From 5ab502cb8900aee483dfba28700640672e0b060e Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 5 Feb 2014 11:28:26 +0900 Subject: dts: move device tree sources to arch/$(ARCH)/dts/ Unlike Linux Kernel, U-Boot historically had *.dts files under board/$(VENDOR)/dts/ and *.dtsi files under arch/$(ARCH)/dts/. I think arch/$(ARCH)/dts dicretory is a better location to store both *.dts and *.dtsi files. For example, before this commit, board/xilinx/dts directory had both Microblaze dts (microblaze-generic.dts) and ARM dts (zynq-*.dts), which are totally unrelated. This commit moves *.dts to arch/$(ARCH)/dts/ directories, allowing us to describe nicely mutiple DTBs generation in the next commit. Signed-off-by: Masahiro Yamada --- arch/arm/dts/tegra20-harmony.dts | 105 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 105 insertions(+) create mode 100644 arch/arm/dts/tegra20-harmony.dts (limited to 'arch/arm/dts/tegra20-harmony.dts') diff --git a/arch/arm/dts/tegra20-harmony.dts b/arch/arm/dts/tegra20-harmony.dts new file mode 100644 index 0000000000..b115f87821 --- /dev/null +++ b/arch/arm/dts/tegra20-harmony.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +#include "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra20 Harmony evaluation board"; + compatible = "nvidia,harmony", "nvidia,tegra20"; + + aliases { + usb0 = "/usb@c5008000"; + usb1 = "/usb@c5004000"; + sdhci0 = "/sdhci@c8000600"; + sdhci1 = "/sdhci@c8000200"; + }; + + memory { + reg = <0x00000000 0x40000000>; + }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + + i2c@7000c000 { + status = "disabled"; + }; + + i2c@7000c400 { + status = "disabled"; + }; + + i2c@7000c500 { + status = "disabled"; + }; + + i2c@7000d000 { + status = "disabled"; + }; + + usb@c5000000 { + status = "disabled"; + }; + + usb@c5004000 { + nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ + }; + + sdhci@c8000200 { + status = "okay"; + cd-gpios = <&gpio 69 1>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + bus-width = <4>; + }; + + sdhci@c8000600 { + status = "okay"; + cd-gpios = <&gpio 58 1>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + bus-width = <8>; + }; + + lcd_panel: panel { + clock = <42430000>; + xres = <1024>; + yres = <600>; + left-margin = <138>; + right-margin = <34>; + hsync-len = <136>; + lower-margin = <4>; + upper-margin = <21>; + vsync-len = <4>; + hsync-active-high; + vsyncx-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 0>; + nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <0 0 200 0 0>; + }; +}; -- cgit v1.2.1