summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'efi-2019-10-rc2' of ↵WIP/04Aug2019Tom Rini2019-08-041-2/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-efi Pull request for UEFI sub-system for v2019.10-rc2 With this pull request a workaround for GRUB on 32bit ARM is re-enabled and made customizable. Without the patch booting on ARM 32bit with GRUB prior to version 2.04 or with a cache which is not managed via CP15 fails. Further work will be needed to achieve a UEFI compliant cache handling. According to the UEFI spec all caches except those that cannot be managed via CP15 should be enabled. An implementation of the ConvertPointer() runtime service is provided. efi_crt0 is always rebuild to avoid having to call 'make mrproper' when switching architectures.
| * efi_loader: definition of efi_virtual_address_map()Heinrich Schuchardt2019-07-301-2/+2
| | | | | | | | | | | | | | Use efi_uintn_t where the UEFI spec uses UINTN. Use efi_uintn_t also for the result of the division of two efi_uintn_t. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
* | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-clkWIP/02Aug2019Tom Rini2019-08-023-0/+68
|\ \ | | | | | | | | | - Port more CCF code to work with i.MX8 devices.
| * | clk: sandbox: add composite clkPeng Fan2019-07-311-0/+1
| | | | | | | | | | | | | | | | | | Add composite clk to sandbox driver Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: gate: support sandboxPeng Fan2019-07-311-0/+3
| | | | | | | | | | | | | | | | | | Introduce io_gate_val for sandbox clk gate test usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: add composite clk supportPeng Fan2019-07-311-0/+22
| | | | | | | | | | | | | | | | | | Import clk composite clk support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk-provider: include clk-uclass.hPeng Fan2019-07-311-0/+1
| | | | | | | | | | | | | | | | | | Because clk-provider use clk_ops, so let's include clk-uclass.h Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: fixed_rate: export clk_fixed_ratePeng Fan2019-07-311-0/+7
| | | | | | | | | | | | | | | | | | Export the structure for others to use. Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: add clk-gate supportPeng Fan2019-07-311-0/+18
| | | | | | | | | | | | | | | | | | Import clk-gate support from Linux Kernel 5.1-rc5 Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: export mux/divider opsPeng Fan2019-07-311-0/+5
| | | | | | | | | | | | | | | | | | Export mux/divider ops and divider_recalc_rate for composite usage Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: mux: add set parent supportPeng Fan2019-07-311-0/+2
| | | | | | | | | | | | | | | | | | Add set parent support for clk mux Signed-off-by: Peng Fan <peng.fan@nxp.com>
| * | clk: introduce clk_dev_bindedPeng Fan2019-07-311-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When support Clock Common Framework, U-Boot use dev for clk tree information, there is no clk->parent. When support composite clk, it contains mux/gate/divider, but the mux/gate/divider is not binded with device. So we could not use dev_get_uclass_priv to get the correct clk_mux/gate/divider. So add clk_dev_binded to let choose the correct method. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* | | autoboot: Add comments for menu_show()Simon Glass2019-08-021-2/+15
| | | | | | | | | | | | | | | | | | | | | Add comments for this function. Also remove the #ifdef around it so that it can be called from 'if (IS_ENABLED(...))'. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Convert CONFIG_AUTOBOOT_MENU_SHOW to KconfigSimon Glass2019-08-022-4/+0
| | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_AUTOBOOT_MENU_SHOW Signed-off-by: Simon Glass <sjg@chromium.org>
* | | autoboot: Rename CONFIG_MENU_SHOW to include AUTOBOOTSimon Glass2019-08-023-3/+3
| | | | | | | | | | | | | | | | | | | | | Rename this option to CONFIG_AUTOBOOT_MENU_SHOW this it relates to the autoboot functionality. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEYSimon Glass2019-08-021-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since this is part of the autoboot functionality, it makes sense to name it with an AUTOBOOT prefix. No mainline boards use it so this should be safe, and downstream boards will need to adjust. Since this option is just an integer value, it really needs another option to control whether the feature is enabled or not. Add a new CONFIG_USE_AUTOBOOT_MENUKEY for that. This fits better with how things are done with Kconfig, avoiding the need to use a specific value to disable the feature. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to KconfigSimon Glass2019-08-0263-241/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_USE_PREBOOT CONFIG_PREBOOT Both are together in one commit, since otherwise the former causes kconfig to define the latter, which gives duplicate symbol errors. Includes a manual fixup for CONFIG_PREBOOT in ids8313_defconfig since the backslash lands in the wrong place. Similarly with socfpga_vining_fpga. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOTSimon Glass2019-08-0259-1/+60
