summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* Convert CONFIG_BOOTCOUNT_LIMIT to KconfigLukasz Majewski2018-02-1522-25/+0
| | | | | | | | | | This converts the following to Kconfig: CONFIG_BOOTCOUNT_LIMIT Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Alex Kiernan <alex.kiernan@gmail.com> Reviewed-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Acked-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
* Revert "drivers/ddr/fsl: Dual-license DDR driver"Tom Rini2018-02-146-6/+6
| | | | | | | Upon further review, not all code authors are in favour of this change. This reverts commit ee3556bcafbb05e59aabdc31368984e76acaabc4. Signed-off-by: Tom Rini <trini@konsulko.com>
* am335x_evm: Consolidate eMMC partitions with DFU infoSam Protsenko2018-02-141-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | >From DFU_ALT_INFO_EMMC (include/environment/ti/dfu.h) we can see that rootfs will be flashed to second partition on eMMC. But at the moment we have only one partition in $partitions environment variable. Let's add "bootloader" partition prior to "rootfs", so that DFU works correctly. This also fixes eMMC boot, which looks for rootfs on second partition. "bootloader" partition start corresponds to "u-boot.img.raw" in DFU eMMC info, which is 0x300 sector (384 KiB offset from eMMC start). rootfs start address can be also found from DFU eMMC info. bootloader-related area is finished at 0x1500 sector (2688 KiB offset from eMMC start). This should be the start address for rootfs in $partitions environment variable. While at it, fix U-Boot environment address to be the same as for AM57x EVM, so that it doesn't clash with other partitions. So now eMMC layout looks like this: =============================================================== 0 +------------------------+ | MBR/GPT header | 128 - 128 +------------------------+ | MLO | 256 - 384 +------------------------+ | u-boot.img | 1792 bootloader 2176 +------------------------+ | //////// hole //////// | 256 - 2432 +------------------------+ | U-Boot environment | 128 - 2560 +------------------------+ | U-Boot environment | 128 - | (redundant) | 2688 +------------------------+ | rootfs | remaining rootfs end +------------------------+ =============================================================== "hole" area can be used further for storing U-Boot environment (like it's done in AM57x EVM config file) or for increasing u-boot.img area (in case u-boot.img size increased, e.g. if new dtbs were added). This commit conforms with Linux partition table from f6d245b8c56c ("arm: am57xx: Fix Linux boot from eMMC") commit, making things in uniform way. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* configs: Migrate CONFIG_SPL_FRAMEWORKTom Rini2018-02-1477-95/+0
| | | | | | | | | | Migrate the option CONFIG_SPL_FRAMEWORK and make this gate most of the current set of options we have in Kconfig. We will need to have some options available for SPL and !SPL_FRAMEWORK so this is important. In a few cases we re-order existing options so that we have less escapes from the SPL_FRAMEWORK guard. Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: Drop unused CONFIG_SPL_MMC_MINIMALTom Rini2018-02-1410-10/+0
| | | | | | The option CONFIG_SPL_MMC_MINIMAL is unused in code, drop it. Signed-off-by: Tom Rini <trini@konsulko.com>
* efi_driver: comment struct efi_driver_opsHeinrich Schuchardt2018-02-131-0/+12
| | | | | | Provide description for struct efi_driver_ops. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* dm: core: fix typo in comment (device.h)Heinrich Schuchardt2018-02-131-1/+1
| | | | | | %s/Indentiies/Identifies/g Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* SystemACE: RemoveTom Rini2018-02-131-1/+0
