summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeFilesLines
* ti_armv7_common: env: Consolidate support for loading images from mmcLokesh Vutla2016-12-035-63/+27
| | | | | | | | | | Support for loading images from mmc is duplicated in all TI platforms. Add this information to DEFAULT_MMC_TI_ARGS so that it can be reused in all TI platforms. Reviewed-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* r2dplus: fixup CONFIG_SYS_TEXT_BASE to account arch/sh changesVladimir Zapolskiy2016-12-021-1/+1
| | | | | | | | | | | | | This change allows to reserve enough space at the end of board SDRAM to store two copies of U-Boot and malloc heap. Due to selection of the CONFIG_SYS_TEXT_BASE the second code/data copying is not avoided, first of all this may depend on a used toolchain, secondly at this point some level of volatility is wanted to do more platform changes and do not care about probably changed calculated in runtime relocation offset. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
* sh: define CONFIG_DISPLAY_BOARDINFO to print board informationVladimir Zapolskiy2016-12-0221-0/+27
| | | | | | | | | All SH boards define a checkboard() function which outputs basic board information on boot, however generic board support requires to define CONFIG_DISPLAY_BOARDINFO to do that, so define it for the boards. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sh: remove undefined DEBUG preprocessor token from board config filesVladimir Zapolskiy2016-12-0214-15/+0
| | | | | | | | | | By default this undef is a noop, moreover at this point when the platform support is broken is prevents debugging of U-boot by manual insertion of #define DEBUG into common files, so it makes sense to remove the option from all SH boards as a harmful one. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sh4: use single u-boot linker script for all boardsVladimir Zapolskiy2016-12-023-3/+0
| | | | | | | | | | | | | | Three supported SH4/SH4A boards with the bootloader image stored on SPI flash have own flavour of a linker script, in turn they are equal among each other. The only difference is that the text from lowlevel_init.o is placed right after start.o, which makes sense. Note that .bss section is not marked as NOLOAD, because for about 10 years this is a default option of a GNU linker, either the attribute is found or not the resulting image file is the same. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* r2dplus: use P1 area space for text base and PCI system memoryVladimir Zapolskiy2016-12-021-5/+5
| | | | | | | | | | | | | While both options are acceptable use P1 area physical addresses instead of external memory space of text base and PCI system memory for unification purposes, all other supported superh boards have the same selection. This allows to easily ensure that CONFIG_SYS_TEXT_BASE is located within available DRAM. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* sh4: remove __io config options from r2dplus and r7780mp boardsVladimir Zapolskiy2016-12-022-2/+0
| | | | | | | | Defined __io is no-op for the SH architecture and it can be removed from board files without any functional change. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* compiler.h: use u-boot endian macros on OpenBSDJonathan Gray2016-12-021-14/+4
| | | | | | | | | | | | | When building u-boot on sparc64 and powerpc hosts it became clear that u-boot expects endian conversion defines to be macros: lib/crc32.c:87: error: braced-group within expression allowed only inside a function For OpenBSD switch from using system definitions equivalent to the u-boot ones and define glibc __BYTE_ORDER __BIG_ENDIAN __LITTLE_ENDIAN names, as at least some parts of the non-cross build assumes those names are present (ie crc32.c). Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
* ARM: am57xx_evm: enable DFU supportSekhar Nori2016-12-021-0/+8
| | | | | | | | | | | | | | | | | AM57xx GP EVM has USB2 port of the SoC exposed as USB client port. It is useful to be able to use this port for USB DFU downloads. Enable USB DFU support. Tested on AM57x GP EVM Rev A3 using DFU to download to connected SD card. configs for HS version of the AM57x EVM are included in the patch but not really tested. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* ARM: ti: consolidate dfu environment variablesSekhar Nori2016-12-025-148/+82
| | | | | | | | | | | | Introduce include/environment/ti/dfu.h that consolidates environment variable definitions for various TI boards that support DFU today. Tested on AM335x EVM, AM437x SK EVM and DRA74x EVM by using DFU to write to SD card. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* scsi: Change scsi_scan() to be able to return valueMichal Simek2016-12-021-1/+1
| | | | | | | | | | With DM_SCSI this function will return more than one return value to cover errors. Suggested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* scsi: Remove completely unused functionsMichal Simek2016-12-021-3/+0