| | | | | | | | | | | | | | | | | | | | | In order to use CONFIG_PREBOOT with Kconfig, CONFIG_USE_PREBOOT must be defined for each board. To prepare for conversion to Kconfig, add this. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Convert CONFIG_SHOW_BOOT_PROGRESS to KconfigSimon Glass2019-08-0214-20/+0
| | | | | | | | | | | | | | | | | | | | | This converts the following to Kconfig: CONFIG_SHOW_BOOT_PROGRESS Signed-off-by: Simon Glass <sjg@chromium.org>
* | | Merge tag 'u-boot-amlogic-20190731' of ↵WIP/31Jul2019Tom Rini2019-07-314-22/+31
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-amlogic - sync Amlogic G12A DT with linux 5.3-rc1 - add support for 4GiB DRAM memory - add support for Amlogic G12B based Odroid-N2 - small duplicate logic fix for gxbb clock driver
| * | | ARM: dts: add support for Odroid-N2Neil Armstrong2019-07-311-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Import HardKernel Odroid-N2 DT from Linux 5.3-rc1, commit 5f9e832c1370 ("Linus 5.3-rc1") based on an Amlogic G12B S922X SoC. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
| * | | ARM: dts: Sync Amlogic G12A with Linux 5.3-rc1Neil Armstrong2019-07-313-22/+18
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Sync the Amlogic Meson G12A DT and Bindings file with the Linux 5.3-rc1 from the commit 5f9e832c1370 ("Linus 5.3-rc1"). Also remove the meson-g12a-u-boot.dtsi and meson-g12a-u200-u-boot.dtsi, now conflicting with the main DT content. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
* | | env: ti: boot: Handle reboot reason from BCBSam Protsenko2019-07-311-2/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of Android boot, reboot reason can be written into BCB (usually it's an area in 'misc' partition). U-Boot then can obtain that reboot reason from BCB and handle it accordingly to achieve correct Android boot flow, like it was suggested in [1]: - if it's empty: perform normal Android boot from eMMC - if it contains "bootonce-bootloader": get into fastboot mode - if it contains "boot-recovery": perform recovery boot The latter is not implemented yet, as it depends on some features that are not implemented on TI platforms yet (in AOSP and in U-Boot). [1] https://marc.info/?l=u-boot&m=152508418909737&w=2 Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* | | Merge tag 'video-for-2019.10-rc1' of ↵WIP/30Jul2019Tom Rini2019-07-301-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-video - fix EDID mode filtering - extend mxc_ipuv3_fb to enable backlight/display - include fb_base in global_data for DM_VIDEO - show frame buffer address via board info as used to be with legacy VIDEO support
| * | | global_data: enable fb_base for DM_VIDEOHeiko Schocher2019-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | with CONFIG_VIDEO we store fb base address in global data fb_base variable. Do this also in DM_VIDEO case. Signed-off-by: Heiko Schocher <hs@denx.de>
* | | | Merge tag 'xilinx-for-v2019.10' of ↵Tom Rini2019-07-305-13/+14
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze Xilinx/FPGA changes for v2019.10 fpga: - Xilinx virtex2 cleanup - Altera cyclon2 cleanup zynq: - Minor Kconfig cleanup - Add psu_init configuration for Z-turn board zynqmp: - Add support for pmufw config passing to PMU - script for psu_init conversion - zcu1275 renaming xilinx: - Add support for UltraZed-EV SoM
| * | | | cmd: fpga: Change return value to avoid printing usage textAlexander Dahl2019-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In cmd/fpga.c the commands should return enum command_ret_t, e.g. CMD_RET_USAGE, CMD_RET_SUCCESS, or CMD_RET_FAILURE. What they actually do is passing a return value from different 'fpga_' functions. Passing on a return value of -1 from a called function leads to printing out usage text. In case of actually correct usage with correctly specified parameters but some fail at runtime printing out that usage text is distracting. The reason is most 'fpga_' functions return either FPGA_SUCCESS or FPGA_FAIL, the latter was equal to -1 which is the same value as CMD_RET_USAGE. So just passing on FPGA_FAIL lead to printing out usage. We should only return CMD_RET_USAGE in cases, where the user sent wrong input. Every other case should return CMD_RET_SUCCESS or CMD_RET_FAILURE, and not simply pass an error code. Simply changing FPGA_FAIL from -1 to 1 gets the job done. Suggested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Alexander Dahl <ada@thorsis.com>