| | | | | | | | | | | | This driver is no longer used on any supported platform in U-Boot and there is no interest in maintaining it further from people that have used it historically. Cc: Simon Glass <sjg@chromium.org> Cc: Michal Simek <michal.simek@xilinx.com> c: Alexey Brodkin <alexey.brodkin@gmail.com> Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Michal Simek <michal.simek@xilinx.com>
* spi: Migrate CONFIG_CF_SPI to KconfigTuomas Tynkkynen2018-02-135-5/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_KIRKWOOD_SPI to KconfigTuomas Tynkkynen2018-02-133-3/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_LPC32XX_SSP to KconfigTuomas Tynkkynen2018-02-132-2/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_MPC8XXX_SPI to KconfigTuomas Tynkkynen2018-02-132-2/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_MXC_SPI to KconfigTuomas Tynkkynen2018-02-1328-40/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_MXS_SPI to KconfigTuomas Tynkkynen2018-02-131-1/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_SH_QSPI to KconfigTuomas Tynkkynen2018-02-138-8/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* spi: Migrate CONFIG_SH_SPI to KconfigTuomas Tynkkynen2018-02-133-3/+0
| | | | Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* xtfpga: enable hush parserMax Filippov2018-02-131-2/+0
| | | | | | | Remove CONFIG_BOOT_RETRY_TIME as it doesn't do much good and enable CONFIG_HUSH_PARSER in xtfpga_defconfig. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2018-02-128-8/+27
|\
| * drivers/ddr/fsl: Dual-license DDR driverYork Sun2018-02-096-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To make this driver easier to be reused, dual-license DDR driver. Signed-off-by: York Sun <york.sun@nxp.com> CC: Simon Glass <sjg@chromium.org> CC: Tom Rini <trini@konsulko.com> CC: Heinrich Schuchardt <xypron.glpk@gmx.de> CC: Thomas Schaefer <thomas.schaefer@kontron.com> CC: Masahiro Yamada <yamada.masahiro@socionext.com> CC: Robert P. J. Day <rpjday@crashcourse.ca> CC: Alexander Merkle <alexander.merkle@lauterbach.com> CC: Joakim Tjernlund <joakim.tjernlund@transmode.se> CC: Curt Brune <curt@cumulusnetworks.com> CC: Valentin Longchamp <valentin.longchamp@keymile.com> CC: Wolfgang Denk <wd@denx.de> CC: Anatolij Gustschin <agust@denx.de> CC: Ira W. Snyder <iws@ovro.caltech.edu> CC: Marek Vasut <marek.vasut@gmail.com> CC: Kyle Moffett <Kyle.D.Moffett@boeing.com> CC: Sebastien Carlier <sebastien.carlier@gmail.com> CC: Stefan Roese <sr@denx.de> CC: Peter Tyser <ptyser@xes-inc.com> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Peter Tyser <ptyser@xes-inc.com> CC: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * crypto/fsl: instantiate all rng state handlesLukas Auer2018-02-091-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the instantiate_rng() function and the corresponding CAAM job descriptor to instantiate all RNG state handles. This moves the RNG instantiation code in line with the CAAM kernel driver. Previously, only the first state handle was instantiated. The second one was instantiated by the CAAM kernel driver. This works if the kernel runs in secure mode, but fails in non-secure mode since the kernel driver uses DEC0 directly instead of over the job ring interface. Instantiating all RNG state handles in u-boot removes the need for using DEC0 in the kernel driver, making it possible to use the CAAM in non-secure mode. Signed-off-by: Lukas Auer <lukas.auer@aisec.fraunhofer.de> Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: York Sun <york.sun@nxp.com>
| * armv8: ls1012ardb: Add distro secure boot supportVinitha Pillai-B572232018-02-091-2/+18
| | | | | | | | | | | | | | | | | | | | Enable validation of boot.scr script prior to its execution dependent on "secureboot" flag in environment. Enable fall back option to qspi boot in case of secure boot. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Signed-off-by: Vinitha Pillai <vinitha.pillai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | configs: Migrate CONFIG_SYS_TEXT_BASETom Rini2018-02-11277-646/+0