| | | | | | | | | | These functions are not called for any location. This patch removes them scsi_trim_trail(), scsi_get_disk_count() and scsi_setup_read6(). Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* ARM: zynq(mp): remove unneeded CONFIG_USB_MAX_CONTROLLER_COUNT definesMasahiro Yamada2016-12-022-2/+0
| | | | | | | | | | ARCH_ZYNQ(MP) selects DM_USB, where CONFIG_USB_MAX_CONTROLLER_COUNT is not used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
* SPL: mmc: Make spl_mmc_load_image availableMarek Vasut2016-12-011-0/+3
| | | | | | | | | | Make the spl_mmc_load_image() available globally, so it can be invoked directly by SPL on extremely space-constrained systems. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Cc: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: Tinification of the mmc codeMarek Vasut2016-12-011-0/+1
| | | | | | | | | | | | Add new configuration option CONFIG_MMC_TINY which strips away all memory allocation within the MMC code and code for handling multiple cards. This allows extremely space-constrained SPL code use the MMC framework. Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@konsulko.com> Cc: Jaehoon Chung <jh80.chung@samsung.com>
* mmc: add bkops-enable commandTomas Melin2016-12-011-0/+6
| | | | | | | | | | | | Add new command that provides possibility to enable the background operations handshake functionality (BKOPS_EN, EXT_CSD byte [163]) on eMMC devices. This is an optional feature of eMMCs, the setting is write-once. The command must be explicitly taken into use with CONFIG_CMD_BKOPS_ENABLE. Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-11-308-8/+305
|\
| * mx6sx: Add initial support for Samtec VIN|ING 2000 boardChristoph Fritz2016-11-301-0/+123
| | | | | | | | | | | | | | | | This patch adds initial support for Samtec VIN|ING 2000 board. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * imx7: SPI: add suport for SPI flash in mikroBUS slotAngus Ainslie2016-11-291-0/+3
| | | | | | | | | | | | | | | | | | | | Enable the escpi3 nets attached to the mikroBUS slot on the i.MX7 Sabre evalution board. Also enble the SPI flash commands to work with the "flash click" board. This is V2 of this patch with changes recommended by the maintainer CC: Jagan Teki <jteki@openedev.com>
| * arm: mx6: specify SPL paddingStefan Agner2016-11-291-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specify standard padding for payload to 68KB. This is derived from the maximum header size plus maximum SPL size. It matches the already defined offset for SD/eMMC devices (69KB) too. This allows to use the u-boot-with-spl.imx build target to generate a directly flashable image which can be flashed using: dd if=u-boot-with-spl.imx of=/dev/mmcblk0 bs=512 skip=2 While the patch has been created with SD/eMMC in mind, this also works with other boot media. The board file needs to configure the media specific (absolute) payload offset accordingly. Especially the IVT offset is boot media specific and can be retrieved from the reference manual (Table 8-25. Image Vector Table Offset and Initial Load Region Size). For NAND boot a define like this should do the job: #define CONFIG_SYS_NAND_U_BOOT_OFFS (SPL_PAD_TO + 0x400) Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
| * mx6sx: Add initial support for UDOO Neo BoardBreno Lima2016-11-291-0/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UDOO Neo Board is a development board from Seco that has three models: - UDOO Neo Basic - UDOO Neo Basic Kick Starter - UDOO Neo Extended - UDOO Neo Full All versions are based on the i.MX6 SoloX processor. For more details about the UDOO Neo board, please refer to: http://www.udoo.org/udoo-neo/ This work is based on a previous commit of Francesco Montefoschi <francesco.monte@gmail.com>: https://github.com/fmntf/u-boot/commit/877b71184a5105e708024f232d36aed574961844 Only tested on the UDOO Neo Full board. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * colibri_vf: Read kernel and device tree from static UBI volumesSanchayan Maity2016-11-291-3/+3
| | | | | | | | | | | | | | | | Our update scripts write the kernel and device tree in seperate UBI volumes. This allows to use a lot less UBI/UBIFS support in U-Boot, which should lower the risk of hitting bugs in this area. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
| * ARM: ts4600: add basic board supportSebastien Bourdelin2016-11-291-0/+70
| | | | | | | | | | | | | | | | This commit adds basic support including: MMC, Serial console Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * arm: imx: wandboard: fix compile error if CONFIG_VIDEO is deactivatedSven Ebenfeld2016-11-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | When I tried to deactivate VIDEO support for the Wandboard, it still tried to initialize the Framebuffer and so on. That is the reason for the added ifdefs. CONFIG_VIDEO is enabled in the configuration as default and therefore nothing changes for the default user. The structs mx6dl_i2c2_pad_info and mx6q_i2c2_pad_info are only available when CONFIG_IPUV3 are set and should not be tried to access, when that define is not defined. Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