| * | | | fpga: altera: Add some more device sizesAlexander Dahl2019-07-301-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There seems to be only one place, where this is checked against: `altera_validate()`. It should be non zero. Otherwise it is only used to display it, so it probably does not really matter at the moment. But we had the datasheet open anyway … Sizes in datasheet are bit counts, display here is in bytes. Signed-off-by: Alexander Dahl <ada@thorsis.com>
| * | | | fpga: virtex2: Add slave serial programming supportRobert Hancock2019-07-301-10/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for slave serial programming, in addition to the previously supported slave SelectMAP mode. There are two ways that this can be used: -Using the clk and wdata callbacks in order to write image data one bit at a time using pure bit-banging. This works, but is rather painfully slow with typical image sizes. -By specifying the wbulkdata callback instead, the image loading process can be offloaded to SPI hardware. In this mode the clk and wdata callbacks do not need to be specified. This allows the image to be loaded much faster, taking only a few seconds with even relatively large images. Slave serial programming has been tested on the Kintex-7 series of FPGAs. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | | | ARM: zynq: delete long-dead CONFIG_USB_CABLE_CHECKRobert P. J. Day2019-07-302-2/+0
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This Kbuild option disappeared way back in 2014: commit 75504e9592745021006cb8905b5ff5a51d9d1cb3 Author: Mateusz Zalega <m.zalega@samsung.com> Date: Wed Apr 30 13:07:48 2014 +0200 ... snip ... CONFIG_USB_CABLE_CHECK was removed. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-shTom Rini2019-07-302-5/+3
|\ \ \ \ | |/ / / |/| | |
| * | | dt-bindings: Synchronize R-Car Gen3 headers with Linux 5.2Eugeniu Rosca2019-07-232-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport and squash below Linux v5.2 commits: Commit id * Summary line da3e1c57caf93e [1] soc: renesas: r8a77970-sysc: Remove non-existent CR7 power domain b5eb730e031aca [1] soc: renesas: r8a77970-sysc: Correct names of A2DP/A2CN power domains 3961d355dfb512 dt-bindings: power: r8a77965: Remove non-existent A3IR power domain (*) Patch id mismatch between Linux and U-Boot commit [1] Dropped changes in drivers/soc/renesas/r8a77970-sysc.c, since the file doesn't exist in U-Boot. Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
* | | | Merge branch '2019-07-29-ti-imports'Tom Rini2019-07-296-93/+6
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | - More DaVinci DM migration, drop am18xx EVM platform - Keystone bug fix
| * | | | configs: omapl138_lcdk: enable NAND self-init in SPLBartosz Golaszewski2019-07-291-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have enabled the driver-model in SPL, we can remove the code disabling NAND self-init in SPL from the config include for omapl138-lcdk. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
| * | | | davinci: da850-evm: enable driver model for NANDBartosz Golaszewski2019-07-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the driver-model on da850-evm. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Tested-by: Adam Ford <aford173@gmail.com> #da850-evm
| * | | | davinci: omapl138-lcdk: enable driver model for NANDBartosz Golaszewski2019-07-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the driver-model on da850-lcdk. We need to add a dummy nand node to the device tree, as the real nand node is a sub-node of the aemif device. On linux the aemif driver populates all its child nodes, but we can't do it in u-boot currently. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
| * | | | i2c: remove i2c driver-model compatibility layerBartosz Golaszewski2019-07-293-84/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are no more users of the compatibility layer for i2c. Remove the driver and all references to it. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
| * | | | davinci: remove CONFIG_DM_I2C_COMPAT from defconfigsBartosz Golaszewski2019-07-292-9/+0
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This option is no longer used on any davinci board but still selected in defconfigs which causes the following warning: ===================== WARNING ====================== This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list. ==================================================== Remove all references to CONFIG_DM_I2C_COMPAT from davinci. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Heiko Schocher <hs@denx.de>