| | | | | | | | | | | | | | | | | | | | | | On the NIOS2 and Xtensa architectures, we do not have CONFIG_SYS_TEXT_BASE set. This is a strict migration of the current values into the defconfig and removing them from the headers. I did not attempt to add more default values in and for now will leave that to maintainers. Signed-off-by: Tom Rini <trini@konsulko.com>
* | efi_loader: correct efi_disk_registerHeinrich Schuchardt2018-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | efi_disk_register should return as status code (efi_status_t). Disks with zero blocks should be reported as 'not ready' without throwing an error. This patch solves a problem running OpenBSD on system configured with CONFIG_BLK=n (e.g. i.MX6). Reported-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Jonathan Gray <jsg@jsg.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_loader: add missing runtime services stubsHeinrich Schuchardt2018-02-101-3/+25
| | | | | | | | | | | | | | | | Add stubs for UpdateCapsule, QueryCapsuleCapabilities, and QueryVariableInfo. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_driver: return type of efi_driver_init()Heinrich Schuchardt2018-02-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | Change the return type of efi_driver_init() to efi_status_t. efi_driver_init() calls efi_add_driver() which returns an efi_status_t value. efi_driver_init() should not subject this value to a conversion to int losing high bits on 64bit systems. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_loader: create stub for CreateEventExHeinrich Schuchardt2018-02-101-1/+8
| | | | | | | | | | | | | | | | | | | | | | Currently we set the function pointer for the CreateEventEx boot service to NULL. When called this would lead to an immediate failure. A function stub is provided which handles the case that the boot service is called without an event group and returns EFI_UNSUPPORTED otherwise. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Alexander Graf <agraf@suse.de>
* | efi_loader: fix building crt0 on armHeinrich Schuchardt2018-02-102-6/+23
|/ | | | | | | | | | | | | | | | | | | | | | Before the patch an undefined constant EFI_SUBSYSTEM was used in the crt0 code. The current version of binutils does not swallow the error. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=888403 The necessary constant IMAGE_SUBSYSTEM_EFI_APPLICATION is already defined in pe.h. So let's factor out asm-generic/pe.h for the image subsystem constants and use it in our assembler code. IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER does not exist in the specification let's use IMAGE_SUBSYSTEM_EFI_ROM instead. The include pe.h is only used in code maintained by Alex so let him be the maintainer here too. Reported-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by: Vagrant Cascadian <vagrant@debian.org> Signed-off-by: Alexander Graf <agraf@suse.de>
* Move most CONFIG_HAVE_BLOCK_DEVICE to KconfigAdam Ford2018-02-084-22/+0
| | | | | | | | | | | config_fallbacks.h has some logic that sets HAVE_BLOCK_DEVICE based on a list of enabled options. Moving HAVE_BLOCK_DEVICE to Kconfig allows us to drastically shrink the logic in config_fallbacks.h Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rename HAVE_BLOCK_DEVICE to CONFIG_BLOCK_DEVICE] Signed-off-by: Tom Rini <trini@konsulko.com>
* block: Migrate SystemACE chip to KconfigTom Rini2018-02-081-4/+0
| | | | | | | | | | | | Migrate the base and sub-options to Kconfig. Note that we only enable this in the base sandbox config now. Cc: Alexey Brodkin <alexey.brodkin@gmail.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Tom Rini <trini@konsulko.com> --- Is this driver still used anywhere? It's fishy that it's only enabled in sandbox anymore.