| * Merge branch 'master' of git://git.denx.de/u-bootStefano Babic2016-11-29113-267/+875
| |\ | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | mx35: adjust default environment for flea3 boardHeiko Schocher2016-11-161-5/+4
| | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Heiko Schocher <hs@denx.de>
* | | Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-11-2947-182/+93
|\ \ \
| * | | powerpc: MPC8641HPCN: Remove macro CONFIG_MPC8641HPCNYork Sun2016-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_MPC8641HPCN from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: MPC8641: Remove macro CONFIG_MPC8641York Sun2016-11-233-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_MPC8641 with ARCH_MPC8641 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: MPC8610HPCD: Remove macro CONFIG_MPC8610HPCDYork Sun2016-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_MPC8610HPCD from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: MPC8610: Remove macro CONFIG_MPC8610York Sun2016-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_MPC8610 with ARCH_MPC8610 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4240: Remove macro CONFIG_PPC_T4240York Sun2016-11-232-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T4240 from Kconfig instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4240RDB: Remove macro CONFIG_T4240RDBYork Sun2016-11-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_T4240RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T4240QDS: Remove macro CONFIG_T4240QDSYork Sun2016-11-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_T4240QDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T2080, T2081: Remove macro CONFIG_PPC_T2080 and CONFIG_PPC_T2081York Sun2016-11-231-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_ARCH_T2080 and CONFIG_ARCH_T2081 instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T104xRDB: Remove macro CONFIG_T104xRDB and T104xD4RDBYork Sun2016-11-231-10/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_T104xRDB is defined in T104xRDB.h, so it is always enabled for all T1040RDB, T1040D4RDB, T1042RDB, T1042D4RDB, T1042RDB_PI. CONFIG_T104XD4RDB is defined for all T1040D4RDB, T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042RDB: Remove macro CONFIG_T1042RDBYork Sun2016-11-231-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1042RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042D4RDB: Separate from T1042RDB in KconfigYork Sun2016-11-231-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1042D4RDB in Kconfig to simplify config options. Remove macro CONFIG_T1042D4RDB. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1042RDB_PI: Split from T1042RDB in KconfigYork Sun2016-11-231-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use separated TARGET_T1042RDB_PI to simplify config options. Remove macro CONFIG_T1042RDB_PI. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040RDB: Remove macro CONFIG_T1040RDBYork Sun2016-11-231-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_T1040RDB instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040D4RDB: Separate from T1040RDB in KconfigYork Sun2016-11-231-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use TARGET_T1040D4RDB in Kconfig to simplify config macros. Replace CONFIG_T1040D4RDB with TARGET_T1040D4RDB and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1040: Remove macro CONFIG_PPC_T1040York Sun2016-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1040 with ARCH_T1040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: T1024: Remove macro CONFIG_PPC_T1024York Sun2016-11-232-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_T1024 with ARCH_T1024 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: QEMU_E500: Remove macro CONFIG_QEMU_E500York Sun2016-11-231-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_QEMU_E500 with ARCH_QEMU_E500 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: B4420: Remove macro CONFIG_PPC_B4420York Sun2016-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_B4420 with ARCH_B4420 in Kconfig and clean up existing macros.
| * | | powerpc: B4860QDS: Remove macro CONFIG_B4860QDSYork Sun2016-11-231-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_B4860QDS instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: B4860: Remove macro CONFIG_PPC_B4860York Sun2016-11-231-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_PPC_B4860 with ARCH_B4860 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P5040DS: Remove macro CONFIG_P5040DSYork Sun2016-11-232-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_P5040DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P5040: Remove macro CONFIG_P5040York Sun2016-11-232-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace CONFIG_P5040 with ARCH_P5040 in Kconfig and clean up existing macros. Signed-off-by: York Sun <york.sun@nxp.com>
| * | | powerpc: P5020DS: Remove macro CONFIG_P5020DSYork Sun2016-11-232-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use CONFIG_TARGET_P5020DS instead. Signed-off-by: York Sun <york.sun@nxp.com>
View Lorry Controller Status