* | | | Merge branch '2019-07-29-master-imports'Tom Rini2019-07-297-25/+79
|\ \ \ \ | | | | | | | | | | | | | | | - Assorted bug fixes
| * | | | rtc: move RTC_RX8025 to KconfigHeiko Schocher2019-07-293-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | move RTC_RX8025 to Kconfig and fixup board configs. Signed-off-by: Heiko Schocher <hs@denx.de>
| * | | | board: mediatek: Add pumpkin board supportFabien Parent2019-07-291-0/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version: MT8516 SoC and MT8167 SoC. The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header. Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board. The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392. The eMMC and NAND are sharing pins and cannot be used together. This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC. Signed-off-by: Fabien Parent <fparent@baylibre.com>
| * | | | gpio: fixes for gpio-hog supportHeiko Schocher2019-07-291-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recently added gpio hog patch was "in discussion" state with Simon Glass. This patch now adds most of comments from Simon Glass. Signed-off-by: Heiko Schocher <hs@denx.de>
| * | | | common: Move bootm_decomp_image() to image.c (as image_decomp())Julius Werner2019-07-292-17/+17
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Upcoming patches want to add decompression to use cases that are no longer directly related to booting. It makes sense to retain a single decompression routine, but it should no longer be in bootm.c (which is not compiled for all configurations). This patch moves bootm_decomp_image() to image.c and renames it to image_decomp() in preparation of those upcoming patches. Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> [trini: Fix warning around handle_decomp_error being unused] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | Merge https://gitlab.denx.de/u-boot/custodians/u-boot-socfpgaTom Rini2019-07-293-2/+5
|\ \ \ \ | | | | | | | | | | | | | | | - Various gen5 fixes
| * | | | arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"Simon Goldschmidt2019-07-213-2/+5
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes 3 boards that don't use CONFIG_EXTRA_ENV_SETTINGS from socfpga_common.h. They need to enable reset manager compatibility mode unless all peripheral drivers in Linux support reset handling. Fixes: commit 4b2e32efa4e7 ("arm: socfpga: gen5: deassert peripheral reset by default") Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Reported-by: Wolfgang Grandegger <wg@aries-embedded.de>
* | | | Merge tag 'video-for-2019.10' of ↵Tom Rini2019-07-295-4/+43
|\ \ \ \ | | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://gitlab.denx.de/u-boot/custodians/u-boot-video - dcu and imx7 DM_VIDEO conversion - lb070wv8 compatible in simple_panel driver - bmp_logo improvements for DM_VIDEO - EDID updates to filter supported modes - meson_dw_hdmi: support EDID mode filtering - dw_hdmi: support ddc-i2c-bus phandle for external I2C masters - fix rpi crash when firmware doesn't report connected display
| * | | video: dw_hdmi: Add support for ddc-i2c-bus propertyNiklas Schulze2019-07-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the ddc-i2c-bus device tree property which allows for using an external i2c master for reading the display's EDID. Signed-off-by: Niklas Schulze <me@jns.io>
| * | | video: display: use edid_get_timing_validate() variant to filter supported ↵Neil Armstrong2019-07-291-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | EDID modes Introduce a new display op, mode_valid() to be used with the newly introduced edid_get_timing_validate() function, to filter supported monitor timings if handled by the display driver. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * | | edid: add edid_get_timing_validate() variant to filter out edid modesNeil Armstrong2019-07-291-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original edid_get_timing() function returns the first valid timing, but on some plaforms, we could only supports a subset of the listed monitot's navite timing. Let's introduce a edid_get_timing_validate() adding a mode_valid callback including a private cookie pointer. If the callback returns false, the current timing is discared and the next one is checked. If no valid & supported timings are found, the function would return an error. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
| * | | colibri-imx6ull: support building with DM_VIDEO=yIgor Opaniuk2019-07-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. This fixes linking issues when building with DM_VIDEO enabled mxsfb driver. 2. Provide proper defines for both VIDEO=y and DM_VIDEO=y. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
View Lorry Controller Status