* Convert LIB_UUID to KconfigAdam Ford2018-02-081-10/+0
| | | | | | | | | config_fallback.h has some logic that checks a variety of options and selects LIB_UUID if it hasn't already been selected. This will all LIB_UUID in Kconfig and select this option for the list of options to allow us to remove the logic from fallbacks Signed-off-by: Adam Ford <aford173@gmail.com>
* Convert CONFIG LIB_HW_RAND to KconfigAdam Ford2018-02-086-15/+0
| | | | | | | | | | | | config_fallbacks.h had some logic to automatically select LIB_RAND if RANDOM_UUID or CMD_UUID were set if LIB_HW_RAND wasn't already selected. By migrating LIB_HW_RAND to Kconfig, we can remove this check from config_fallbacks.h and put it into Kconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lukasz Majewski <lukma@denx.de> [trini: Turn into a choice, add NET_RANDOM_ETHADDR] Signed-off-by: Tom Rini <trini@konsulko.com>
* Convert CONFIG_APBH_DMA et al to KconfigAdam Ford2018-02-0814-41/+0
| | | | | | | | | | | | This converts the following to Kconfig: CONFIG_APBH_DMA CONFIG_APBH_DMA_BURST CONFIG_APBH_DMA_BURST8 Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Stefan Agner <stefan.agner@toradex.com> [trini: Add in MMC as well] Signed-off-by: Tom Rini <trini@konsulko.com>
* configs: stm32: Enable CONFIG_ENV_VARS_UBOOT_CONFIGPatrice Chotard2018-02-086-0/+8
| | | | | | | | | | Enable CONFIG_ENV_VARS_UBOOT_CONFIG for all STM32 boards It allows to retrieve the SoC name into the "soc" environment variable. Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com> Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Reviewed-by: Vikas Manocha <vikas.manocha@st.com>
* Convert CONFIG_NAND_MXS to KconfigStefan Agner2018-02-0811-12/+0
| | | | | | This converts CONFIG_NAND_MXS to Kconfig. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* arm: imx: mx28: Move MX28 selection to KconfigStefan Agner2018-02-086-10/+0
| | | | | | | | | | The motivation for moving MX28 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* arm: imx: mx23: Move MX23 selection to KconfigStefan Agner2018-02-084-8/+0
| | | | | | | | | | The motivation for moving MX23 selection to Kconfig is to be able to better handle NAND MXS selection through Kconfig. This selection method also aligns with the way other i.MX SoCs are selected in U-Boot. Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
* Convert CONFIG_MXC_GPIO to KconfigAdam Ford2018-02-0828-54/+0
| | | | | | | This converts the following to Kconfig: CONFIG_MXC_GPIO Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: imx6q_logic: Move CONFIG_PHY_SMSC to defconfigAdam Ford2018-02-081-1/+0
| | | | | | | Since CONFIG_PHY_SMSC was already in Kconfig, move this from header file to defconfig Signed-off-by: Adam Ford <aford173@gmail.com>
* configs: imx6q_logic: Move CONFIG_MXC_UART to KconfigAdam Ford2018-02-081-2/+0
| | | | | | | | Since CONFIG_MXC_UART is already in Kconfig, move this from the header to imx6q_logic_defconfig Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* ARM: omap3: evm: Remove CONFIG_SYS_NS16550_REG_SIZE undefineDerald D. Woods2018-02-071-3/+0
| | | | | | | | This commit removes an attempt to workaround a previous compilation warning that is is now fixed in "include/configs/ti_omap3_common.h". Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: omap3: ti_omap3_common: Fix CONFIG_SYS_NS16550_REG_SIZE compiler warningDerald D. Woods2018-02-071-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit fixes the following compiler warnings when DM_SERIAL is enabled. ---8<------------------------------------------------------------------- ... CC spl/board/ti/evm/evm.o In file included from /solution/scm/u-boot-master/board/ti/evm/evm.c:16:0: /solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined #define CONFIG_SYS_NS16550_REG_SIZE (-1) In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0, from include/config.h:5, from /solution/scm/u-boot-master/include/common.h:21, from /solution/scm/u-boot-master/board/ti/evm/evm.c:14: /solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition # define CONFIG_SYS_NS16550_REG_SIZE (-4) LD spl/board/ti/evm/built-in.o ... CC spl/drivers/serial/ns16550.o In file included from /solution/scm/u-boot-master/drivers/serial/ns16550.c:11:0: /solution/scm/u-boot-master/include/ns16550.h:31:0: warning: "CONFIG_SYS_NS16550_REG_SIZE" redefined #define CONFIG_SYS_NS16550_REG_SIZE (-1) In file included from /solution/scm/u-boot-master/include/configs/omap3_evm.h:22:0, from include/config.h:5, from /solution/scm/u-boot-master/include/common.h:21, from /solution/scm/u-boot-master/drivers/serial/ns16550.c:7: /solution/scm/u-boot-master/include/configs/ti_omap3_common.h:33:0: note: this is the location of the previous definition # define CONFIG_SYS_NS16550_REG_SIZE (-4) LD spl/drivers/serial/built-in.o ... ---8<------------------------------------------------------------------- Signed-off-by: Derald D. Woods <woods.technical@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* move booti_setup to arch/arm/lig/image.cBin Chen2018-02-071-0/+9
