_HOST_ETHER. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Kconfig: drop CONFIG_USB_ETHER_RNDISChris Packham2017-09-087-7/+0
| | | | | | | This is not a valid option. Drop it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* Kconfig: drop CONFIG_USB_ETHER_DM9601Chris Packham2017-09-081-1/+0
| | | | | | | This is not a valid option. Drop it. Signed-off-by: Chris Packham <judge.packham@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
View Lorry Controller Status