| | | | | | | | | | | | | | Follow bootz's pattern by moving the booti_setup to arch/arm/lib. This allows to use booti_setup in other paths, e.g booting an Android image containing Image format. Note that kernel relocation is move out of booti_setup and it is the caller's responsibility to do it and allows them do it differently. say, cmd/booti.c just do a manually, while in the bootm path, we can use bootm_load_os(with some changes). Signed-off-by: Bin Chen <bin.chen@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* parse the second area of android imageBin Chen2018-02-071-0/+2
| | | | | | | | | | | | | | | The second area of android image was intended to put a 2nd stage bootloader but in practice were rarely used (in my knowledge). An proposal was made to the AOSP to (re)use the second area as the dtb[1], This patch itself doesn't depend on that proposal being accepted but it won't be that helpful as well if that proposal won't be accepted. But don't do any harm as well. [1] https://android-review.googlesource.com/#/c/417447/ Signed-off-by: Bin Chen <bin.chen@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
* Fix FreeBSD endian checksJustin Hibbits2018-02-051-0/+3
| | | | | | FreeBSD, like OpenBSD, uses BIG_ENDIAN, LITTLE_ENDIAN, and BYTE_ORDER, whereas Linux and compatibles use __-prefixed names. Define the names the same as the OpenBSD block below it.
* fpga: Resync various CONFIG_FPGA_* symbolsTuomas Tynkkynen2018-02-055-11/+0
| | | | | | | | | | | | | These are declared in Kconfig, but some #defines have crept in. CONFIG_FPGA CONFIG_FPGA_ALTERA CONFIG_FPGA_CYCLON2 CONFIG_FPGA_SOCFPGA CONFIG_FPGA_XILINX CONFIG_FPGA_ZYNQMPPL Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2018-02-043-2/+72
|\
| * log: add category LOGC_EFIHeinrich Schuchardt2018-02-031-0/+1
| | | | | | | | | | | | | | | | | | The EFI implementation does not fit into any of the existing categories. Provide LOGC_EFI so that EFI related message can be filtered. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Simon Glass <sjg@chromium.org>
| * log: Add a way to log error-return valuesSimon Glass2018-02-031-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When functions return an error it propagates up the stack to the point where it is reported. Often the error code provides enough information about the root cause of the error that this is obvious what went wrong. However in some cases the error may be hard to trace. For example if a driver uses several devices to perform an operation, it may not be obvious which one failed. Add a log_ret() macro to help with this. This can be used to wrap any error-return value. The logging system will then output a log record when the original error is generated, making it easy to trace the call stack of the error. This macro can significantly impact code size, so its use is controlled by a Kconfig option, which is enabled for sandbox. Signed-off-by: Simon Glass <sjg@chromium.org>
| * log: Add control over log formattingSimon Glass2018-02-032-0/+15
| | | | | | | | | | | | | | | | | | It is useful to be able to control the output format of log records on the console. As a starting point, add definitions for controlling which elements of the log record are displayed. Use function and message as the default, since these are the most useful fields. Signed-off-by: Simon Glass <sjg@chromium.org>
| * log: Add functions to convert IDs to/from namesSimon Glass2018-02-031-2/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Category and level both use an enum for their ID values. Add functions to convert these IDs to strings and vice versa. This will allow the log to output the strings instead of the (inscrutable) values. At the same time, add a new 'driver-model' category, to cover core driver-model functions and fix an incorrect value for LOGL_MAX. Tests will be added with the new 'log' subcommands. Signed-off-by: Simon Glass <sjg@chromium.org> (Updated to correct clang warnings)
View Lorry Controller Status